- 11 Feb, 2020 40 commits
-
-
Linus Walleij authored
commit af3ed119 upstream. The code in mmc_spi_initsequence() tries to send a burst with high chipselect and for this reason hardcodes the device into SPI_CS_HIGH. This is not good because the SPI_CS_HIGH flag indicates logical "asserted" CS not always the physical level. In some cases the signal is inverted in the GPIO library and in that case SPI_CS_HIGH is already set, and enforcing SPI_CS_HIGH again will actually drive it low. Instead of hard-coding this, toggle the polarity so if the default is LOW it goes high to assert chipselect but if it is already high then toggle it low instead. Cc: Phil Elwell <phil@raspberrypi.org> Reported-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Engraf authored
commit 88519914 upstream. pm_runtime_get_sync() returns the device's usage counter. This might be >0 if the device is already powered up or CONFIG_PM is disabled. Abort probe function on real error only. Fixes: da76ba50 ("PCI: tegra: Add power management support") Link: https://lore.kernel.org/r/20191216111825.28136-1-david.engraf@sysgo.comSigned-off-by:
David Engraf <david.engraf@sysgo.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Andrew Murray <andrew.murray@arm.com> Cc: stable@vger.kernel.org # v4.17+ Signed-off-by:
-
Steve French authored
[ Upstream commit 46f17d17 ] Code cleanup in the 5.1 kernel changed the array passed into signing verification on large reads leading to warning messages being logged when copying files to local systems from remote. SMB signature verification returned error = -5 This changeset fixes verification of SMB3 signatures of large reads. Suggested-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pingfan Liu authored
commit fbee6ba2 upstream. In lmb_is_removable(), if a section is not present, it should continue to test the rest of the sections in the block. But the current code fails to do so. Fixes: 51925fb3 ("powerpc/pseries: Implement memory hotplug remove in the kernel") Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
Pingfan Liu <kernelfans@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1578632042-12415-1-git-send-email-kernelfans@gmail.comSigned-off-by:
-
Sukadev Bhattiprolu authored
commit c2a20711 upstream. ASDR is HV-privileged and must only be accessed in HV-mode. Fixes a Program Check (0x700) when xmon in a VM dumps SPRs. Fixes: d1e1b351 ("powerpc/xmon: Add ISA v3.0 SPRs to SPR dump") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Gerald Schaefer authored
commit 5f490a52 upstream. Commit ee71d16d ("s390/mm: make TASK_SIZE independent from the number of page table levels") changed the logic of TASK_SIZE and also removed the arch_mmap_check() implementation for s390. This combination has a subtle effect on how get_unmapped_area() for hugetlbfs pages works. It is now possible that a user process establishes a hugetlbfs mapping at an address above 4 TB, without triggering a dynamic pagetable upgrade from 3 to 4 levels. This is because hugetlbfs mappings will not use mm->get_unmapped_area, but rather file->f_op->get_unmapped_area, which currently is the generic implementation of hugetlb_get_unmapped_area() that does not know about s390 dynamic pagetable upgrades, but with the new definition of TASK_SIZE, it will now allow mappings above 4 TB. Subsequent access to such a mapped address above 4 TB will result in a page fault loop, because the CPU cannot translate such a large address with 3 pagetable levels. The fault handler will try to map in a hugepage at the address, but due to the folded pagetable logic it will end up with creating entries in the 3 level pagetable, possibly overwriting existing mappings, and then it all repeats when the access is retried. Apart from the page fault loop, this can have various nasty effects, e.g. kernel panic from one of the BUG_ON() checks in memory management code, or even data loss if an existing mapping gets overwritten. Fix this by implementing HAVE_ARCH_HUGETLB_UNMAPPED_AREA support for s390, providing an s390 version for hugetlb_get_unmapped_area() with pagetable upgrade support similar to arch_get_unmapped_area(), which will then be used instead of the generic version. Fixes: ee71d16d ("s390/mm: make TASK_SIZE independent from the number of page table levels") Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Alexander Lobakin authored
