Dimitar Kanaliev says:

====================
Fix truncation bug in coerce_reg_to_size_sx and extend selftests.

This patch series addresses a truncation bug in the eBPF verifier function
coerce_reg_to_size_sx(). The issue was caused by the incorrect ordering
of assignments between 32-bit and 64-bit min/max values, leading to
improper truncation when updating the register state. This issue has been
reported previously by Zac Ecob[1] , but was not followed up on.

The first patch fixes the assignment order in coerce_reg_to_size_sx()
to ensure correct truncation. The subsequent patches add selftests for
coerce_{reg,subreg}_to_size_sx.

Changelog:
	v1 -> v2:
	 - Moved selftests inside the conditional check for cpuv4

[1] (https://lore.kernel.org/bpf/h3qKLDEO6m9nhif0eAQX4fVrqdO0D_OPb0y5HfMK9jBePEKK33wQ3K-bqSVnr0hiZdFZtSJOsbNkcEQGpv_yJk61PAAiO8fUkgMRSO-lB50=@protonmail.com/)
====================

Link: https://lore.kernel.org/r/20241014121155.92887-1-dimitar.kanaliev@siteground.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add a test for unsigned ranges after signed extension instruction. This
case isn't currently covered by existing tests in verifier_movsx.c.
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241014121155.92887-4-dimitar.kanaliev@siteground.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add test that checks whether unsigned ranges deduced by the verifier for
sign extension instruction is correct. Without previous patch that
fixes truncation in coerce_reg_to_size_sx() this test fails.
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241014121155.92887-3-dimitar.kanaliev@siteground.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

coerce_reg_to_size_sx() updates the register state after a sign-extension
operation. However, there's a bug in the assignment order of the unsigned
min/max values, leading to incorrect truncation:

  0: (85) call bpf_get_prandom_u32#7    ; R0_w=scalar()
  1: (57) r0 &= 1                       ; R0_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1,var_off=(0x0; 0x1))
  2: (07) r0 += 254                     ; R0_w=scalar(smin=umin=smin32=umin32=254,smax=umax=smax32=umax32=255,var_off=(0xfe; 0x1))
  3: (bf) r0 = (s8)r0                   ; R0_w=scalar(smin=smin32=-2,smax=smax32=-1,umin=umin32=0xfffffffe,umax=0xffffffff,var_off=(0xfffffffffffffffe; 0x1))

In the current implementation, the unsigned 32-bit min/max values
(u32_min_value and u32_max_value) are assigned directly from the 64-bit
signed min/max values (s64_min and s64_max):

  reg->umin_value = reg->u32_min_value = s64_min;
  reg->umax_value = reg->u32_max_value = s64_max;

Due to the chain assigmnent, this is equivalent to:

  reg->u32_min_value = s64_min;  // Unintended truncation
  reg->umin_value = reg->u32_min_value;
  reg->u32_max_value = s64_max;  // Unintended truncation
  reg->umax_value = reg->u32_max_value;

Fixes: 1f9a1ea8 ("bpf: Support new sign-extension load insns")
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20241014121155.92887-2-dimitar.kanaliev@siteground.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add assertions in `bpf_link_info.uprobe_multi` test to verify that
`count` and `path_size` fields are correctly populated when the fields
are unset.

This tests a previous bug where the `path_size` field was not populated
when `path` and `path_size` were unset.
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011000803.681190-2-wudevelops@gmail.com

Previously when retrieving `bpf_link_info.uprobe_multi` with `path` and
`path_size` fields unset, the `path_size` field is not populated
(remains 0). This behavior was inconsistent with how other input/output
string buffer fields work, as the field should be populated in cases
when:
- both buffer and length are set (currently works as expected)
- both buffer and length are unset (not working as expected)

This patch now fills the `path_size` field when `path` and `path_size`
are unset.

Fixes: e56fdbfb ("bpf: Add link_info support for uprobe multi link")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011000803.681190-1-wudevelops@gmail.com

Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but
falls back to using 'ld' if unsupported. However, this fallback discards
any existing makefile macro for LD and can break cross-compilation.

Fix by changing the fallback to use the target linker $(LD), passed via
'-fuse-ld=' using an absolute path rather than a linker "flavour".

Fixes: 08c79c9c ("selftests/bpf: Don't force lld on non-x86 architectures")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241009040720.635260-1-tony.ambardar@gmail.com

Toke Høiland-Jørgensen says:

====================
Fix caching of BTF for kfuncs in the verifier

When playing around with defining kfuncs in some custom modules, we
noticed that if a BPF program calls two functions with the same
signature in two different modules, the function from the wrong module
may sometimes end up being called. Whether this happens depends on the
order of the calls in the BPF program, which turns out to be due to the
use of sort() inside __find_kfunc_desc_btf() in the verifier code.

