- 26 Oct, 2013 24 commits
-
-
Anton Blanchard authored
commit 230aef7a upstream. Normally when we haven't implemented an alignment handler for a load or store instruction the process will be terminated. The alignment handler uses the DSISR (or a pseudo one) to locate the right handler. Unfortunately ldbrx and stdbrx overlap lfs and stfs so we incorrectly think ldbrx is an lfs and stdbrx is an stfs. This bug is particularly nasty - instead of terminating the process we apply an incorrect fixup and continue on. With more and more overlapping instructions we should stop creating a pseudo DSISR and index using the instruction directly, but for now add a special case to catch ldbrx/stdbrx. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Oliver Neukum authored
commit 6dd433e6 upstream. Both could want to submit the same URB. Some checks of the flag intended to prevent that were missing. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Hans de Goede authored
commit b4f17a48 upstream. While reading the config parsing code I noticed this check is missing, without this check config->desc.wTotalLength can end up with a value larger then the dev->rawdescriptors length for the config, and when userspace then tries to get the rawdescriptors bad things may happen. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
majianpeng authored
commit 73d9f7ee upstream. For nofail == false request, if __map_request failed, the caller does cleanup work, like releasing the relative pages. It doesn't make any sense to retry this request. Signed-off-by:
Jianpeng Ma <majianpeng@gmail.com> Reviewed-by:
Sage Weil <sage@inktank.com> [bwh: Backported to 3.2: adjust indentation] Signed-off-by:
-
Felix Fietkau authored
commit 026d5b07 upstream. Otherwise in some cases, EAPOL frames might be filtered during the initial handshake, causing delays and assoc failures. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Roger Pau Monne authored
commit 5f338d90 upstream. With the current implementation, the callback in the tail of the list can be added twice, because the check done in gnttab_request_free_callback is bogus, callback->next can be NULL if it is the last callback in the list. If we add the same callback twice we end up with an infinite loop, were callback == callback->next. Replace this check with a proper one that iterates over the list to see if the callback has already been added. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by:
Matt Wilson <msw@amazon.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Manoj Chourasia authored
commit 212a871a upstream. This changes puts the commit 4fe9f8e2 back in place with the fixes for slab corruption because of the commit. When a device is unplugged, wait for all processes that have opened the device to close before deallocating the device. This commit was solving kernel crash because of the corruption in rb tree of vmalloc. The rootcause was the device data pointer was geting excessed after the memory associated with hidraw was freed. The commit 4fe9f8e2 was buggy as it was also freeing the hidraw first and then calling delete operation on the list associated with that hidraw leading to slab corruption. Signed-off-by:
Manoj Chourasia <mchourasia@nvidia.com> Tested-by:
Peter Wu <lekensteyn@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit df0cfd69 upstream. This basically reverts commit 4fe9f8e2. It causes multiple problems, namely: - after rmmod/modprobe cycle of bus driver, the input is not claimed any more. This is likely because of misplaced hid_hw_close() - it causes memory corruption on hidraw_list As original patch author is not responding to requests to fix his patch, and the original deallocation mechanism is not exposing any problems, I am reverting back to it. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 55432d2b ] commit 5faa5df1 (inetpeer: Invalidate the inetpeer tree along with the routing cache) added a race : Before freeing an inetpeer, we must respect a RCU grace period, and make sure no user will attempt to increase refcnt. inetpeer_invalidate_tree() waits for a RCU grace period before inserting inetpeer tree into gc_list and waking the worker. At that time, no concurrent lookup can find a inetpeer in this tree. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 5faa5df1 ] We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by:
-
Ying Xue authored
