Although when a process terminates, the kernel will removes memory
associated with that process, It's neither good style nor proper design to
leave it to kernel.  This patch free allocated memory before process exit.

Link: https://lkml.kernel.org/r/20221219164917.14132-1-iecedge@gmail.comSigned-off-by: Jianlin Lv <iecedge@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

As Hardware Tag-Based KASAN is intended to be used in production, its
performance impact is crucial.  As page_alloc allocations tend to be big,
tagging and checking all such allocations can introduce a significant
slowdown.

Add two new boot parameters that allow to alleviate that slowdown:

- kasan.page_alloc.sample, which makes Hardware Tag-Based KASAN tag only
  every Nth page_alloc allocation with the order configured by the second
  added parameter (default: tag every such allocation).

- kasan.page_alloc.sample.order, which makes sampling enabled by the first
  parameter only affect page_alloc allocations with the order equal or
  greater than the specified value (default: 3, see below).

The exact performance improvement caused by using the new parameters
depends on their values and the applied workload.

The chosen default value for kasan.page_alloc.sample.order is 3, which
matches both PAGE_ALLOC_COSTLY_ORDER and SKB_FRAG_PAGE_ORDER.  This is
done for two reasons:

1. PAGE_ALLOC_COSTLY_ORDER is "the order at which allocations are deemed
   costly to service", which corresponds to the idea that only large and
   thus costly allocations are supposed to sampled.

2. One of the workloads targeted by this patch is a benchmark that sends
   a large amount of data over a local loopback connection. Most multi-page
   data allocations in the networking subsystem have the order of
   SKB_FRAG_PAGE_ORDER (or PAGE_ALLOC_COSTLY_ORDER).

When running a local loopback test on a testing MTE-enabled device in sync
mode, enabling Hardware Tag-Based KASAN introduces a ~50% slowdown. 
Applying this patch and setting kasan.page_alloc.sampling to a value
higher than 1 allows to lower the slowdown.  The performance improvement
saturates around the sampling interval value of 10 with the default
sampling page order of 3.  This lowers the slowdown to ~20%.  The slowdown
in real scenarios involving the network will likely be better.

Enabling page_alloc sampling has a downside: KASAN misses bad accesses to
a page_alloc allocation that has not been tagged.  This lowers the value
of KASAN as a security mitigation.

However, based on measuring the number of page_alloc allocations of
different orders during boot in a test build, sampling with the default
kasan.page_alloc.sample.order value affects only ~7% of allocations.  The
rest ~93% of allocations are still checked deterministically.

Link: https://lkml.kernel.org/r/129da0614123bb85ed4dd61ae30842b2dd7c903f.1671471846.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mark Brand <markbrand@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

All its callers either already hold a reference to, or lock the swap
device while calling this function.  There is only one exception in
shmem_swapin_folio, just make this caller also hold a reference of the
swap device, so this helper can be simplified and saves a few cycles.

This also provides finer control of error handling in shmem_swapin_folio,
on race (with swap off), it can just try again.  For invalid swap entry,
it can fail with a proper error code.

Link: https://lkml.kernel.org/r/20221219185840.25441-5-ryncsn@gmail.comSigned-off-by: Kairui Song <kasong@tencent.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This makes the code cleaner.  This helper is made of only two line of self
explanational code and not reused anywhere else.

And this actually make the compiled object smaller by a bit.

bloat-o-meter results on x86_64 of mm/swap_state.o:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-35 (-35)
Function                                     old     new   delta
swap_ra_info.constprop                       512     477     -35
Total: Before=8388, After=8353, chg -0.42%

Link: https://lkml.kernel.org/r/20221219185840.25441-4-ryncsn@gmail.comSigned-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Avoid a redundant pte map/unmap when swap readahead window is 1.

Link: https://lkml.kernel.org/r/20221219185840.25441-3-ryncsn@gmail.comSigned-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Clean up and fixes for swap", v2.

This series cleans up some code paths, saves a few cycles and reduces the
object size by a bit.  It also fixes some rare race issue with statistics.


This patch (of 4):

Convert a volatile variable to more readable READ_ONCE.  And this actually
avoids the code from reading the variable twice redundantly when it races.

Link: https://lkml.kernel.org/r/20221219185840.25441-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20221219185840.25441-2-ryncsn@gmail.comSigned-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Document newly added DAMON sysfs interface files for DAMOS filtering on
the DAMON ABI document.

Link: https://lkml.kernel.org/r/20221205230830.144349-12-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Document about the newly added files for DAMOS filters on the DAMON usage
document.

Link: https://lkml.kernel.org/r/20221205230830.144349-11-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add simple test cases for scheme filters of DAMON sysfs interface.  The
test cases check if the files are populated as expected, receives some
valid inputs, and refuses some invalid inputs.

