- 11 Apr, 2024 9 commits
-
-
Carolina Jubran authored
Changing the channels number after configuring the receive flow hash indirection table may affect the RSS table size. The previous configuration may no longer be compatible with the new receive flow hash indirection table. Block changing the channels number when RXFH is configured and changing the channels number requires resizing the RSS table size. Fixes: 74a8dada ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by:
Carolina Jubran <cjubran@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Cosmin Ratiu authored
struct mlx5_pkt_reformat contains a naked union of a u32 id and a dr_action pointer which is used when the action is SW-managed (when pkt_reformat.owner is set to MLX5_FLOW_RESOURCE_OWNER_SW). Using id directly in that case is incorrect, as it maps to the least significant 32 bits of the 64-bit pointer in mlx5_fs_dr_action and not to the pkt reformat id allocated in firmware. For the purpose of comparing whether two rules are identical, interpreting the least significant 32 bits of the mlx5_fs_dr_action pointer as an id mostly works... until it breaks horribly and produces the outcome described in [1]. This patch fixes mlx5_flow_dests_cmp to correctly compare ids using mlx5_fs_dr_action_get_pkt_reformat_id for the SW-managed rules. Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Fixes: 6a48faee ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by:
Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Reviewed-by:
-
Cosmin Ratiu authored
Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle. Fixes: 74491de9 ("net/mlx5: Add multi dest support") Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Signed-off-by:
-
Michael Liang authored
The mlx5 comp irq name scheme is changed a little bit between commit 3663ad34 ("net/mlx5: Shift control IRQ to the last index") and commit 3354822c ("net/mlx5: Use dynamic msix vectors allocation"). The index in the comp irq name used to start from 0 but now it starts from 1. There is nothing critical here, but it's harmless to change back to the old behavior, a.k.a starting from 0. Fixes: 3354822c ("net/mlx5: Use dynamic msix vectors allocation") Reviewed-by:
Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by:
Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by:
Michael Liang <mliang@purestorage.com> Reviewed-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
-
Shay Drory authored
In case device is having a non fatal FW error during probe, the driver will report the error to user via devlink. This will trigger a WARN_ON, since mlx5 is calling devlink_register() last. In order to avoid the WARN_ON[1], change mlx5 to invoke devl_register() first under devlink lock. [1] WARNING: CPU: 5 PID: 227 at net/devlink/health.c:483 devlink_recover_notify.constprop.0+0xb8/0xc0 CPU: 5 PID: 227 Comm: kworker/u16:3 Not tainted 6.4.0-rc5_for_upstream_min_debug_2023_06_12_12_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_reporter_err_work [mlx5_core] RIP: 0010:devlink_recover_notify.constprop.0+0xb8/0xc0 Call Trace: <TASK> ? __warn+0x79/0x120 ? devlink_recover_notify.constprop.0+0xb8/0xc0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_recover_notify.constprop.0+0xb8/0xc0 devlink_health_report+0x4a/0x1c0 mlx5_fw_reporter_err_work+0xa4/0xd0 [mlx5_core] process_one_work+0x1bb/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x4d/0x3c0 ? process_one_work+0x3c0/0x3c0 kthread+0xc6/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: cf530217 ("devlink: Notify users when objects are accessible") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Shay Drory authored
Next patch will move devlink register to be first. Therefore, whenever mlx5 will register a param, the user will be notified. In order to notify the user, devlink is using the get() callback of the param. Hence, resources that are being used by the get() callback must be set before the devlink param is registered. Therefore, store eswitch pointer inside mdev before registering the param. Signed-off-by:
-
Eric Dumazet authored
In my recent commit, I missed that do_replace() handlers use copy_from_sockptr() (which I fixed), followed by unsafe copy_from_sockptr_offset() calls. In all functions, we can perform the @optlen validation before even calling xt_alloc_table_info() with the following check: if ((u64)optlen < (u64)tmp.size + sizeof(tmp)) return -EINVAL; Fixes: 0c83842d ("netfilter: validate user input for expected length") Reported-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/r/20240409120741.3538135-1-edumazet@google.comSigned-off-by:
-
Heiner Kallweit authored
Add missing dependency on CONFIG_R8169_LEDS. As-is a link error occurs if config option CONFIG_R8169_LEDS isn't enabled. Fixes: 19fa4f2a ("r8169: fix LED-related deadlock on module removal") Reported-by:
Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Tested-By:
-
Arınç ÜNAL authored
The commit 40b5d2f1 ("net: dsa: mt7530: Add support for EEE features") brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board (bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to SkyLake Huang (黃啟澤) from MediaTek for providing information on the internal EEE switch bit. There are existing boards that were not designed to pull the pin low. Because of that, the EEE status currently depends on the board design. The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually used to control an LED. Once the bit is unset, the pin will be low. That will make the active low LED turn on. The pin is controlled by the switch PHY. It seems that the PHY controls the pin in the way that it inverts the pin state. That means depending on the wiring of the LED connected to LAN2LED0 on the board, the LED may be on without an active link. To not cause this unwanted behaviour whilst enabling EEE on all boards, set the internal EEE switch bit on the CORE_PLL_GROUP4 register. My testing on MT7531 shows a certain amount of traffic loss when EEE is enabled. That said, I haven't come across a board that enables EEE. So enable EEE on the switch MACs but disable EEE advertisement on the switch PHYs. This way, we don't change the behaviour of the majority of the boards that have this switch. The mediatek-ge PHY driver already disables EEE advertisement on the switch PHYs but my testing shows that it is somehow enabled afterwards. Disabling EEE advertisement before the PHY driver initialises keeps it off. With this change, EEE can now be enabled using ethtool. Fixes: 40b5d2f1 ("net: dsa: mt7530: Add support for EEE features") Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
-
- 10 Apr, 2024 7 commits
-
-
Heiner Kallweit authored
Binding devm_led_classdev_register() to the netdev is problematic because on module removal we get a RTNL-related deadlock. Fix this by avoiding the device-managed LED functions. Note: We can safely call led_classdev_unregister() for a LED even if registering it failed, because led_classdev_unregister() detects this and is a no-op in this case. Fixes: 18764b88 ("r8169: add support for LED's on RTL8168/RTL8101") Cc: stable@vger.kernel.org Reported-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Brett Creeley authored
When the driver notices fw_status == 0xff it tries to perform a PCI reset on itself via pci_reset_function() in the context of the driver's health thread. However, pdsc_reset_prepare calls pdsc_stop_health_thread(), which attempts to stop/flush the health thread. This results in a deadlock because the stop/flush will never complete since the driver called pci_reset_function() from the health thread context. Fix by changing the pdsc_check_pci_health_function() to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's work queue. Unloading the driver in the fw_down/dead state uncovered another issue, which can be seen in the following trace: WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440 [...] RIP: 0010:__queue_work+0x358/0x440 [...] Call Trace: <TASK> ? __warn+0x85/0x140 ? __queue_work+0x358/0x440 ? report_bug+0xfc/0x1e0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x358/0x440 queue_work_on+0x28/0x30 pdsc_devcmd_locked+0x96/0xe0 [pds_core] pdsc_devcmd_reset+0x71/0xb0 [pds_core] pdsc_teardown+0x51/0xe0 [pds_core] pdsc_remove+0x106/0x200 [pds_core] pci_device_remove+0x37/0xc0 device_release_driver_internal+0xae/0x140 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xa0 pdsc_cleanup_module+0x10/0x780 [pds_core] __x64_sys_delete_module+0x142/0x2b0 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fbd9d03a14b [...] Fix this by preventing the devcmd reset if the FW is not running. Fixes: d9407ff1 ("pds_core: Prevent health thread from running during reset/remove") Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Jiri Benc authored
Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it still means hlist_for_each_entry_rcu can return an item that got removed from the list. The memory itself of such item is not freed thanks to RCU but nothing guarantees the actual content of the memory is sane. In particular, the reference count can be zero. This can happen if ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough timing, this can happen: 1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry. 2. Then, the whole ipv6_del_addr is executed for the given entry. The reference count drops to zero and kfree_rcu is scheduled. 3. ipv6_get_ifaddr continues and tries to increments the reference count (in6_ifa_hold). 4. The rcu is unlocked and the entry is freed. 