[ Upstream commit 4225a398 ] When the lockdep validator is enabled, it will report the below warning when we enable a TIPC bearer: [ INFO: possible irq lock inversion dependency detected ] --------------------------------------------------------- Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(ptype_lock); local_irq_disable(); lock(tipc_net_lock); lock(ptype_lock); <Interrupt> lock(tipc_net_lock); *** DEADLOCK *** the shortest dependencies between 2nd lock and 1st lock: -> (ptype_lock){+.+...} ops: 10 { [...] SOFTIRQ-ON-W at: [<c1089418>] __lock_acquire+0x528/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c182da75>] arp_init+0x1a/0x48 [<c182dce5>] inet_init+0x181/0x27e [<c1001114>] do_one_initcall+0x34/0x170 [<c17f7329>] kernel_init+0x110/0x1b2 [<c155b6a2>] kernel_thread_helper+0x6/0x10 [...] ... key at: [<c17e4b10>] ptype_lock+0x10/0x20 ... acquired at: [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c8bc18d2>] enable_bearer+0xf2/0x140 [tipc] [<c8bb283a>] tipc_enable_bearer+0x1ba/0x450 [tipc] [<c8bb3a04>] tipc_cfg_do_cmd+0x5c4/0x830 [tipc] [<c8bbc032>] handle_cmd+0x42/0xd0 [tipc] [<c148e802>] genl_rcv_msg+0x232/0x280 [<c148d3f6>] netlink_rcv_skb+0x86/0xb0 [<c148e5bc>] genl_rcv+0x1c/0x30 [<c148d144>] netlink_unicast+0x174/0x1f0 [<c148ddab>] netlink_sendmsg+0x1eb/0x2d0 [<c1456bc1>] sock_aio_write+0x161/0x170 [<c1135a7c>] do_sync_write+0xac/0xf0 [<c11360f6>] vfs_write+0x156/0x170 [<c11361e2>] sys_write+0x42/0x70 [<c155b0df>] sysenter_do_call+0x12/0x38 [...] } -> (tipc_net_lock){+..-..} ops: 4 { [...] IN-SOFTIRQ-R at: [<c108953a>] __lock_acquire+0x64a/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c15541cd>] _raw_read_lock_bh+0x3d/0x50 [<c8bb874d>] tipc_recv_msg+0x1d/0x830 [tipc] [<c8bc195f>] recv_msg+0x3f/0x50 [tipc] [<c146a5fa>] __netif_receive_skb+0x22a/0x590 [<c146ab0b>] netif_receive_skb+0x2b/0xf0 [<c13c43d2>] pcnet32_poll+0x292/0x780 [<c146b00a>] net_rx_action+0xfa/0x1e0 [<c103a4be>] __do_softirq+0xae/0x1e0 [...] } >From the log, we can see three different call chains between CPU0 and CPU1: Time 0 on CPU0: kernel_init()->inet_init()->dev_add_pack() At time 0, the ptype_lock is held by CPU0 in dev_add_pack(); Time 1 on CPU1: tipc_enable_bearer()->enable_bearer()->dev_add_pack() At time 1, tipc_enable_bearer() first holds tipc_net_lock, and then wants to take ptype_lock to register TIPC protocol handler into the networking stack. But the ptype_lock has been taken by dev_add_pack() on CPU0, so at this time the dev_add_pack() running on CPU1 has to be busy looping. Time 2 on CPU0: netif_receive_skb()->recv_msg()->tipc_recv_msg() At time 2, an incoming TIPC packet arrives at CPU0, hence tipc_recv_msg() will be invoked. In tipc_recv_msg(), it first wants to hold tipc_net_lock. At the moment, below scenario happens: On CPU0, below is our sequence of taking locks: lock(ptype_lock)->lock(tipc_net_lock) On CPU1, our sequence of taking locks looks like: lock(tipc_net_lock)->lock(ptype_lock) Obviously deadlock may happen in this case. But please note the deadlock possibly doesn't occur at all when the first TIPC bearer is enabled. Before enable_bearer() -- running on CPU1 does not hold ptype_lock, so the TIPC receive handler (i.e. recv_msg()) is not registered successfully via dev_add_pack(), so the tipc_recv_msg() cannot be called by recv_msg() even if a TIPC message comes to CPU0. But when the second TIPC bearer is registered, the deadlock can perhaps really happen. To fix it, we will push the work of registering TIPC protocol handler into workqueue context. After the change, both paths taking ptype_lock are always in process contexts, thus, the deadlock should never occur. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Jiri Bohac authored
[ Upstream commit 61e76b17 ] RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination unreachable) messages: 5 - Source address failed ingress/egress policy 6 - Reject route to destination Now they are treated as protocol error and icmpv6_err_convert() converts them to EPROTO. RFC 4443 says: "Codes 5 and 6 are more informative subsets of code 1." Treat codes 5 and 6 as code 1 (EACCES) Btw, connect() returning -EPROTO confuses firefox, so that fallback to other/IPv4 addresses does not work: https://bugzilla.mozilla.org/show_bug.cgi?id=910773Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 2d98c29b ] While looking into MLDv1/v2 code, I noticed that bridging code does not convert it's max delay into jiffies for MLDv2 messages as we do in core IPv6' multicast code. RFC3810, 5.1.3. Maximum Response Code says: The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: [...] As we update timers that work with jiffies, we need to convert it. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Thomas Graf authored