This series contains a fix for the issue (first patch), and a selftest
to trigger it (last patch). The middle commit is a small refactor to
expose the module loading helper functions in testing_helpers.c. See the
individual patch descriptions for more details.

Changes in v2:
- Drop patch that refactors module building in selftests (Alexei)
- Get rid of expect_val function argument in selftest (Jiri)
- Collect ACKs
- Link to v1: https://lore.kernel.org/r/20241008-fix-kfunc-btf-caching-for-modules-v1-0-dfefd9aa4318@redhat.com

====================

Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-0-745af6c1af98@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add a test case for kfuncs from multiple external modules, checking
that the correct kfuncs are called regardless of which order they're
called in. Specifically, check that calling the kfuncs in an order
different from the one the modules' BTF are loaded in works.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-3-745af6c1af98@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Generalize the previous [un]load_bpf_testmod() helpers (in
testing_helpers.c) to the more generic [un]load_module(), which can
load an arbitrary kernel module by name. This allows future selftests
to more easily load custom kernel modules other than bpf_testmod.ko.
Refactor [un]load_bpf_testmod() to wrap this new helper.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-2-745af6c1af98@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The verifier contains a cache for looking up module BTF objects when
calling kfuncs defined in modules. This cache uses a 'struct
bpf_kfunc_btf_tab', which contains a sorted list of BTF objects that
were already seen in the current verifier run, and the BTF objects are
looked up by the offset stored in the relocated call instruction using
bsearch().

The first time a given offset is seen, the module BTF is loaded from the
file descriptor passed in by libbpf, and stored into the cache. However,
there's a bug in the code storing the new entry: it stores a pointer to
the new cache entry, then calls sort() to keep the cache sorted for the
next lookup using bsearch(), and then returns the entry that was just
stored through the stored pointer. However, because sort() modifies the
list of entries in place *by value*, the stored pointer may no longer
point to the right entry, in which case the wrong BTF object will be
returned.

The end result of this is an intermittent bug where, if a BPF program
calls two functions with the same signature in two different modules,
the function from the wrong module may sometimes end up being called.
Whether this happens depends on the order of the calls in the BPF
program (as that affects whether sort() reorders the array of BTF
objects), making it especially hard to track down. Simon, credited as
reporter below, spent significant effort analysing and creating a
reproducer for this issue. The reproducer is added as a selftest in a
subsequent patch.

The fix is straight forward: simply don't use the stored pointer after
calling sort(). Since we already have an on-stack pointer to the BTF
object itself at the point where the function return, just use that, and
populate it from the cache entry in the branch where the lookup
succeeds.

Fixes: 2357672c ("bpf: Introduce BPF support for kernel module function calls")
Reported-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-1-745af6c1af98@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Existing code calls connect() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:

In file included from cgroup_ancestor.c:3:
cgroup_ancestor.c: In function 'send_datagram':
cgroup_ancestor.c:38:38: error: passing argument 2 of 'connect' from incompatible pointer type [-Werror=incompatible-pointer-types]
   38 |         if (!ASSERT_OK(connect(sock, &addr, sizeof(addr)), "connect")) {
      |                                      ^~~~~
      |                                      |
      |                                      struct sockaddr_in6 *
./test_progs.h:343:29: note: in definition of macro 'ASSERT_OK'
  343 |         long long ___res = (res);                                       \
      |                             ^~~
In file included from .../netinet/in.h:10,
                 from .../arpa/inet.h:9,
                 from ./test_progs.h:17:
.../sys/socket.h:386:19: note: expected 'const struct sockaddr *' but argument is of type 'struct sockaddr_in6 *'
  386 | int connect (int, const struct sockaddr *, socklen_t);
      |                   ^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

This only compiles because of a glibc extension allowing declaration of the
argument as a "transparent union" which includes both types above.

Explicitly cast the argument to allow compiling for both musl and glibc.

Cc: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Fixes: f957c230 ("selftests/bpf: convert test_skb_cgroup_id_user to test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008231232.634047-1-tony.ambardar@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When CONFIG_CFI_CLANG is enabled, the number of prologue instructions
skipped by tailcall needs to include the kcfi instruction, otherwise the
TCC will be initialized every tailcall is called, which may result in
infinite tailcalls.

Fixes: e63985ec ("bpf, riscv64/cfi: Support kCFI + BPF on riscv64")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20241008124544.171161-1-pulehui@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Fix `name_len` field assertions in `bpf_link_info.perf_event` for
kprobe/uprobe/tracepoint to validate correct name size instead of 0.

