- 05 Feb, 2020 33 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes and cleanups for 5.6 - fix register corruption - ENOTSUPP/EOPNOTSUPP mixed - reset cleanups/fixes - selftests
-
Paolo Bonzini authored
Userspace that does not know about the AMD_IBRS bit might still allow the guest to protect itself with MSR_IA32_SPEC_CTRL using the Intel SPEC_CTRL bit. However, svm.c disallows this and will cause a #GP in the guest when writing to the MSR. Fix this by loosening the test and allowing the Intel CPUID bit, and in fact allow the AMD_STIBP bit as well since it allows writing to MSR_IA32_SPEC_CTRL too. Reported-by:
Zhiyi Guo <zhguo@redhat.com> Analyzed-by:
Dr. David Alan Gilbert <dgilbert@redhat.com> Analyzed-by:
Laszlo Ersek <lersek@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Eric Hankland authored
Correct the logic in intel_pmu_set_msr() for fixed and general purpose counters. This was recently changed to set pmc->counter without taking in to account the value of pmc_read_counter() which will be incorrect if the counter is currently running and non-zero; this changes back to the old logic which accounted for the value of currently running counters. Signed-off-by:
Eric Hankland <ehankland@google.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Sane L1 hypervisors are not supposed to turn any of the unsupported VMX controls on for its guests and nested_vmx_check_controls() checks for that. This is, however, not the case for the controls which are supported on the host but are missing in enlightened VMCS and when eVMCS is in use. It would certainly be possible to add these missing checks to nested_check_vm_execution_controls()/_vm_exit_controls()/.. but it seems preferable to keep eVMCS-specific stuff in eVMCS and reduce the impact on non-eVMCS guests by doing less unrelated checks. Create a separate nested_evmcs_check_controls() for this purpose. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
With fine grained VMX feature enablement QEMU>=4.2 tries to do KVM_SET_MSRS with default (matching CPU model) values and in case eVMCS is also enabled, fails. It would be possible to drop VMX feature filtering completely and make this a guest's responsibility: if it decides to use eVMCS it should know which fields are available and which are not. Hyper-V mostly complies to this, however, there are some problematic controls: SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL which Hyper-V enables. As there are no corresponding fields in eVMCS, we can't handle this properly in KVM. This is a Hyper-V issue. Move VMX controls sanitization from nested_enable_evmcs() to vmx_get_msr(), and do the bare minimum (only clear controls which are known to cause issues). This allows userspace to keep setting controls it wants and at the same time hides them from the guest. Signed-off-by: -
Ben Gardon authored
Separate the functions for generating MMIO page table entries from the function that inserts them into the paging structure. This refactoring will facilitate changes to the MMU sychronization model to use atomic compare / exchanges (which are not guaranteed to succeed) instead of a monolithic MMU lock. No functional change expected. Tested by running kvm-unit-tests on an Intel Haswell machine. This commit introduced no new failures. Signed-off-by:
Ben Gardon <bgardon@google.com> Reviewed-by:
Oliver Upton <oupton@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Signed-off-by:
-
Ben Gardon authored
There are several functions which pass an access permission mask for SPTEs as an unsigned. This works, but checkpatch complains about it. Switch the occurrences of unsigned to unsigned int to satisfy checkpatch. No functional change expected. Tested by running kvm-unit-tests on an Intel Haswell machine. This commit introduced no new failures. Signed-off-by:
-
Sean Christopherson authored
The blurb pertaining to the return value of nested_vmx_load_cr3() no longer matches reality, remove it entirely as the behavior it is attempting to document is quite obvious when reading the actual code. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by:
-
Sean Christopherson authored
Fold kvm_mips_comparecount_func() into kvm_mips_comparecount_wakeup() to eliminate the nondescript function name as well as its unnecessary cast of a vcpu to "unsigned long" and back to a vcpu. Presumably func() was used as a callback at some point during pre-upstream development, as wakeup() is the only user of func() and has been the only user since both with introduced by commit 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM"). Cc: Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Sean Christopherson authored
