- 28 Jan, 2011 14 commits
-
-
Russell King - ARM Linux authored
This adds a clean method to allow platforms to hook into the reset code if they require to. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Aaro Koskinen authored
Eliminates the following sparse warning: arch/arm/mach-omap1/board-h3.c:207:27: warning: symbol 'nand_platdata' was not declared. Should it be static? Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Aaro Koskinen authored
Eliminates the following sparse warnings: arch/arm/mach-omap1/board-htcherald.c:334:34: warning: symbol 'htcpld_chips' was not declared. Should it be static? arch/arm/mach-omap1/board-htcherald.c:369:34: warning: symbol 'htcpld_pfdata' was not declared. Should it be static? Signed-off-by:
-
Aaro Koskinen authored
Eliminates the following sparse warning: arch/arm/mach-omap1/board-innovator.c:368:13: warning: symbol 'innovator_mmc_init' was not declared. Should it be static? Signed-off-by:
-
Aaro Koskinen authored
Eliminates the following sparse warning: arch/arm/mach-omap1/board-h2.c:205:27: warning: symbol 'h2_nand_platdata' was not declared. Should it be static? Signed-off-by:
-
Aaro Koskinen authored
Eliminates the following sparse warning: arch/arm/plat-omap/dma.c:137:5: warning: symbol 'omap_dma_in_1510_mode' was not declared. Should it be static? Signed-off-by:
-
Felipe Balbi authored
Fix the following compile warning: arch/arm/mach-omap2/irq.c:64:31: warning: 'intc_context' defined but not used Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
Fix the following section mismatches: WARNING: arch/arm/mach-omap1/built-in.o(.data+0x491c): Section mismatch in reference from the variable fsample_config to the (unknown reference) .init.data:(unknown) The variable fsample_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: arch/arm/mach-omap1/built-in.o(.data+0x8f0c): Section mismatch in reference from the variable ams_delta_config to the (unknown reference) .init.data:(unknown) The variable ams_delta_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: arch/arm/mach-omap1/built-in.o(.data+0x93ac): Section mismatch in reference from the variable ams_delta_camera_device to the (unknown reference) .init.data:(unknown) The variable ams_delta_camera_device references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x5e94): Section mismatch in reference from the variable fsample_config to the (unknown reference) .init.data:(unknown) The variable fsample_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0xa484): Section mismatch in reference from the variable ams_delta_config to the (unknown reference) .init.data:(unknown) The variable ams_delta_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0xa924): Section mismatch in reference from the variable ams_delta_camera_device to the (unknown reference) .init.data:(unknown) The variable ams_delta_camera_device references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by:
-
Felipe Balbi authored
Fix the following compile warnings: arch/arm/mach-omap1/board-innovator.c:165:3: warning: initialization makes integer from pointer without a cast arch/arm/mach-omap1/board-perseus2.c:305:3: warning: initialization makes integer from pointer without a cast arch/arm/mach-omap1/board-fsample.c:338:3: warning: initialization makes integer from pointer without a cast Signed-off-by:
-
Felipe Balbi authored
Fix the following compile warning: arch/arm/mach-omap1/board-palmte.c:233:13: warning: 'palmte_headphones_detect' defined but not used Signed-off-by:
-
Felipe Balbi authored
Fix the following compile warning: arch/arm/plat-omap/i2c.c:120:13: warning: 'omap_pm_set_max_mpu_wakeup_lat_compat' defined but not used arch/arm/plat-omap/i2c.c:125:38: warning: 'omap_i2c_latency' defined but not used Signed-off-by:
-
Tony Lindgren authored
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by:
Thomas Weber <weber@corscience.de> Acked-by:
Sourav Poddar <sourav.poddar@ti.com>
-
Julia Lawall authored
This code elsewhere returns a negative constant to an indicate an error, while IS_ERR returns the result of a >= operation. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ if (...) { ... - return IS_ERR(x); + return PTR_ERR(x); } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Jarkko Nikula <jhnikula@gmail.com> Signed-off-by:
-
Felipe Balbi authored
Commit 8419fdba (omap2+: Add omap_mux_get_by_name) introduced the following compile warning: arch/arm/mach-omap2/mux.c: In function '_omap_mux_get_by_name': arch/arm/mach-omap2/mux.c:163:17: warning: 'found_mode' may be used uninitialized in this function Signed-off-by:
-
- 27 Jan, 2011 2 commits
-
-
Tony Lindgren authored
Commit 03a9e512 (omap1: Use asm_irq_flags for entry-macro.S) added support for multi-omap builds with addition of the omap_irq_flags. Commit 9f9605c2 (omap2+: Fix unused variable warning for omap_irq_base) simplified omap2+ entry-macro.S by moving omap_irq_flags out of entry-macro.S. Simplify omap1 entry-macro.S in a similar way to keep the code consistent. Based on a similar earlier patch for omap2+ by Russell King <rmk+kernel@arm.linux.org.uk>. Signed-off-by:
-
Russell King authored
Commit 5d190c40 (omap2+: Initialize omap_irq_base for entry-macro.S from platform code) simplified the handling of omap_irq_base for multi-omap builds. However, this patch also introduced a build warning for !MULTI_OMAP2 builds: arch/arm/mach-omap2/io.c: In function 'omap_irq_base_init': arch/arm/mach-omap2/io.c:322: warning: unused variable 'omap_irq_base' Fix this by removing the ifdef. Also simplify things further by moving omap_irq_base out of entry-macro.S. Signed-off-by:
-
- 26 Jan, 2011 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - pass touch resolution to clients through input_absinfo Input: wacom - add 2 Bamboo Pen and touch models Input: sysrq - ensure sysrq_enabled and __sysrq_enabled are consistent Input: sparse-keymap - fix KEY_VSW handling in sparse_keymap_setup Input: tegra-kbc - add tegra keyboard driver Input: gpio_keys - switch to using request_any_context_irq Input: serio - allow registered drivers to get status flag Input: ct82710c - return proper error code for ct82c710_open Input: bu21013_ts - added regulator support Input: bu21013_ts - remove duplicate resolution parameters Input: tnetv107x-ts - don't treat NULL clk as an error Input: tnetv107x-keypad - don't treat NULL clk as an error Fix up trivial conflicts in drivers/input/keyboard/Makefile due to additions of tc3589x/Tegra drivers
-
Ping Cheng authored
Also remove fake ABS_RX/ABS_RY "axes" that were used to report physical dimensions now that we have better way. Signed-off-by:
Ping Cheng <pingc@wacom.com> Reviewed-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
Torben Hohn authored
The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by:
Torben Hohn <torbenh@gmx.de> Cc: Thomas Gleixner <tglx@tglx.de> Cc: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Phillip Lougher authored
Fix potential use of uninitialised variable caused by recent decompressor code optimisations. In zlib_uncompress (zlib_wrapper.c) we have int zlib_err, zlib_init = 0; ... do { ... if (avail == 0) { offset = 0; put_bh(bh[k++]); continue; } ... zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH); ... } while (zlib_err == Z_OK); If continue is executed (avail == 0) then the while condition will be evaluated testing zlib_err, which is uninitialised first time around the loop. Fix this by getting rid of the 'if (avail == 0)' condition test, this edge condition should not be being handled in the decompressor code, and instead handle it generically in the caller code. Similarly for xz_wrapper.c. Incidentally, on most architectures (bar Mips and Parisc), no uninitialised variable warning is generated by gcc, this is because the while condition test on continue is optimised out and not performed (when executing continue zlib_err has not been changed since entering the loop, and logically if the while condition was true previously, then it's still true). Signed-off-by:Phillip Lougher <phillip@lougher.demon.co.uk> Reported-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Toshiyuki Okajima authored