Fixes: 23cf7aa5 ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20241008164312.46269-2-wudevelops@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Previously when retrieving `bpf_link_info.perf_event` for
kprobe/uprobe/tracepoint, the `name_len` field was not populated by the
kernel, leaving it to reflect the value initially set by the user. This
behavior was inconsistent with how other input/output string buffer
fields function (e.g. `raw_tracepoint.tp_name_len`).

This patch fills `name_len` with the actual size of the string name.

Fixes: 1b715e1b ("bpf: Support ->fill_link_info for perf_event")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20241008164312.46269-1-wudevelops@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The kzmalloc call in bpf_check can fail when memory is very fragmented,
which in turn can lead to an OOM kill.

Use kvzmalloc to fall back to vmalloc when memory is too fragmented to
allocate an order 3 sized bpf verifier environment.

Admittedly this is not a very common case, and only happens on systems
where memory has already been squeezed close to the limit, but this does
not seem like much of a hot path, and it's a simple enough fix.
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20241008170735.16766766@imladris.surriel.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Hou Tao says:

====================
Check the remaining info_cnt before repeating btf fields

From: Hou Tao <houtao1@huawei.com>

Hi,

The patch set adds the missed check again info_cnt when flattening the
array of nested struct. The problem was spotted when developing dynptr
key support for hash map. Patch #1 adds the missed check and patch #2
adds three success test cases and one failure test case for the problem.

Comments are always welcome.

Change Log:
v2:
 * patch #1: check info_cnt in btf_repeat_fields()
 * patch #2: use a hard-coded number instead of BTF_FIELDS_MAX, because
             BTF_FIELDS_MAX is not always available in vmlinux.h (e.g.,
	     for llvm 17/18)

v1: https://lore.kernel.org/bpf/20240911110557.2759801-1-houtao@huaweicloud.com/T/#t
====================

Link: https://lore.kernel.org/r/20241008071114.3718177-1-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add three success test cases to test the flattening of array of nested
struct. For these three tests, the number of special fields in map is
BTF_FIELDS_MAX, but the array is defined in structs with different
nested level.

Add one failure test case for the flattening as well. In the test case,
the number of special fields in map is BTF_FIELDS_MAX + 1. It will make
btf_parse_fields() in map_create() return -E2BIG, the creation of map
will succeed, but the load of program will fail because the btf_record
is invalid for the map.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241008071114.3718177-3-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When trying to repeat the btf fields for array of nested struct, it
doesn't check the remaining info_cnt. The following splat will be
reported when the value of ret * nelems is greater than BTF_FIELDS_MAX:

  ------------[ cut here ]------------
  UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49
  index 11 is out of range for type 'btf_field_info [11]'
  CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1
  Tainted: [O]=OOT_MODULE
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ...
  Call Trace:
   <TASK>
   dump_stack_lvl+0x57/0x70
   dump_stack+0x10/0x20
   ubsan_epilogue+0x9/0x40
   __ubsan_handle_out_of_bounds+0x6f/0x80
   ? kallsyms_lookup_name+0x48/0xb0
   btf_parse_fields+0x992/0xce0
   map_create+0x591/0x770
   __sys_bpf+0x229/0x2410
   __x64_sys_bpf+0x1f/0x30
   x64_sys_call+0x199/0x9f0
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
  RIP: 0033:0x7fea56f2cc5d
  ......
   </TASK>
  ---[ end trace ]---

Fix it by checking the remaining info_cnt in btf_repeat_fields() before
repeating the btf fields.

Fixes: 64e8ee81 ("bpf: look into the types of the fields of a struct type recursively.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241008071114.3718177-2-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The key_free LSM hook has been removed.
Remove the corresponding BPF hook.

Avoid warnings during the build:
  BTFIDS  vmlinux
WARN: resolve_btfids: unresolved symbol bpf_lsm_key_free

Fixes: 5f8d28f6 ("lsm: infrastructure management of the key security blob")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241005-lsm-key_free-v1-1-42ea801dbd63@weissschuh.net

We need to free specs properly.

Fixes: 3d2786d6 ("bpf: correctly handle malformed BPF_CORE_TYPE_ID_LOCAL relos")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20241007160958.607434-1-jolsa@kernel.org

Florian Kauer says:

====================
rxq contains a pointer to the device from where
the redirect happened. Currently, the BPF program
that was executed after a redirect via BPF_MAP_TYPE_DEVMAP*
does not have it set.

Add bugfix and related selftest.

