- 01 Dec, 2016 12 commits
-
-
Trond Myklebust authored
We must put the task to sleep while holding the inode->i_lock in order to ensure atomicity with the test for NFS_LAYOUT_RETURN. Fixes: 500d701f ("NFS41: make close wait for layoutreturn") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
If there is an I/O error, we should not call LAYOUTGET until the LAYOUTRETURN that reports the error is complete. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v4.8+
-
Trond Myklebust authored
If the server sends us a completely new stateid, and the client thinks it already holds a layout, then force a retry of the LAYOUTGET after invalidating the existing layout in order to avoid corruption due to races. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
We must ensure that we don't schedule a layoutreturn if the layout stateid has been marked as invalid. Fixes: 2a59a041 ("pNFS: Fix pnfs_set_layout_stateid() to clear...") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v4.8+
-
Trond Myklebust authored
If we no longer hold any layout segments, we're normally expected to consider the layout stateid to be invalid. However we cannot assume this if we're about to, or in the process of sending a layoutreturn. Fixes: 334a8f37 ("pNFS: Don't forget the layout stateid if...") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v4.8+
-
Trond Myklebust authored
We must not call nfs_pageio_init_read() on a new nfs_pageio_descriptor while holding a reference to a layout segment, as that can deadlock pnfs_update_layout(). Fixes: d67ae825 ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v4.0+
-
Fred Isaman authored
When initializing a freshly created slot for the calllback channel, the seq_nr needs to be 0, not 1. Otherwise validate_seqid and nfs4_slot_wait_on_seqid get confused and believe that the mpty slot corresponds to a previously sent reply. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
The NFS_INO_REVAL_FORCED flag needs to be set if we just got a delegation, and we see that there might still be some ambiguity as to whether or not our attribute or data cache are valid. In practice, this means that a call to nfs_check_inode_attributes() will have noticed a discrepancy between cached attributes and measured ones, so let's move the setting of NFS_INO_REVAL_FORCED to there. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
If holding a delegation, we do not need to ask the server to return close-to-open cache consistency attributes as part of the CLOSE compound. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
If we're not closing the file completely, there is no need to request close-to-open attributes. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
We don't need to ask for the change attribute when returning a delegation or recovering from a server reboot, and it could actually cause us to obtain an incorrect value if we're using a pNFS flavour that requires LAYOUTCOMMIT. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
If we're reclaiming state after a reboot, or as part of returning a delegation, we don't need to check access modes again. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
- 27 Nov, 2016 5 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/intel-iommuLinus Torvalds authored
Pull IOMMU fixes from David Woodhouse: "Two minor fixes. The first fixes the assignment of SR-IOV virtual functions to the correct IOMMU unit, and the second fixes the excessively large (and physically contiguous) PASID tables used with SVM" * git://git.infradead.org/intel-iommu: iommu/vt-d: Fix PASID table allocation iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.9: - Fix unreadable output in __do_page_fault due to the KERN_CONT patchset - Correctly handle MIPS R6 fixes to the c0_wired register" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mm: Fix output of __do_page_fault MIPS: Mask out limit field when calculating wired entry count
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs splice fix from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix default_file_splice_read()
-
Al Viro authored
Botched calculation of number of pages. As the result, we were dropping pieces when doing splice to pipe from e.g. 9p. Reported-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 26 Nov, 2016 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Here is a revert and two bugfixes for the I2C designware driver. Please note that we are still hunting down a regression for the i2c-octeon driver. While there is a fix pending, we have unclear feedback from the testers currently. An rc8 would be quite helpful for this case" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: designware: do not disable adapter after transfer" i2c: designware: fix rx fifo depth tracking i2c: designware: report short transfers
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "This resolves the ksyms issues by reverting the commit which introduced the breakage" There was what I consider to be a better fix, but it's late in the rc game, so I'll take the revert. * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: Revert "arm: move exports to definitions"
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix leak in fsl/fman driver, from Dan Carpenter. 2) Call flow dissector initcall earlier than any networking driver can register and start to use it, from Eric Dumazet. 3) Some dup header fixes from Geliang Tang. 4) TIPC link monitoring compat fix from Jon Paul Maloy. 5) Link changes require EEE re-negotiation in bcm_sf2 driver, from Florian Fainelli. 6) Fix bogus handle ID passed into tfilter_notify_chain(), from Roman Mashak. 7) Fix dump size calculation in rtnl_calcit(), from Zhang Shengju. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) tipc: resolve connection flow control compatibility problem mvpp2: use correct size for memset net/mlx5: drop duplicate header delay.h net: ieee802154: drop duplicate header delay.h ibmvnic: drop duplicate header seq_file.h fsl/fman: fix a leak in tgec_free() net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS tipc: improve sanity check for received domain records tipc: fix compatibility bug in link monitoring net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented dwc_eth_qos: drop duplicate headers net sched filters: fix filter handle ID in tfilter_notify_chain() net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change bnxt: do not busy-poll when link is down udplite: call proper backlog handlers ipv6: bump genid when the IFA_F_TENTATIVE flag is clear net/mlx4_en: Free netdev resources under state lock net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit" rtnetlink: fix the wrong minimal dump size getting from rtnl_calcit() bnxt_en: Fix a VXLAN vs GENEVE issue ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: - Fix a crash that occurs at driver initialization if the memory region is already busy (request_mem_region() fails). - Fix a vma validation check that mistakenly allows a private device- dax mapping to be established. Device-dax explicitly forbids private mappings so it can guarantee a given fault granularity and backing memory type. Both of these fixes have soaked in -next and are tagged for -stable. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fail all private mapping attempts device-dax: check devm_nsio_enable() return value
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "Four fixes for bugs found by syzkaller on x86, all for stable" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: check for pic and ioapic presence before use KVM: x86: fix out-of-bounds accesses of rtc_eoi map KVM: x86: drop error recovery in em_jmp_far and em_ret_far KVM: x86: fix out-of-bounds access in lapic
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fixes marked for stable: - Set missing wakeup bit in LPCR on POWER9 - Fix the early OPAL console wrappers - Fixup kernel read only mapping Fixes for code merged this cycle: - Fix missing CRCs, add more asm-prototypes.h declarations" * tag 'powerpc-4.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fixup kernel read only mapping powerpc/boot: Fix the early OPAL console wrappers powerpc: Fix missing CRCs, add more asm-prototypes.h declarations powerpc: Set missing wakeup bit in LPCR on POWER9
-
Jon Paul Maloy authored
In commit 10724cc7 ("tipc: redesign connection-level flow control") we replaced the previous message based flow control with one based on 1k blocks. In order to ensure backwards compatibility the mechanism falls back to using message as base unit when it senses that the peer doesn't support the new algorithm. The default flow control window, i.e., how many units can be sent before the sender blocks and waits for an acknowledge (aka advertisement) is 512. This was tested against the previous version, which uses an acknowledge frequency of on ack per 256 received message, and found to work fine. However, we missed the fact that versions older than Linux 3.15 use an acknowledge frequency of 512, which is exactly the limit where a 4.6+ sender will stop and wait for acknowledge. This would also work fine if it weren't for the fact that if the first sent message on a 4.6+ server side is an empty SYNACK, this one is also is counted as a sent message, while it is not counted as a received message on a legacy 3.15-receiver. This leads to the sender always being one step ahead of the receiver, a scenario causing the sender to block after 512 sent messages, while the receiver only has registered 511 read messages. Hence, the legacy receiver is not trigged to send an acknowledge, with a permanently blocked sender as result. We solve this deadlock by simply allowing the sender to send one more message before it blocks, i.e., by a making minimal change to the condition used for determining connection congestion. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
gcc-7 detects a short memset in mvpp2, introduced in the original merge of the driver: drivers/net/ethernet/marvell/mvpp2.c: In function 'mvpp2_cls_init': drivers/net/ethernet/marvell/mvpp2.c:3296:2: error: 'memset' used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size] The result seems to be that we write uninitialized data into the flow table registers, although we did not get any warning about that uninitialized data usage. Using sizeof() lets us initialize then entire array instead. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
Drop duplicate header delay.h from mlx5/core/main.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Matan Barak <matanb@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
Drop duplicate header delay.h from adf7242.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
Drop duplicate header seq_file.h from ibmvnic.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We set "tgec->cfg" to NULL before passing it to kfree(). There is no need to set it to NULL at all. Let's just delete it. Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Miroslav Lichvar authored
The ETHTOOL_GLINKSETTINGS command is deprecating the ETHTOOL_GSET command and likewise it shouldn't require the CAP_NET_ADMIN capability. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
In commit 35c55c98 ("tipc: add neighbor monitoring framework") we added a data area to the link monitor STATE messages under the assumption that previous versions did not use any such data area. For versions older than Linux 4.3 this assumption is not correct. In those version, all STATE messages sent out from a node inadvertently contain a 16 byte data area containing a string; -a leftover from previous RESET messages which were using this during the setup phase. This string serves no purpose in STATE messages, and should no be there. Unfortunately, this data area is delivered to the link monitor framework, where a sanity check catches that it is not a correct domain record, and drops it. It also issues a rate limited warning about the event. Since such events occur much more frequently than anticipated, we now choose to remove the warning in order to not fill the kernel log with useless contents. We also make the sanity check stricter, to further reduce the risk that such data is inavertently admitted. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
