- 28 May, 2020 36 commits
-
-
Ulf Hansson authored
Using a fixed 2s timeout for all commands is a bit problematic. For some commands it means waiting longer than needed for the timer to expire, which may not a big issue, but still. For other commands, like for an erase (CMD38) that uses a R1B response, may require longer timeouts than 2s. In these cases, we may end up treating the command as it failed, while it just needed some more time to complete successfully. Fix the problem by respecting the cmd->busy_timeout, which is provided by the mmc core. Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20200414161413.3036-4-ulf.hansson@linaro.orgSigned-off-by:
-
Ulf Hansson authored
Setting the timer on a per request basis, is rather limiting as the timer really depends on what commands that is to be sent as part of the request. Therefore improve the behaviour by programming the timer per command basis instead. Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Ulf Hansson authored
When atmci_request_end() is about to finish a request for one slot, there is a possibility that there is new request queued for another slot. If this turns out to be the case, the new request is started and the timer is re-programmed for it. Although, a few lines below in atmci_request_end(), this timer becomes deleted, likely corresponding to the other recently completed request. This looks wrong, so let's fix it. Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Veerabhadrarao Badiganti authored
ADMA_ERR_SIZE_EN bit of VENDOR_SPECIFIC_FUNC register controls ADMA length mismatch error interrupt. Enable it by default. And update all bit shift defines with BIT macro. Signed-off-by:
Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1587363626-20413-4-git-send-email-vbadigan@codeaurora.orgSigned-off-by:
-
Veerabhadrarao Badiganti authored
sdhci-msm can support auto cmd12. So enable SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk. Signed-off-by:
-
Haibo Chen authored
When use one SDIO wifi which enable the runtime PM feature on i.MX6SX, we meet system hang. This hang happened during the usdhc runtime resume, in sdhci_init(), when call the sdhci_set_default_irqs. One interrupt (SDHCI_INT_CARD_INT) triggered just after the host->ier update and before the write of register SDHCI_SIGNAL_ENABLE. So in sdhci_irq, it will skip the call of sdio_signal_irq() because current host->ier do not set the SDHCI_INT_CARD_INT. So this SDIO wifi interrupt always keep triggered, let the system stuck in irq handle, can't response any other thread. This patch add spin lock for the sdhci_set_default_irqs to fix this issue. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Acked-by:
-
Baolin Wang authored
Implement the request_atomic() API for nonremovable cards, that means we can submit next request in the irq hard handler context to reduce latency. Moreover factor out the AUTO CMD23 checking into a separate function to reduce duplicate code. Signed-off-by:
Baolin Wang <baolin.wang7@gmail.com> Acked-by:
-
Baolin Wang authored
Implement the request_atomic() ops for the sdhci driver to process one request in the atomic context if the card is nonremovable. Moreover, we should return BUSY flag if controller has not released the inhibit bits to allow HSQ trying to send request again in non-atomic context. Suggested-by:
-
Baolin Wang authored
The SD host controller can process one request in the atomic context if the card is nonremovable, which means we can submit next request in the irq hard handler when using the MMC host software queue to reduce the latency. Thus this patch adds a new API request_atomic() for the host controller, as well as adding support for host software queue to submit a request by the new request_atomic() API. Moreover there is an unusual case that the card is busy when trying to send a command, and we can not polling the card status in interrupt context by using request_atomic() to dispatch requests. Thus we should queue a work to try again in the non-atomic context in case the host releases the busy signal later. Suggested-by:
-
Adrian Hunter authored
Spending time under spinlock increases IRQ latencies and also response times because preemption is disabled. sdhci_send_command() waits up to 10 ms under spinlock for inhibit bits to clear. In general inhibit bits will not be set, but there may be corner cases, especially in the face of errors, where waiting helps. There might also be dysfunctional hardware that needs the waiting. So retain the legacy behaviour but do not wait for inhibit bits while under spinlock. Instead adjust the logic to enable waiting while not under spinlock. That is mostly straight forward, but in the interrupt handler it requires deferring an "inhibited" command to the IRQ thread where sleeping is allowed. Signed-off-by:
-