Link: https://lkml.kernel.org/r/20221205230830.144349-10-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Implement scheme filters functionality of DAMON sysfs interface by making
the code reads the values of files under the filter directories and pass
that to DAMON using DAMON kernel API.

[sj@kernel.org: fix leaking a filter for wrong cgroup path]
  Link: https://lkml.kernel.org/r/20221219171807.55708-2-sj@kernel.org
[sj@kernel.org: return an error for filter memcg path id lookup failure]
  Link: https://lkml.kernel.org/r/20221219171807.55708-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20221205230830.144349-9-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Implement 'nr_filters' file under 'filters' directory, which will be used
to populate specific number of 'filter' directory under the directory,
similar to other 'nr_*' files in DAMON sysfs interface.

Link: https://lkml.kernel.org/r/20221205230830.144349-8-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Implement DAMOS filter directory which will be located under the filters
directory.  The directory provides three files, namely type, matching, and
memcg_path.  'type' and 'matching' will be directly connected to the
fields of 'struct damos_filter' having same name.  'memcg_path' will
receive the path of the memory cgroup of the interest and later converted
to memcg id when it's committed.

Link: https://lkml.kernel.org/r/20221205230830.144349-7-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

DAMOS filters are currently supported by only DAMON kernel API.  To expose
the feature to user space, implement a DAMON sysfs directory named
'filters' under each scheme directory.  Please note that this is
implementing only the directory.  Following commits will implement more
files and directories, and finally connect the DAMOS filters feature.

Link: https://lkml.kernel.org/r/20221205230830.144349-6-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Document the newly added 'skip_anon' parameter of DAMON_RECLAIM, which can
be used to avoid anonymous pages reclamation.

Link: https://lkml.kernel.org/r/20221205230830.144349-5-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In some cases, for example if users have confidence at anonymous pages
management or the swap device is too slow, users would want to avoid
DAMON_RECLAIM swapping the anonymous pages out.  For such case, add yet
another DAMON_RECLAIM parameter, namely 'skip_anon'.  When it is set as
'Y', DAMON_RECLAIM will avoid reclaiming anonymous pages using a DAMOS
filter.

Link: https://lkml.kernel.org/r/20221205230830.144349-4-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Implement support of the DAMOS filters in the physical address space
monitoring operations set, for all DAMOS actions that it supports
including 'pageout', 'lru_prio', and 'lru_deprio'.

Link: https://lkml.kernel.org/r/20221205230830.144349-3-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "implement DAMOS filtering for anon pages and/or specific
memory cgroups"

DAMOS let users do system operations in a data access pattern oriented
way.  The data access pattern, which is extracted by DAMON, is somewhat
accurate more than what user space could know in many cases.  However, in
some situation, users could know something more than the kernel about the
pattern or some special requirements for some types of memory or
processes.  For example, some users would have slow swap devices and knows
latency-ciritical processes and therefore want to use DAMON-based
proactive reclamation (DAMON_RECLAIM) for only non-anonymous pages of
non-latency-critical processes.

For such restriction, users could exclude the memory regions from the
initial monitoring regions and use non-dynamic monitoring regions update
monitoring operations set including fvaddr and paddr.  They could also
adjust the DAMOS target access pattern.  For dynamically changing memory
layout and access pattern, those would be not enough.

To help the case, add an interface, namely DAMOS filters, which can be
used to avoid the DAMOS actions be applied to specific types of memory, to
DAMON kernel API (damon.h).  At the moment, it supports filtering
anonymous pages and/or specific memory cgroups in or out for each DAMOS
scheme.

This patchset adds the support for all DAMOS actions that 'paddr'
monitoring operations set supports ('pageout', 'lru_prio', and
'lru_deprio'), and the functionality is exposed via DAMON kernel API
(damon.h) the DAMON sysfs interface (/sys/kernel/mm/damon/admins/), and
DAMON_RECLAIM module parameters.

Patches Sequence
----------------

First patch implements DAMOS filter interface to DAMON kernel API.  Second
patch makes the physical address space monitoring operations set to
support the filters from all supporting DAMOS actions.  Third patch adds
anonymous pages filter support to DAMON_RECLAIM, and the fourth patch
documents the DAMON_RECLAIM's new feature.  Fifth to seventh patches
implement DAMON sysfs files for support of the filters, and eighth patch
connects the file to use DAMOS filters feature.  Ninth patch adds simple
self test cases for DAMOS filters of the sysfs interface.  Finally,
following two patches (tenth and eleventh) document the new features and
interfaces.