commit 81729810 ("tipc: fix link priority propagation") introduced a compatibility problem between TIPC versions newer than Linux 4.6 and those older than Linux 4.4. In versions later than 4.4, link STATE messages only contain a non-zero link priority value when the sender wants the receiver to change its priority. This has the effect that the receiver resets itself in order to apply the new priority. This works well, and is consistent with the said commit. However, in versions older than 4.4 a valid link priority is present in all sent link STATE messages, leading to cyclic link establishment and reset on the 4.6+ node. We fix this by adding a test that the received value should not only be valid, but also differ from the current value in order to cause the receiving link endpoint to reset. Reported-by: Amar Nv <amar.nv005@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The mvneta driver advertises it supports IFF_UNICAST_FLT. However, it actually does not. The hardware probably does support it, but there is no code to configure the filter. As a quick and simple fix, remove the flag. This will cause the core to fall back to promiscuous mode. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: b50b72de ("net: mvneta: enable features before registering the driver") Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "On parisc we were still seeing occasional random segmentation faults and memory corruption on SMP machines. Dave Anglin then looked again at the TLB related code and found two issues in the PCI DMA and generic TLB flush functions. Then, in our startup code we had some timing of the cache and TLB functions to calculate a threshold when to use a complete TLB/cache flush or just to flush a specific range. This code produced a race with newly started CPUs and thus lead to occasional kernel crashes (due to stale TLB/cache entries). The patch by Dave fixes this issue by flushing the local caches before starting secondary CPUs and by removing the race. The last problem fixed by this series is that we quite often suffered from hung tasks and self-detected stalls on the CPUs. It was somehow clear that this was related to the (in v4.7) newly introduced cr16 clocksource and the own implementation of sched_clock(). I replaced the open-coded sched_clock() function and switched to the generic sched_clock() implementation which seems to have fixed this isse as well. All patches have been sucessfully tested on a variety of machines, including our debian buildd servers. All patches (beside the small pr_cont fix) are tagged for stable releases" * 'parisc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Also flush data TLB in flush_icache_page_asm parisc: Fix race in pci-dma.c parisc: Switch to generic sched_clock implementation parisc: Fix races in parisc_setup_cache_timing() parisc: Fix printk continuations in system detection
-
- 25 Nov, 2016 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull keys fixes from James Morris: "From David: - Fix mpi_powm()'s handling of a number with a zero exponent [CVE-2016-8650]. Integrate my and Andrey's patches for mpi_powm() and use mpi_resize() instead of RESIZE_IF_NEEDED() - the latter adds a duplicate check into the execution path of a trivial case we don't normally expect to be taken. - Fix double free in X.509 error handling" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: mpi: Fix NULL ptr dereference in mpi_powm() [ver #3] X.509: Fix double free in x509_cert_parse() [ver #3]
-
Linus Torvalds authored
CONFIG_MODVERSIONS has been broken for pretty much the whole 4.9 series, and quite frankly, nobody has cared very deeply. We absolutely know how to fix it, and it's not _complicated_, but it's not exactly pretty either. This oneliner fixes it without the ugliness, and allows for further future cleanups. "We've secretly replaced their regular MODVERSIONS with nothing at all, let's see if they notice" Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "Two ACPI fixes for 4.9-rc7. One of them reverts a recent ACPI commit that attempted to improve reboot/power-off on some systems, but introduced problems elsewhere, and the other one fixes kernel builds with the new WDAT watchdog driver enabled in some configurations. Specifics: - Revert the recent commit that caused the ACPI _PTS method to be executed in the power-off/reboot code path (as per the specification) in an attempt to improve things on some systems (apparently expecting _PTS to be executed in that code path), but broke power-off/reboot on at least one other machine (Rafael Wysocki). - Fix kernel builds with the new WDAT watchdog driver enabled in some configurations by explicitly selecting WATCHDOG_CORE when enabling the WDAT watchdog driver (Mika Westerberg)" * tag 'acpi-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: watchdog: wdat_wdt: Select WATCHDOG_CORE Revert "ACPI: Execute _PTS before system reboot"
-
Rafael J. Wysocki authored
Following the kernel Bugzilla discussion during the Kernel Summit (https://lwn.net/Articles/705245/), add bug tracking system location entry type (B) to MAINTAINERS and populate it for several subsystems known to be using the kernel BZ actively (and add the upstream BZ for ACPICA too). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jarkko Nikula authored
This reverts commit 0317e6c0. Srinivas reported recently touchscreen and touchpad stopped working in Haswell based machine in Linux 4.9-rc series with timeout errors from i2c_designware: [ 16.508013] i2c_designware INT33C3:00: controller timed out [ 16.508302] i2c_hid i2c-MSFT0001:02: failed to change power setting. [ 17.532016] i2c_designware INT33C3:00: controller timed out [ 18.556022] i2c_designware INT33C3:00: controller timed out [ 18.556315] i2c_hid i2c-ATML1000:00: failed to retrieve report from device. I managed to reproduce similar errors on another Haswell based machine where touchscreen initialization fails maybe in every 1/5 - 1/2 boots. Since root cause for these errors is not clear yet and debugging is ongoing it's better to revert this commit as we are near to release. Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Rafael J. Wysocki authored
* acpi-sleep-fixes: Revert "ACPI: Execute _PTS before system reboot" * acpi-wdat-fixes: watchdog: wdat_wdt: Select WATCHDOG_CORE
-