In the following patches, the requirement that ports be only enslaved to
masters without uppers, is going to be relaxed. It will therefore be
necessary to join not only RIF for the immediate LAG, as is currently the
case, but also RIFs for VLAN netdevices upper to the LAG.

In this patch, extend mlxsw_sp_netdevice_router_join_lag() to walk the
uppers of a LAG being joined, and also join any VLAN ones.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently it never happens that a netdevice that is already a bridge slave
would suddenly become mlxsw upper. The only case where this might be
possible as far as mlxsw is concerned, is with LAG netdevices. But if a LAG
has any upper (e.g. is enslaved), enlaving mlxsw port to that LAG is
forbidden. Thus the only way to install a LAG between a bridge and a mlxsw
port is by first enslaving the port to the LAG, and then enslaving that LAG
to a bridge. At that point there are no bridge objects (such as port VLANs)
to replay. Those are added afterwards, and notified as they are created.
This holds even for the PVID.

However in the following patches, the requirement that ports be only
enslaved to masters without uppers, is going to be relaxed. It will
therefore be necessary to replay the existing bridge objects. Without this
replay, e.g. the mlxsw bridge_port_vlan objects are not instantiated, which
causes issues later, as a lot of code relies on their presence.

To that end, add a new notifier block whose sole role is to filter out
events related to the one relevant upper, and forward those to the existing
switchdev notifier block. Pass the new notifier block to
switchdev_bridge_port_offload() when the bridge port is created.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently it never happens that a netdevice that is already a bridge slave
would suddenly become mlxsw upper. The only case where this might be
possible as far as mlxsw is concerned, is with LAG netdevices. But if a LAG
already has an upper, enslaving mlxsw port to that LAG is forbidden. Thus
the only way to install a LAG between a bridge and a mlxsw port is by first
enslaving the port to the LAG, and then enslaving that LAG to a bridge.

However in the following patches, the requirement that ports be only
enslaved to masters without uppers, is going to be relaxed. It will
therefore be necessary to join bridges of LAG uppers. Without this replay,
the mlxsw bridge_port objects are not instantiated, which causes issues
later, as a lot of code relies on their presence.

Therefore in this patch, when the first mlxsw physical netdevice is
enslaved to a LAG, consider bridges upper to the LAG (both the direct
master, if any, and any bridge masters of VLAN uppers), and have the
relevant netdevices join their bridges.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When handling deslavement of LAG or its upper from a bridge device, when
the deslaved netdevice has an IP address, it should join the router. This
should be done after all the lowers of the LAG have left the bridge. The
replay intended to cause the device to join the router therefore cannot be
invoked unconditionally in the event handlers themselves. It can be done
right away if the handler is invoked for a sole device, but when it is
invoked repeated for each LAG lower, the replay needs to be postponed
until after this processing is done.

To that end, add a boolean parameter, replay_deslavement, to
mlxsw_sp_netdevice_port_upper_event(), mlxsw_sp_netdevice_port_vlan_event()
and one helper on the call path. Have the invocations that are done for
sole netdevices pass true, and those done for LAG lowers pass false.

Nothing depends on this flag at this point, but it removes some noise from
the patch that introduces the replay itself.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the bridge-related handlers bail out when the event is related to
a netdevice that is not an upper of one of the front-panel ports. In order
to allow enslavement of front-panel ports to bridges that already have
uppers, it will be necessary to replay CHANGEUPPER events to validate that
the configuration is offloadable. In order for the replay to be effective,
it must be possible to ignore unsupported configuration in the context of
an actual notifier event, but to still "veto" these configurations when the
validation is performed.

To that end, introduce two parameters to a number of handlers: mlxsw_sp,
because it will not be possible to deduce that from the netdevice lowers;
and process_foreign to indicate whether netdevices that are not front panel
uppers should be validated.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the meat of mlxsw_sp_netdevice_event() to a separate function that
does just the validation. This separate helper will be possible to call
later for recursive ascent when validating attachment of a front panel port
to a bridge with uppers.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will come in handy for neighbour replay.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the IP address event handlers bail out when the event is related
to a netdevice that is a bridge port or a member of a LAG. In order to
create a RIF when a bridged or LAG'd port is unenslaved, these event
handlers will be replayed. However, at the point in time when the
NETDEV_CHANGEUPPER event is delivered, informing of the loss of
enslavement, the port is still formally enslaved.

In order for the operation to have any effect, these handlers need an extra
parameter to indicate that the check for bridge or LAG membership should
not be done. In this patch, add an argument "nomaster" to several event
handlers.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support for enslaving ports to LAGs with uppers will be added in the
following patches. Selftests to make sure it actually does the right thing
are ready and will be sent as a follow-up.

Similarly, ordering of MACVLAN creation and RIF creation will be relaxed
and it will be permitted to create a MACVLAN first.

Thus these two tests are obsolete. Drop them.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a front panel joins a bridge via another netdevice (typically a LAG),
the driver needs to learn about the objects configured on the bridge port.
When the bridge port is offloaded by the driver for the first time, this
can be achieved by passing a notifier to switchdev_bridge_port_offload().
The notifier is then invoked for the individual objects (such as VLANs)
configured on the bridge, and can look for the interesting ones.

Calling switchdev_bridge_port_offload() when the second port joins the
bridge lower is unnecessary, but the replay is still needed. To that end,
add a new function, switchdev_bridge_port_replay(), which does only the
replay part of the _offload() function in exactly the same way as that
function.

Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two kinds of MDB entries to be replayed: port MDB entries, and
host MDB entries. They are both replayed by br_switchdev_mdb_replay(). If
the driver supports one kind, but lacks the other, the first -EOPNOTSUPP
returned terminates the whole replay, including any further still-supported
objects in the list.

For this to cause issues, there must be MDB entries for both the host and
the port being replayed. In that case, if the driver bails out from
handling the host entry, the port entries are never replayed. However, the
replay is currently only done when a switchdev port joins a bridge. There
would be no port memberships at that point. Thus despite being erroneous,
the code does not cause observable bugs.

This is not an issue with other object kinds either, because there, each
function replays one object kind. If a driver does not support that kind,
it makes sense to bail out early. -EOPNOTSUPP is then ignored in
nbp_switchdev_sync_objs().

For MDB, suppress the -EOPNOTSUPP error code in br_switchdev_mdb_replay()
already, so that the whole list gets replayed.

The reason we need this patch is that a future patch will introduce a
replay that should be used when a front-panel port netdevice is enslaved to
a bridge lower, in particular a LAG. The LAG netdevice can already have
both host and port MDB entries. The port entries need to be replayed so
that they are offloaded on the port that joins the LAG.

Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce MTK_FOE_ENTRY_V{1,2}_SIZE macros in order to make more
explicit foe_entry size for different chipset revisions.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benjamin Poirier says:

====================
nexthop: Refactor and fix nexthop selection for multipath routes

In order to select a nexthop for multipath routes, fib_select_multipath()
is used with legacy nexthops and nexthop_select_path_hthr() is used with
nexthop objects. Those two functions perform a validity test on the
neighbor related to each nexthop but their logic is structured differently.
This causes a divergence in behavior and nexthop_select_path_hthr() may
return a nexthop that failed the neighbor validity test even if there was
one that passed.

Refactor nexthop_select_path_hthr() to make it more similar to
fib_select_multipath() and fix the problem mentioned above.

v1: https://lore.kernel.org/netdev/20230529201914.69828-1-bpoirier@nvidia.com/
====================

Link: https://lore.kernel.org/r/20230719-nh_select-v2-0-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add test cases for hash threshold (multipath) nexthop groups with invalid
neighbors. Check that a nexthop with invalid neighbor is not selected when
there is another nexthop with a valid neighbor. Check that there is no
crash when there is no nexthop with a valid neighbor.

The first test fails before the previous commit in this series.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230719-nh_select-v2-4-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With legacy nexthops, when net.ipv4.fib_multipath_use_neigh is set,
fib_select_multipath() will never set res->nhc to a nexthop that is not
good (as per fib_good_nh()). OTOH, with nexthop objects,
nexthop_select_path_hthr() may return a nexthop that failed the
nexthop_is_good_nh() test even if there was one that passed. Refactor
nexthop_select_path_hthr() to follow a selection logic more similar to
fib_select_multipath().

The issue can be demonstrated with the following sequence of commands. The
first block shows that things work as expected with legacy nexthops. The
last sequence of `ip rou get` in the second block shows the problem case -
some routes still use the .2 nexthop.