This patch (of 11):

DAMOS lets users do system operation in a data access pattern oriented
way.  The data access pattern, which is extracted by DAMON, is somewhat
accurate more than what user space could know in many cases.  However, in
some situation, users could know something more than the kernel about the
pattern or some special requirements for some types of memory or
processes.  For example, some users would have slow swap devices and knows
latency-ciritical processes and therefore want to use DAMON-based
proactive reclamation (DAMON_RECLAIM) for only non-anonymous pages of
non-latency-critical processes.

For such restriction, users could exclude the memory regions from the
initial monitoring regions and use non-dynamic monitoring regions update
monitoring operations set including fvaddr and paddr.  They could also
adjust the DAMOS target access pattern.  For dynamically changing memory
layout and access pattern, those would be not enough.

To help the case, add an interface, namely DAMOS filters, which can be
used to avoid the DAMOS actions be applied to specific types of memory, to
DAMON kernel API (damon.h).  At the moment, it supports filtering
anonymous pages and/or specific memory cgroups in or out for each DAMOS
scheme.

Note that this commit adds only the interface to the DAMON kernel API. 
The impelmentation should be made in the monitoring operations sets, and
following commits will add that.

Link: https://lkml.kernel.org/r/20221205230830.144349-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20221205230830.144349-2-sj@kernel.orgSigned-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Charge moving mode in cgroup1 allows memory to follow tasks as they
migrate between cgroups.  This is, and always has been, a questionable
thing to do - for several reasons.

First, it's expensive.  Pages need to be identified, locked and isolated
from various MM operations, and reassigned, one by one.

Second, it's unreliable.  Once pages are charged to a cgroup, there isn't
always a clear owner task anymore.  Cache isn't moved at all, for example.
Mapped memory is moved - but if trylocking or isolating a page fails,
it's arbitrarily left behind.  Frequent moving between domains may leave a
task's memory scattered all over the place.

Third, it isn't really needed.  Launcher tasks can kick off workload tasks
directly in their target cgroup.  Using dedicated per-workload groups
allows fine-grained policy adjustments - no need to move tasks and their
physical pages between control domains.  The feature was never
forward-ported to cgroup2, and it hasn't been missed.

Despite it being a niche usecase, the maintenance overhead of supporting
it is enormous.  Because pages are moved while they are live and subject
to various MM operations, the synchronization rules are complicated. 
There are lock_page_memcg() in MM and FS code, which non-cgroup people
don't understand.  In some cases we've been able to shift code and cgroup
API calls around such that we can rely on native locking as much as
possible.  But that's fragile, and sometimes we need to hold MM locks for
longer than we otherwise would (pte lock e.g.).

Mark the feature deprecated. Hopefully we can remove it soon.

And backport into -stable kernels so that people who develop against
earlier kernels are warned about this deprecation as early as possible.

[akpm@linux-foundation.org: fix memory.rst underlining]
Link: https://lkml.kernel.org/r/Y5COd+qXwk/S+n8N@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The previous patch made sure charge moving only touches pages for which
page_mapped() is stable.  lock_page_memcg() is no longer needed.

Link: https://lkml.kernel.org/r/20221206171340.139790-3-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "mm: push down lock_page_memcg()", v2.


This patch (of 3):

During charge moving, the pte lock and the page lock cover nearly all
cases of stabilizing page_mapped().  The only exception is when we're
looking at a non-present pte and find a page in the page cache or in the
swapcache: if the page is mapped elsewhere, it can become unmapped outside
of our control.  For this reason, rmap needs lock_page_memcg().

We don't like cgroup-specific locks in generic MM code - especially in
performance-critical MM code - and for a legacy feature that's unlikely to
have many users left - if any.

So remove the exception.  Arguably that's better semantics anyway: the
page is shared, and another process seems to be the more active user.

Once we stop moving such pages, rmap doesn't need lock_page_memcg()
anymore.  The next patch will remove it.

Link: https://lkml.kernel.org/r/20221206171340.139790-1-hannes@cmpxchg.org
Link: https://lkml.kernel.org/r/20221206171340.139790-2-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

With the gcc 'maybe-uninitialized' warning enabled, gcc will produce:

  mm/hugetlb.c:6896:20: warning: `chg' may be used uninitialized

This is a false positive, but may be difficult for the compiler to
determine.  maybe-uninitialized is disabled by default, but this gets
flagged as a 0-DAY build regression.

Initialize the variable to silence the warning.

Link: https://lkml.kernel.org/r/20221216224507.106789-1-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mark_page_lazyfree() and the callers are converted to use folio, this
rename and make it to take in a folio argument instead of calling
page_folio().

