This patch adds the ability for components to expose supported rotations
which will be exposed to userspace via a plane rotation property.

No functional changes in this patch.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This allows components to implement a .layer_check callback for their
layers which is called during atomic_check.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Instead of hard-coding which components have planes, add a helper
function to walk the components and map a plane index to a component
layer.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Add a couple of functions which enumerate the number of planes for a
component and initialize the planes for a component.

No functional changes in this patch, but it will allow us to selectively
support rotation if the component supports it.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

These formats are handled in the rdma code, but for some reason they're
not published as supported formats for the planes. So add them to the
list.

Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Daniele Castagna <dcastagna@chromium.org>
Cc: Miguel Casas <mcasas@chromium.org>
Tested-by: Miguel Casas <mcasas@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Mutex has no clock in some SoC, so add no_clk in private data and get
clock according to no_clk.
Signed-off-by: CK Hu <ck.hu@mediatek.com>

mutex sof register offset will be private data of ddp
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

mutex sof will be ddp private data
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

mutex mod register offset will be private data of ddp.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

except mutex mod, mutex mod reg,mutex sof reg,
and mutex sof id will be ddp private data
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add ovl0/ovl_2l0 usecase
in ovl->ovl_2l0 direct link usecase:
1. the crtc support layer number will 4+2
2. ovl_2l0 background color input select ovl0 when crtc init
and disable it when crtc finish
3. config ovl_2l0 layer, if crtc config layer number is
bigger than ovl0 support layers(max is 4)
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

distinguish ovl and ovl_2l by layer_nr when get comp
id
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add background color input select function for ovl/ovl_2l

ovl include 4 DRAM layer and 1 background color layer
ovl_2l include 4 DRAM layer and 1 background color layer
DRAM layer frame buffer data from render hardware, GPU for example.
backgournd color layer is embed in ovl/ovl_2l, we can only set
it color, but not support DRAM frame buffer.

for ovl0->ovl0_2l direct link usecase,
we need set ovl0_2l background color intput select from ovl0
if render send DRAM buffer layer number <=4, all these layer read
by ovl.
layer0 is at the bottom of all layers.
layer3 is at the top of all layers.
if render send DRAM buffer layer numbfer >=4 && <=6
ovl0 read layer0~3
ovl0_2l read layer4~5
layer5 is at the top ot all these layers.

the decision of how to setting ovl0/ovl0_2l read these layer data
is controlled in mtk crtc, which will be another patch
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add function to background color input select for ovl/ovl_2l
direct link for ovl/ovl_2l direct link usecase, we need set background
color input select for these hardware. This is preparation patch for
ovl/ovl_2l usecase.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add layer_nr for ovl private data
ovl_2l almost same with with ovl hardware, except the
layer number for ovl_2l is 2 and ovl is 4.
this patch is a preparation for ovl-2l and
ovl share the same driver.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add gmc_bits for ovl private data
GMC register was set RDMA ultra and pre-ultra threshold.
10bit GMC register define is different with other SOC, gmc_thrshd_l not
used.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add component OVL_2L1
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add component OVL_2L0
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add component DITHER
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add ddp component CCORR
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add mutex description for mt8183 display
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Update device tree binding documention for the display subsystem for
Mediatek MT8183 SOCs
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Update device tree binding documention for the display subsystem for
Mediatek MT8183 SOCs
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Update device tree binding documention for the display subsystem for
Mediatek MT8183 SOCs
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Add dphy reset after setting lanes number to avoid dphy fifo effor.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

mtk_mipi_tx is the phy of mtk_dsi.
mtk_dsi get the phy(mtk_mipi_tx) in probe().

So,  mtk_mipi_tx init should be ahead of mtk_dsi. Or mtk_dsi will
defer to wait mtk_mipi_tx probe done.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Change the method of frame rate calc which can get more accurate
frame rate.

data rate = pixel_clock * bit_per_pixel / lanes
Adjust hfp_wc to adapt the additional phy_data

if MIPI_DSI_MODE_VIDEO_BURST
	hfp_wc = hfp * bpp - data_phy_cycles * lanes - 12 - 6;
else
	hfp_wc = hfp * bpp - data_phy_cycles * lanes - 12;

Note:
//(2: 1 for sync, 1 for phy idle)
data_phy_cycles = T_hs_exit + T_lpx + T_hs_prepare + T_hs_zero + 2;

bpp: bit per pixel
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Tested-by: Ryan Case <ryandcase@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Add mt8183 dsi driver data. Enable size control and
reg commit control.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Our new DSI chip has frame size control.
So add the driver data to control for different chips.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

New DSI IP has shadow register and working reg. The register
values are writen to shadow register. And then trigger with
commit reg, the register values will be moved working register.

This function is default on. But this driver doesn't use this
function. So add the disable control.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

The writeb() is unavailable in mt8173. Because the mt8173 dsi module
doesn't support 8bit mode access.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Config the different CMDQ reg address in driver data.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

DSI panel driver need attach function which is include in
mipi_dsi_host_ops.

If mipi_dsi_host_register is not in probe, dsi panel will
probe more delay.

So move the mipi_dsi_host_register to probe from bind.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch add mt8183 mipi_tx driver.
And also support other chips that use the same binding and driver.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Different IC has different mipi_tx setting of dsi.
This patch separates the mipi_tx hardware relate part for mt8173.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Update device tree binding documentation for the dsi for
Mediatek MT8183 SoCs.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Pull btrfs fixes from David Sterba:
 "A bunch of fixes that accumulated in recent weeks, mostly material for
  stable.

  Summary:

   - fix for regression from 5.3 that prevents to use balance convert
     with single profile

   - qgroup fixes: rescan race, accounting leak with multiple writers,
     potential leak after io failure recovery

   - fix for use after free in relocation (reported by KASAN)

   - other error handling fixups"

* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
  btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
  btrfs: Fix a regression which we can't convert to SINGLE profile
  btrfs: relocation: fix use-after-free on dead relocation roots
  Btrfs: fix race setting up and completing qgroup rescan workers
  Btrfs: fix missing error return if writeback for extent buffer never started
  btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
  Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

Pull csky updates from Guo Ren:
 "This round of csky subsystem just some fixups:

   - Fix mb() synchronization problem

   - Fix dma_alloc_coherent with PAGE_SO attribute

   - Fix cache_op failed when cross memory ZONEs

   - Optimize arch_sync_dma_for_cpu/device with dma_inv_range

   - Fix ioremap function losing

   - Fix arch_get_unmapped_area() implementation

   - Fix defer cache flush for 610

   - Support kernel non-aligned access

   - Fix 610 vipt cache flush mechanism

   - Fix add zero_fp fixup perf backtrace panic

   - Move static keyword to the front of declaration

   - Fix csky_pmu.max_period assignment

   - Use generic free_initrd_mem()

   - entry: Remove unneeded need_resched() loop"

* tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux:
  csky: Move static keyword to the front of declaration
  csky: entry: Remove unneeded need_resched() loop
  csky: Fixup csky_pmu.max_period assignment
  csky: Fixup add zero_fp fixup perf backtrace panic
  csky: Use generic free_initrd_mem()
  csky: Fixup 610 vipt cache flush mechanism
  csky: Support kernel non-aligned access
  csky: Fixup defer cache flush for 610
  csky: Fixup arch_get_unmapped_area() implementation
  csky: Fixup ioremap function losing
  csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range
  csky/dma: Fixup cache_op failed when cross memory ZONEs
  csky: Fixup dma_alloc_coherent with PAGE_SO attribute
  csky: Fixup mb() synchronization problem

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks