Commits · ef27496f4165ec1c9605314a73180ea9743ea7d2 · Kirill Smelkov / linux

31 May, 2019 7 commits

libnvdimm/namespace: Fix label tracking error · ef27496f

Dan Williams authored Apr 30, 2019

commit c4703ce1 upstream.

Users have reported intermittent occurrences of DIMM initialization
failures due to duplicate allocations of address capacity detected in
the labels, or errors of the form below, both have the same root cause.

    nd namespace1.4: failed to track label: 0
    WARNING: CPU: 17 PID: 1381 at drivers/nvdimm/label.c:863

    RIP: 0010:__pmem_label_update+0x56c/0x590 [libnvdimm]
    Call Trace:
     ? nd_pmem_namespace_label_update+0xd6/0x160 [libnvdimm]
     nd_pmem_namespace_label_update+0xd6/0x160 [libnvdimm]
     uuid_store+0x17e/0x190 [libnvdimm]
     kernfs_fop_write+0xf0/0x1a0
     vfs_write+0xb7/0x1b0
     ksys_write+0x57/0xd0
     do_syscall_64+0x60/0x210

Unfortunately those reports were typically with a busy parallel
namespace creation / destruction loop making it difficult to see the
components of the bug. However, Jane provided a simple reproducer using
the work-in-progress sub-section implementation.

When ndctl is reconfiguring a namespace it may take an existing defunct
/ disabled namespace and reconfigure it with a new uuid and other
parameters. Critically namespace_update_uuid() takes existing address
resources and renames them for the new namespace to use / reconfigure as
it sees fit. The bug is that this rename only happens in the resource
tracking tree. Existing labels with the old uuid are not reaped leading
to a scenario where multiple active labels reference the same span of
address range.

Teach namespace_update_uuid() to flag any references to the old uuid for
reaping at the next label update attempt.

Cc: <stable@vger.kernel.org>
Fixes: bf9bccc1 ("libnvdimm: pmem label sets and namespace instantiation")
Link: https://github.com/pmem/ndctl/issues/91Reported-by: Jane Chu <jane.chu@oracle.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ef27496f

kvm: svm/avic: fix off-by-one in checking host APIC ID · 42fee5b3

Suthikulpanit, Suravee authored May 14, 2019

commit c9bcd3e3 upstream.

Current logic does not allow VCPU to be loaded onto CPU with
APIC ID 255. This should be allowed since the host physical APIC ID
field in the AVIC Physical APIC table entry is an 8-bit value,
and APIC ID 255 is valid in system with x2APIC enabled.
Instead, do not allow VCPU load if the host APIC ID cannot be
represented by an 8-bit value.

Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK
instead of AVIC_MAX_PHYSICAL_ID_COUNT.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

42fee5b3

crypto: vmx - CTR: always increment IV as quadword · c636a885

Daniel Axtens authored May 15, 2019

commit 009b30ac upstream.

The kernel self-tests picked up an issue with CTR mode:
alg: skcipher: p8_aes_ctr encryption test failed (wrong result) on test vector 3, cfg="uneven misaligned splits, may sleep"

Test vector 3 has an IV of FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD, so
after 3 increments it should wrap around to 0.

In the aesp8-ppc code from OpenSSL, there are two paths that
increment IVs: the bulk (8 at a time) path, and the individual
path which is used when there are fewer than 8 AES blocks to
process.

In the bulk path, the IV is incremented with vadduqm: "Vector
Add Unsigned Quadword Modulo", which does 128-bit addition.

In the individual path, however, the IV is incremented with
vadduwm: "Vector Add Unsigned Word Modulo", which instead
does 4 32-bit additions. Thus the IV would instead become
FFFFFFFFFFFFFFFFFFFFFFFF00000000, throwing off the result.

Use vadduqm.

This was probably a typo originally, what with q and w being
adjacent. It is a pretty narrow edge case: I am really
impressed by the quality of the kernel self-tests!