Link: https://lkml.kernel.org/r/20221209020618.190306-1-wangkefeng.wang@huawei.comSigned-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Using folios instead of pages removes several calls to compound_head(),

Link: https://lkml.kernel.org/r/20221207023431.151008-1-wangkefeng.wang@huawei.comSigned-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The result of the allocation attempt is not printed in
trace_cma_alloc_finish, but it's important to do it so we can set filters
to catch specific errors on allocation or to trigger some operations on
specific errors.

We have printed the result in log, but the log is conditional and could
not be filtered by tracing events.

It introduces little overhead to print this result.  The result of
allocation is named `errorno' in the trace.

Link: https://lkml.kernel.org/r/20221208142130.1501195-1-haowenchao@huawei.comSigned-off-by: Wenchao Hao <haowenchao@huawei.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add a parameter `use_huge' for fix_size_alloc_test(), which can be used to
test allocation vie vmalloc_huge for both functionality and performance.

Link: https://lkml.kernel.org/r/20221212055657.698420-1-panqinglin2020@iscas.ac.cnSigned-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

set_mempolicy_home_node tries to duplicate a memory policy before checking
it whether it is applicable for the operation.  There is no real reason
for doing that and it might actually be a pointless memory allocation and
deallocation exercise for MPOL_INTERLEAVE.

Not a big problem but we can do better. Simply check the policy before
acting on it.

Link: https://lkml.kernel.org/r/20221216194537.238047-2-mathieu.desnoyers@efficios.comSigned-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove this conversion of a folio back to a page.

Link: https://lkml.kernel.org/r/20221215214402.3522366-13-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

These places just use b_page to get to the buffer's address_space or call
page_folio() on b_page to get a folio.

Link: https://lkml.kernel.org/r/20221215214402.3522366-12-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

These places just use b_page to get to the buffer's address_space or the
index of the page the buffer is in.

Link: https://lkml.kernel.org/r/20221215214402.3522366-11-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

These places just use b_page to get to the buffer's address_space or have
already been converted to folio.

Link: https://lkml.kernel.org/r/20221215214402.3522366-10-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

These places just use b_page to get to the buffer's address_space.

Link: https://lkml.kernel.org/r/20221215214402.3522366-9-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Removes about four calls to compound_head().  Two of them are inline which
removes 132 bytes from the kernel text.

Link: https://lkml.kernel.org/r/20221215214402.3522366-8-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

page_io never uses buffer_heads to do I/O.

Link: https://lkml.kernel.org/r/20221215214402.3522366-7-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Save 76 bytes from avoiding the call to compound_head() in SetPageError().
Also avoid the call to compound_head() in end_page_writeback().

Link: https://lkml.kernel.org/r/20221215214402.3522366-6-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Removes a call to compound_head() in SetPageError(), saving 76 bytes of
text.

Link: https://lkml.kernel.org/r/20221215214402.3522366-5-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Removes a call to compound_head() in this path.

Link: https://lkml.kernel.org/r/20221215214402.3522366-4-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

These cases just check if it's NULL, or use b_page to get to the page's
address space.  They are assumptions that b_page never points to a tail
page.

Link: https://lkml.kernel.org/r/20221215214402.3522366-3-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Start converting buffer_heads to use folios".

I was hoping that filesystems would convert from buffer_heads to iomap,
but that's not happening particularly quickly.  So the buffer_head
infrastructure needs to be converted from being page-based to being
folio-based.


This patch (of 12):

Buffer heads point to the allocation (ie the folio), not the page.  This
is currently the same thing for all filesystems that use buffer heads, so
this is a safe transitional step.

Link: https://lkml.kernel.org/r/20221215214402.3522366-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20221215214402.3522366-2-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

huge_pte_offset() is the main walker function for hugetlb pgtables.  The
name is not really representing what it does, though.

Instead of renaming it, introduce a wrapper function called hugetlb_walk()
which will use huge_pte_offset() inside.  Assert on the locks when walking
the pgtable.

Note, the vma lock assertion will be a no-op for private mappings.

Document the last special case in the page_vma_mapped_walk() path where we
don't need any more lock to call hugetlb_walk().

Taking vma lock there is not needed because either: (1) potential callers
of hugetlb pvmw holds i_mmap_rwsem already (from one rmap_walk()), or (2)
the caller will not walk a hugetlb vma at all so the hugetlb code path not
reachable (e.g.  in ksm or uprobe paths).

It's slightly implicit for future page_vma_mapped_walk() callers on that
lock requirement.  But anyway, when one day this rule breaks, one will get
a straightforward warning in hugetlb_walk() with lockdep, then there'll be
a way out.

[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20221216155229.2043750-1-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Since walk_hugetlb_range() walks the pgtable, it needs the vma lock to
make sure the pgtable page will not be freed concurrently.

Link: https://lkml.kernel.org/r/20221216155226.2043738-1-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>