Hoist kvm_mips_comparecount_wakeup() above its only user, kvm_arch_vcpu_create() to fix a compilation error due to referencing an undefined function. Fixes: d11dfed5 ("KVM: MIPS: Move all vcpu init code into kvm_arch_vcpu_create()") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
kvm_setup_pv_tlb_flush will waste memory and print a misguiding message when KVM paravirtualization is not available. Intel SDM says that the when cpuid is used with EAX higher than the maximum supported value for basic of extended function, the data for the highest supported basic function will be returned. So, in some systems, kvm_arch_para_features will return bogus data, causing kvm_setup_pv_tlb_flush to detect support for pv tlb flush. Testing for kvm_para_available will work as it checks for the hypervisor signature. Besides, when the "nopv" command line parameter is used, it should not continue as well, as kvm_guest_init will no be called in that case. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
-
Zhuang Yanying authored
We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: … error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 … Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by:
LinFeng <linfeng23@huawei.com> Signed-off-by:
Zhuang Yanying <ann.zhuangyanying@huawei.com> Signed-off-by:
-
Sean Christopherson authored
Take a u64 instead of an unsigned long in kvm_dr7_valid() to fix a build warning on i386 due to right-shifting a 32-bit value by 32 when checking for bits being set in dr7[63:32]. Alternatively, the warning could be resolved by rewriting the check to use an i386-friendly method, but taking a u64 fixes another oddity on 32-bit KVM. Beause KVM implements natural width VMCS fields as u64s to avoid layout issues between 32-bit and 64-bit, a devious guest can stuff vmcs12->guest_dr7 with a 64-bit value even when both the guest and host are 32-bit kernels. KVM eventually drops vmcs12->guest_dr7[63:32] when propagating vmcs12->guest_dr7 to vmcs02, but ideally KVM would not rely on that behavior for correctness. Cc: Jim Mattson <jmattson@google.com> Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com> Fixes: ecb697d10f70 ("KVM: nVMX: Check GUEST_DR7 on vmentry of nested guests") Reported-by:Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Paolo Bonzini authored
Commit 53fafdbb ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") changed kvmclock to use tkr_raw instead of tkr_mono. However, the default kvmclock_offset for the VM was still based on the monotonic clock and, if the raw clock drifted enough from the monotonic clock, this could cause a negative system_time to be written to the guest's struct pvclock. RHEL5 does not like it and (if it boots fast enough to observe a negative time value) it hangs. There is another thing to be careful about: getboottime64 returns the host boot time with tkr_mono frequency, and subtracting the tkr_raw-based kvmclock value will cause the wallclock to be off if tkr_raw drifts from tkr_mono. To avoid this, compute the wallclock delta from the current time instead of being clever and using getboottime64. Fixes: 53fafdbb ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") Cc: stable@vger.kernel.org Reviewed-by:
-
Paolo Bonzini authored
We will need a copy of tk->offs_boot in the next patch. Store it and cleanup the struct: instead of storing tk->tkr_xxx.base with the tk->offs_boot included, store the raw value in struct pvclock_clock and sum it in do_monotonic_raw and do_realtime. tk->tkr_xxx.xtime_nsec also moves to struct pvclock_clock. While at it, fix a (usually harmless) typo in do_monotonic_raw, which was using gtod->clock.shift instead of gtod->raw_clock.shift. Fixes: 53fafdbb ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") Cc: stable@vger.kernel.org Reviewed-by:
-
Miaohe Lin authored
The function nested_vmx_run() declaration is below its implementation. So this is meaningless and should be removed. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Reviewed-by:
-
Paolo Bonzini authored
SVM is now able to disable AVIC dynamically whenever the in-kernel PIT sets up an ack notifier, so we can enable it even if in-kernel IOAPIC/PIC/PIT are in use. Signed-off-by: -
Suravee Suthikulpanit authored