commit 16202c09 upstream. Commit 92b34a97 ("MIPS: boot: add missing targets for vmlinux.*.its") fixed constant rebuild of *.its files on every make invocation, but due to typo ("lzmo") it made no sense for vmlinux.lzma.its. Fixes: 92b34a97 ("MIPS: boot: add missing targets for vmlinux.*.its") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Alexander Lobakin <alobakin@dlink.ru> [paulburton@kernel.org: s/invokation/invocation/] Signed-off-by:
Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Alexander Lobakin authored
commit a5399880 upstream. quiet_cmd_relocs lacks a whitespace which results in: LD vmlinux SORTEX vmlinux SYSMAP System.map RELOCS vmlinux Building modules, stage 2. MODPOST 64 modules After this patch: LD vmlinux SORTEX vmlinux SYSMAP System.map RELOCS vmlinux Building modules, stage 2. MODPOST 64 modules Typo is present in kernel tree since the introduction of relocatable kernel support in commit e818fac5 ("MIPS: Generate relocation table when CONFIG_RELOCATABLE"), but the relocation scripts were moved to Makefile.postlink later with commit 44079d35 ("MIPS: Use Makefile.postlink to insert relocations into vmlinux"). Fixes: 44079d35 ("MIPS: Use Makefile.postlink to insert relocations into vmlinux") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by:
-
Christoffer Dall authored
commit b6ae256a upstream. On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit register, and we should only sign extend the register up to the width of the register as specified in the operation (by using the 32-bit Wn or 64-bit Xn register specifier). As it turns out, the architecture provides this decoding information in the SF ("Sixty-Four" -- how cute...) bit. Let's take advantage of this with the usual 32-bit/64-bit header file dance and do the right thing on AArch64 hosts. Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.comSigned-off-by:
-
Mark Rutland authored
commit 1cfbb484 upstream. Confusingly, there are three SPSR layouts that a kernel may need to deal with: (1) An AArch64 SPSR_ELx view of an AArch64 pstate (2) An AArch64 SPSR_ELx view of an AArch32 pstate (3) An AArch32 SPSR_* view of an AArch32 pstate When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either dealing with #2 or #3 consistently. On arm64 the PSR_AA32_* definitions match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions match the AArch32 SPSR_* view. However, when we inject an exception into an AArch32 guest, we have to synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64 host needs to synthesize layout #3 from layout #2. This patch adds a new host_spsr_to_spsr32() helper for this, and makes use of it in the KVM AArch32 support code. For arm64 we need to shuffle the DIT bit around, and remove the SS bit, while for arm we can use the value as-is. I've open-coded the bit manipulation for now to avoid having to rework the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_* definitions. I hope to perform a more thorough refactoring in future so that we can handle pstate view manipulation more consistently across the kernel tree. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Alexandru Elisei <alexandru.elisei@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200108134324.46500-4-mark.rutland@arm.comSigned-off-by:
-
Mark Rutland authored
commit 3c2483f1 upstream. When KVM injects an exception into a guest, it generates the CPSR value from scratch, configuring CPSR.{M,A,I,T,E}, and setting all other bits to zero. This isn't correct, as the architecture specifies that some CPSR bits are (conditionally) cleared or set upon an exception, and others are unchanged from the original context. This patch adds logic to match the architectural behaviour. To make this simple to follow/audit/extend, documentation references are provided, and bits are configured in order of their layout in SPSR_EL2. This layout can be seen in the diagram on ARM DDI 0487E.a page C5-426. Note that this code is used by both arm and arm64, and is intended to fuction with the SPSR_EL2 and SPSR_HYP layouts. Signed-off-by:
-
Mark Rutland authored
commit a425372e upstream. When KVM injects an exception into a guest, it generates the PSTATE value from scratch, configuring PSTATE.{M[4:0],DAIF}, and setting all other bits to zero. This isn't correct, as the architecture specifies that some PSTATE bits are (conditionally) cleared or set upon an exception, and others are unchanged from the original context. This patch adds logic to match the architectural behaviour. To make this simple to follow/audit/extend, documentation references are provided, and bits are configured in order of their layout in SPSR_EL2. This layout can be seen in the diagram on ARM DDI 0487E.a page C5-429. Signed-off-by:
-
Hans de Goede authored
commit d8feb608 upstream. Using HDA power-saving on the Clevo W65_67SB causes the first 0.5 seconds of audio to be missing every time audio starts playing. This commit adds the Clevo W65_67SB the power_save blacklist to avoid this issue. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200125181021.70446-1-hdegoede@redhat.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mika Westerberg authored
commit e48b72a5 upstream. Currently the driver has disabled interrupt support for Tangier but actually interrupt works just fine if the command is not written twice in a row. Also we need to ack the interrupt in the handler. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Kevin Hao authored
commit 0f394dae upstream. Fix a memory leak reported by kmemleak: unreferenced object 0xffff000bc6f50e80 (size 128): comm "kworker/23:2", pid 201, jiffies 4294894947 (age 942.132s) hex dump (first 32 bytes): 00 00 00 00 41 00 00 00 86 c0 03 00 00 00 00 00 ....A........... 00 a0 b2 c6 0b 00 ff ff 40 51 fd 10 00 80 ff ff ........@Q...... backtrace: [<00000000e62d2240>] kmem_cache_alloc_trace+0x1a4/0x320 [<00000000279143c9>] irq_domain_push_irq+0x7c/0x188 [<00000000d9f4c154>] thunderx_gpio_probe+0x3ac/0x438 [<00000000fd09ec22>] pci_device_probe+0xe4/0x198 [<00000000d43eca75>] really_probe+0xdc/0x320 [<00000000d3ebab09>] driver_probe_device+0x5c/0xf0 [<000000005b3ecaa0>] __device_attach_driver+0x88/0xc0 [<000000004e5915f5>] bus_for_each_drv+0x7c/0xc8 [<0000000079d4db41>] __device_attach+0xe4/0x140 [<00000000883bbda9>] device_initial_probe+0x18/0x20 [<000000003be59ef6>] bus_probe_device+0x98/0xa0 [<0000000039b03d3f>] deferred_probe_work_func+0x74/0xa8 [<00000000870934ce>] process_one_work+0x1c8/0x470 [<00000000e3cce570>] worker_thread+0x1f8/0x428 [<000000005d64975e>] kthread+0xfc/0x128 [<00000000f0eaa764>] ret_from_fork+0x10/0x18 Fixes: 495c38d3 ("irqdomain: Add irq_domain_{push,pop}_irq() functions") Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 3e21d9a5 upstream. In case memory resources for _ptr2_ were allocated, release them before return. Notice that in case _ptr1_ happens to be NULL, krealloc() behaves exactly like kmalloc(). Addresses-Coverity-ID: 1490594 ("Resource leak") Link: http://lkml.kernel.org/r/20200123160115.GA4202@embeddedor Fixes: 3f15801c ("lib: add kasan test module") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Helen Koike authored
commit f51e50db upstream. boundary->width and boundary->height are sizes relative to boundary->left and boundary->top coordinates, but they were not being taken into consideration to adjust r->left and r->top, leading to the following error: Consider the follow as initial values for boundary and r: struct v4l2_rect boundary = { .left = 100, .top = 100, .width = 800, .height = 600, } struct v4l2_rect r = { .left = 0, .top = 0, .width = 1920, .height = 960, } calling v4l2_rect_map_inside(&r, &boundary) was modifying r to: r = { .left = 0, .top = 0, .width = 800, .height = 600, } Which is wrongly outside the boundary rectangle, because: v4l2_rect_set_max_size(r, boundary); // r->width = 800, r->height = 600 ... if (r->left + r->width > boundary->width) // true r->left = boundary->width - r->width; // r->left = 800 - 800 if (r->top + r->height > boundary->height) // true r->top = boundary->height - r->height; // r->height = 600 - 600 Fix this by considering top/left coordinates from boundary. Fixes: ac49de8c ("[media] v4l2-rect.h: new header with struct v4l2_rect helper functions") Signed-off-by:
Helen Koike <helen.koike@collabora.com> Cc: <stable@vger.kernel.org> # for v4.7 and up Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 4a873f3f upstream. The do_video_ioctl() compat handler converts the compat command codes into the native ones before processing further, but this causes problems for 32-bit user applications that pass a command code that matches a 64-bit native number, which will then be handled the same way. Specifically, this breaks VIDIOC_DQEVENT_TIME from user space applications with 64-bit time_t, as the structure layout is the same as the native 64-bit layout on many architectures (x86 being the notable exception). Change the handler to use the converted command code only for passing into the native ioctl handler, not for deciding on the conversion, in order to make the compat behavior match the native behavior. Actual support for the 64-bit time_t version of VIDIOC_DQEVENT_TIME and other commands still needs to be added in a separate patch. Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
John Hubbard authored
commit 3c7470b6 upstream. After DMA is complete, and the device and CPU caches are synchronized, it's still required to mark the CPU pages as dirty, if the data was coming from the device. However, this driver was just issuing a bare put_page() call, without any set_page_dirty*() call. Fix the problem, by calling set_page_dirty_lock() if the CPU pages were potentially receiving data from the device. Link: http://lkml.kernel.org/r/20200107224558.2362728-11-jhubbard@nvidia.comSigned-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
Yang Shi authored
commit 5984fabb upstream. Since commit a49bd4d7 ("mm, numa: rework do_pages_move"), the semantic of move_pages() has changed to return the number of non-migrated pages if they were result of a non-fatal reasons (usually a busy page). This was an unintentional change that hasn't been noticed except for LTP tests which checked for the documented behavior. There are two ways to go around this change. We can even get back to the original behavior and return -EAGAIN whenever migrate_pages is not able to migrate pages due to non-fatal reasons. Another option would be to simply continue with the changed semantic and extend move_pages documentation to clarify that -errno is returned on an invalid input or when migration simply cannot succeed (e.g. -ENOMEM, -EBUSY) or the number of pages that couldn't have been migrated due to ephemeral reasons (e.g. page is pinned or locked for other reasons). This patch implements the second option because this behavior is in place for some time without anybody complaining and possibly new users depending on it. Also it allows to have a slightly easier error handling as the caller knows that it is worth to retry when err > 0. But since the new semantic would be aborted immediately if migration is failed due to ephemeral reasons, need include the number of non-attempted pages in the return value too. Link: http://lkml.kernel.org/r/1580160527-109104-1-git-send-email-yang.shi@linux.alibaba.com Fixes: a49bd4d7 ("mm, numa: rework do_pages_move") Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Suggested-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Wei Yang <richardw.yang@linux.intel.com> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by:
-
Dan Williams authored
commit f1037ec0 upstream. The daxctl unit test for the dax_kmem driver currently triggers the (false positive) lockdep splat below. It results from the fact that remove_memory_block_devices() is invoked under the mem_hotplug_lock() causing lockdep entanglements with cpu_hotplug_lock() and sysfs (kernfs active state tracking). It is a false positive because the sysfs attribute path triggering the memory remove is not the same attribute path associated with memory-block device. sysfs_break_active_protection() is not applicable since there is no real deadlock conflict, instead move memory-block device removal outside the lock. The mem_hotplug_lock() is not needed to synchronize the memory-block device removal vs the page