5. The freed entry is returned. Prevent increasing of the reference count in such case. The name in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe. [ 41.506330] refcount_t: addition on 0; use-after-free. [ 41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130 [ 41.507413] Modules linked in: veth bridge stp llc [ 41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be8 #14 [ 41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130 [ 41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff [ 41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282 [ 41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000 [ 41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900 [ 41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff [ 41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000 [ 41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48 [ 41.514086] FS: 00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000 [ 41.514726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0 [ 41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.516799] Call Trace: [ 41.517037] <TASK> [ 41.517249] ? __warn+0x7b/0x120 [ 41.517535] ? refcount_warn_saturate+0xa5/0x130 [ 41.517923] ? report_bug+0x164/0x190 [ 41.518240] ? handle_bug+0x3d/0x70 [ 41.518541] ? exc_invalid_op+0x17/0x70 [ 41.520972] ? asm_exc_invalid_op+0x1a/0x20 [ 41.521325] ? refcount_warn_saturate+0xa5/0x130 [ 41.521708] ipv6_get_ifaddr+0xda/0xe0 [ 41.522035] inet6_rtm_getaddr+0x342/0x3f0 [ 41.522376] ? __pfx_inet6_rtm_getaddr+0x10/0x10 [ 41.522758] rtnetlink_rcv_msg+0x334/0x3d0 [ 41.523102] ? netlink_unicast+0x30f/0x390 [ 41.523445] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 41.523832] netlink_rcv_skb+0x53/0x100 [ 41.524157] netlink_unicast+0x23b/0x390 [ 41.524484] netlink_sendmsg+0x1f2/0x440 [ 41.524826] __sys_sendto+0x1d8/0x1f0 [ 41.525145] __x64_sys_sendto+0x1f/0x30 [ 41.525467] do_syscall_64+0xa5/0x1b0 [ 41.525794] entry_SYSCALL_64_after_hwframe+0x72/0x7a [ 41.526213] RIP: 0033:0x7fbc4cfcea9a [ 41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a [ 41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005 [ 41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c [ 41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b [ 41.531573] </TASK> Fixes: 5c578aed ("IPv6: convert addrconf hash list to RCU") Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Link: https://lore.kernel.org/r/8ab821e36073a4a406c50ec83c9e8dc586c539e4.1712585809.git.jbenc@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: start to replace copy_from_sockptr() We got several syzbot reports about unsafe copy_from_sockptr() calls. After fixing some of them, it appears that we could use a new helper to factorize all the checks in one place. This series targets net tree, we can later start converting many call sites in net-next. ==================== Link: https://lore.kernel.org/r/20240408082845.3957374-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
syzbot reported unsafe calls to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 Read of size 4 at addr ffff88801caa1ec3 by task syz-executor459/5078 CPU: 0 PID: 5078 Comm: syz-executor459 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 do_sock_setsockopt+0x3b1/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfd/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7f7fac07fd89 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff660eb788 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f7fac07fd89 RDX: 0000000000000000 RSI: 0000000000000118 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000020000a80 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240408082845.3957374-4-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
syzbot reports one unsafe call to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417 Read of size 4 at addr ffff0000c6d54083 by task syz-executor406/6167 CPU: 1 PID: 6167 Comm: syz-executor406 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load_n_noabort+0x1c/0x28 mm/kasan/report_generic.c:391 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417 do_sock_setsockopt+0x2a0/0x4e0 net/socket.c:2311 __sys_setsockopt+0x128/0x1a8 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __arm64_sys_setsockopt+0xb8/0xd4 net/socket.c:2340 __invoke_syscall arch/arm64/kernel/syscall.c:34 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Fixes: 1b2b03f8 ("Add mISDN core files") Signed-off-by:
-
Eric Dumazet authored
copy_from_sockptr() helper is unsafe, unless callers did the prior check against user provided optlen. Too many callers get this wrong, lets add a helper to fix them and avoid future copy/paste bugs. Instead of : if (optlen < sizeof(opt)) { err = -EINVAL; break; } if (copy_from_sockptr(&opt, optval, sizeof(opt)) { err = -EFAULT; break; } Use : err = copy_safe_from_sockptr(&opt, sizeof(opt), optval, optlen); if (err) break; Signed-off-by:
-
- 09 Apr, 2024 6 commits
-
-
Arnd Bergmann authored