In-kernel IOAPIC does not receive EOI with AMD SVM AVIC since the processor accelerate write to APIC EOI register and does not trap if the interrupt is edge-triggered. Workaround this by lazy check for pending APIC EOI at the time when setting new IOPIC irq, and update IOAPIC EOI if no pending APIC EOI. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
-
Suravee Suthikulpanit authored
Refactor code for handling IOAPIC EOI for subsequent patch. There is no functional change. Signed-off-by:
-
Suravee Suthikulpanit authored
AMD SVM AVIC accelerates EOI write and does not trap. This causes in-kernel PIT re-injection mode to fail since it relies on irq-ack notifier mechanism. So, APICv is activated only when in-kernel PIT is in discard mode e.g. w/ qemu option: -global kvm-pit.lost_tick_policy=discard Also, introduce APICV_INHIBIT_REASON_PIT_REINJ bit to be used for this reason. Suggested-by:
-
Suravee Suthikulpanit authored
AMD AVIC does not support ExtINT. Therefore, AVIC must be temporary deactivated and fall back to using legacy interrupt injection via vINTR and interrupt window. Also, introduce APICV_INHIBIT_REASON_IRQWIN to be used for this reason. Signed-off-by:
-
Suravee Suthikulpanit authored
Since AVIC does not currently work w/ nested virtualization, deactivate AVIC for the guest if setting CPUID Fn80000001_ECX[SVM] (i.e. indicate support for SVM, which is needed for nested virtualization). Also, introduce a new APICV_INHIBIT_REASON_NESTED bit to be used for this reason. Suggested-by:
Alexander Graf <graf@amazon.com> Signed-off-by:
-
Suravee Suthikulpanit authored
Since disabling APICv has to be done for all vcpus on AMD-based system, adopt the newly introduced kvm_request_apicv_update() interface, and introduce a new APICV_INHIBIT_REASON_HYPERV. Also, remove the kvm_vcpu_deactivate_apicv() since no longer used. Cc: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
-
Suravee Suthikulpanit authored
Add necessary logics to support (de)activate AVIC at runtime. Signed-off-by:
-
Suravee Suthikulpanit authored
AMD SVM AVIC needs to update APIC backing page mapping before changing APICv mode. Introduce struct kvm_x86_ops.pre_update_apicv_exec_ctrl function hook to be called prior KVM APICv update request to each vcpu. Signed-off-by:
-
Suravee Suthikulpanit authored
Inibit reason bits are used to determine if APICv deactivation is applicable for a particular hardware virtualization architecture. Signed-off-by:
-
Suravee Suthikulpanit authored
Re-factor avic_init_access_page() to avic_update_access_page() since activate/deactivate AVIC requires setting/unsetting the memory region used for virtual APIC backing page (APIC_ACCESS_PAGE_PRIVATE_MEMSLOT). Signed-off-by:
-
Suravee Suthikulpanit authored
Introduce interface for (de)activate posted interrupts, and implement SVM hooks to toggle AMD IOMMU guest virtual APIC mode. Signed-off-by:
-
Suravee Suthikulpanit authored
Add trace points when sending request to (de)activate APICv. Suggested-by:
-
Suravee Suthikulpanit authored
Certain runtime conditions require APICv to be temporary deactivated during runtime. The current implementation only support run-time deactivation of APICv when Hyper-V SynIC is enabled, which is not temporary. In addition, for AMD, when APICv is (de)activated at runtime, all vcpus in the VM have to operate in the same mode. Thus the requesting vcpu must notify the others. So, introduce the following: * A new KVM_REQ_APICV_UPDATE request bit * Interfaces to request all vcpus to update APICv status * A new interface to update APICV-related parameters for each vcpu Signed-off-by:
-
Paolo Bonzini authored
It is unused now. Signed-off-by: -
Suravee Suthikulpanit authored
There are several reasons in which a VM needs to deactivate APICv e.g. disable APICv via parameter during module loading, or when enable Hyper-V SynIC support. Additional inhibit reasons will be introduced later on when dynamic APICv is supported, Introduce KVM APICv inhibit reason bits along with a new variable, apicv_inhibit_reasons, to help keep track of APICv state for each VM, Initially, the APICV_INHIBIT_REASON_DISABLE bit is used to indicate the case where APICv is disabled during KVM module load. (e.g. insmod kvm_amd avic=0 or insmod kvm_intel enable_apicv=0). Signed-off-by:
-
Suravee Suthikulpanit authored
Re-factor code into a helper function for setting lapic parameters when activate/deactivate APICv, and export the function for subsequent usage. Signed-off-by:
-