[ Upstream commit 25a6e6b8 ] Allocating skbs when sending out neighbour discovery messages currently uses sock_alloc_send_skb() based on a per net namespace socket and thus share a socket wmem buffer space. If a netdevice is temporarily unable to transmit due to carrier loss or for other reasons, the queued up ndisc messages will cosnume all of the wmem space and will thus prevent from any more skbs to be allocated even for netdevices that are able to transmit packets. The number of neighbour discovery messages sent is very limited, use of alloc_skb() bypasses the socket wmem buffer size enforcement while the manual call to skb_set_owner_w() maintains the socket reference needed for the IPv6 output path. This patch has orginally been posted by Eric Dumazet in a modified form. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Fabio Estevam <festevam@gmail.com> Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Tested-by:
Stephen Warren <swarren@nvidia.com> Acked-by:
-
Hannes Frederic Sowa authored
[ Upstream commit f46078cf ] It is not allowed for an ipv6 packet to contain multiple fragmentation headers. So discard packets which were already reassembled by fragmentation logic and send back a parameter problem icmp. The updates for RFC 6980 will come in later, I have to do a bit more research here. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 4b08a8f1 ] Because of the max_addresses check attackers were able to disable privacy extensions on an interface by creating enough autoconfigured addresses: <http://seclists.org/oss-sec/2012/q4/292> But the check is not actually needed: max_addresses protects the kernel to install too many ipv6 addresses on an interface and guards addrconf_prefix_rcv to install further addresses as soon as this limit is reached. We only generate temporary addresses in direct response of a new address showing up. As soon as we filled up the maximum number of addresses of an interface, we stop installing more addresses and thus also stop generating more temp addresses. Even if the attacker tries to generate a lot of temporary addresses by announcing a prefix and removing it again (lifetime == 0) we won't install more temp addresses, because the temporary addresses do count to the maximum number of addresses, thus we would stop installing new autoconfigured addresses when the limit is reached. This patch fixes CVE-2013-0343 (but other layer-2 attacks are still possible). Thanks to Ding Tianhong to bring this topic up again. Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: George Kargiotakis <kargig@void.gr> Cc: P J P <ppandit@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 15718ea0 ] The recent fix d9bf5f13 "tun: compare with 0 instead of total_len" is not totally correct. Because "len" and "sizeof()" are size_t type, that means they are never less than zero. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Neil Horman authored
[ Upstream commits cf3c4c03 and d06f5187 (the latter is a fixup from Dave Jones) ] Self explanitory dma_mapping_error addition to the 8139 driver, based on this: https://bugzilla.redhat.com/show_bug.cgi?id=947250 It showed several backtraces arising for dma_map_* usage without checking the return code on the mapping. Add the check and abort the rx/tx operation if its failed. Untested as I have no hardware and the reporter has wandered off, but seems pretty straightforward. Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 3e3be275 ] In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by:
Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit cd6b423a ] While investigating about strange increase of retransmit rates on hosts ~24 days after boot, Van found hystart was disabled if ca->epoch_start was 0, as following condition is true when tcp_time_stamp high order bit is set. (s32)(tcp_time_stamp - ca->epoch_start) < HZ Quoting Van : At initialization & after every loss ca->epoch_start is set to zero so I believe that the above line will turn off hystart as soon as the 2^31 bit is set in tcp_time_stamp & hystart will stay off for 24 days. I think we've observed that cubic's restart is too aggressive without hystart so this might account for the higher drop rate we observe. Diagnosed-by:
Van Jacobson <vanj@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2ed0edf9 ] commit 17a6e9f1 ("tcp_cubic: fix clock dependency") added an overflow error in bictcp_update() in following code : /* change the unit from HZ to bictcp_HZ */ t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) - ca->epoch_start) << BICTCP_HZ) / HZ; Because msecs_to_jiffies() being unsigned long, compiler does implicit type promotion. We really want to constrain (tcp_time_stamp - ca->epoch_start) to a signed 32bit value, or else 't' has unexpected high values. This bugs triggers an increase of retransmit rates ~24 days after boot [1], as the high order bit of tcp_time_stamp flips. [1] for hosts with HZ=1000 Big thanks to Van Jacobson for spotting this problem. Diagnosed-by:
-
Eric Dumazet authored