Executed command: fsstress -d /mnt -n 600 -p 850 crash> bt PID: 7947 TASK: ffff880160546a70 CPU: 0 COMMAND: "fsstress" #0 [ffff8800dfc07d00] machine_kexec at ffffffff81030db9 #1 [ffff8800dfc07d70] crash_kexec at ffffffff810a7952 #2 [ffff8800dfc07e40] oops_end at ffffffff814aa7c8 #3 [ffff8800dfc07e70] die_nmi at ffffffff814aa969 #4 [ffff8800dfc07ea0] do_nmi_callback at ffffffff8102b07b #5 [ffff8800dfc07f10] do_nmi at ffffffff814aa514 #6 [ffff8800dfc07f50] nmi at ffffffff814a9d60 [exception RIP: __lookup_tag+100] RIP: ffffffff812274b4 RSP: ffff88016056b998 RFLAGS: 00000287 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000006 RDX: 000000000000001d RSI: ffff88016056bb18 RDI: ffff8800c85366e0 RBP: ffff88016056b9c8 R8: ffff88016056b9e8 R9: 0000000000000000 R10: 000000000000000e R11: ffff8800c8536908 R12: 0000000000000010 R13: 0000000000000040 R14: ffffffffffffffc0 R15: ffff8800c85366e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> #7 [ffff88016056b998] __lookup_tag at ffffffff812274b4 #8 [ffff88016056b9d0] radix_tree_gang_lookup_tag_slot at ffffffff81227605 #9 [ffff88016056ba20] find_get_pages_tag at ffffffff810fc110 #10 [ffff88016056ba80] pagevec_lookup_tag at ffffffff81105e85 #11 [ffff88016056baa0] write_cache_pages at ffffffff81104c47 #12 [ffff88016056bbd0] generic_writepages at ffffffff81105014 #13 [ffff88016056bbe0] do_writepages at ffffffff81105055 #14 [ffff88016056bbf0] __filemap_fdatawrite_range at ffffffff810fb2cb #15 [ffff88016056bc40] filemap_write_and_wait_range at ffffffff810fb32a #16 [ffff88016056bc70] generic_file_direct_write at ffffffff810fb3dc #17 [ffff88016056bce0] __generic_file_aio_write at ffffffff810fcee5 #18 [ffff88016056bda0] generic_file_aio_write at ffffffff810fd085 #19 [ffff88016056bdf0] do_sync_write at ffffffff8114f9ea #20 [ffff88016056bf00] vfs_write at ffffffff8114fcf8 #21 [ffff88016056bf30] sys_write at ffffffff81150691 #22 [ffff88016056bf80] system_call_fastpath at ffffffff8100c0b2 I think this root cause is the following: radix_tree_range_tag_if_tagged() always tags the root tag with settag if the root tag is set with iftag even if there are no iftag tags in the specified range (Of course, there are some iftag tags outside the specified range). =============================================================================== [[[Detailed description]]] (1) Why cannot radix_tree_gang_lookup_tag_slot() return forever? __lookup_tag(): - Return with 0. - Return with the index which is not bigger than the old one as the input parameter. Therefore the following "while" repeats forever because the above conditions cause "ret" not to be updated and the cur_index cannot be changed into the bigger one. (So, radix_tree_gang_lookup_tag_slot() cannot return forever.) radix_tree_gang_lookup_tag_slot(): 1178 while (ret < max_items) { 1179 unsigned int slots_found; 1180 unsigned long next_index; /* Index of next search */ 1181 1182 if (cur_index > max_index) 1183 break; 1184 slots_found = __lookup_tag(node, results + ret, 1185 cur_index, max_items - ret, &next_index, tag); 1186 ret += slots_found; // cannot update ret because slots_found == 0. // so, this while loops forever. 1187 if (next_index == 0) 1188 break; 1189 cur_index = next_index; 1190 } (2) Why does __lookup_tag() return with 0 and doesn't update the index? Assuming the following: - the one of the slot in radix_tree_node is NULL. - the one of the tag which corresponds to the slot sets with PAGECACHE_TAG_TOWRITE or other. - In a certain height(!=0), the corresponding index is 0. a) __lookup_tag() notices that the tag is set. 1005 static unsigned int 1006 __lookup_tag(struct radix_tree_node *slot, void ***results, unsigned long index, 1007 unsigned int max_items, unsigned long *next_index, unsigned int tag) 1008 { 1009 unsigned int nr_found = 0; 1010 unsigned int shift, height; 1011 1012 height = slot->height; 1013 if (height == 0) 1014 goto out; 1015 shift = (height-1) * RADIX_TREE_MAP_SHIFT; 1016 1017 while (height > 0) { 1018 unsigned long i = (index >> shift) & RADIX_TREE_MAP_MASK ; 1019 1020 for (;;) { 1021 if (tag_get(slot, tag, i)) 1022 break; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ * the index is not updated yet. b) __lookup_tag() notices that the slot is NULL. 1023 index &= ~((1UL << shift) - 1); 1024 index += 1UL << shift; 1025 if (index == 0) 1026 goto out; /* 32-bit wraparound */ 1027 i++; 1028 if (i == RADIX_TREE_MAP_SIZE) 1029 goto out; 1030 } 1031 height--; 1032 if (height == 0) { /* Bottom level: grab some items */ ... 