- 31 Jan, 2020 7 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Paolo Bonzini: "This is the first batch of KVM changes. ARM: - cleanups and corner case fixes. PPC: - Bugfixes x86: - Support for mapping DAX areas with large nested page table entries. - Cleanups and bugfixes here too. A particularly important one is a fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is also a race condition which could be used in guest userspace to exploit the guest kernel, for which the embargo expired today. - Fast path for IPI delivery vmexits, shaving about 200 clock cycles from IPI latency. - Protect against "Spectre-v1/L1TF" (bring data in the cache via speculative out of bound accesses, use L1TF on the sibling hyperthread to read it), which unfortunately is an even bigger whack-a-mole game than SpectreV1. Sean continues his mission to rewrite KVM. In addition to a sizable number of x86 patches, this time he contributed a pretty large refactoring of vCPU creation that affects all architectures but should not have any visible effect. s390 will come next week together with some more x86 patches" * tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) x86/KVM: Clean up host's steal time structure x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed x86/kvm: Cache gfn to pfn translation x86/kvm: Introduce kvm_(un)map_gfn() x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit KVM: PPC: Book3S PR: Fix -Werror=return-type build failure KVM: PPC: Book3S HV: Release lock on page-out failure path KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer KVM: arm64: pmu: Only handle supported event counters KVM: arm64: pmu: Fix chained SW_INCR counters KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset KVM: x86: Use a typedef for fastop functions KVM: X86: Add 'else' to unify fastop and execute call path KVM: x86: inline memslot_valid_for_gpte KVM: x86/mmu: Use huge pages for DAX-backed files KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte() KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust() KVM: x86/mmu: Zap any compound page when collapsing sptes KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch) ... -
Pierre Morel authored
Local IRQs are reset by a normal cpu reset. The initial cpu reset and the clear cpu reset, as superset of the normal reset, both clear the IRQs too. Let's inject an interrupt to a vCPU before calling a reset and see if it is gone after the reset. We choose to inject only an emergency interrupt at this point and can extend the test to other types of IRQs later. Signed-off-by:
Pierre Morel <pmorel@linux.ibm.com> Signed-off-by:
Janosch Frank <frankja@linux.ibm.com> [minor fixups] Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20200131100205.74720-7-frankja@linux.ibm.comSigned-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Janosch Frank authored
Test if the registers end up having the correct values after a normal, initial and clear reset. Signed-off-by:
-
Janosch Frank authored
Add library access to more registers. Signed-off-by:
-
Janosch Frank authored
The architecture states that we need to reset local IRQs for all CPU resets. Because the old reset interface did not support the normal CPU reset we never did that on a normal reset. Let's implement an interface for the missing normal and clear resets and reset all local IRQs, registers and control structures as stated in the architecture. Userspace might already reset the registers via the vcpu run struct, but as we need the interface for the interrupt clearing part anyway, we implement the resets fully and don't rely on userspace to reset the rest. Signed-off-by:
-
Janosch Frank authored
The code seems to be quite old and uses lots of unneeded spaces for alignment, which doesn't really help with readability. Let's: * Get rid of the extra spaces * Remove the ULs as they are not needed on 0s * Define constants for the CR 0 and 14 initial values * Use the sizeof of the gcr array to memset it to 0 Signed-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
-
Christian Borntraeger authored
The initial CPU reset clobbers the userspace fpc and the store status ioctl clobbers the guest acrs + fpr. As these calls are only done via ioctl (and not via vcpu_run), no CPU context is loaded, so we can (and must) act directly on the sync regs, not on the thread context. Cc: stable@kernel.org Fixes: e1788bb9 ("KVM: s390: handle floating point registers in the run ioctl not in vcpu_put/load") Fixes: 31d8b8d4 ("KVM: s390: handle access registers in the run ioctl not in vcpu_put/load") Signed-off-by:
-