[ Upstream commit aab515d7 ] AddressSanitizer [1] dynamic checker pointed a potential out of bound access in leaf_walk_rcu() We could allocate one more slot in tnode_new() to leave the prefetch() in-place but it looks not worth the pain. Bug added in commit 82cfbb00 ("[IPV4] fib_trie: iterator recode") [1] : https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernelReported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Roman Gushchin authored
[ Upstream commit 5f671d6b ] It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Reported-by:
Changli Gao <xiaosuo@gmail.com> Suggested-by:
-
stephen hemminger authored
[ Upstream commit cbd37556 ] When userspace passes a large priority value the assignment of the unsigned value hopt->prio to signed int cl->prio causes cl->prio to become negative and the comparison is with TC_HTB_NUMPRIO is always false. The result is that HTB crashes by referencing outside the array when processing packets. With this patch the large value wraps around like other values outside the normal range. See: https://bugzilla.kernel.org/show_bug.cgi?id=60669Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
-
- 10 Sep, 2013 16 commits
-
-
Ben Hutchings authored
-
David Vrabel authored
commit 3bc38cbc upstream. If there are UNUSABLE regions in the machine memory map, dom0 will attempt to map them 1:1 which is not permitted by Xen and the kernel will crash. There isn't anything interesting in the UNUSABLE region that the dom0 kernel needs access to so we can avoid making the 1:1 mapping and treat it as RAM. We only do this for dom0, as that is where tboot case shows up. A PV domU could have an UNUSABLE region in its pseudo-physical map and would need to be handled in another patch. This fixes a boot failure on hosts with tboot. tboot marks a region in the e820 map as unusable and the dom0 kernel would attempt to map this region and Xen does not permit unusable regions to be mapped by guests. (XEN) 0000000000000000 - 0000000000060000 (usable) (XEN) 0000000000060000 - 0000000000068000 (reserved) (XEN) 0000000000068000 - 000000000009e000 (usable) (XEN) 0000000000100000 - 0000000000800000 (usable) (XEN) 0000000000800000 - 0000000000972000 (unusable) tboot marked this region as unusable. (XEN) 0000000000972000 - 00000000cf200000 (usable) (XEN) 00000000cf200000 - 00000000cf38f000 (reserved) (XEN) 00000000cf38f000 - 00000000cf3ce000 (ACPI data) (XEN) 00000000cf3ce000 - 00000000d0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fe000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000630000000 (usable) Signed-off-by:
-
Dominik Dingel authored
commit 2b29a9fd upstream. Any uaccess between guest_enter and guest_exit could trigger a page fault, the page fault handler would handle it as a guest fault and translate a user address as guest address. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.2: adjust context and add the rc variable] Signed-off-by:
-
Nicholas Bellinger authored
commit ee60bddb upstream. This patch fixes spc_emulate_inquiry_std() to add trailing ASCII spaces for INQUIRY vendor + model fields following SPC-4 text: "ASCII data fields described as being left-aligned shall have any unused bytes at the end of the field (i.e., highest offset) and the unused bytes shall be filled with ASCII space characters (20h)." This addresses a problem with Falconstor NSS multipathing. Reported-by:
Tomas Molota <tomas.molota@lightstorm.sk> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2, based on Nicholas's versions for 3.0 and 3.4] Signed-off-by:
-
Takashi Iwai authored
commit fb615499 upstream. The recent commit to delay the release of kobject triggered NULL dereferences of opti9xx drivers. The cause is that all snd-opti92x-ad1848, snd-opti92x-cs4231 and snd-opti93x drivers register the PnP card driver with the very same name, and also snd-opti92x-ad1848 and -cs4231 drivers register the ISA driver with the same name, too. When these drivers are built in, quick "register-release-and-re-register" actions occur, and this results in Oops because of the same name is assigned to the kobject. The fix is simply to assign individual names. As a bonus, by using KBUILD_MODNAME, the patch reduces more lines than it adds. The fix is based on the suggestion by Russell King. Reported-and-tested-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David S. Miller authored
commit 74c7b289 upstream. Otherwise if no references exist in the static kernel image, we won't export the symbol properly to modules. Signed-off-by:
-
Sam Ravnborg authored
commit de36e66d upstream. Based on copy from microblaze add ucmpdi2 implementation. This fixes build of niu driver which failed with: drivers/built-in.o: In function `niu_get_nfc': niu.c:(.text+0x91494): undefined reference to `__ucmpdi2' This driver will never be used on a sparc32 system, but patch added to fix build breakage with all*config builds. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Michal Simek authored