online state, that is already handled by lock_device_hotplug(). Specifically, lock_device_hotplug() is sufficient to allow try_remove_memory() to check the offline state of the memblocks and be assured that any in progress online attempts are flushed / blocked by kernfs_drain() / attribute removal. The add_memory() path safely creates memblock devices under the mem_hotplug_lock(). There is no kernfs active state synchronization in the memblock device_register() path, so nothing to fix there. This change is only possible thanks to the recent change that refactored memory block device removal out of arch_remove_memory() (commit 4c4b7f9b "mm/memory_hotplug: remove memory block devices before arch_remove_memory()"), and David's due diligence tracking down the guarantees afforded by kernfs_drain(). Not flagged for -stable since this only impacts ongoing development and lockdep validation, not a runtime issue. ====================================================== WARNING: possible circular locking dependency detected 5.5.0-rc3+ #230 Tainted: G OE ------------------------------------------------------ lt-daxctl/6459 is trying to acquire lock: ffff99c7f0003510 (kn->count#241){++++}, at: kernfs_remove_by_name_ns+0x41/0x80 but task is already holding lock: ffffffffa76a5450 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x20/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (mem_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 get_online_mems+0x3e/0xb0 kmem_cache_create_usercopy+0x2e/0x260 kmem_cache_create+0x12/0x20 ptlock_cache_init+0x20/0x28 start_kernel+0x243/0x547 secondary_startup_64+0xb6/0xc0 -> #1 (cpu_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 cpus_read_lock+0x3e/0xb0 online_pages+0x37/0x300 memory_subsys_online+0x17d/0x1c0 device_online+0x60/0x80 state_store+0x65/0xd0 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#241){++++}: check_prev_add+0x98/0xa40 validate_chain+0x576/0x860 __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 __kernfs_remove+0x25f/0x2e0 kernfs_remove_by_name_ns+0x41/0x80 remove_files.isra.0+0x30/0x70 sysfs_remove_group+0x3d/0x80 sysfs_remove_groups+0x29/0x40 device_remove_attrs+0x39/0x70 device_del+0x16a/0x3f0 device_unregister+0x16/0x60 remove_memory_block_devices+0x82/0xb0 try_remove_memory+0xb5/0x130 remove_memory+0x26/0x40 dev_dax_kmem_remove+0x44/0x6a [kmem] device_release_driver_internal+0xe4/0x1c0 unbind_store+0xef/0x120 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: kn->count#241 --> cpu_hotplug_lock.rw_sem --> mem_hotplug_lock.rw_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(mem_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); lock(mem_hotplug_lock.rw_sem); lock(kn->count#241); *** DEADLOCK *** No fixes tag as this has been a long standing issue that predated the addition of kernfs lockdep annotations. Link: http://lkml.kernel.org/r/157991441887.2763922.4770790047389427325.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
David Hildenbrand <david@redhat.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 2acf25f1 upstream. The loop termination for iterating over all formats should contain SNDRV_PCM_FORMAT_LAST, not less than it. Fixes: 9b151fec ("ALSA: dummy - Add debug proc file") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200201080530.22390-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit f8e5f90b upstream. I overlooked that some fields are words and need the converts from LE in the recently added USB descriptor validation code. This patch fixes those with the proper macro usages. Fixes: 57f87706 ("ALSA: usb-audio: More validations of descriptor units") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200201080530.22390-1-tiwai@suse.deSigned-off-by:
-
Bryan O'Donoghue authored
commit d710562e upstream. Currently ecm->notify_req is used to flag when a request is in-flight. ecm->notify_req is set to NULL and when a request completes it is subsequently reset. This is fundamentally buggy in that the unbind logic of the ECM driver will unconditionally free ecm->notify_req leading to a NULL pointer dereference. Fixes: da741b8c ("usb ethernet gadget: split CDC Ethernet function") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Bryan O'Donoghue authored