---
Changes in v4:
- return -> goto out_close, thanks Toke
- Link to v3: https://lore.kernel.org/r/20240909-devel-koalo-fix-ingress-ifindex-v3-0-66218191ecca@linutronix.de

Changes in v3:
- initialize skel to NULL, thanks Stanislav
- Link to v2: https://lore.kernel.org/r/20240906-devel-koalo-fix-ingress-ifindex-v2-0-4caa12c644b4@linutronix.de

Changes in v2:
- changed fixes tag
- added selftest
- Link to v1: https://lore.kernel.org/r/20240905-devel-koalo-fix-ingress-ifindex-v1-1-d12a0d74c29c@linutronix.de
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

The current xdp_devmap_attach test attaches a program
that redirects to another program via devmap.

It is, however, never executed, so do that to catch
any bugs that might occur during execution.

Also, execute the same for a veth pair so that we
also cover the non-generic path.

Warning: Running this without the bugfix in this series
will likely crash your system.
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-2-5c643ae10258@linutronix.deSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

rxq contains a pointer to the device from where
the redirect happened. Currently, the BPF program
that was executed after a redirect via BPF_MAP_TYPE_DEVMAP*
does not have it set.

This is particularly bad since accessing ingress_ifindex, e.g.

SEC("xdp")
int prog(struct xdp_md *pkt)
{
        return bpf_redirect_map(&dev_redirect_map, 0, 0);
}

SEC("xdp/devmap")
int prog_after_redirect(struct xdp_md *pkt)
{
        bpf_printk("ifindex %i", pkt->ingress_ifindex);
        return XDP_PASS;
}

depends on access to rxq, so a NULL pointer gets dereferenced:

<1>[  574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000
<1>[  574.475188] #PF: supervisor read access in kernel mode
<1>[  574.475194] #PF: error_code(0x0000) - not-present page
<6>[  574.475199] PGD 0 P4D 0
<4>[  574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[  574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g78080120 #23
<4>[  574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023
<4>[  574.475231] Workqueue: mld mld_ifc_work
<4>[  574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[  574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b
<4>[  574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206
<4>[  574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000
<4>[  574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0
<4>[  574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001
<4>[  574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000
<4>[  574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000
<4>[  574.475289] FS:  0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000
<4>[  574.475294] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0
<4>[  574.475303] PKRU: 55555554
<4>[  574.475306] Call Trace:
<4>[  574.475313]  <IRQ>
<4>[  574.475318]  ? __die+0x23/0x70
<4>[  574.475329]  ? page_fault_oops+0x180/0x4c0
<4>[  574.475339]  ? skb_pp_cow_data+0x34c/0x490
<4>[  574.475346]  ? kmem_cache_free+0x257/0x280
<4>[  574.475357]  ? exc_page_fault+0x67/0x150
<4>[  574.475368]  ? asm_exc_page_fault+0x26/0x30
<4>[  574.475381]  ? bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[  574.475386]  bq_xmit_all+0x158/0x420
<4>[  574.475397]  __dev_flush+0x30/0x90
<4>[  574.475407]  veth_poll+0x216/0x250 [veth]
<4>[  574.475421]  __napi_poll+0x28/0x1c0
<4>[  574.475430]  net_rx_action+0x32d/0x3a0
<4>[  574.475441]  handle_softirqs+0xcb/0x2c0
<4>[  574.475451]  do_softirq+0x40/0x60
<4>[  574.475458]  </IRQ>
<4>[  574.475461]  <TASK>
<4>[  574.475464]  __local_bh_enable_ip+0x66/0x70
<4>[  574.475471]  __dev_queue_xmit+0x268/0xe40
<4>[  574.475480]  ? selinux_ip_postroute+0x213/0x420
<4>[  574.475491]  ? alloc_skb_with_frags+0x4a/0x1d0
<4>[  574.475502]  ip6_finish_output2+0x2be/0x640
<4>[  574.475512]  ? nf_hook_slow+0x42/0xf0
<4>[  574.475521]  ip6_finish_output+0x194/0x300
<4>[  574.475529]  ? __pfx_ip6_finish_output+0x10/0x10
<4>[  574.475538]  mld_sendpack+0x17c/0x240
<4>[  574.475548]  mld_ifc_work+0x192/0x410
<4>[  574.475557]  process_one_work+0x15d/0x380
<4>[  574.475566]  worker_thread+0x29d/0x3a0
<4>[  574.475573]  ? __pfx_worker_thread+0x10/0x10
<4>[  574.475580]  ? __pfx_worker_thread+0x10/0x10
<4>[  574.475587]  kthread+0xcd/0x100
<4>[  574.475597]  ? __pfx_kthread+0x10/0x10
<4>[  574.475606]  ret_from_fork+0x31/0x50
<4>[  574.475615]  ? __pfx_kthread+0x10/0x10
<4>[  574.475623]  ret_from_fork_asm+0x1a/0x30
<4>[  574.475635]  </TASK>
<4>[  574.475637] Modules linked in: veth br_netfilter bridge stp llc iwlmvm x86_pkg_temp_thermal iwlwifi efivarfs nvme nvme_core
<4>[  574.475662] CR2: 0000000000000000
<4>[  574.475668] ---[ end trace 0000000000000000 ]---

Therefore, provide it to the program by setting rxq properly.