Fixes: 5c380d62 ("crypto: vmx - Add support for VMS instructions by ASM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

c636a885

Revert "scsi: sd: Keep disk read-only when re-reading partition" · 33d816ad

Martin K. Petersen authored May 20, 2019

commit 8acf608e upstream.

This reverts commit 20bd1d02.

This patch introduced regressions for devices that come online in
read-only state and subsequently switch to read-write.

Given how the partition code is currently implemented it is not
possible to persist the read-only flag across a device revalidate
call. This may need to get addressed in the future since it is common
for user applications to proactively call BLKRRPART.

Reverting this commit will re-introduce a regression where a
device-initiated revalidate event will cause the admin state to be
forgotten. A separate patch will address this issue.

Fixes: 20bd1d02 ("scsi: sd: Keep disk read-only when re-reading partition")
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

33d816ad

bio: fix improper use of smp_mb__before_atomic() · 6aab0ad9

Andrea Parri authored May 20, 2019

commit f381c6a4 upstream.

This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.

Replace the barrier with an smp_mb().

Fixes: dac56212 ("bio: skip atomic inc/dec of ->bi_cnt for most use cases")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6aab0ad9

KVM: x86: fix return value for reserved EFER · 11cf36c3

Paolo Bonzini authored May 24, 2019

commit 66f61c92 upstream.

Commit 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for
host-initiated writes", 2019-04-02) introduced a "return false" in a
function returning int, and anyway set_efer has a "nonzero on error"
conventon so it should be returning 1.
Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes")
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

11cf36c3

ext4: do not delete unlinked inode from orphan list on failed truncate · e386c027

Jan Kara authored May 23, 2019

commit ee0ed02c upstream.

It is possible that unlinked inode enters ext4_setattr() (e.g. if
somebody calls ftruncate(2) on unlinked but still open file). In such
case we should not delete the inode from the orphan list if truncate
fails. Note that this is mostly a theoretical concern as filesystem is
corrupted if we reach this path anyway but let's be consistent in our
orphan handling.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e386c027

25 May, 2019 33 commits

Linux 4.9.179 · 2584e66f
Greg Kroah-Hartman authored May 25, 2019

2584e66f

fbdev: sm712fb: fix memory frequency by avoiding a switch/case fallthrough · 9adc440e

Yifeng Li authored Apr 02, 2019

commit 9dc20113 upstream.

A fallthrough in switch/case was introduced in f627caf5 ("fbdev:
sm712fb: fix crashes and garbled display during DPMS modesetting"),
due to my copy-paste error, which would cause the memory clock frequency
for SM720 to be programmed to SM712.

Since it only reprograms the clock to a different frequency, it's only
a benign issue without visible side-effect, so it also evaded Sudip
Mukherjee's code review and regression tests. scripts/checkpatch.pl
also failed to discover the issue, possibly due to nested switch
statements.

This issue was found by Stephen Rothwell by building linux-next with
-Wimplicit-fallthrough.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f627caf5 ("fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting")
Signed-off-by: Yifeng Li <tomli@tomli.me>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9adc440e

btrfs: Honour FITRIM range constraints during free space trim · 038ec2c1

Nikolay Borisov authored Mar 25, 2019

commit c2d1b3aa upstream.

Up until now trimming the freespace was done irrespective of what the
arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments
will be entirely ignored. Fix it by correctly handling those paramter.
This requires breaking if the found freespace extent is after the end of
the passed range as well as completing trim after trimming
fstrim_range::len bytes.

Fixes: 499f377f ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

038ec2c1

md/raid: raid5 preserve the writeback action after the parity check · 4354c04c

Nigel Croxon authored Apr 16, 2019

commit b2176a1d upstream.

The problem is that any 'uptodate' vs 'disks' check is not precise
in this path. Put a "WARN_ON(!test_bit(R5_UPTODATE, &dev->flags)" on the
device that might try to kick off writes and then skip the action.
Better to prevent the raid driver from taking unexpected action *and* keep
the system alive vs killing the machine with BUG_ON.

Note: fixed warning reported by kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4354c04c

Revert "Don't jump to compute_result state from check_result state" · 3ece5c49

Song Liu authored Apr 16, 2019

commit a25d8c32 upstream.

This reverts commit 4f4fd7c5.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nigel Croxon <ncroxon@redhat.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3ece5c49

perf bench numa: Add define for RUSAGE_THREAD if not present · 9f5f0d81

Arnaldo Carvalho de Melo authored Apr 25, 2019

[ Upstream commit bf561d3c ]

While cross building perf to the ARC architecture on a fedora 30 host,
we were failing with:

      CC       /tmp/build/perf/bench/numa.o
  bench/numa.c: In function ‘worker_thread’:
  bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’?
    getrusage(RUSAGE_THREAD, &rusage);
              ^~~~~~~~~~~~~
              SIGEV_THREAD
  bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in

[perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1
arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
[perfbuilder@60d5802468f6 perf]$

Trying to reproduce a report by Vineet, I noticed that, with just
cross-built zlib and numactl libraries, I ended up with the above
failure.

So, since RUSAGE_THREAD is available as a define, check for that and
numactl libraries, I ended up with the above failure.

So, since RUSAGE_THREAD is available as a define in the system headers,
check if it is defined in the 'perf bench numa' sources and define it if
not.

Now it builds and I have to figure out if the problem reported by Vineet
only takes place if we have libelf or some other library available.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9f5f0d81

ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour · 2871ffa4

Al Viro authored May 01, 2019

[ Upstream commit 4e903604 ]

To choose whether to pick the GID from the old (16bit) or new (32bit)
field, we should check if the old gid field is set to 0xffff.  Mainline
checks the old *UID* field instead - cut'n'paste from the corresponding
code in ufs_get_inode_uid().

Fixes: 252e211eSigned-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

2871ffa4

power: supply: sysfs: prevent endless uevent loop with CONFIG_POWER_SUPPLY_DEBUG · 5e593636

Andrey Smirnov authored Apr 24, 2019

[ Upstream commit 349ced99 ]

Fix a similar endless event loop as was done in commit
8dcf3217 ("i2c: prevent endless uevent loop with
CONFIG_I2C_DEBUG_CORE"):

  The culprit is the dev_dbg printk in the i2c uevent handler. If
  this is activated (for instance by CONFIG_I2C_DEBUG_CORE) it results
  in an endless loop with systemd-journald.

  This happens if user-space scans the system log and reads the uevent
  file to get information about a newly created device, which seems
  fair use to me. Unfortunately reading the "uevent" file uses the
  same function that runs for creating the uevent for a new device,
  generating the next syslog entry

Both CONFIG_I2C_DEBUG_CORE and CONFIG_POWER_SUPPLY_DEBUG were reported
in https://bugs.freedesktop.org/show_bug.cgi?id=76886 but only former
seems to have been fixed. Drop debug prints as it was done in I2C
subsystem to resolve the issue.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

5e593636

KVM: arm/arm64: Ensure vcpu target is unset on reset failure · 9c905e1a

Andrew Jones authored Apr 04, 2019

[ Upstream commit 811328fc ]

A failed KVM_ARM_VCPU_INIT should not set the vcpu target,
as the vcpu target is used by kvm_vcpu_initialized() to
determine if other vcpu ioctls may proceed. We need to set
the target before calling kvm_reset_vcpu(), but if that call
fails, we should then unset it and clear the feature bitmap
while we're at it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
[maz: Simplified patch, completed commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9c905e1a

mac80211: Fix kernel panic due to use of txq after free · 72d00b6e

Bhagavathi Perumal S authored Apr 16, 2019

[ Upstream commit f1267cf3 ]

The txq of vif is added to active_txqs list for ATF TXQ scheduling
in the function ieee80211_queue_skb(), but it was not properly removed
before freeing the txq object. It was causing use after free of the txq
objects from the active_txqs list, result was kernel panic
due to invalid memory access.

Fix kernel invalid memory access by properly removing txq object
from active_txqs list before free the object.
Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

72d00b6e

xfrm4: Fix uninitialized memory read in _decode_session4 · 5b28db54

Steffen Klassert authored Feb 26, 2019

[ Upstream commit 8742dc86 ]

We currently don't reload pointers pointing into skb header
after doing pskb_may_pull() in _decode_session4(). So in case
pskb_may_pull() changed the pointers, we read from random
memory. Fix this by putting all the needed infos on the
stack, so that we don't need to access the header pointers
after doing pskb_may_pull().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

5b28db54

vti4: ipip tunnel deregistration fixes. · eb490b31

Jeremy Sowden authored Mar 19, 2019

[ Upstream commit 5483844c ]

If tunnel registration failed during module initialization, the module
would fail to deregister the IPPROTO_COMP protocol and would attempt to
deregister the tunnel.

The tunnel was not deregistered during module-exit.

Fixes: dd9ee344 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel")
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eb490b31

xfrm6_tunnel: Fix potential panic when unloading xfrm6_tunnel module · eaa8cf57

Su Yanjun authored Mar 14, 2019

[ Upstream commit 6ee02a54 ]

When unloading xfrm6_tunnel module, xfrm6_tunnel_fini directly
frees the xfrm6_tunnel_spi_kmem. Maybe someone has gotten the
xfrm6_tunnel_spi, so need to wait it.

Fixes: 91cc3bb0("xfrm6_tunnel: RCU conversion")
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eaa8cf57

xfrm: policy: Fix out-of-bound array accesses in __xfrm_policy_unlink · 7c96721f

YueHaibing authored Feb 28, 2019

[ Upstream commit b805d78d ]

UBSAN report this:

UBSAN: Undefined behaviour in net/xfrm/xfrm_policy.c:1289:24
index 6 is out of range for type 'unsigned int [6]'
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.162-514.55.6.9.x86_64+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
 0000000000000000 1466cf39b41b23c9 ffff8801f6b07a58 ffffffff81cb35f4
 0000000041b58ab3 ffffffff83230f9c ffffffff81cb34e0 ffff8801f6b07a80
 ffff8801f6b07a20 1466cf39b41b23c9 ffffffff851706e0 ffff8801f6b07ae8
Call Trace:
 <IRQ>  [<ffffffff81cb35f4>] __dump_stack lib/dump_stack.c:15 [inline]
 <IRQ>  [<ffffffff81cb35f4>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51
 [<ffffffff81d94225>] ubsan_epilogue+0x12/0x8f lib/ubsan.c:164
 [<ffffffff81d954db>] __ubsan_handle_out_of_bounds+0x16e/0x1b2 lib/ubsan.c:382
 [<ffffffff82a25acd>] __xfrm_policy_unlink+0x3dd/0x5b0 net/xfrm/xfrm_policy.c:1289
 [<ffffffff82a2e572>] xfrm_policy_delete+0x52/0xb0 net/xfrm/xfrm_policy.c:1309
 [<ffffffff82a3319b>] xfrm_policy_timer+0x30b/0x590 net/xfrm/xfrm_policy.c:243
 [<ffffffff813d3927>] call_timer_fn+0x237/0x990 kernel/time/timer.c:1144
 [<ffffffff813d8e7e>] __run_timers kernel/time/timer.c:1218 [inline]
 [<ffffffff813d8e7e>] run_timer_softirq+0x6ce/0xb80 kernel/time/timer.c:1401
 [<ffffffff8120d6f9>] __do_softirq+0x299/0xe10 kernel/softirq.c:273
 [<ffffffff8120e676>] invoke_softirq kernel/softirq.c:350 [inline]
 [<ffffffff8120e676>] irq_exit+0x216/0x2c0 kernel/softirq.c:391
 [<ffffffff82c5edab>] exiting_irq arch/x86/include/asm/apic.h:652 [inline]
 [<ffffffff82c5edab>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926
 [<ffffffff82c5c985>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:735
 <EOI>  [<ffffffff81188096>] ? native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:52
 [<ffffffff810834d7>] arch_safe_halt arch/x86/include/asm/paravirt.h:111 [inline]
 [<ffffffff810834d7>] default_idle+0x27/0x430 arch/x86/kernel/process.c:446
 [<ffffffff81085f05>] arch_cpu_idle+0x15/0x20 arch/x86/kernel/process.c:437
 [<ffffffff8132abc3>] default_idle_call+0x53/0x90 kernel/sched/idle.c:92
 [<ffffffff8132b32d>] cpuidle_idle_call kernel/sched/idle.c:156 [inline]
 [<ffffffff8132b32d>] cpu_idle_loop kernel/sched/idle.c:251 [inline]
 [<ffffffff8132b32d>] cpu_startup_entry+0x60d/0x9a0 kernel/sched/idle.c:299
 [<ffffffff8113e119>] start_secondary+0x3c9/0x560 arch/x86/kernel/smpboot.c:245

The issue is triggered as this:

xfrm_add_policy
    -->verify_newpolicy_info  //check the index provided by user with XFRM_POLICY_MAX
			      //In my case, the index is 0x6E6BB6, so it pass the check.
    -->xfrm_policy_construct  //copy the user's policy and set xfrm_policy_timer
    -->xfrm_policy_insert
	--> __xfrm_policy_link //use the orgin dir, in my case is 2
	--> xfrm_gen_index   //generate policy index, there is 0x6E6BB6

then xfrm_policy_timer be fired

xfrm_policy_timer
   --> xfrm_policy_id2dir  //get dir from (policy index & 7), in my case is 6
   --> xfrm_policy_delete
      --> __xfrm_policy_unlink //access policy_count[dir], trigger out of range access

Add xfrm_policy_id2dir check in verify_newpolicy_info, make sure the computed dir is
valid, to fix the issue.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e682adf0 ("xfrm: Try to honor policy index if it's supplied by user")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

7c96721f

dm delay: fix a crash when invalid device is specified · 1f4195f9

Mikulas Patocka authored Apr 25, 2019

commit 81bc6d15 upstream.

When the target line contains an invalid device, delay_ctr() will call
delay_dtr() with NULL workqueue.  Attempting to destroy the NULL
workqueue causes a crash.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1f4195f9

PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum · d0a3f25d

Stefan Mätje authored Mar 29, 2019

commit 4ec73791 upstream.

Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode
(conventional PCI on primary side, PCIe on downstream side), the Retrain
Link bit needs to be cleared manually to allow the link training to
complete successfully.

If it is not cleared manually, the link training is continuously restarted
and no devices below the PCI-to-PCIe bridge can be accessed.  That means
drivers for devices below the bridge will be loaded but won't work and may
even crash because the driver is only reading 0xffff.

See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for
details.  Devices known as affected so far are: PI7C9X110, PI7C9X111SL,
PI7C9X130.

Add a new flag, clear_retrain_link, in struct pci_dev.  Quirks for affected
devices set this bit.

Note that pcie_retrain_link() lives in aspm.c because that's currently the
only place we use it, but this erratum is not specific to ASPM, and we may
retrain links for other reasons in the future.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
[bhelgaas: apply regardless of CONFIG_PCIEASPM]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

d0a3f25d

PCI: Factor out pcie_retrain_link() function · 1c38a7b6

Stefan Mätje authored Mar 29, 2019

commit 86fa6a34 upstream.

Factor out pcie_retrain_link() to use for Pericom Retrain Link quirk.  No
functional change intended.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1c38a7b6

PCI: Mark Atheros AR9462 to avoid bus reset · 0e21ba0f

James Prestwood authored Jan 07, 2019

commit 6afb7e26 upstream.

When using PCI passthrough with this device, the host machine locks up
completely when starting the VM, requiring a hard reboot. Add a quirk to
avoid bus resets on this device.

Fixes: c3e59ee4 ("PCI: Mark Atheros AR93xx to avoid bus reset")
Link: https://lore.kernel.org/linux-pci/20190107213248.3034-1-james.prestwood@linux.intel.comSigned-off-by: James Prestwood <james.prestwood@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>