1055 } 1056 shift -= RADIX_TREE_MAP_SHIFT; 1057 slot = rcu_dereference_raw(slot->slots[i]); 1058 if (slot == NULL) 1059 break; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ c) __lookup_tag() doesn't update the index and return with 0. 1060 } 1061 out: 1062 *next_index = index; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1063 return nr_found; 1064 } (3) Why is the slot NULL even if the tag is set? Because radix_tree_range_tag_if_tagged() always sets the root tag with PAGECACHE_TAG_TOWRITE if the root tag is set with PAGECACHE_TAG_DIRTY, even if there is no tag which can be set with PAGECACHE_TAG_TOWRITE in the specified range (from *first_indexp to last_index). Of course, some PAGECACHE_TAG_DIRTY nodes must exist outside the specified range. (radix_tree_range_tag_if_tagged() is called only from tag_pages_for_writeback()) 640 unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root, 641 unsigned long *first_indexp, unsigned long last_index, 642 unsigned long nr_to_tag, 643 unsigned int iftag, unsigned int settag) 644 { 645 unsigned int height = root->height; 646 struct radix_tree_path path[height]; 647 struct radix_tree_path *pathp = path; 648 struct radix_tree_node *slot; 649 unsigned int shift; 650 unsigned long tagged = 0; 651 unsigned long index = *first_indexp; 652 653 last_index = min(last_index, radix_tree_maxindex(height)); 654 if (index > last_index) 655 return 0; 656 if (!nr_to_tag) 657 return 0; 658 if (!root_tag_get(root, iftag)) { 659 *first_indexp = last_index + 1; 660 return 0; 661 } 662 if (height == 0) { 663 *first_indexp = last_index + 1; 664 root_tag_set(root, settag); 665 return 1; 666 } ... 733 root_tag_set(root, settag); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 734 *first_indexp = index; 735 736 return tagged; 737 } As the result, there is no radix_tree_node which is set with PAGECACHE_TAG_TOWRITE but the root tag(radix_tree_root) is set with PAGECACHE_TAG_TOWRITE. [figure: inside radix_tree] (Please see the figure with typewriter font) =========================================== [roottag = DIRTY] | tag=0:NOTHING tag[0 0 0 1] 1:DIRTY [x x x +] 2:WRITEBACK | 3:DIRTY,WRITEBACK p 4:TOWRITE <---> 5:DIRTY,TOWRITE ... specified range (index: 0 to 2) * There is no DIRTY tag within the specified range. (But there is a DIRTY tag outside that range.) | | | | | | | | | after calling tag_pages_for_writeback() | | | | | | | | | v v v v v v v v v [roottag = DIRTY,TOWRITE] | p is "page". tag[0 0 0 1] x is NULL. [x x x +] +- is a pointer to "page". | p * But TOWRITE tag is set on the root tag. ============================================ After that, radix_tree_extend() via radix_tree_insert() is called when the page is added. This function sets the new radix_tree_node with PAGECACHE_TAG_TOWRITE to succeed the status of the root tag. 246 static int radix_tree_extend(struct radix_tree_root *root, unsigned long index) 247 { 248 struct radix_tree_node *node; 249 unsigned int height; 250 int tag; 251 252 /* Figure out what the height should be. */ 253 height = root->height + 1; 254 while (index > radix_tree_maxindex(height)) 255 height++; 256 257 if (root->rnode == NULL) { 258 root->height = height; 259 goto out; 260 } 261 262 do { 263 unsigned int newheight; 264 if (!(node = radix_tree_node_alloc(root))) 265 return -ENOMEM; 266 267 /* Increase the height. */ 268 node->slots[0] = radix_tree_indirect_to_ptr(root->rnode); 269 270 /* Propagate the aggregated tag info into the new root */ 271 for (tag = 0; tag < RADIX_TREE_MAX_TAGS; tag++) { 272 if (root_tag_get(root, tag)) 273 tag_set(node, tag, 0); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 274 } =========================================== [roottag = DIRTY,TOWRITE] | : tag[0 0 0 1] [0 0 0 0] [x x x +] [+ x x x] | | p p (new page) | | | | | | | | | after calling radix_tree_insert | | | | | | | | | v v v v v v v v v [roottag = DIRTY,TOWRITE] | tag [5 0 0 0] * DIRTY and TOWRITE tags