The log_martians variable is only used in an #ifdef, causing a 'make W=1' warning with gcc: net/ipv4/route.c: In function 'ip_rt_send_redirect': net/ipv4/route.c:880:13: error: variable 'log_martians' set but not used [-Werror=unused-but-set-variable] Change the #ifdef to an equivalent IS_ENABLED() to let the compiler see where the variable is used. Fixes: 30038fc6 ("net: ip_rt_send_redirect() optimization") Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Arnd Bergmann authored
When CONFIG_IPV6_SUBTREES is disabled, the only user is hidden, causing a 'make W=1' warning: net/ipv6/ip6_fib.c: In function 'fib6_add': net/ipv6/ip6_fib.c:1388:32: error: variable 'pn' set but not used [-Werror=unused-but-set-variable] Add another #ifdef around the variable declaration, matching the other uses in this file. Fixes: 66729e18 ("[IPV6] ROUTE: Make sure we have fn->leaf when adding a node on subtree.") Link: https://lore.kernel.org/netdev/20240322131746.904943-1-arnd@kernel.org/Reviewed-by:
-
Geetha sowjanya authored
NIX SQ mode and link backpressure configuration is required for all platforms. But in current driver this code is wrongly placed under specific platform check. This patch fixes the issue by moving the code out of platform check. Fixes: 5d9b976d ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Link: https://lore.kernel.org/r/20240408063643.26288-1-gakula@marvell.comSigned-off-by:
-
Kuniyuki Iwashima authored
syzkaller started to report deadlock of unix_gc_lock after commit 4090fa37 ("af_unix: Replace garbage collection algorithm."), but it just uncovers the bug that has been there since commit 314001f0 ("af_unix: Add OOB support"). The repro basically does the following. from socket import * from array import array c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB) c2.recv(1) # blocked as no normal data in recv queue c2.close() # done async and unblock recv() c1.close() # done async and trigger GC A socket sends its file descriptor to itself as OOB data and tries to receive normal data, but finally recv() fails due to async close(). The problem here is wrong handling of OOB skb in manage_oob(). When recvmsg() is called without MSG_OOB, manage_oob() is called to check if the peeked skb is OOB skb. In such a case, manage_oob() pops it out of the receive queue but does not clear unix_sock(sk)->oob_skb. This is wrong in terms of uAPI. Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB. The 'o' is handled as OOB data. When recv() is called twice without MSG_OOB, the OOB data should be lost. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM, 0) >>> c1.send(b'hello', MSG_OOB) # 'o' is OOB data 5 >>> c1.send(b'world') 5 >>> c2.recv(5) # OOB data is not received b'hell' >>> c2.recv(5) # OOB date is skipped b'world' >>> c2.recv(5, MSG_OOB) # This should return an error b'o' In the same situation, TCP actually returns -EINVAL for the last recv(). Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always set EPOLLPRI even though the data has passed through by previous recv(). To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuing it from recv queue. The reason why the old GC did not trigger the deadlock is because the old GC relied on the receive queue to detect the loop. When it is triggered, the socket with OOB data is marked as GC candidate because file refcount == inflight count (1). However, after traversing all inflight sockets, the socket still has a positive inflight count (1), thus the socket is excluded from candidates. Then, the old GC lose the chance to garbage-collect the socket. With the old GC, the repro continues to create true garbage that will never be freed nor detected by kmemleak as it's linked to the global inflight list. That's why we couldn't even notice the issue. Fixes: 314001f0 ("af_unix: Add OOB support") Reported-by: syzbot+7f7f201cc2668a8fd169@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7f7f201cc2668a8fd169Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
-
Marek Vasut authored
The ks8851_irq() thread may call ks8851_rx_pkts() in case there are any packets in the MAC FIFO, which calls netif_rx(). This netif_rx() implementation is guarded by local_bh_disable() and local_bh_enable(). The local_bh_enable() may call do_softirq() to run softirqs in case any are pending. One of the softirqs is net_rx_action, which ultimately reaches the driver .start_xmit callback. If that happens, the system hangs. The entire call chain is below: ks8851_start_xmit_par from netdev_start_xmit netdev_start_xmit from dev_hard_start_xmit dev_hard_start_xmit from sch_direct_xmit sch_direct_xmit from __dev_queue_xmit __dev_queue_xmit from __neigh_update __neigh_update from neigh_update neigh_update from arp_process.constprop.0 arp_process.constprop.0 from __netif_receive_skb_one_core __netif_receive_skb_one_core from process_backlog process_backlog from __napi_poll.constprop.0 __napi_poll.constprop.0 from net_rx_action net_rx_action from __do_softirq __do_softirq from call_with_stack call_with_stack from do_softirq do_softirq from __local_bh_enable_ip __local_bh_enable_ip from netif_rx netif_rx from ks8851_irq ks8851_irq from irq_thread_fn irq_thread_fn from irq_thread irq_thread from kthread kthread from ret_from_fork The hang happens because ks8851_irq() first locks a spinlock in ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...) and with that spinlock locked, calls netif_rx(). Once the execution reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again which attempts to claim the already locked spinlock again, and the hang happens. Move the do_softirq() call outside of the spinlock protected section of ks8851_irq() by disabling BHs around the entire spinlock protected section of ks8851_irq() handler. Place local_bh_enable() outside of the spinlock protected section, so that it can trigger do_softirq() without the ks8851_par.c ks8851_lock_par() spinlock being held, and safely call ks8851_start_xmit_par() without attempting to lock the already locked spinlock. Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable() now, replace netif_rx() with __netif_rx() which is not duplicating the local_bh_disable()/local_bh_enable() calls. Fixes: 797047f8 ("net: ks8851: Implement Parallel bus operations") Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20240405203204.82062-2-marex@denx.deSigned-off-by:
-
Marek Vasut authored
Both ks8851_rx_skb_par() and ks8851_rx_skb_spi() call netif_rx(skb), inline the netif_rx(skb) call directly into ks8851_common.c and drop the .rx_skb callback and ks8851_rx_skb() wrapper. This removes one indirect call from the driver, no functional change otherwise. Signed-off-by:
-
- 08 Apr, 2024 12 commits
-
-
David S. Miller authored
Minda Chen says: ==================== Add missing mmc statistics in DW GMAC Add miss MMC statistic in DW GMAC base on 6.9-rc1 changed v2: patch2 : remove mmc_rx_control_g due to it is gotten in ethtool_ops::get_eth_ctrl_stats. ==================== Signed-off-by: -
Minda Chen authored
The missing statistics including Rx_Receive_Error_Packets and Tx_OSize_Packets_Good. Signed-off-by:
Minda Chen <minda.chen@starfivetech.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Minda Chen authored
XGMAC MMC has already added LPI statistics. GMAC MMC lack of these statistics. Add register definition and reading the LPI statistics from registers. Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes The first 2 patches fix 2 potential issues in the aux bus initialization and error recovery paths. The 3rd patch fixes a potential PTP TX timestamp issue during error recovery. ==================== Signed-off-by: -
Pavan Chebbi authored
It is possible that during error recovery and firmware reset, there is a pending TX PTP packet waiting for the timestamp. We need to reset this condition so that after recovery, the tx_avail count for PTP is reset back to the initial value. Otherwise, we may not accept any PTP TX timestamps after recovery. Fixes: 118612d5 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods") Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
Since runtime MSIXs vector allocation/free has been removed, the L2 driver needs to repopulate the MSIX entries for the ulp client as the irq table may change during the recovery process. Fixes: 30343221 ("bnxt_en: Remove runtime interrupt vector allocation") Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
If ulp = kzalloc() fails, the allocated edev will leak because it is not properly assigned and the cleanup path will not be able to free it. Fix it by assigning it properly immediately after allocation. Fixes: 30343221 ("bnxt_en: Remove runtime interrupt vector allocation") Reviewed-by:
-
Gerd Bayer authored
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP anymore, even on archs that may be able to fulfill this. Functionality that relied on the receive buffer being a compound page broke at that point: The SMC-D protocol, that utilizes the ism device driver, passes receive buffers to the splice processor in a struct splice_pipe_desc with a single entry list of struct pages. As the buffer is no longer a compound page, the splice processor now rejects requests to handle more than a page worth of data. Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and create a DMA map for it with dma_map_page(). Since only receive buffers on ISM devices use DMA, qualify the mapping as FROM_DEVICE. Since ISM devices are available on arch s390, only and on that arch all DMA is coherent, there is no need to introduce and export some kind of dma_sync_to_cpu() method to be called by the SMC-D protocol layer. Analogously, replace dma_free_coherent by a two step dma_unmap_page, then folio_put to free the receive buffer. [1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/ Fixes: c08004ee ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent") Signed-off-by:
Gerd Bayer <gbayer@linux.ibm.com> Signed-off-by:
-
Eric Dumazet authored
syzbot is able to trigger an uninit-value in geneve_xmit() [1] Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield()) uses skb_protocol(skb, true), pskb_inet_may_pull() is only using skb->protocol. If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol, pskb_inet_may_pull() does nothing at all. If a vlan tag was provided by the caller (af_packet in the syzbot case), the network header might not point to the correct location, and skb linear part could be smaller than expected. Add skb_vlan_inet_prepare() to perform a complete mac validation. Use this in geneve for the moment, I suspect we need to adopt this more broadly. v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest - Only call __vlan_get_protocol() for vlan types. Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/ v2,v3 - Addressed Sabrina comments on v1 and v2 Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/ [1] BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline] BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 geneve_xmit_skb drivers/net/geneve.c:910 [inline] geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87ef #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Fixes: d13f048d ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb") Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Phillip Potter <phil@philpotter.co.uk> Signed-off-by:
-
Uwe Kleine-König authored
When sending a patch to (among others) Li Yang the nxp MTA replied that the address doesn't exist and so the mail couldn't be delivered. The error code was 550, so at least technically that's not a temporal issue. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - void infinite loop trying to resize local TT, by Sven Eckelmann ==================== Signed-off-by: -
Arnd Bergmann authored
When CONFIG_NET is disabled, an extra warning shows up for this unused variable: lib/checksum_kunit.c:218:18: error: 'expected_csum_ipv6_magic' defined but not used [-Werror=unused-const-variable=] Replace the #ifdef with an IS_ENABLED() check that makes the compiler's dead-code-elimination take care of the link failure. Fixes: f24a7010 ("lib: checksum: Fix build with CONFIG_NET=n") Suggested-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by:
Palmer Dabbelt <palmer@rivosinc.com> Acked-by:
-
- 07 Apr, 2024 2 commits
-
-
Hariprasad Kelam authored
Inorder to support shaping and scheduling, Upon class creation Netdev driver allocates trasmit schedulers. The previous patch which added support for Round robin scheduling has a bug due to which driver is not freeing transmit schedulers post class deletion. This patch fixes the same. Fixes: 47a9656f ("octeontx2-pf: htb offload support for Round Robin scheduling") Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
-
Breno Leitao authored
There is a bug when setting the RSS options in virtio_net that can break the whole machine, getting the kernel into an infinite loop. Running the following command in any QEMU virtual machine with virtionet will reproduce this problem: # ethtool -X eth0 hfunc toeplitz This is how the problem happens: 1) ethtool_set_rxfh() calls virtnet_set_rxfh() 2) virtnet_set_rxfh() calls virtnet_commit_rss_command() 3) virtnet_commit_rss_command() populates 4 entries for the rss scatter-gather 4) Since the command above does not have a key, then the last scatter-gatter entry will be zeroed, since rss_key_size == 0. sg_buf_size = vi->rss_key_size; 5) This buffer is passed to qemu, but qemu is not happy with a buffer with zero length, and do the following in virtqueue_map_desc() (QEMU function): if (!sz) { virtio_error(vdev, "virtio: zero sized buffers are not allowed"); 6) virtio_error() (also QEMU function) set the device as broken vdev->broken = true; 7) Qemu bails out, and do not repond this crazy kernel. 8) The kernel is waiting for the response to come back (function virtnet_send_command()) 9) The kernel is waiting doing the following : while (!virtqueue_get_buf(vi->cvq, &tmp) && !virtqueue_is_broken(vi->cvq)) cpu_relax(); 10) None of the following functions above is true, thus, the kernel loops here forever. Keeping in mind that virtqueue_is_broken() does not look at the qemu `vdev->broken`, so, it never realizes that the vitio is broken at QEMU side. Fix it by not sending RSS commands if the feature is not available in the device. Fixes: c7114b12 ("drivers/net/virtio_net: Added basic RSS support.") Cc: stable@vger.kernel.org Cc: qemu-devel@nongnu.org Signed-off-by:Breno Leitao <leitao@debian.org> Reviewed-by:
Heng Qi <hengqi@linux.alibaba.com> Reviewed-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by:
-
- 06 Apr, 2024 3 commits
-
-
Eric Dumazet authored
syzbot reported an illegal copy in xsk_setsockopt() [1] Make sure to validate setsockopt() @optlen parameter. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420 Read of size 4 at addr ffff888028c6cde3 by task syz-executor.0/7549 CPU: 0 PID: 7549 Comm: syz-executor.0 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420 do_sock_setsockopt+0x3af/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7fb40587de69 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb40665a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fb4059abf80 RCX: 00007fb40587de69 RDX: 0000000000000005 RSI: 000000000000011b RDI: 0000000000000006 RBP: 00007fb4058ca47a R08: 0000000000000002 R09: 0000000000000000 R10: 0000000020001980 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fb4059abf80 R15: 00007fff57ee4d08 </TASK> Allocated by task 7549: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:3966 [inline] __kmalloc+0x233/0x4a0 mm/slub.c:3979 kmalloc include/linux/slab.h:632 [inline] __cgroup_bpf_run_filter_setsockopt+0xd2f/0x1040 kernel/bpf/cgroup.c:1869 do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 The buggy address belongs to the object at ffff888028c6cde0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 1 bytes to the right of allocated 2-byte region [ffff888028c6cde0, ffff888028c6cde2) The buggy address belongs to the physical page: page:ffffea0000a31b00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888028c6c9c0 pfn:0x28c6c anon flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 00fff00000000800 ffff888014c41280 0000000000000000 dead000000000001 raw: ffff888028c6c9c0 0000000080800057 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112cc0(GFP_USER|__GFP_NOWARN|__GFP_NORETRY), pid 6648, tgid 6644 (syz-executor.0), ts 133906047828, free_ts 133859922223 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x1ea/0x210 mm/page_alloc.c:1533 prep_new_page mm/page_alloc.c:1540 [inline] get_page_from_freelist+0x33ea/0x3580 mm/page_alloc.c:3311 __alloc_pages+0x256/0x680 mm/page_alloc.c:4569 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page+0x5f/0x160 mm/slub.c:2175 allocate_slab mm/slub.c:2338 [inline] new_slab+0x84/0x2f0 mm/slub.c:2391 ___slab_alloc+0xc73/0x1260 mm/slub.c:3525 __slab_alloc mm/slub.c:3610 [inline] __slab_alloc_node mm/slub.c:3663 [inline] slab_alloc_node mm/slub.c:3835 [inline] __do_kmalloc_node mm/slub.c:3965 [inline] __kmalloc_node+0x2db/0x4e0 mm/slub.c:3973 kmalloc_node include/linux/slab.h:648 [inline] __vmalloc_area_node mm/vmalloc.c:3197 [inline] __vmalloc_node_range+0x5f9/0x14a0 mm/vmalloc.c:3392 __vmalloc_node mm/vmalloc.c:3457 [inline] vzalloc+0x79/0x90 mm/vmalloc.c:3530 bpf_check+0x260/0x19010 kernel/bpf/verifier.c:21162 bpf_prog_load+0x1667/0x20f0 kernel/bpf/syscall.c:2895 __sys_bpf+0x4ee/0x810 kernel/bpf/syscall.c:5631 __do_sys_bpf kernel/bpf/syscall.c:5738 [inline] __se_sys_bpf kernel/bpf/syscall.c:5736 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 page last free pid 6650 tgid 6647 stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1140 [inline] free_unref_page_prepare+0x95d/0xa80 mm/page_alloc.c:2346 free_unref_page_list+0x5a3/0x850 mm/page_alloc.c:2532 release_pages+0x2117/0x2400 mm/swap.c:1042 tlb_batch_pages_flush mm/mmu_gather.c:98 [inline] tlb_flush_mmu_free mm/mmu_gather.c:293 [inline] tlb_flush_mmu+0x34d/0x4e0 mm/mmu_gather.c:300 tlb_finish_mmu+0xd4/0x200 mm/mmu_gather.c:392 exit_mmap+0x4b6/0xd40 mm/mmap.c:3300 __mmput+0x115/0x3c0 kernel/fork.c:1345 exit_mm+0x220/0x310 kernel/exit.c:569 do_exit+0x99e/0x27e0 kernel/exit.c:865 do_group_exit+0x207/0x2c0 kernel/exit.c:1027 get_signal+0x176e/0x1850 kernel/signal.c:2907 arch_do_signal_or_restart+0x96/0x860 arch/x86/kernel/signal.c:310 exit_to_user_mode_loop kernel/entry/common.c:105 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:201 [inline] syscall_exit_to_user_mode+0xc9/0x360 kernel/entry/common.c:212 do_syscall_64+0x10a/0x240 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Memory state around the buggy address: ffff888028c6cc80: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc ffff888028c6cd00: fa fc fc fc fa fc fc fc 00 fc fc fc 06 fc fc fc >ffff888028c6cd80: fa fc fc fc fa fc fc fc fa fc fc fc 02 fc fc fc ^ ffff888028c6ce00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc ffff888028c6ce80: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc Fixes: 423f3832 ("xsk: add umem fill queue support and mmap") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240404202738.3634547-1-edumazet@google.comSigned-off-by:
-
Petr Tesarik authored
