- 13 Aug, 2021 10 commits
-
-
Aneesh Kumar K.V authored
This helper is only used with the dispatch trace log collection. A later patch will add Form2 affinity support and this change helps in keeping that simpler. Also add a comment explaining we don't expect the code to be called with FORM0 Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210812132223.225214-5-aneesh.kumar@linux.ibm.com
-
Aneesh Kumar K.V authored
The associativity details of the newly added resourced are collected from the hypervisor via "ibm,configure-connector" rtas call. Update the numa distance details of the newly added numa node after the above call. Instead of updating NUMA distance every time we lookup a node id from the associativity property, add helpers that can be used during boot which does this only once. Also remove the distance update from node id lookup helpers. Currently, we duplicate parsing code for ibm,associativity and ibm,associativity-lookup-arrays in the kernel. The associativity array provided by these device tree properties are very similar and hence can use a helper to parse the node id and numa distance details. Signed-off-by:
-
Aneesh Kumar K.V authored
Also make related code cleanup that will allow adding FORM2_AFFINITY in later patches. No functional change in this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
No functional change in this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
No functional change in this patch. arch_debugfs_dir is the generic kernel name declared in linux/debugfs.h for arch-specific debugfs directory. Architectures like x86/s390 already use the name. Rename powerpc specific powerpc_debugfs_root to arch_debugfs_dir. Signed-off-by:
-
Aneesh Kumar K.V authored
Similar to x86/s390 add a debugfs file to tune tlb_single_page_flush_ceiling. Also add a debugfs entry for tlb_local_single_page_flush_ceiling. Signed-off-by:
-
Pratik R. Sampat authored
In the numa=off kernel command-line configuration init_chip_info() loops around the number of chips and attempts to copy the cpumask of that node which is NULL for all iterations after the first chip. Hence, store the cpu mask for each chip instead of derving cpumask from node while populating the "chips" struct array and copy that to the chips[i].mask Fixes: 053819e0 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level") Cc: stable@vger.kernel.org # v4.3+ Reported-by:
Shirisha Ganta <shirisha.ganta1@ibm.com> Signed-off-by:
Pratik R. Sampat <psampat@linux.ibm.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> [mpe: Rename goto label to out_free_chip_cpu_mask] Signed-off-by:
-
Emmanuel Gil Peyrot authored
This selects the nintendo-otp module when building for this platform. Signed-off-by:
Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Signed-off-by:
-
Emmanuel Gil Peyrot authored
This can be used by the newly-added nintendo-otp nvmem module. Signed-off-by:
-
Emmanuel Gil Peyrot authored
This is wrong, but needed in order to avoid overlapping ranges with the OTP area added in the next commit. A refactor of this part of the device tree is needed: according to Wiibrew[1], this area starts at 0x0d800000 and spans 0x400 bytes (that is, 0x100 32-bit registers), encompassing PIC and GPIO registers, amongst the ones already exposed in this device tree, which should become children of the control@d800000 node. [1] https://wiibrew.org/wiki/Hardware/Hollywood_RegistersSigned-off-by:
-
- 10 Aug, 2021 30 commits
-
-
Marc Zyngier authored
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Cédric Le Goater authored
On P10, the feature doing an automatic "save & restore" of a VCPU interrupt context is set by default in OPAL. When a VP context is pulled out, the state of the interrupt registers are saved by the XIVE interrupt controller under the internal NVP structure representing the VP. This saves a costly store/load in guest entries and exits. If OPAL advertises the "save & restore" feature in the device tree, it should also have set the 'H' bit in the CAM line. Check that when vCPUs are connected to their ICP in KVM before going any further. Signed-off-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Cédric Le Goater authored
Use it to hold platform specific features. P9 DD2 introduced single-escalation support. P10 will add others. Signed-off-by:
-
Cédric Le Goater authored
There is no need to use the lockup detector ("noirqdebug") for IPIs. The ipistorm benchmark measures a ~10% improvement on high systems when this flag is set. Signed-off-by:Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Cédric Le Goater authored
The default domain of the PCI/MSIs is not the XIVE domain anymore. To list the IRQ mappings under XMON and debugfs, query the IRQ data from the low level XIVE domain. Signed-off-by:
-
Cédric Le Goater authored
PCI MSIs now live in an MSI domain but the underlying calls, which will EOI the interrupt in real mode, need an HW IRQ number mapped in the XICS IRQ domain. Grab it there. Signed-off-by:
-
Cédric Le Goater authored
pnv_opal_pci_msi_eoi() is called from KVM to EOI passthrough interrupts when in real mode. Adding MSI domain broke the hack using the 'ioda.irq_chip' field to deduce the owning PHB. Fix that by using the IRQ chip data in the MSI domain. The 'ioda.irq_chip' field is now unused and could be removed from the pnv_phb struct. Signed-off-by:
-
Cédric Le Goater authored
Before MSI domains, the default IRQ chip of PHB3 MSIs was patched by pnv_set_msi_irq_chip() with the custom EOI handler pnv_ioda2_msi_eoi() and the owning PHB was deduced from the 'ioda.irq_chip' field. This path has been deprecated by the MSI domains but it is still in use by the P8 CAPI 'cxl' driver. Rewriting this driver to support MSI would be a waste of time. Nevertheless, we can still remove the IRQ chip patch and set the IRQ chip data instead. This is cleaner. Signed-off-by:
-
Cédric Le Goater authored
desc->irq_data points to the top level IRQ data descriptor which is not necessarily in the XICS IRQ domain. MSIs are in another domain for instance. Fix that by looking for a mapping on the low level XICS IRQ domain. Signed-off-by:
-
Cédric Le Goater authored
The pnv_ioda2_msi_eoi() chip handler is not used anymore for MSIs. Simply use the check on the PSI-MSI chip. Signed-off-by:
-
Cédric Le Goater authored
MSIs should be fully managed by the PCI and IRQ subsystems now. Signed-off-by:
-
Cédric Le Goater authored
MSIs should be fully managed by the PCI and IRQ subsystems now. Signed-off-by:
-
Cédric Le Goater authored
That was a workaround in the XICS domain because of the lack of MSI domain. This is now handled. Signed-off-by:
-
Cédric Le Goater authored
The PowerNV and pSeries platforms now have support for both the XICS and XIVE IRQ domains. Signed-off-by:
-
Cédric Le Goater authored
PHB3s need an extra OPAL call to EOI the interrupt. The call takes an OPAL HW IRQ number but it is translated into a vector number in OPAL. Here, we directly use the vector number of the in-the-middle "PNV-MSI" domain instead of grabbing the OPAL HW IRQ number in the XICS parent domain. Signed-off-by:
-
Cédric Le Goater authored
XICS doesn't have any state associated with the IRQ. The support is straightforward and simpler than for XIVE. Signed-off-by:
-
Cédric Le Goater authored
It really helps to know how the HW is configured when tweaking the IRQ subsystem. Signed-off-by:
-
Cédric Le Goater authored
and clean up the error path. Signed-off-by:
-
Cédric Le Goater authored
This moves the IRQ initialization done under the different ICS backends in the common part of XICS. The 'map' handler becomes a simple 'check' on the HW IRQ at the FW level. As we don't need an ICS anymore in xics_migrate_irqs_away(), the XICS domain does not set a chip data for the IRQ. Signed-off-by:
-
Cédric Le Goater authored
We always had only one ICS per machine. Simplify the XICS driver by removing the ICS list. The ICS stored in the chip data of the XICS domain becomes useless and we don't need it anymore to migrate away IRQs from a CPU. This will be removed in a subsequent patch. Signed-off-by:
-
Cédric Le Goater authored
PCI MSI interrupt numbers are now mapped in a PCI-MSI domain but the underlying calls handling the passthrough of the interrupt in the guest need a number in the XIVE IRQ domain. Use the IRQ data mapped in the XIVE IRQ domain and not the one in the PCI-MSI domain. Signed-off-by:
-
Cédric Le Goater authored
The routine kvmppc_set_passthru_irq() calls kvmppc_xive_set_mapped() and kvmppc_xive_clr_mapped() with an IRQ descriptor. Use directly the host IRQ number to remove a useless conversion. Add some debug. Signed-off-by:
-
Cédric Le Goater authored
Passthrough PCI MSI interrupts are detected in KVM with a check on a specific EOI handler (P8) or on XIVE (P9). We can now check the PCI-MSI IRQ chip which is cleaner. Signed-off-by:
-
Cédric Le Goater authored
This is very similar to the MSI domains of the pSeries platform. The MSI allocator is directly handled under the Linux PHB in the in-the-middle "PNV-MSI" domain. Only the XIVE (P9/P10) parent domain is supported for now. Support for XICS will come later. Signed-off-by:
-
Cédric Le Goater authored
It will be used as a 'compose_msg' handler of the MSI domain introduced later. Signed-off-by:
-
Cédric Le Goater authored
Simply allocate or release the MSI domains when a PHB is inserted in or removed from the machine. Signed-off-by:
-
Cédric Le Goater authored
The MSI domain clears the IRQ with msi_domain_free(), which calls irq_domain_free_irqs_top(), which clears the handler data. This is a problem for the XIVE controller since we need to unmap MMIO pages and free a specific XIVE structure. The 'msi_free()' handler is called before irq_domain_free_irqs_top() when the handler data is still available. Use that to clear the XIVE controller data. Signed-off-by:
-
Cédric Le Goater authored
The RTAS firmware can not disable one MSI at a time. It's all or nothing. We need a custom free IRQ handler for that. Signed-off-by:
-
Cédric Le Goater authored
In the early days of XIVE support, commit cffb717c ("powerpc/xive: Ensure active irqd when setting affinity") tried to fix an issue related to interrupt migration. If the root cause was related to CPU unplug, it should have been fixed and there is no reason to keep the irqd_is_started() check. This test is also breaking affinity setting of MSIs which can set before starting the associated IRQ. Signed-off-by:
-
Cédric Le Goater authored
That was a workaround in the XIVE domain because of the lack of MSI domain. This is now handled. Signed-off-by:
-