Adrian Hunter authored
In preparation for further changes, tidy sdhci_request() a bit. Signed-off-by:
-
Adrian Hunter authored
sdhci_finish_data() is defined before it is referenced, so forward declaration is not necessary. Signed-off-by:
-
Adrian Hunter authored
sdhci_send_command() has not been used outside of sdhci.c for many years. Stop exporting it. Signed-off-by:
-
Adrian Hunter authored
Add 2 helper functions to make the use of the auto-CMD23 flag more readable. Signed-off-by:
-
Jisheng Zhang authored
Use the well defined HIGH_SPEED_BUS_SPEED macro in mmc_sd_switch_hs() to make code more readable. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200410145643.630b0731@xhacker.debianSigned-off-by:
-
Marek Vasut authored
Instead of reimplementing the logic in mmc_regulator_set_vqmmc(), use the mmc code function directly. This also allows us to fix a related issue on STM32MP1, when a voltage switch of 1.8V is done for the eMMC, but the current level is already set to 1.8V. More precisely, in this scenario the call to the ->post_sig_volt_switch() hangs, indefinitely waiting for the voltage switch to complete. Fix this problem by checking if mmc_regulator_set_vqmmc() returned 1 and then skip invoking the callback. Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20200416163649.336967-3-marex@denx.de [Ulf: Updated the commit message] Signed-off-by:
-
Marek Vasut authored
Adjust mmc_regulator_set_vqmmc() to return 1 if the voltage switch was skipped because the regulator voltage was already correct. This allows drivers to detect such condition and possibly skip various voltage switching extras. Signed-off-by:
-
Marek Vasut authored
Patch all drivers which use mmc_regulator_set_vqmmc() and prepare them for the fact that mmc_regulator_set_vqmmc() can return a value > 0, which would happen if the signal voltage switch did NOT happen, because the voltage was already set correctly. Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/mmc/host/sdhci-of-arasan.c:784:9: warning: variable 'ret' is uninitialized when used here [-Wuninitialized] return ret; ^~~ drivers/mmc/host/sdhci-of-arasan.c:738:9: note: initialize the variable 'ret' to silence this warning int ret; ^ = 0 drivers/mmc/host/sdhci-of-arasan.c:860:9: warning: variable 'ret' is uninitialized when used here [-Wuninitialized] return ret; ^~~ drivers/mmc/host/sdhci-of-arasan.c:810:9: note: initialize the variable 'ret' to silence this warning int ret; ^ = 0 2 warnings generated. This looks like a copy paste error. Neither function has handling that needs ret so just remove it and return 0 directly. Link: https://github.com/ClangBuiltLinux/linux/issues/996Reported-by:kernelci.org bot <bot@kernelci.org> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20200416182402.16858-1-natechancellor@gmail.comSigned-off-by:
-
Wolfram Sang authored
No need to call platform_get_resource twice when we still have the pointer from before. Also, use '%pa' for a resource_size_t pointer. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200408142252.21958-1-wsa+renesas@sang-engineering.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Wolfram Sang authored
When tuning HS400, if all TAPS are good, we can utilize the SMPCMP register to select the optimal TAP. For that, we populate a second bitmap with SMPCMP results and query it in case the regular bitmap is full (= all good). Signed-off-by:
Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Signed-off-by:
Takeshi Saito <takeshi.saito.xv@renesas.com> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
-
Wolfram Sang authored
The comment and the define about how TAPs are selected were confusing to me because the good TAP was only valid if it was bigger than a *_MAX_* value. Rename the define and adapt the comment to what really happens. Signed-off-by:
-
Wolfram Sang authored
To select the best TAP, we need to find the longest stream of set bits in a bit field. There is now a helper function for bitmaps which iterates over all region of set bits. Using it makes the code much more concise and easier to understand. Double so, because we need to handle two bitmaps in the near future. Remove a superfluous comment while here. Signed-off-by:
-
Masahiro Yamada authored
Use FIELD_GET and FIELD_PREP to get access to the register fields. Delete the shift macros and use GENMASK() for the touched macros. Note that, this has the side-effect of changing the constants to 64-bit on 64-bit platforms. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
-
Masahiro Yamada authored
In the SDHCI specification, the Capabilities Register (Offset 0x40h) is the 64-bit width register, but in Linux, it is represented as two registers, SDHCI_CAPABILITIES and SDHCI_CAPABILITIES_1 so that drivers can use 32-bit register accessors. The upper 32-bit field is associated with SDHCI_CAPABILITIES_1. Move the definition of SDHCI_CAPABILITIES_1 to the correct place. Signed-off-by:
-
Manish Narani authored
Modify code to fix the warnings reported by kernel-doc for better documentation. Signed-off-by:
Manish Narani <manish.narani@xilinx.com> Link: https://lore.kernel.org/r/1586195015-128992-7-git-send-email-manish.narani@xilinx.comSigned-off-by:
-
Manish Narani authored
The SDHCI clock operations are platform specific. So it better to define them separately for particular platform. This will prevent multiple if..else conditions and will make it easy for user to add their own clock operations handlers. Signed-off-by:
-
Manish Narani authored
Existing driver code has the platform specific structures scattered throughout the driver code. Rearrange the platform specific data structures for more modularity and readability. This will help in adding new static functions with more ease. Signed-off-by:
-
Manish Narani authored
There is 'struct sdhci_arasan_data' but also 'struct sdhci_arasan_of_data sdhci_arasan_data'. Rename the latter to avoid confusion with the name of the struct. Reported-by:
-
Manish Narani authored
Add support to set tap delays for Xilinx Versal SD controller. The tap delay registers have moved to SD controller space in Versal. Make the changes accordingly. Signed-off-by:
-
Manish Narani authored
Add documentation for 'xlnx,versal-8.9a' SDHCI controller followed by example. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1586195015-128992-2-git-send-email-manish.narani@xilinx.comSigned-off-by:
-
Ulf Hansson authored
Signed-off-by:
-
Ulf Hansson authored
The in-parameter struct mmc_data *data is never NULL, because the caller always provides a valid pointer. Hence drop the corresponding redundant code. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200407143903.22477-1-ulf.hansson@linaro.org
-
Ulf Hansson authored
The in-parameter "wait" is always set to 0 by the caller, hence just drop it and its corresponding code. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Link: https://lore.kernel.org/r/20200406114337.8802-1-ulf.hansson@linaro.org
-
Ulf Hansson authored
The MMC_CAP_ERASE and MMC_CAP_CMD23 flags are already being set in the common sdhci_setup_host(). This makes it redundant to set them for sdhci-sprd, so let's drop them. Signed-off-by:
-
Ulf Hansson authored
Instead of explicitly checking for SDIO specific requests and then returning an error code, let's set MMC_CAP2_NO_SDIO to tell the mmc core to prevent them altogether. Signed-off-by:
-
- 24 May, 2020 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: "A set of EFI fixes: - Don't return a garbage screen info when EFI framebuffer is not available - Make the early EFI console work properly with wider fonts instead of drawing garbage - Prevent a memory buffer leak in allocate_e820() - Print the firmware error record properly so it can be decoded by users - Fix a symbol clash in the host tool build which only happens with newer compilers. - Add a missing check for the event log version of TPM which caused boot failures on several Dell systems due to an attempt to decode SHA-1 format with the crypto agile algorithm" * tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tpm: check event log version before reading final events efi: Pull up arch-specific prototype efi_systab_show_arch() x86/boot: Mark global variables as static efi: cper: Add support for printing Firmware Error Record Reference efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820() efi/earlycon: Fix early printk for wider fonts efi/libstub: Avoid returning uninitialized data from setup_graphics() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Unbreak stack dumps for inactive tasks by interpreting the special first frame left by __switch_to_asm() correctly. The recent change not to skip the first frame so ORC and frame unwinder behave in the same way caused all entries to be unreliable, i.e. prepended with '?'. - Use cpumask_available() instead of an implicit NULL check of a cpumask_var_t in mmio trace to prevent a Clang build warning" * tag 'x86-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of fixes for the scheduler: - Fix handling of throttled parents in enqueue_task_fair() completely. The recent fix overlooked a corner case where the first iteration terminates due to an entity already being on the runqueue which makes the list management incomplete and later triggers the assertion which checks for completeness. - Fix a similar problem in unthrottle_cfs_rq(). - Show the correct uclamp values in procfs which prints the effective value twice instead of requested and effective" * tag 'sched-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list sched/debug: Fix requested task uclamp values shown in procfs sched/fair: Fix enqueue_task_fair() warning some more
-
