The error path has one case where *table is uninitialized, initialize
it.

Fixes: a0792e2c ("apparmor: make transition table unpack generic so it can be reused")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

The unpack_perms_table() can return error which is negative value. Store
the return value to a signed variable. policy->size is unsigned
variable. It shouldn't be used to store the return status.

Fixes: 2d6b2dea7f3c ("apparmor: add the ability for policy to specify a permission table")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

The apparmor kunit tests are failing on the out of bounds array check
with the following failure

  # policy_unpack_test_unpack_array_out_of_bounds: EXPECTATION FAILED at security/apparmor/policy_unpack_test.c:178
  Expected unpack_array(puf->e, name, &array_size) == 1, but
  unpack_array(puf->e, name, &array_size) == -1
  # policy_unpack_test_unpack_array_out_of_bounds: EXPECTATION FAILED at security/apparmor/policy_unpack_test.c:180
  Expected array_size == 0, but
  array_size == 64192
  not ok 5 - policy_unpack_test_unpack_array_out_of_bounds

This is because unpack_array changed to allow distinguishing between
the array not being present and an error. In the error case the array
size is not set and should not be tested.
Reported-by: kernel test robot <yujie.liu@intel.com>
Fixes: 995a5b64620e ("apparmor: make unpack_array return a trianary value")
Signed-off-by: John Johansen <john.johansen@canonical.com>

The rawdata readback has a few of problems. First if compression is
enabled when the data is read then the compressed data is read out
instead decompressing the data. Second if compression of the data
fails, the code does not handle holding onto the raw_data in
uncompressed form. Third if the compression is enabled/disabled after
the rawdata was loaded, the check against the global control of
whether to use compression does not reflect what was already done to
the data.

Fix these by always storing the compressed size, along with the
original data size even if compression fails or is not used. And use
this to detect whether the rawdata is actually compressed.

Fixes: 52ccc20c652b ("apparmor: use zstd compression for profile data")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Jon Tourville <jon.tourville@canonical.com>

Unfortunately the switch to using zstd compression did not properly
ifdef all the code that uses zstd_ symbols. So that if exporting of
binary policy is disabled in the config the compile will fail with the
following errors

security/apparmor/lsm.c:1545: undefined reference to `zstd_min_clevel'
aarch64-linux-ld: security/apparmor/lsm.c:1545: undefined reference to `zstd_max_clevel'
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 52ccc20c652b ("apparmor: use zstd compression for profile data")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Jon Tourville <jon.tourville@canonical.com>

The decompress ctx was not properly initialized when reading raw
profile data back to userspace.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 52ccc20c652b ("apparmor: use zstd compression for profile data")
Signed-off-by: John Johansen <john.johansen@canonical.com>

The index into the trans_table has a max size of 2^24 bits which the
code was testing but this is unnecessary as unpack_array can only
unpack a table of 2^16 bits in size so the table unpacked will never
be larger than what can be indexed, and any test here is redundant.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

When compute_fperms was moved to policy_compat and made static it
was renamed from aa_compute_fperms to just compute_fperms to help
indicate it is only available statically. Unfortunately the doc
comment did not also get updated to reflect the change.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

Make __aa_path_perm() static as it's only used inside apparmor/file.c.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

In aa_get_task_label(), aa_get_newest_cred_label(__task_cred(task))
can do the same things as aa_get_newest_label(__aa_task_raw_label(task)),
so we can replace it and remove __aa_task_raw_label() to simplify the code.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

The unconfined label flag is not being computed correctly. It
should only be set if all the profiles in the vector are set, which
is different than what is required for the debug and stale flag
that are set if any on the profile flags are set.

Fixes: c1ed5da1 ("apparmor: allow label to carry debug flags")
Signed-off-by: John Johansen <john.johansen@canonical.com>

The class name map did not have the reserved names added. Fix this
Signed-off-by: John Johansen <john.johansen@canonical.com>

Convert profile->rules to a list as the next step towards supporting
multiple rulesets in a profile. For this step only support a single
list entry item. The logic for iterating the list will come as a
separate step.
Signed-off-by: John Johansen <john.johansen@canonical.com>

In preparation for moving from a single set of rules and a single
attachment to multiple rulesets and attachments separate from the
profile refactor attachment information and ruleset info into their
own structures.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Add an additional verification that loaded permission sets don't
overlap in ways that are not intended. This will help ensure that
permission accumulation can't result in an invalid permission set.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Perm accumulation is going to be used much more frequently so let
the compiler figure out if it can be optimized when used.
Signed-off-by: John Johansen <john.johansen@canonical.com>

accumulate permission indexes on a first encountered basis. This
favors original rulesets so that new ones can not override without
profile replacement.
Signed-off-by: John Johansen <john.johansen@canonical.com>

While the dfa xindex's are verified, the indexes in the permission
table are not currently verified. Fix this.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Currently permissions are encoded in the dfa accept entries that are
then mapped to an internal permission structure. This limits the
permissions that userspace can specify, so allow userspace to directly
specify the permission table.
Signed-off-by: John Johansen <john.johansen@canonical.com>

currently unpack_array() does not return an error nor whether the
array is not present. The ability to detect an error or the array
not being present is needed so rework the unpack_array() to return
the needed information.
Signed-off-by: John Johansen <john.johansen@canonical.com>

There are currently three policydb rule groupings (xmatch, file,
policydb) that each do their own slightly different thing. Group them
into a single routine and unify.

This extends/unifies dfa features by
- all dfas are allowed having an optional start field
- all dfas are allowed having a string/transition table
Signed-off-by: John Johansen <john.johansen@canonical.com>

Currently the transition table is tied to the file dfa. Make it so
we can unpack a transition table against any dfa.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Allow the profile to contain a user mode prompt flag. This works similar
to complain mode but will try to send messages to a userspace daemon.
If the daemon is not present or timesout regular informent will occur.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Audit messages currently don't contain the mediation class which can
make them less clear than they should be in some circumstances. With
newer mediation classes coming this potential confusion will become
worse.

Fix this by adding the mediatin class to the messages.
Signed-off-by: John Johansen <john.johansen@canonical.com>

add indexes for label and tag entries. Rename the domain table to the
str_table as its a shared string table with label and tags.
Signed-off-by: John Johansen <john.johansen@canonical.com>

The details of mapping old policy into newer policy formats clutters
up the unpack code and makes it possible to accidentally use old
mappings in code, so isolate the mapping code into its own file.

This will become more important when the dfa remapping code lands,
as it will greatly expand the compat code base.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Allow the xindex to have 2^24 entries.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Now that the permission remapping macros aren't needed anywhere except
during profile unpack, move them.
Signed-off-by: John Johansen <john.johansen@canonical.com>

The policydb permission set has left the xbits unused. Make them
available for mediation.

Note: that this does not bring full auditing control of the
permissions as there are not enough bits. The quieting of denials is
provided as that is used more than forced auditing of allowed
permissions.
Signed-off-by: John Johansen <john.johansen@canonical.com>

the v8 and earlier policy does not encode the locking permission for
no-fs unix sockets. However the kernel is enforcing mediation.

Add the AA_MAY_LOCK perm to v8 and earlier computed perm mask which will
grant permission for all current abi profiles, but still allow specifying
auditing of the operation if needed.

Link: http://bugs.launchpad.net/bugs/1780227Signed-off-by: John Johansen <john.johansen@canonical.com>

The v8 abi is supported by the kernel but the userspace supported
version check does not allow for it. This was missed when v8 was added
due to a bug in the userspace compiler which was setting an older abi
version for v8 encoding (which is forward compatible except on the
network encoding). However it is possible to detect the network
encoding by checking the policydb network support which the code
does. The end result was that missing the abi flag worked until
userspace was fixed and began correctly checking for the v8 abi
version.

Fixes: 56974a6f ("apparmor: add base infastructure for socket mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>

Convert from an unsigned int to a state_t for state position. This is
a step in prepping for the state position carrying some additional
flags, and a limited form of backtracking to support variables.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Remap polidydb dfa accept table from embedded perms to an index, and
then move the perm lookup to use the accept entry as an index into the
perm table. This is done so that the perm table can be separated from
the dfa, allowing dfa accept to index to share expanded permission
sets.
Signed-off-by: John Johansen <john.johansen@canonical.com>

The shared permissions struct has the stop field which is unneeded
and the "reserved" subtree field commented which is needed. Also
reorganize so that the entries are logically grouped.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Remap xmatch dfa accept table from embedded perms to an index and then
move xmatch lookup to use accept entry to index into the xmatch table.

This is step towards unifying permission lookup and reducing the
size of permissions tables.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Remap file dfa accept table from embedded perms to index and then move
fperm lookup to use the accept entry as an index into the fperm table.

This is a step toward unifying permission lookup.
Signed-off-by: John Johansen <john.johansen@canonical.com>

continue permission unification by converting xmatch to use the
policydb struct that is used by the other profile dfas.
Signed-off-by: John Johansen <john.johansen@canonical.com>

file_rules and policydb are almost the same and will need the same
features in the future so combine them.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Rather than computing policydb permissions for each access
permissions can be computed once on profile load and stored for lookup.
Signed-off-by: John Johansen <john.johansen@canonical.com>

Convert xmatch from using perms encoded in the accept entry of the
dfa to the common external aa_perms in a table.
Signed-off-by: John Johansen <john.johansen@canonical.com>