- 04 Jul, 2014 4 commits
-
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Oleg Nesterov found and fixed a bug in the perf/ftrace/uprobes code where running: # perf probe -x /lib/libc.so.6 syscall # echo 1 >> /sys/kernel/debug/tracing/events/probe_libc/enable # perf record -e probe_libc:syscall whatever kills the uprobe. Along the way he found some other minor bugs and clean ups that he fixed up making it a total of 4 patches. Doing unrelated work, I found that the reading of the ftrace trace file disables all function tracer callbacks. This was fine when ftrace was the only user, but now that it's used by perf and kprobes, this is a bug where reading trace can disable kprobes and perf. A very unexpected side effect and should be fixed" * tag 'trace-fixes-v3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove ftrace_stop/start() from reading the trace file tracing/uprobes: Fix the usage of uprobe_buffer_enable() in probe_event_enable() tracing/uprobes: Kill the bogus UPROBE_HANDLER_REMOVE code in uprobe_dispatcher() uprobes: Change unregister/apply to WARN() if uprobe/consumer is gone tracing/uprobes: Revert "Support mix of ftrace and perf"
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kbuild fix from Michal Marek: "There is one more fix for the relative paths series from -rc1: Print the path to the build directory at the start of the build, so that editors and IDEs can match the relative paths to source files" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Print the name of the build directory
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd bugfixes from Bruce Fields: "By coincidence, two NFSv4 symlink bugs, one introduced in the 3.16 xdr encoding rewrite, the other a decoding bug that I think we've had since the start but that just doesn't trigger very often" * 'for-3.16' of git://linux-nfs.org/~bfields/linux: nfs: fix nfs4d readlink truncated packet nfsd: fix rare symlink decoding bug
-
Tejun Heo authored
The 'sysret' fastpath does not correctly restore even all regular registers, much less any segment registers or reflags values. That is very much part of why it's faster than 'iret'. Normally that isn't a problem, because the normal ptrace() interface catches the process using the signal handler infrastructure, which always returns with an iret. However, some paths can get caught using ptrace_event() instead of the signal path, and for those we need to make sure that we aren't going to return to user space using 'sysret'. Otherwise the modifications that may have been done to the register set by the tracer wouldn't necessarily take effect. Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from arch_ptrace_stop_needed() which is invoked from ptrace_stop(). Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Oleg Nesterov <oleg@redhat.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by:
-
- 03 Jul, 2014 16 commits
-
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: shmem: fix init_page_accessed use to stop !PageLRU bug kernel/printk/printk.c: revert "printk: enable interrupts before calling console_trylock_for_printk()" tools/testing/selftests/ipc/msgque.c: improve error handling when not running as root fs/seq_file: fallback to vmalloc allocation /proc/stat: convert to single_open_size() hwpoison: fix the handling path of the victimized page frame that belong to non-LRU mm:vmscan: update the trace-vmscan-postprocess.pl for event vmscan/mm_vmscan_lru_isolate msync: fix incorrect fstart calculation zram: revalidate disk after capacity change tools: memory-hotplug fix unexpected operator error tools: cpu-hotplug fix unexpected operator error autofs4: fix false positive compile error slub: fix off by one in number of slab tests mm: page_alloc: fix CMA area initialisation when pageblock > MAX_ORDER
-
Hugh Dickins authored
Under shmem swapping load, I sometimes hit the VM_BUG_ON_PAGE(!PageLRU) in isolate_lru_pages() at mm/vmscan.c:1281! Commit 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible") looks like interrupted work-in-progress. mm/filemap.c's call to init_page_accessed() is fine, but not mm/shmem.c's - shmem_write_begin() is clearly wrong to use it after shmem_getpage(), when the page is always visible in radix_tree, and often already on LRU. Revert change to shmem_write_begin(), and use init_page_accessed() or mark_page_accessed() appropriately for SGP_WRITE in shmem_getpage_gfp(). SGP_WRITE also covers shmem_symlink(), which did not mark_page_accessed() before; but since many other filesystems use [__]page_symlink(), which did and does mark the page accessed, consider this as rectifying an oversight. Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
kernel/printk/printk.c: revert "printk: enable interrupts before calling console_trylock_for_printk()" Revert commit 939f04be ("printk: enable interrupts before calling console_trylock_for_printk()"). Andreas reported: : None of the post 3.15 kernel boot for me. They all hang at the GRUB : screen telling me it loaded and started the kernel, but the kernel : itself stops before it prints anything (or even replaces the GRUB : background graphics). 939f04be is modest latency reduction. Revert it until we understand the reason for these failures. Reported-by:
Andreas Bombe <aeb@debian.org> Cc: Jan Kara <jack@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Shuah Khan authored
The test fails in the middle when it is not run as root while accessing /proc/sys/kernel/msg_next_id. Changed it to check for root at the beginning of the test and exit if not root. Signed-off-by:
Shuah Khan <shuah.kh@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Heiko Carstens authored
There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by:Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by:
David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Heiko Carstens authored
These two patches are supposed to "fix" failed order-4 memory allocations which have been observed when reading /proc/stat. The problem has been observed on s390 as well as on x86. To address the problem change the seq_file memory allocations to fallback to use vmalloc, so that allocations also work if memory is fragmented. This approach seems to be simpler and less intrusive than changing /proc/stat to use an interator. Also it "fixes" other users as well, which use seq_file's single_open() interface. This patch (of 2): Use seq_file's single_open_size() to preallocate a buffer that is large enough to hold the whole output, instead of open coding it. Also calculate the requested size using the number of online cpus instead of possible cpus, since the size of the output only depends on the number of online cpus. Signed-off-by:
-
Chen Yucong authored
Until now, the kernel has the same policy to handle victimized page frames that belong to kernel-space(reserved/slab-subsystem) or non-LRU(unknown page state). In other word, the result of handling either of these victimized page frames is (IGNORED | FAILED), and the return value of memory_failure() is -EBUSY. This patch is to avoid that memory_failure() returns very soon due to the "true" value of (!PageLRU(p)), and it also ensures that action_result() can report more precise information("reserved kernel", "kernel slab", and "unknown page state") instead of "non LRU", especially for memory errors which are detected by memory-scrubbing. Andi said: : While running the mcelog test suite on 3.14 I hit the following VM_BUG_ON: : : soft_offline: 0x56d4: unknown non LRU page type 3ffff800008000 : page:ffffea000015b400 count:3 mapcount:2097169 mapping: (null) index:0xffff8800056d7000 : page flags: 0x3ffff800004081(locked|slab|head) : ------------[ cut here ]------------ : kernel BUG at mm/rmap.c:1495! : : I think what happened is that a LRU page turned into a slab page in : parallel with offlining. memory_failure initially tests for this case, : but doesn't retest later after the page has been locked. : : ... : : I ran this patch in a loop over night with some stress plus : the mcelog test suite running in a loop. I cannot guarantee it hit it, : but it should have given it a good beating. : : The kernel survived with no messages, although the mcelog test suite : got killed at some point because it couldn't fork anymore. Probably : some unrelated problem. : : So the patch is ok for me for .16. Signed-off-by:Chen Yucong <slaoub@gmail.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by:
Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Chen Yucong authored
When using trace-vmscan-postprocess.pl for checking the file/anon rate of scanning, we can find that it can not be performed. At the same time, the following message will be reported: WARNING: Format not as expected for event vmscan/mm_vmscan_lru_isolate 'file' != 'contig_taken' Fewer fields than expected in format at ./trace-vmscan-postprocess.pl line 171, <FORMAT> line 76. In trace-vmscan-postprocess.pl, (contig_taken, contig_dirty, and contig_failed) are be associated respectively to (nr_lumpy_taken, nr_lumpy_dirty, and nr_lumpy_failed) for lumpy reclaim. Via commit c53919ad ("mm: vmscan: remove lumpy reclaim"), lumpy reclaim had already been removed by Mel, but the update for trace-vmscan-postprocess.pl was missed. Signed-off-by:
-
Namjae Jeon authored
Fix a regression caused by 7fc34a62 ("mm/msync.c: sync only the requested range in msync()"). xfstests generic/075 fail occured on ext4 data=journal mode because the intended range was not syncing due to wrong fstart calculation. Signed-off-by:
Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by:
Ashish Sangwan <a.sangwan@samsung.com> Reported-by:
Eric Whitney <enwlinux@gmail.com> Tested-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Tested-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Minchan Kim authored
Alexander reported mkswap on /dev/zram0 is failed if other process is opening the block device file. Step is as follows, 0. Reset the unused zram device. 1. Use a program that opens /dev/zram0 with O_RDWR and sleeps until killed. 2. While that program sleeps, echo the correct value to /sys/block/zram0/disksize. 3. Verify (e.g. in /proc/partitions) that the disk size is applied correctly. It is. 4. While that program still sleeps, attempt to mkswap /dev/zram0. This fails: mkswap: error: swap area needs to be at least 40 KiB When I investigated, the size get by ioctl(fd, BLKGETSIZE64, xxx) on mkswap to get a size of blockdev was zero although zram0 has right size by 2. The reason is zram didn't revalidate disk after changing capacity so that size of blockdev's inode is not uptodate until all of file is close. This patch should fix the BUG. Signed-off-by:
Minchan Kim <minchan@kernel.org> Reported-by:
Alexander E. Patrakov <patrakov@gmail.com> Tested-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by:
Jerome Marchand <jmarchan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Shuah Khan authored
on-off-test uses "$UID != 0" to test for root, but $UID is a construct specific to bash. Using /bin/sh that isn't bash results in the following error (due to the "$UID" part expanding to nothing): ./on-off-test.sh: 9: [: !=: unexpected operator Change Makefile to use bash instead. Signed-off-by:
-
Shuah Khan authored
on-off-test uses "$UID != 0" to test for root, but $UID is a construct specific to bash. Using /bin/sh that isn't bash results in the following error (due to the "$UID" part expanding to nothing): ./on-off-test.sh: 9: [: !=: unexpected operator Change Makefile to use bash instead. Signed-off-by:
-
Ian Kent authored
On strict build environments we can see: fs/autofs4/inode.c: In function 'autofs4_fill_super': fs/autofs4/inode.c:312: error: 'pgrp' may be used uninitialized in this function make[2]: *** [fs/autofs4/inode.o] Error 1 make[1]: *** [fs/autofs4] Error 2 make: *** [fs] Error 2 make: *** Waiting for unfinished jobs.... This is due to the use of pgrp_set being used to indicate pgrp has has been set rather than initializing pgrp itself. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Joonsoo Kim authored
min_partial means minimum number of slab cached in node partial list. So, if nr_partial is less than it, we keep newly empty slab on node partial list rather than freeing it. But if nr_partial is equal or greater than it, it means that we have enough partial slabs so should free newly empty slab. Current implementation missed the equal case so if we set min_partial is 0, then, at least one slab could be cached. This is critical problem to kmemcg destroying logic because it doesn't works properly if some slabs is cached. This patch fixes this problem. Fixes 91cb69620284 ("slub: make dead memcg caches discard free slabs immediately"). Signed-off-by:Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by:
-
Michal Nazarewicz authored
With a kernel configured with ARM64_64K_PAGES && !TRANSPARENT_HUGEPAGE, the following is triggered at early boot: SMP: Total of 8 processors activated. devtmpfs: initialized Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = fffffe0000050000 [00000008] *pgd=00000043fba00003, *pmd=00000043fba00003, *pte=00e0000078010407 Internal error: Oops: 96000006 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc864k+ #44 task: fffffe03bc040000 ti: fffffe03bc080000 task.ti: fffffe03bc080000 PC is at __list_add+0x10/0xd4 LR is at free_one_page+0x270/0x638 ... Call trace: __list_add+0x10/0xd4 free_one_page+0x26c/0x638 __free_pages_ok.part.52+0x84/0xbc __free_pages+0x74/0xbc init_cma_reserved_pageblock+0xe8/0x104 cma_init_reserved_areas+0x190/0x1e4 do_one_initcall+0xc4/0x154 kernel_init_freeable+0x204/0x2a8 kernel_init+0xc/0xd4 This happens because init_cma_reserved_pageblock() calls __free_one_page() with pageblock_order as page order but it is bigger than MAX_ORDER. This in turn causes accesses past zone->free_list[]. Fix the problem by changing init_cma_reserved_pageblock() such that it splits pageblock into individual MAX_ORDER pages if pageblock is bigger than a MAX_ORDER page. In cases where !CONFIG_HUGETLB_PAGE_SIZE_VARIABLE, which is all architectures expect for ia64, powerpc and tile at the moment, the âpageblock_order > MAX_ORDERâ condition will be optimised out since both sides of the operator are constants. In cases where pageblock size is variable, the performance degradation should not be significant anyway since init_cma_reserved_pageblock() is called only at boot time at most MAX_CMA_AREAS times which by default is eight. Signed-off-by:Michal Nazarewicz <mina86@mina86.com> Reported-by:
Mark Salter <msalter@redhat.com> Tested-by:
Christopher Covington <cov@codeaurora.org> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> [3.5+] Signed-off-by:
-
Michal Marek authored
With commit 9da0763b (kbuild: Use relative path when building in a subdir of the source tree), the compiler messages include relative paths. These are however relative to the build directory, not the directory where make was started. Print the "Entering directory ..." message once, so that IDEs/editors can find the source files. Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Michal Marek <mmarek@suse.cz>
-
- 02 Jul, 2014 5 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
misc fixes, output fixes for 4k monitor, dpm lockup fixes * 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: page table BOs are kernel allocations drm/radeon/cik: fix typo in EOP packet drm/radeon: Track the status of a page flip more explicitly drm/radeon/dpm: fix vddci setup typo on cayman drm/radeon/dpm: fix typo in vddci setup for eg/btc drm/radeon: use RADEON_MAX_CRTCS, RADEON_MAX_AFMT_BLOCKS (v2) drm/radeon: Use only one line for whole DPCD debug output drm/radeon: add a module parameter to control deep color support drm/radeon: enable bapm by default on desktop TN/RL boards drm/radeon: enable bapm by default on KV/KB drm/radeon: only apply bapm changes for AC power on ARUBA drm/radeon: adjust default dispclk on DCE6 (v2)
-
Dave Airlie authored
1539fb9b managed to somehow +x drm_drv.c undo it. Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Avi Kivity authored
XDR requires 4-byte alignment; nfs4d READLINK reply writes out the padding, but truncates the packet to the padding-less size. Fix by taking the padding into consideration when truncating the packet. Symptoms: # ll /mnt/ ls: cannot read symbolic link /mnt/test: Input/output error total 4 -rw-r--r--. 1 root root 0 Jun 14 01:21 123456 lrwxrwxrwx. 1 root root 6 Jul 2 03:33 test drwxr-xr-x. 1 root root 0 Jul 2 23:50 tmp drwxr-xr-x. 1 root root 60 Jul 2 23:44 tree Signed-off-by:
Avi Kivity <avi@cloudius-systems.com> Fixes: 476a7b1f (nfsd4: don't treat readlink like a zero-copy operation) Reviewed-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
Christian König authored
Userspace shouldn't be able to access them. Signed-off-by:
Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Volatile bit was in the wrong location. This bit is not used at the moment. Signed-off-by:
-
- 01 Jul, 2014 14 commits
-
-
Steven Rostedt (Red Hat) authored