commit 8cf662ed upstream. Old Microblaze toolchain supported "b" contstrains for all register but it always points to general purpose reg. New Microblaze toolchain is more strict in this and general purpose register should be used there "r". Signed-off-by:
Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Geert Uytterhoeven authored
commit 9a75c6e5 upstream. Fix the m32r compile error: arch/m32r/boot/compressed/misc.c:31:14: error: static declaration of 'memset' follows non-static declaration make[5]: *** [arch/m32r/boot/compressed/misc.o] Error 1 make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2 by removing the static keyword. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit a8abbca6 upstream. Fix the m32r link error: LD arch/m32r/boot/compressed/vmlinux arch/m32r/boot/compressed/misc.o: In function `zlib_updatewindow': misc.c:(.text+0x190): undefined reference to `memcpy' misc.c:(.text+0x190): relocation truncated to fit: R_M32R_26_PLTREL against undefined symbol `memcpy' make[5]: *** [arch/m32r/boot/compressed/vmlinux] Error 1 by adding our own implementation of memcpy(). Signed-off-by:
-
Geert Uytterhoeven authored
commit df12aef6 upstream. Commit a556bec9 ("m32r: fix arch/m32r/boot/compressed/Makefile") changed "$(suffix_y)" to "$(suffix-y)", but didn't update any location where "suffix_y" is set, causing: make[5]: *** No rule to make target `arch/m32r/boot/compressed/vmlinux.bin.', needed by `arch/m32r/boot/compressed/piggy.o'. Stop. make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2 make[3]: *** [zImage] Error 2 Correct the other locations to fix this. Signed-off-by:
-
Paul Gortmaker authored
commit cd0a2bfb upstream. Otherwise we get this link failure for frv's defconfig: LD .tmp_vmlinux1 drivers/built-in.o: In function `pci_assign_resource': (.text+0xbf0c): undefined reference to `pci_cardbus_resource_alignment' drivers/built-in.o: In function `pci_setup': pci.c:(.init.text+0x174): undefined reference to `pci_realloc_get_opt' pci.c:(.init.text+0x1a0): undefined reference to `pci_realloc_get_opt' make[1]: *** [.tmp_vmlinux1] Error 1 Cc: David Howells <dhowells@redhat.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Radu Caragea authored
commit 41aacc1e upstream. This is the updated version of df54d6fa ("x86 get_unmapped_area(): use proper mmap base for bottom-up direction") that only randomizes the mmap base address once. Signed-off-by:
Radu Caragea <sinaelgl@gmail.com> Reported-and-tested-by:
Jeff Shorey <shoreyjeff@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Adrian Sendroiu <molecula2788@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Jakob Bornecrantz authored
commit 6e4dcff3 upstream. This fixes the piglit test texturing/max-texture-size causing the VM to die due to a too large SVGA command. Signed-off-by:
Jakob Bornecrantz <jakob@vmware.com> Reviewed-by:
Biran Paul <brianp@vmware.com> Reviewed-by:
Zack Rusin <zackr@vmware.com> Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Imre Deak authored
commit 77fa4cbd upstream. Fix the typo introduced in commit 1a2eb460 Author: Keith Packard <keithp@keithp.com> Date: Wed Nov 16 16:26:07 2011 -0800 drm/i915: Hook up Ivybridge eDP This fixes eDP link-training failures and cases where all voltage swing /pre-emphasis levels were tried and failed during clock recovery and - as a fallback - we go on to do channel equalization with the last voltage swing/pre-emphasis level which will succeed. Both issues can lead to a blank screen. v2: - improve commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880Tested-by:
Jeremy Moles <cubicool@gmail.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Tejun Heo authored
commit b22ce278 upstream. If !PREEMPT, a kworker running work items back to back can hog CPU. This becomes dangerous when a self-requeueing work item which is waiting for something to happen races against stop_machine. Such self-requeueing work item would requeue itself indefinitely hogging the kworker and CPU it's running on while stop_machine would wait for that CPU to enter stop_machine while preventing anything else from happening on all other CPUs. The two would deadlock. Jamie Liu reports that this deadlock scenario exists around scsi_requeue_run_queue() and libata port multiplier support, where one port may exclude command processing from other ports. With the right timing, scsi_requeue_run_queue() can end up requeueing itself trying to execute an IO which is asked to be retried while another device has an exclusive access, which in turn can't make forward progress due to stop_machine. Fix it by invoking cond_resched() after executing each work item. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Jamie Liu <jamieliu@google.com> References: http://thread.gmane.org/gmane.linux.kernel/1552567 [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