Fixes: cb261b59 ("bpf: Run devmap xdp_prog on flush instead of bulk enqueue")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-1-5c643ae10258@linutronix.deSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

There is a delta between kernel UAPI bpf.h and tools UAPI bpf.h,
thus sync them again.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The bpf_redirect_info is shared between the SKB and XDP redirect paths,
and the two paths use the same numeric flag values in the ri->flags
field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that
if skb bpf_redirect_neigh() is used with a non-NULL params argument and,
subsequently, an XDP redirect is performed using the same
bpf_redirect_info struct, the XDP path will get confused and end up
crashing, which syzbot managed to trigger.

With the stack-allocated bpf_redirect_info, the structure is no longer
shared between the SKB and XDP paths, so the crash doesn't happen
anymore. However, different code paths using identically-numbered flag
values in the same struct field still seems like a bit of a mess, so
this patch cleans that up by moving the flag definitions together and
redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap
with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make
sure the overlap is not re-introduced by mistake.

Fixes: e624d4ed ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-by: syzbot+cca39e6e84a367a7e6f6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=cca39e6e84a367a7e6f6
Link: https://lore.kernel.org/bpf/20240920125625.59465-1-toke@redhat.com

This test was added because of a bug in verifier.c:sync_linked_regs(),
upon range propagation it destroyed subreg_def marks for registers.
The test is written in a way to return an upper half of a register
that is affected by range propagation and must have it's subreg_def
preserved. This gives a return value of 0 and leads to undefined
return value if subreg_def mark is not preserved.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240924210844.1758441-2-eddyz87@gmail.com

Range propagation must not affect subreg_def marks, otherwise the
following example is rewritten by verifier incorrectly when
BPF_F_TEST_RND_HI32 flag is set:

  0: call bpf_ktime_get_ns                   call bpf_ktime_get_ns
  1: r0 &= 0x7fffffff       after verifier   r0 &= 0x7fffffff
  2: w1 = w0                rewrites         w1 = w0
  3: if w0 < 10 goto +0     -------------->  r11 = 0x2f5674a6     (r)
  4: r1 >>= 32                               r11 <<= 32           (r)
  5: r0 = r1                                 r1 |= r11            (r)
  6: exit;                                   if w0 < 0xa goto pc+0
                                             r1 >>= 32
                                             r0 = r1
                                             exit

(or zero extension of w1 at (2) is missing for architectures that
 require zero extension for upper register half).

The following happens w/o this patch:
- r0 is marked as not a subreg at (0);
- w1 is marked as subreg at (2);
- w1 subreg_def is overridden at (3) by copy_register_state();
- w1 is read at (5) but mark_insn_zext() does not mark (2)
  for zero extension, because w1 subreg_def is not set;
- because of BPF_F_TEST_RND_HI32 flag verifier inserts random
  value for hi32 bits of (2) (marked (r));
- this random value is read at (5).

Fixes: 75748837 ("bpf: Propagate scalar ranges through register assignments.")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/bpf/7e2aa30a62d740db182c170fdd8f81c596df280d.camel@gmail.com
Link: https://lore.kernel.org/bpf/20240924210844.1758441-1-eddyz87@gmail.com

The function __bpf_ringbuf_reserve is invoked from a tracepoint, which
disables preemption. Using spinlock_t in this context can lead to a
"sleep in atomic" warning in the RT variant. This issue is illustrated
in the example below:

BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
INFO: lockdep is turned off.
Preemption disabled at:
[<ffffd33a5c88ea44>] migrate_enable+0xc0/0x39c
CPU: 7 PID: 556208 Comm: test_progs Tainted: G
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
 dump_backtrace+0xac/0x130
 show_stack+0x1c/0x30
 dump_stack_lvl+0xac/0xe8
 dump_stack+0x18/0x30
 __might_resched+0x3bc/0x4fc
 rt_spin_lock+0x8c/0x1a4
 __bpf_ringbuf_reserve+0xc4/0x254
 bpf_ringbuf_reserve_dynptr+0x5c/0xdc
 bpf_prog_ac3d15160d62622a_test_read_write+0x104/0x238
 trace_call_bpf+0x238/0x774
 perf_call_bpf_enter.isra.0+0x104/0x194
 perf_syscall_enter+0x2f8/0x510
 trace_sys_enter+0x39c/0x564
 syscall_trace_enter+0x220/0x3c0
 do_el0_svc+0x138/0x1dc
 el0_svc+0x54/0x130
 el0t_64_sync_handler+0x134/0x150
 el0t_64_sync+0x17c/0x180

Switch the spinlock to raw_spinlock_t to avoid this error.

Fixes: 457f4436 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Brian Grech <bgrech@redhat.com>
Signed-off-by: Wander Lairson Costa <wander.lairson@gmail.com>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240920190700.617253-1-wander@redhat.com

Pull NFS client updates from Anna Schumaker:
 "New Features:
   - Add a 'noalignwrite' mount option for lock-less 'lost writes' prevention
   - Add support for the LOCALIO protocol extention

  Bugfixes:
   - Fix memory leak in error path of nfs4_do_reclaim()
   - Simplify and guarantee lock owner uniqueness
   - Fix -Wformat-truncation warning
   - Fix folio refcounts by using folio_attach_private()
   - Fix failing the mount system call when the server is down
   - Fix detection of "Proxying of Times" server support

  Cleanups:
   - Annotate struct nfs_cache_array with __counted_by()
   - Remove unnecessary NULL checks before kfree()
   - Convert RPC_TASK_* constants to an enum
   - Remove obsolete or misleading comments and declerations"

* tag 'nfs-for-6.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (41 commits)
  nfs: Fix `make htmldocs` warnings in the localio documentation
  nfs: add "NFS Client and Server Interlock" section to localio.rst
  nfs: add FAQ section to Documentation/filesystems/nfs/localio.rst
  nfs: add Documentation/filesystems/nfs/localio.rst
  nfs: implement client support for NFS_LOCALIO_PROGRAM
  nfs/localio: use dedicated workqueues for filesystem read and write
  pnfs/flexfiles: enable localio support
  nfs: enable localio for non-pNFS IO
  nfs: add LOCALIO support
  nfs: pass struct nfsd_file to nfs_init_pgio and nfs_init_commit
  nfsd: implement server support for NFS_LOCALIO_PROGRAM
  nfsd: add LOCALIO support
  nfs_common: prepare for the NFS client to use nfsd_file for LOCALIO
  nfs_common: add NFS LOCALIO auxiliary protocol enablement
  SUNRPC: replace program list with program array
  SUNRPC: add svcauth_map_clnt_to_svc_cred_local
  SUNRPC: remove call_allocate() BUG_ONs
  nfsd: add nfsd_serv_try_get and nfsd_serv_put
  nfsd: add nfsd_file_acquire_local()
  nfsd: factor out __fh_verify to allow NULL rqstp to be passed
  ...

Pull fuse updates from Miklos Szeredi:

 - Add support for idmapped fuse mounts (Alexander Mikhalitsyn)

 - Add optimization when checking for writeback (yangyun)

 - Add tracepoints (Josef Bacik)

 - Clean up writeback code (Joanne Koong)

 - Clean up request queuing (me)

 - Misc fixes

* tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (32 commits)
  fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
  fuse: clear FR_PENDING if abort is detected when sending request
  fs/fuse: convert to use invalid_mnt_idmap
  fs/mnt_idmapping: introduce an invalid_mnt_idmap
  fs/fuse: introduce and use fuse_simple_idmap_request() helper
  fs/fuse: fix null-ptr-deref when checking SB_I_NOIDMAP flag
  fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN
  virtio_fs: allow idmapped mounts
  fuse: allow idmapped mounts
  fuse: warn if fuse_access is called when idmapped mounts are allowed
  fuse: handle idmappings properly in ->write_iter()
  fuse: support idmapped ->rename op
  fuse: support idmapped ->set_acl
  fuse: drop idmap argument from __fuse_get_acl
  fuse: support idmapped ->setattr op
  fuse: support idmapped ->permission inode op
  fuse: support idmapped getattr inode op
  fuse: support idmap for mkdir/mknod/symlink/create/tmpfile
  fuse: support idmapped FUSE_EXT_GROUPS
  fuse: add an idmap argument to fuse_simple_request
  ...

Pull exfat updates from Namjae Jeon:

 - Clean-up unnecessary codes as ->valid_size is supported

 - buffered-IO fallback is no longer needed when using direct-IO

 - Move ->valid_size extension from mmap to ->page_mkwrite. This
   improves the overhead caused by unnecessary zero-out during mmap.

 - Fix memleaks from exfat_load_bitmap() and exfat_create_upcase_table()

 - Add sops->shutdown and ioctl

 - Add Yuezhang Mo as a reviwer

* tag 'exfat-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  MAINTAINERS: exfat: add myself as reviewer
  exfat: resolve memory leak from exfat_create_upcase_table()
  exfat: move extend valid_size into ->page_mkwrite()
  exfat: fix memory leak in exfat_load_bitmap()
  exfat: Implement sops->shutdown and ioctl
  exfat: do not fallback to buffered write
  exfat: drop ->i_size_ondisk

Pull f2fs updates from Jaegeuk Kim:
 "The main changes include converting major IO paths to use folio, and
  adding various knobs to control GC more flexibly for Zoned devices.