Disabling reading and writing to the trace file should not be able to disable all function tracing callbacks. There's other users today (like kprobes and perf). Reading a trace file should not stop those from happening. Cc: stable@vger.kernel.org # 3.0+ Reviewed-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxLinus Torvalds authored
Pull fbdev fixes from Tomi Valkeinen: "A few minor fbdev fixes for bfin_adv7393fb, omapdss, vt8500lcdfb, atmel_lcdfb" * tag 'fbdev-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: fb: adv7393: add missing semicolon video: omapdss: Fix potential null pointer dereference video: vt8500lcdfb: Remove kfree call since devm_kzalloc() is used drivers:video:fbdev atmel_lcdfb.c power GPIO registration bug
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "A bunch of one-liners (except the s390 one). The two more serious bugs ("KVM: SVM: Fix CPL export via SS.DPL" and "KVM: s390: add sie.h uapi header file to Kbuild and remove header dependency") were introduced in the 3.16 merge window" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Fix CPL export via SS.DPL KVM: s390: add sie.h uapi header file to Kbuild and remove header dependency MIPS: KVM: Fix memory leak on VCPU KVM: x86: preserve the high 32-bits of the PAT register kvm: fix wrong address when writing Hyper-V tsc page KVM: x86: Increase the number of fixed MTRR regs to 10 -
Michel Dänzer authored
This prevents a panic: radeon_crtc_handle_page_flip() could run before radeon_flip_work_func(), triggering the BUG_ON() in drm_vblank_put(). Tested-by:
Dieter Nützel <Dieter@nuetzel-hh.de> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Alex Deucher authored
We were using the vddc mask rather than the vddci mask. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=79071 May also fix: https://bugs.freedesktop.org/show_bug.cgi?id=69723 Noticed by: Dieter Nützel <Dieter@nuetzel-hh.de> Signed-off-by:
-
Alex Deucher authored
We were using the vddc mask rather than the vddci mask. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=79071 Possibly also fixes: https://bugzilla.kernel.org/show_bug.cgi?id=68571Noticed-by:
Jonathan Howard <jonathan@unbiased.name> Signed-off-by:
-
Stefan Brüns authored
v2: agd5f: compile fix Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
-
Stefan Brüns authored
Signed-off-by:
-
Alex Deucher authored
Some monitors seem to have problems with deep color enabled, even though they claim to support it. I'm not sure if the monitor need a quirk or if the driver is doing something the monitor doesn't like. At this point lets just disable deep color by default like we did for hdmi audio and work through the bugs so we can eventually enable it by default. bug: https://bugs.freedesktop.org/show_bug.cgi?id=80531Signed-off-by:
-
Alex Deucher authored
bapm enabled the GPU and CPU to share TDP headroom. It was disabled by default since some laptops hung when it was enabled in conjunction with dpm. It seems to be stable on desktop boards and fixes hangs on boot with dpm enabled on certain boards, so enable it by default on desktop boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=72921Signed-off-by:
-
Alex Deucher authored
bapm allows the GPU and CPU to share TDP. This allows for additional performance out of the GPU and CPU when the headroom is available. Signed-off-by: -
Alex Deucher authored
Newer asics shouldn't need any manual adjustment. Signed-off-by: -
Alex Deucher authored
Set the default to 600Mhz if it's not set in the bios, and bump the default to 600Mhz if it's lower than that. This fixes display issues with certain 4k DP monitors when using 5.4 Ghz DP clocks. v2: fix typo. Signed-off-by: -
Scott Jiang authored
Commit f8bd4934 by Jingoo Han introduced this problem. This makes bfin_adv7393fb.c failed to compile. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
- 30 Jun, 2014 1 commit
-
-
Oleg Nesterov authored
The usage of uprobe_buffer_enable() added by dcad1a20 is very wrong, 1. uprobe_buffer_enable() and uprobe_buffer_disable() are not balanced, _enable() should be called only if !enabled. 2. If uprobe_buffer_enable() fails probe_event_enable() should clear tp.flags and free event_file_link. 3. If uprobe_register() fails it should do uprobe_buffer_disable(). Link: http://lkml.kernel.org/p/20140627170146.GA18332@redhat.comAcked-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by:
-