commit 5b24c28c upstream. Currently ncm->notify_req is used to flag when a request is in-flight. ncm->notify_req is set to NULL and when a request completes it is subsequently reset. This is fundamentally buggy in that the unbind logic of the NCM driver will unconditionally free ncm->notify_req leading to a NULL pointer dereference. Fixes: 40d133d7 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Roger Quadros authored
commit 463f67ae upstream. These interfaces do support super-speed so let's not limit maximum speed to high-speed. Cc: <stable@vger.kernel.org> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Jun Li authored
commit 3ba76256 upstream. This is to prevent any possible events generated while unregister tpcm port. Fixes: 74e656d6 ("staging: typec: Type-C Port Controller Interface driver (tcpci)") Signed-off-by:
Li Jun <jun.li@nxp.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1579502333-4145-1-git-send-email-jun.li@nxp.comSigned-off-by:
-
Navid Emamdoost authored
commit 4282dc05 upstream. In the implementation of brcmf_usbdev_qinit() the allocated memory for reqs is leaking if usb_alloc_urb() fails. Release reqs in the error handling path. Fixes: 71bb244b ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Eric Dumazet authored
commit 6935c398 upstream. The rcu_gp_fqs_check_wake() function uses rcu_preempt_blocked_readers_cgp() to read ->gp_tasks while other cpus might overwrite this field. We need READ_ONCE()/WRITE_ONCE() pairs to avoid compiler tricks and KCSAN splats like the following : BUG: KCSAN: data-race in rcu_gp_fqs_check_wake / rcu_preempt_deferred_qs_irqrestore write to 0xffffffff85a7f190 of 8 bytes by task 7317 on cpu 0: rcu_preempt_deferred_qs_irqrestore+0x43d/0x580 kernel/rcu/tree_plugin.h:507 rcu_read_unlock_special+0xec/0x370 kernel/rcu/tree_plugin.h:659 __rcu_read_unlock+0xcf/0xe0 kernel/rcu/tree_plugin.h:394 rcu_read_unlock include/linux/rcupdate.h:645 [inline] __ip_queue_xmit+0x3b0/0xa40 net/ipv4/ip_output.c:533 ip_queue_xmit+0x45/0x60 include/net/ip.h:236 __tcp_transmit_skb+0xdeb/0x1cd0 net/ipv4/tcp_output.c:1158 __tcp_send_ack+0x246/0x300 net/ipv4/tcp_output.c:3685 tcp_send_ack+0x34/0x40 net/ipv4/tcp_output.c:3691 tcp_cleanup_rbuf+0x130/0x360 net/ipv4/tcp.c:1575 tcp_recvmsg+0x633/0x1a30 net/ipv4/tcp.c:2179 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1864 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 read to 0xffffffff85a7f190 of 8 bytes by task 10 on cpu 1: rcu_gp_fqs_check_wake kernel/rcu/tree.c:1556 [inline] rcu_gp_fqs_check_wake+0x93/0xd0 kernel/rcu/tree.c:1546 rcu_gp_fqs_loop+0x36c/0x580 kernel/rcu/tree.c:1611 rcu_gp_kthread+0x143/0x220 kernel/rcu/tree.c:1768 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 10 Comm: rcu_preempt Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> [ paulmck: Added another READ_ONCE() for RCU CPU stall warnings. ] Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Signed-off-by:
-
Mathieu Desnoyers authored
commit 64ae572b upstream. Reading the sched_cmdline_ref and sched_tgid_ref initial state within tracing_start_sched_switch without holding the sched_register_mutex is racy against concurrent updates, which can lead to tracepoint probes being registered more than once (and thus trigger warnings within tracepoint.c). [ May be the fix for this bug ] Link: https://lore.kernel.org/r/000000000000ab6f84056c786b93@google.com Link: http://lkml.kernel.org/r/20190817141208.15226-1-mathieu.desnoyers@efficios.com Cc: stable@vger.kernel.org CC: Steven Rostedt (VMware) <rostedt@goodmis.org> CC: Joel Fernandes (Google) <joel@joelfernandes.org> CC: Peter Zijlstra <peterz@infradead.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Paul E. McKenney <paulmck@linux.ibm.com> Reported-by: syzbot+774fddf07b7ab29a1e55@syzkaller.appspotmail.com Fixes: d914ba37 ("tracing: Add support for recording tgid of tasks") Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Lu Shuaibing authored