sysctl net.ipv4.fib_multipath_use_neigh=1
ip link add dummy1 up type dummy
ip rou add 198.51.100.0/24 nexthop via 192.0.2.1 dev dummy1 onlink nexthop via 192.0.2.2 dev dummy1 onlink
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip neigh add 192.0.2.1 dev dummy1 nud failed
echo ".1 failed:"  # results should not use .1
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip neigh del 192.0.2.1 dev dummy1
ip neigh add 192.0.2.2 dev dummy1 nud failed
echo ".2 failed:"  # results should not use .2
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip link del dummy1

ip link add dummy1 up type dummy
ip nexthop add id 1 via 192.0.2.1 dev dummy1 onlink
ip nexthop add id 2 via 192.0.2.2 dev dummy1 onlink
ip nexthop add id 1001 group 1/2
ip rou add 198.51.100.0/24 nhid 1001
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip neigh add 192.0.2.1 dev dummy1 nud failed
echo ".1 failed:"  # results should not use .1
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip neigh del 192.0.2.1 dev dummy1
ip neigh add 192.0.2.2 dev dummy1 nud failed
echo ".2 failed:"  # results should not use .2
for i in {10..19}; do ip -o rou get 198.51.100.$i; done
ip link del dummy1
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230719-nh_select-v2-3-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For legacy nexthops, there is fib_good_nh() to check the neighbor validity.
In order to make the nexthop object code more similar to the legacy nexthop
code, factor out the nexthop object neighbor validity check into its own
function.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230719-nh_select-v2-2-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The loop in nexthop_select_path_hthr() includes code to check for neighbor
validity. Since this does not apply to fdb nexthops, simplify the loop by
moving the fdb nexthop selection to its own function.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230719-nh_select-v2-1-04383e89f868@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
eth: bnxt: handle invalid Tx completions more gracefully

bnxt trusts the events generated by the device which may lead to kernel
crashes. These are extremely rare but they do happen. For a while
I thought crashing may be intentional, because device reporting invalid
completions should never happen, and having a core dump could be useful
if it does. But in practice I haven't found any clues in the core dumps,
and panic_on_warn exists.

Series was tested by forcing the recovery path manually. Because of
how rare the real crashes are I can't confirm it works for the actual
device errors until it's been widely deployed.

v1: https://lore.kernel.org/all/20230710205611.1198878-1-kuba@kernel.org/
====================

Link: https://lore.kernel.org/r/20230720010440.1967136-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Invalid Tx completions should never happen (tm) but when they do
they crash the host, because driver blindly trusts that there is
a valid skb pointer on the ring.

The completions I've seen appear to be some form of FW / HW
miscalculation or staleness, they have typical (small) values
(<100), but they are most often higher than number of queued
descriptors. They usually happen after boot.

Instead of crashing, print a warning and schedule a reset.

Link: https://lore.kernel.org/r/20230720010440.1967136-4-kuba@kernel.orgReviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Most callers of bnxt_queue_sp_work() set a bit to indicate what work
to perform right before calling it. Pass it to the function instead.

Link: https://lore.kernel.org/r/20230720010440.1967136-3-kuba@kernel.orgReviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move the reset helpers, subsequent patches will need some
of them on the Tx path.

While at it rename bnxt_sched_reset(), on more recent chips
it schedules a queue reset, instead of a fuller reset.

Link: https://lore.kernel.org/r/20230720010440.1967136-2-kuba@kernel.orgReviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from BPF, netfilter, bluetooth and CAN.

  Current release - regressions:

   - eth: r8169: multiple fixes for PCIe ASPM-related problems

   - vrf: fix RCU lockdep splat in output path

  Previous releases - regressions:

   - gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set

   - dsa: mv88e6xxx: do a final check before timing out when polling

   - nf_tables: fix sleep in atomic in nft_chain_validate

  Previous releases - always broken:

   - sched: fix undoing tcf_bind_filter() in multiple classifiers

   - bpf, arm64: fix BTI type used for freplace attached functions

   - can: gs_usb: fix time stamp counter initialization

   - nft_set_pipapo: fix improper element removal (leading to UAF)

  Misc:

   - net: support STP on bridge in non-root netns, STP prevents packet
     loops so not supporting it results in freezing systems of
     unsuspecting users, and in turn very upset noises being made

   - fix kdoc warnings

   - annotate various bits of TCP state to prevent data races"

* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
  net: phy: prevent stale pointer dereference in phy_init()
  tcp: annotate data-races around fastopenq.max_qlen
  tcp: annotate data-races around icsk->icsk_user_timeout
  tcp: annotate data-races around tp->notsent_lowat
  tcp: annotate data-races around rskq_defer_accept
  tcp: annotate data-races around tp->linger2
  tcp: annotate data-races around icsk->icsk_syn_retries
  tcp: annotate data-races around tp->keepalive_probes
  tcp: annotate data-races around tp->keepalive_intvl
  tcp: annotate data-races around tp->keepalive_time
  tcp: annotate data-races around tp->tsoffset
  tcp: annotate data-races around tp->tcp_tx_delay
  Bluetooth: MGMT: Use correct address for memcpy()
  Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
  Bluetooth: SCO: fix sco_conn related locking and validity issues
  Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
  Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
  Bluetooth: coredump: fix building with coredump disabled
  Bluetooth: ISO: fix iso_conn related locking and validity issues
  Bluetooth: hci_event: call disconnect callback before deleting conn
  ...

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix building with coredump disabled
 - Fix use-after-free in hci_remove_adv_monitor
 - Use RCU for hci_conn_params and iterate safely in hci_sync
 - Fix locking issues on ISO and SCO
 - Fix bluetooth on Intel Macbook 2014

* tag 'for-net-2023-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: MGMT: Use correct address for memcpy()
  Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
  Bluetooth: SCO: fix sco_conn related locking and validity issues
  Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
  Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
  Bluetooth: coredump: fix building with coredump disabled
  Bluetooth: ISO: fix iso_conn related locking and validity issues
  Bluetooth: hci_event: call disconnect callback before deleting conn
  Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync
====================

Link: https://lore.kernel.org/r/20230720190201.446469-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Westphal says:

====================
Netfilter fixes for net:

The following patchset contains Netfilter fixes for net:

1. Fix spurious -EEXIST error from userspace due to
   padding holes, this was broken since 4.9 days
   when 'ignore duplicate entries on insert' feature was
   added.

2. Fix a sched-while-atomic bug, present since 5.19.

3. Properly remove elements if they lack an "end range".
   nft userspace always sets an end range attribute, even
   when its the same as the start, but the abi doesn't
   have such a restriction. Always broken since it was
   added in 5.6, all three from myself.

4 + 5: Bound chain needs to be skipped in netns release
   and on rule flush paths, from Pablo Neira.

* tag 'nf-23-07-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: skip bound chain on rule flush
  netfilter: nf_tables: skip bound chain in netns release path
  netfilter: nft_set_pipapo: fix improper element removal
  netfilter: nf_tables: can't schedule in nft_chain_validate
  netfilter: nf_tables: fix spurious set element insertion failure
====================

Link: https://lore.kernel.org/r/20230720165143.30208-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).

It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.

Fixes: 55d8f053 ("net: phy: Register ethtool PHY operations")
Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
tcp: add missing annotations

This series was inspired by one syzbot (KCSAN) report.

do_tcp_getsockopt() does not lock the socket, we need to
annotate most of the reads there (and other places as well).

This is a first round, another series will come later.
====================

Link: https://lore.kernel.org/r/20230719212857.3943972-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This field can be read locklessly.

Fixes: 1536e285 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This field can be read locklessly from do_tcp_getsockopt()

Fixes: dca43c75 ("tcp: Add TCP_USER_TIMEOUT socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-11-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tp->notsent_lowat can be read locklessly from do_tcp_getsockopt()
and tcp_poll().

Fixes: c9bee3b7 ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads rskq_defer_accept while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-9-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->linger2 while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-8-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() and reqsk_timer_handler() read
icsk->icsk_syn_retries while another cpu might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-7-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->keepalive_probes while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-5-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->keepalive_time while another cpu
might change its value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-4-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->tsoffset while another cpu
might change its value.

Fixes: 93be6ce0 ("tcp: set and get per-socket timestamp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-3-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

do_tcp_getsockopt() reads tp->tcp_tx_delay while another cpu
might change its value.

Fixes: a842fe14 ("tcp: add optional per socket transmit delay")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-2-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In function ‘fortify_memcpy_chk’,
    inlined from ‘get_conn_info_complete’ at net/bluetooth/mgmt.c:7281:2:
include/linux/fortify-string.h:592:25: error: call to
‘__read_overflow2_field’ declared with attribute warning: detected read
beyond size of field (2nd parameter); maybe use struct_group()?
[-Werror=attribute-warning]
  592 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

This is due to the wrong member is used for memcpy(). Use correct one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Commit c13380a5 ("Bluetooth: btusb: Do not require hardcoded
interface numbers") inadvertedly broke bluetooth on Intel Macbook 2014.
The intention was to keep behavior intact when BTUSB_IFNUM_2 is set and
otherwise allow any interface numbers. The problem is that the new logic
condition omits the case where bInterfaceNumber is 0.

Fix BTUSB_IFNUM_2 handling by allowing both interface number 0 and 2
when the flag is set.

Fixes: c13380a5 ("Bluetooth: btusb: Do not require hardcoded interface numbers")
Reported-by: John Holland <johnbholland@icloud.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217651Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Tested-by: John Holland<johnbholland@icloud.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>