  In addition, there are several patches to address corner cases of
  atomic file operations and better support for file pinning on zoned
  device.

  Enhancement:
   - add knobs to tune foreground/background GCs for Zoned devices
   - convert IO paths to use folio
   - reduce expensive checkpoint trigger frequency
   - allow F2FS_IPU_NOCACHE for pinned file
   - forcibly migrate to secure space for zoned device file pinning
   - get rid of buffer_head use
   - add write priority option based on zone UFS
   - get rid of online repair on corrupted directory

  Bug fixes:
   - fix to don't panic system for no free segment fault injection
   - fix to don't set SB_RDONLY in f2fs_handle_critical_error()
   - avoid unused block when dio write in LFS mode
   - compress: don't redirty sparse cluster during {,de}compress
   - check discard support for conventional zones
   - atomic: prevent atomic file from being dirtied before commit
   - atomic: fix to check atomic_file in f2fs ioctl interfaces
   - atomic: fix to forbid dio in atomic_file
   - atomic: fix to truncate pagecache before on-disk metadata truncation
   - atomic: create COW inode from parent dentry
   - atomic: fix to avoid racing w/ GC
   - atomic: require FMODE_WRITE for atomic write ioctls
   - fix to wait page writeback before setting gcing flag
   - fix to avoid racing in between read and OPU dio write, dio completion
   - fix several potential integer overflows in file offsets and dir_block_index
   - fix to avoid use-after-free in f2fs_stop_gc_thread()

  As usual, there are several code clean-ups and refactorings"

* tag 'f2fs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
  f2fs: allow F2FS_IPU_NOCACHE for pinned file
  f2fs: forcibly migrate to secure space for zoned device file pinning
  f2fs: remove unused parameters
  f2fs: fix to don't panic system for no free segment fault injection
  f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error()
  f2fs: add valid block ratio not to do excessive GC for one time GC
  f2fs: create gc_no_zoned_gc_percent and gc_boost_zoned_gc_percent
  f2fs: do FG_GC when GC boosting is required for zoned devices
  f2fs: increase BG GC migration window granularity when boosted for zoned devices
  f2fs: add reserved_segments sysfs node
  f2fs: introduce migration_window_granularity
  f2fs: make BG GC more aggressive for zoned devices
  f2fs: avoid unused block when dio write in LFS mode
  f2fs: fix to check atomic_file in f2fs ioctl interfaces
  f2fs: get rid of online repaire on corrupted directory
  f2fs: prevent atomic file from being dirtied before commit
  f2fs: get rid of page->index
  f2fs: convert read_node_page() to use folio
  f2fs: convert __write_node_page() to use folio
  f2fs: convert f2fs_write_data_page() to use folio
  ...

Pull bpf 'struct fd' updates from Alexei Starovoitov:
 "This includes struct_fd BPF changes from Al and Andrii"

* tag 'bpf-next-6.12-struct-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
  bpf: convert bpf_token_create() to CLASS(fd, ...)
  security,bpf: constify struct path in bpf_token_create() LSM hook
  bpf: more trivial fdget() conversions
  bpf: trivial conversions for fdget()
  bpf: switch maps to CLASS(fd, ...)
  bpf: factor out fetching bpf_map from FD and adding it to used_maps list
  bpf: switch fdget_raw() uses to CLASS(fd_raw, ...)
  bpf: convert __bpf_prog_get() to CLASS(fd, ...)

Pull Kbuild updates from Masahiro Yamada:

 - Support cross-compiling linux-headers Debian package and kernel-devel
   RPM package

 - Add support for the linux-debug Pacman package

 - Improve module rebuilding speed by factoring out the common code to
   scripts/module-common.c

 - Separate device tree build rules into scripts/Makefile.dtbs

 - Add a new script to generate modules.builtin.ranges, which is useful
   for tracing tools to find symbols in built-in modules

 - Refactor Kconfig and misc tools

 - Update Kbuild and Kconfig documentation

* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
  kbuild: doc: replace "gcc" in external module description
  kbuild: doc: describe the -C option precisely for external module builds
  kbuild: doc: remove the description about shipped files
  kbuild: doc: drop section numbering, use references in modules.rst
  kbuild: doc: throw out the local table of contents in modules.rst
  kbuild: doc: remove outdated description of the limitation on -I usage
  kbuild: doc: remove description about grepping CONFIG options
  kbuild: doc: update the description about Kbuild/Makefile split
  kbuild: remove unnecessary export of RUST_LIB_SRC
  kbuild: remove append operation on cmd_ld_ko_o
  kconfig: cache expression values
  kconfig: use hash table to reuse expressions
  kconfig: refactor expr_eliminate_dups()
  kconfig: add comments to expression transformations
  kconfig: change some expr_*() functions to bool
  scripts: move hash function from scripts/kconfig/ to scripts/include/
  kallsyms: change overflow variable to bool type
  kallsyms: squash output_address()
  kbuild: add install target for modules.builtin.ranges
  scripts: add verifier script for builtin module range data
  ...

Merge tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux

Pull cpupower updates from Shuah Khan
 "The 'raw_pylibcpupower.i' file was being removed by "make mrproper".

  That was because '*.i', '.s' and '*.o' files are generated during
  kernel compile and removed when the repo is cleaned by mrproper.

  Rename it to use .swg extension instead to avoid the problem.

  A second patch removes references to it from .gitignore"

* tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
  pm: cpupower: Clean up bindings gitignore
  pm: cpupower: rename raw_pylibcpupower.i

Pull i3c updates from Alexandre Belloni:
 "This adds support for the I3C HCI controller of the AMD SoC which as
  expected requires quirks. Also fixes for the other drivers, including
  rate selection fixes for svc.

  Core:
   - allow adjusting first broadcast address speed

  Drivers:
   - cdns: few fixes
   - mipi-i3c-hci: Add AMD SoC I3C controller support and quirks, fix
     get_i3c_mode
   - svc: adjust rates, fix race condition"

* tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
  i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
  i3c: master: svc: adjust SDR according to i3c spec
  i3c: master: svc: use slow speed for first broadcast address
  i3c: master: support to adjust first broadcast address speed
  i3c/master: cmd_v1: Fix the rule for getting i3c mode
  i3c: master: cdns: fix module autoloading
  i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
  i3c: mipi-i3c-hci: Add a quirk to set timing parameters
  i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
  i3c: mipi-i3c-hci: Add a quirk to set PIO mode
  i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
  i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List

The TI_K3_M4_REMOTEPROC Kconfig entry selects OMAP2PLUS_MBOX, but that
driver in turn depends on other things, which the k4-m4 driver didn't.

This causes a Kconfig time warning:

  WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
    Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
    Selected by [m]:
    - TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])

because you can't select something that is unavailable.

Make the dependencies for TI_K3_M4_REMOTEPROC match those of the
OMAP2PLUS_MBOX driver that it needs.

Fixes: ebcf9008 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull input updates from Dmitry Torokhov:

 - support for PixArt PS/2 touchpad

 - updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers

 - support for GPIO-only mode for ADP55888 controller

 - support for touch keys in Zinitix driver

 - support for querying density of Synaptics sensors

 - sysfs interface for Goodex "Berlin" devices to read and write touch
   IC registers

 - more quirks to i8042 to handle various Tuxedo laptops

 - a number of drivers have been converted to using "guard" notation
   when acquiring various locks, as well as using other cleanup
   functions to simplify releasing of resources (with more drivers to
   follow)

 - evdev will limit amount of data that can be written into an evdev
   instance at a given time to 4096 bytes (170 input events) to avoid
   holding evdev->mutex for too long and starving other users

 - Spitz has been converted to use software nodes/properties to describe
   its matrix keypad and GPIO-connected LEDs

 - msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
   removed since noone in mainline have been using them

 - other assorted cleanups and fixes

* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
  ARM: spitz: fix compile error when matrix keypad driver is enabled
  Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
  Input: adp5588-keys - fix check on return code
  Input: Convert comma to semicolon
  Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
  Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
  Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
  Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
  Input: ims-pcu - fix calling interruptible mutex
  Input: zforce_ts - switch to using asynchronous probing
  Input: zforce_ts - remove assert/deassert wrappers
  Input: zforce_ts - do not hardcode interrupt level
  Input: zforce_ts - switch to using devm_regulator_get_enable()
  Input: zforce_ts - stop treating VDD regulator as optional
  Input: zforce_ts - make zforce_idtable constant
  Input: zforce_ts - use dev_err_probe() where appropriate
  Input: zforce_ts - do not ignore errors when acquiring regulator
  Input: zforce_ts - make parsing of contacts less confusing
  Input: zforce_ts - switch to using get_unaligned_le16
  Input: zforce_ts - use guard notation when acquiring mutexes
  ...

Pull hwspinlock update from Bjorn Andersson:
 "This converts the Spreadtrum hardware spinlock DeviceTree binding to
  YAML, to allow validation of related DeviceTree source"

* tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  dt-bindings: hwlock: sprd-hwspinlock: convert to YAML