commit 889b3317 upstream. A use of uninitialized memory in msgctl_down() because msqid64 in ksys_msgctl hasn't been initialized. The local | msqid64 | is created in ksys_msgctl() and then passed into msgctl_down(). Along the way msqid64 is never initialized before msgctl_down() checks msqid64->msg_qbytes. KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool) reports: ================================================================== BUG: KUMSAN: use of uninitialized memory in msgctl_down+0x94/0x300 Read of size 8 at addr ffff88806bb97eb8 by task syz-executor707/2022 CPU: 0 PID: 2022 Comm: syz-executor707 Not tainted 5.2.0-rc4+ #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x75/0xae __kumsan_report+0x17c/0x3e6 kumsan_report+0xe/0x20 msgctl_down+0x94/0x300 ksys_msgctl.constprop.14+0xef/0x260 do_syscall_64+0x7e/0x1f0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x4400e9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd869e0598 EFLAGS: 00000246 ORIG_RAX: 0000000000000047 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004400e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000246 R12: 0000000000401970 R13: 0000000000401a00 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:ffffea0001aee5c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000000() raw: 0100000000000000 0000000000000000 ffffffff01ae0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kumsan: bad access detected ================================================================== Syzkaller reproducer: msgctl$IPC_RMID(0x0, 0x0) C reproducer: // autogenerated by syzkaller (https://github.com/google/syzkaller) int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); syscall(__NR_msgctl, 0, 0, 0); return 0; } [natechancellor@gmail.com: adjust indentation in ksys_msgctl] Link: https://github.com/ClangBuiltLinux/linux/issues/829 Link: http://lkml.kernel.org/r/20191218032932.37479-1-natechancellor@gmail.com Link: http://lkml.kernel.org/r/20190613014044.24234-1-shuaibinglu@126.comSigned-off-by:
Lu Shuaibing <shuaibinglu@126.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Suggested-by:
-
Oliver Neukum authored
commit 2b8bd606 upstream. It is not enough to check for the number of endpoints. The types must also be correct. Reported-and-tested-by: syzbot+48a2851be24583b864dc@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reviewed-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Will Deacon authored
commit 68035c80 upstream. Way back in 2017, fuzzing the 4.14-rc2 USB stack with syzkaller kicked up the following WARNING from the UVC chain scanning code: | list_add double add: new=ffff880069084010, prev=ffff880069084010, | next=ffff880067d22298. | ------------[ cut here ]------------ | WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0 | Modules linked in: | CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted | 4.14.0-rc2-42613-g1488251d1a98 #238 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 | Workqueue: usb_hub_wq hub_event | task: ffff88006b01ca40 task.stack: ffff880064358000 | RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29 | RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286 | RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000 | RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac | RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000 | R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010 | R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0 | FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0 | Call Trace: | __list_add ./include/linux/list.h:59 | list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92 | uvc_scan_chain_forward.isra.8+0x373/0x416 | drivers/media/usb/uvc/uvc_driver.c:1471 | uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585 | uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769 | uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104 Looking into the output from usbmon, the interesting part is the following data packet: ffff880069c63e00 30710169 C Ci:1:002:0 0 143 = 09028f00 01030080 00090403 00000e01 00000924 03000103 7c003328 010204db If we drop the lead configuration and interface descriptors, we're left with an output terminal descriptor describing a generic display: /* Output terminal descriptor */ buf[0] 09 buf[1] 24 buf[2] 03 /* UVC_VC_OUTPUT_TERMINAL */ buf[3] 00 /* ID */ buf[4] 01 /* type == 0x0301 (UVC_OTT_DISPLAY) */ buf[5] 03 buf[6] 7c buf[7] 00 /* source ID refers to self! */ buf[8] 33 The problem with this descriptor is that it is self-referential: the source ID of 0 matches itself! This causes the 'struct uvc_entity' representing the display to be added to its chain list twice during 'uvc_scan_chain()': once via 'uvc_scan_chain_entity()' when it is processed directly from the 'dev->entities' list and then again immediately afterwards when trying to follow the source ID in 'uvc_scan_chain_forward()' Add a check before adding an entity to a chain list to ensure that the entity is not already part of a chain. Link: https://lore.kernel.org/linux-media/CAAeHK+z+Si69jUR+N-SjN9q4O+o5KFiNManqEa-PjUta7EOb7A@mail.gmail.com/ Cc: <stable@vger.kernel.org> Fixes: c0efd232 ("V4L/DVB (8145a): USB Video Class driver") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 5273a191 ] When a call is disconnected, the connection pointer from the call is cleared to make sure it isn't used again and to prevent further attempted transmission for the call. Unfortunately, there might be a daemon trying to use it at the same time to transmit a packet. Fix this by keeping call->conn set, but setting a flag on the call to indicate disconnection instead. Remove also the bits in the transmission functions where the conn pointer is checked and a ref taken under spinlock as this is now redundant. Fixes: 8d94aa38 ("rxrpc: Calls shouldn't hold socket refs") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 04d36d74 ] The introduction of a split between the reference count on rxrpc_local objects and the usage count didn't quite go far enough. A number of kernel work items need to make use of the socket to perform transmission. These also need to get an active count on the local object to prevent the socket from being closed. Fix this by getting the active count in those places. Also split out the raw active count get/put functions as these places tend to hold refs on the rxrpc_local object already, so getting and putting an extra object ref is just a waste of time. The problem can lead to symptoms like: BUG: kernel NULL pointer dereference, address: 0000000000000018 .. CPU: 2 PID: 818 Comm: kworker/u9:0 Not tainted 5.5.0-fscache+ #51 ... RIP: 0010:selinux_socket_sendmsg+0x5/0x13 ... Call Trace: security_socket_sendmsg+0x2c/0x3e sock_sendmsg+0x1a/0x46 rxrpc_send_keepalive+0x131/0x1ae rxrpc_peer_keepalive_worker+0x219/0x34b process_one_work+0x18e/0x271 worker_thread+0x1a3/0x247 kthread+0xe6/0xeb ret_from_fork+0x1f/0x30 Fixes: 730c5fd4 ("rxrpc: Fix local endpoint refcounting") Signed-off-by:
-
David Howells authored
[ Upstream commit f71dbf2f ] In rxrpc_input_data(), rxrpc_notify_socket() is called if the base sequence number of the packet is immediately following the hard-ack point at the end of the function. However, this isn't sufficient, since the recvmsg side may have been advancing the window and then overrun the position in which we're adding - at which point rx_hard_ack >= seq0 and no notification is generated. Fix this by always generating a notification at the end of the input function. Without this, a long call may stall, possibly indefinitely. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
-
David Howells authored
[ Upstream commit fac20b9e ] Fix rxrpc_put_local() to not access local->debug_id after calling atomic_dec_return() as, unless that returned n==0, we no longer have the right to access the object. Fixes: 06d9532f ("rxrpc: Fix read-after-free in rxrpc_queue_local()") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 784f8344 ] tp->segs_in and tp->segs_out need to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: 2efd055c ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit db7ffee6 ] tp->data_segs_in and tp->data_segs_out need to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: a44d6eac ("tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2fbdd562 ] tp->delivered needs to be cleared in tcp_disconnect(). tcp_disconnect() is rarely used, but it is worth fixing it. Fixes: ddf1af6f ("tcp: new delivery accounting") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