Fix bogus lockdep warnings if multiple u64_stats_sync variables are initialized in the same file. With CONFIG_LOCKDEP, seqcount_init() is a macro which declares: static struct lock_class_key __key; Since u64_stats_init() is a function (albeit an inline one), all calls within the same file end up using the same instance, effectively treating them all as a single lock-class. Fixes: 9464ca65 ("net: make u64_stats_init() a function") Closes: https://lore.kernel.org/netdev/ea1567d9-ce66-45e6-8168-ac40a47d1821@roeck-us.net/Signed-off-by:
Petr Tesarik <petr@tesarici.cz> Reviewed-by:
-
Ilya Maximets authored
On startup, ovs-vswitchd probes different datapath features including support for timeout policies. While probing, it tries to execute certain operations with OVS_PACKET_ATTR_PROBE or OVS_FLOW_ATTR_PROBE attributes set. These attributes tell the openvswitch module to not log any errors when they occur as it is expected that some of the probes will fail. For some reason, setting the timeout policy ignores the PROBE attribute and logs a failure anyway. This is causing the following kernel log on each re-start of ovs-vswitchd: kernel: Failed to associated timeout policy `ovs_test_tp' Fix that by using the same logging macro that all other messages are using. The message will still be printed at info level when needed and will be rate limited, but with a net rate limiter instead of generic printk one. The nf_ct_set_timeout() itself will still print some info messages, but at least this change makes logging in openvswitch module more consistent. Fixes: 06bd2bdf ("openvswitch: Add timeout support to ct action") Signed-off-by:
Ilya Maximets <i.maximets@ovn.org> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20240403203803.2137962-1-i.maximets@ovn.orgSigned-off-by:
-
- 04 Apr, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, bluetooth and bpf. Fairly usual collection of driver and core fixes. The large selftest accompanying one of the fixes is also becoming a common occurrence. Current release - regressions: - ipv6: fix infinite recursion in fib6_dump_done() - net/rds: fix possible null-deref in newly added error path Current release - new code bugs: - net: do not consume a full cacheline for system_page_pool - bpf: fix bpf_arena-related file descriptor leaks in the verifier - drv: ice: fix freeing uninitialized pointers, fixing misuse of the newfangled __free() auto-cleanup Previous releases - regressions: - x86/bpf: fixes the BPF JIT with retbleed=stuff - xen-netfront: add missing skb_mark_for_recycle, fix page pool accounting leaks, revealed by recently added explicit warning - tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6 non-wildcard addresses - Bluetooth: - replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with better workarounds to un-break some buggy Qualcomm devices - set conn encrypted before conn establishes, fix re-connecting to some headsets which use slightly unusual sequence of msgs - mptcp: - prevent BPF accessing lowat from a subflow socket - don't account accept() of non-MPC client as fallback to TCP - drv: mana: fix Rx DMA datasize and skb_over_panic - drv: i40e: fix VF MAC filter removal Previous releases - always broken: - gro: various fixes related to UDP tunnels - netns crossing problems, incorrect checksum conversions, and incorrect packet transformations which may lead to panics - bpf: support deferring bpf_link dealloc to after RCU grace period - nf_tables: - release batch on table validation from abort path - release mutex after nft_gc_seq_end from abort path - flush pending destroy work before exit_net release - drv: r8169: skip DASH fw status checks when DASH is disabled" * tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits) netfilter: validate user input for expected length net/sched: act_skbmod: prevent kernel-infoleak net: usb: ax88179_178a: avoid the interface always configured as random address net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45() net: ravb: Always update error counters net: ravb: Always process TX descriptor ring netfilter: nf_tables: discard table flag update with pending basechain deletion netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get() netfilter: nf_tables: reject new basechain after table flag update netfilter: nf_tables: flush pending destroy work before exit_net release netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path netfilter: nf_tables: release batch on table validation from abort path Revert "tg3: Remove residual error handling in tg3_suspend" tg3: Remove residual error handling in tg3_suspend net: mana: Fix Rx DMA datasize and skb_over_panic net/sched: fix lockdep splat in qdisc_tree_reduce_backlog() net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping net: stmmac: fix rx queue priority assignment net: txgbe: fix i2c dev name cannot match clkdev net: fec: Set mac_managed_pm during probe ...
-