are [+ + x x] succeeded to the new node. | | tag [0 0 0 1] [0 0 0 0] [x x x +] [+ x x x] | | p p ============================================ After that, the index 3 page is released by remove_from_page_cache(). Then we can make the situation that the tag is set with PAGECACHE_TAG_TOWRITE and that the slot which corresponds to the tag is NULL. =========================================== [roottag = DIRTY,TOWRITE] | tag [5 0 0 0] [+ + x x] | | tag [0 0 0 1] [0 0 0 0] [x x x +] [+ x x x] | | p p (remove) | | | | | | | | | after calling remove_page_cache | | | | | | | | | v v v v v v v v v [roottag = DIRTY,TOWRITE] | tag [4 0 0 0] * Only DIRTY tag is cleared [x + x x] because no TOWRITE tag is existed | in the bottom node. [0 0 0 0] [+ x x x] | p ============================================ To solve this problem Change to that radix_tree_tag_if_tagged() doesn't tag the root tag if it doesn't set any tags within the specified range. Like this. ============================================ 640 unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root, 641 unsigned long *first_indexp, unsigned long last_index, 642 unsigned long nr_to_tag, 643 unsigned int iftag, unsigned int settag) 644 { 650 unsigned long tagged = 0; ... 733 if (tagged) ^^^^^^^^^^^^^^^^^^^^^^^^ 734 root_tag_set(root, settag); 735 *first_indexp = index; 736 737 return tagged; 738 } ============================================ Signed-off-by:Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Acked-by:
Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Voss, Nikolaus authored
setup_irq() was called before clockevents_register_device() which is needed by the irq handler. Bug was reproducible by restarting the kernel using kexec (reliable crash). Signed-off-by:
Nikolaus Voss <n.voss@weinmann.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
A fix up mem_cgroup_move_parent() which use compound_order() in asynchronous manner. This compound_order() may return unknown value because we don't take lock. Use PageTransHuge() and HPAGE_SIZE instead of it. Also clean up for mem_cgroup_move_parent(). - remove unnecessary initialization of local variable. - rename charge_size -> page_size - remove unnecessary (wrong) comment. - added a comment about THP. Note: Current design take compound_page_lock() in caller of move_account(). This should be revisited when we implement direct move_task of hugepage without splitting. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
mem_cgroup_disabled() should be checked at splitting. If disabled, no heavy work is necesary. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Commit 4b534334 ("memcg: clean up try_charge main loop") removes a cancel of charge at case: memory charge-> success. mem+swap charge-> failure. This leaks usage of memory. Fix it. Signed-off-by:
-
Minchan Kim authored
Callers of migrate_pages should putback_lru_pages to return pages isolated to LRU or free list. Now comment is rather confusing. It says caller always have to call it. It is more clear to point out that the caller has to call it if migrate_pages's return value isn't zero. Signed-off-by:
Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Andrea Arcangeli authored
Commit 5d689240 ("thp: select CONFIG_COMPACTION if TRANSPARENT_HUGEPAGE enabled") causes this warning during the configuration process: warning: (TRANSPARENT_HUGEPAGE) selects COMPACTION which has unmet direct dependencies (EXPERIMENTAL && HUGETLB_PAGE && MMU) COMPACTION doesn't depend on HUGETLB_PAGE, it doesn't depend on THP either, it is also useful for regular alloc_pages(order > 0) including the very kernel stack during fork (THREAD_ORDER = 1). It's always better to enable COMPACTION. The warning should be an error because we would end up with MIGRATION not selected, and COMPACTION wouldn't work without migration (despite it seems to build with an inline migrate_pages returning -ENOSYS). I'd also like to remove EXPERIMENTAL: compaction has been in the kernel for some releases (for full safety the default remains disabled which I think is enough). Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Luca Tettamanti <kronos.it@gmail.com> Tested-by:
-
Jesper Juhl authored
In mm/memcontrol.c::mem_cgroup_move_parent() there's a path that jumps to the 'put_back' label ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false, charge); if (ret || !parent) goto put_back; where we'll if (charge > PAGE_SIZE) compound_unlock_irqrestore(page, flags); but, we have not assigned anything to 'flags' at this point, nor have we called 'compound_lock_irqsave()' (which is what sets 'flags'). The 'put_back' label should be moved below the call to compound_unlock_irqrestore() as per this patch. Signed-off-by:
-
David Rientjes authored
Commit 0e093d99 ("writeback: do not sleep on the congestion queue if there are no congested BDIs or if significant congestion is not being encountered in the current zone") uncovered a livelock in the page allocator that resulted in tasks infinitely looping trying to find memory and kswapd running at 100% cpu. The issue occurs because drain_all_pages() is called immediately following direct reclaim when no memory is freed and try_to_free_pages() returns non-zero because all zones in the zonelist do not have their all_unreclaimable flag set. When draining the per-cpu pagesets back to the buddy allocator for each zone, the zone->pages_scanned counter is cleared to avoid erroneously setting zone->all_unreclaimable later. The problem is that no pages may actually be drained and, thus, the unreclaimable logic never fails direct reclaim so the oom killer may be invoked. This apparently only manifested after wait_iff_congested() was introduced and the zone was full of anonymous memory that would not congest the backing store. The page allocator would infinitely loop if there were no other tasks waiting to be scheduled and clear zone->pages_scanned because of drain_all_pages() as the result of this change before kswapd could scan enough pages to trigger the reclaim logic. Additionally, with every loop of the page allocator and in the reclaim path, kswapd would be kicked and would end up running at 100% cpu. In this scenario, current and kswapd are all running continuously with kswapd incrementing zone->pages_scanned and current clearing it. The problem is even more pronounced when current swaps some of its memory to swap cache and the reclaimable logic then considers all active anonymous memory in the all_unreclaimable logic, which requires a much higher zone->pages_scanned value for try_to_free_pages() to return zero that is never attainable in this scenario. Before wait_iff_congested(), the page allocator would incur an unconditional timeout and allow kswapd to elevate zone->pages_scanned to a level that the oom killer would be called the next time it loops. The fix is to only attempt to drain pcp pages if there is actually a quantity to be drained. The unconditional clearing of zone->pages_scanned in free_pcppages_bulk() need not be changed since other callers already ensure that draining will occur. This patch ensures that free_pcppages_bulk() will actually free memory before calling into it from drain_all_pages() so zone->pages_scanned is only cleared if appropriate. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
David Rientjes authored
Before 0e093d99 ("writeback: do not sleep on the congestion queue if there are no congested BDIs or if significant congestion is not being encountered in the current zone"), preferred_zone was only used for NUMA statistics, to determine the zoneidx from which to allocate from given the type requested, and whether to utilize memory compaction. wait_iff_congested(), though, uses preferred_zone to determine if the congestion wait should be deferred because its dirty pages are backed by a congested bdi. This incorrectly defers the timeout and busy loops in the page allocator with various cond_resched() calls if preferred_zone is not allowed in the current context, usually consuming 100% of a cpu. This patch ensures preferred_zone is an allowed zone in the fastpath depending on whether current is constrained by its cpuset or nodes in its mempolicy (when the nodemask passed is non-NULL). This is correct since the fastpath allocation always passes ALLOC_CPUSET when trying to allocate memory. In the slowpath, this patch resets preferred_zone to the first zone of the allowed type when the allocation is not constrained by current's cpuset, i.e. it does not pass ALLOC_CPUSET. This patch also ensures preferred_zone is from the set of allowed nodes when called from within direct reclaim since allocations are always constrained by cpusets in this context (it is blockable). Both of these uses of cpuset_current_mems_allowed are protected by get_mems_allowed(). Signed-off-by:
-
Alexander Gordeev authored
Both pps_parport and pps_gen_parport are written in a way that they can't share a port with any other driver. This can result in locking up the process that loads modules or even the whole kernel if the modules are compiled in. Use PARPORT_FLAG_EXCL to indicate this. Signed-off-by:
Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Rodolfo Giometti authored
Signed-off-by:
Rodolfo Giometti <giometti@linux.it> Reported-by:
Ingo Molnar <mingo@elte.hu> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by:
-
Alexander Gordeev authored
parport_unregister_device() should never be used when interrupts are enabled in hardware and irq handler is registered so there is no need to disable interrupts when using waitlist_lock. But there is no way to explain this subtle semantics to lockdep analyzer. So disable interrupts here too to simplify things. The price is negligible. Signed-off-by:
-
Feng Tang authored
Latest kernel has many changes in IRQ subsystem and its interfaces, like adding "irq_eoi" for struct irq_chip, this patch is a follow up change for that. Also remove the unnecessary cast for a "void *". Signed-off-by:
Feng Tang <feng.tang@intel.com> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Axel Lin authored
Return PTR_ERR(led_dat->pwm) instead of 0 if pwm_request failed Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Luotao Fu <l.fu@pengutronix.de> Cc: Reviewed-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Andrew Morton authored
mips (and sparc32): In file included from arch/mips/include/asm/tlb.h:21, from mm/pgtable-generic.c:9: include/asm-generic/tlb.h: In function `tlb_flush_mmu': include/asm-generic/tlb.h:76: error: implicit declaration of function `release_pages' include/asm-generic/tlb.h: In function `tlb_remove_page': include/asm-generic/tlb.h:105: error: implicit declaration of function `page_cache_release' free_pages_and_swap_cache() and free_page_and_swap_cache() are macros which call release_pages() and page_cache_release(). The obvious fix is to include pagemap.h in swap.h, where those macros are defined. But that breaks sparc for weird reasons. So fix it within mm/pgtable-generic.c instead. Reported-by:Yoichi Yuasa <yuasa@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by:
-
Andrea Arcangeli authored
This fixes TRANSPARENT_HUGEPAGE=y with PARAVIRT=y and HIGHMEM64=n. The #ifdef that this patch removes was erratically introduced to fix a build error for noPAE (where pmd.pmd doesn't exist). So then the kernel built but it failed at runtime because set_pmd_at was a noop. This will correct it by enabling set_pmd_at for noPAE mode too. Signed-off-by:
werner <w.landgraf@ru.ru> Reported-by:
-
- 25 Jan, 2011 3 commits
-
-
Linus Torvalds authored
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ALSA: AACI: fix timeout duration ALSA: AACI: fix timeout condition checking ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio mode ARM: 6637/1: Make the argument to virt_to_phys() "const volatile" ARM: twd: ensure timer reload is reprogrammed on entry to periodic mode ARM: 6635/2: Configure reference clock for Versatile Express timers ARM: versatile: name configuration options after actual board names ARM: realview: name configuration options after actual board names ARM: realview,vexpress: fix section mismatch warning for pen_release ARM: 6632/3: mmci: stop using the blockend interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix crash after one superblock became unavailable
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/amiga: Fix "debug=mem" m68k/atari: Rename "scc" to "atari_scc" m68k: Uninline strchr()
-
