- 06 Feb, 2019 19 commits
-
-
Daniel Borkmann authored
[ Upstream commit d5256083 ] While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit f5a0aab8 ("net: ipv4: dst for local input routes should use l3mdev if relevant") and 5f02ce24 ("net: l3mdev: Allow the l3mdev to be a loopback"). I found that reverting them back into using the net->loopback_dev fixed ipvlan l3s connectivity and got everything working for the CNI. Now judging from 4fbae7d8 ("ipvlan: Introduce l3s mode") and the l3mdev paper in [0] the only sole reason why ipvlan l3s is relying on l3 master device is to get the l3mdev_ip_rcv() receive hook for setting the dst entry of the input route without adding its own ipvlan specific hacks into the receive path, however, any l3 domain semantics beyond just that are breaking l3s operation. Note that ipvlan also has the ability to dynamically switch its internal operation from l3 to l3s for all ports via ipvlan_set_port_mode() at runtime. In any case, l3 vs l3s soley distinguishes itself by 'de-confusing' netfilter through switching skb->dev to ipvlan slave device late in NF_INET_LOCAL_IN before handing the skb to L4. Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which, if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook without any additional l3mdev semantics on top. This should also have minimal impact since dev->priv_flags is already hot in cache. With this set, l3s mode is working fine and I also get things like masquerading pod traffic on the ipvlan master properly working. [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf Fixes: f5a0aab8 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 5f02ce24 ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 4fbae7d8 ("ipvlan: Introduce l3s mode") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Mahesh Bandewar <maheshb@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Florian Westphal <fw@strlen.de> Cc: Martynas Pumputis <m@lambda.lt> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jacob Wen authored
[ Upstream commit 4522a70d ] Use pskb_may_pull() to make sure the optional fields are in skb linear parts, so we can safely read them later. It's easy to reproduce the issue with a net driver that supports paged skb data. Just create a L2TPv3 over IP tunnel and then generates some network traffic. Once reproduced, rx err in /sys/kernel/debug/l2tp/tunnels will increase. Changes in v4: 1. s/l2tp_v3_pull_opt/l2tp_v3_ensure_opt_in_linear/ 2. s/tunnel->version != L2TP_HDR_VER_2/tunnel->version == L2TP_HDR_VER_3/ 3. Add 'Fixes' in commit messages. Changes in v3: 1. To keep consistency, move the code out of l2tp_recv_common. 2. Use "net" instead of "net-next", since this is a bug fix. Changes in v2: 1. Only fix L2TPv3 to make code simple. To fix both L2TPv3 and L2TPv2, we'd better refactor l2tp_recv_common. It's complicated to do so. 2. Reloading pointers after pskb_may_pull Fixes: f7faffa3 ("l2tp: Add L2TPv3 protocol support") Fixes: 0d76751f ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Fixes: a32e0eec ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by:
Jacob Wen <jian.w.wen@oracle.com> Acked-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
commit 62e7b6a5 upstream. Remove l2specific_len dependency while building l2tpv3 header or parsing the received frame since default L2-Specific Sublayer is always four bytes long and we don't need to rely on a user supplied value. Moreover in l2tp netlink code there are no sanity checks to enforce the relation between l2specific_len and l2specific_type, so sending a malformed netlink message is possible to set l2specific_type to L2TP_L2SPECTYPE_DEFAULT (or even L2TP_L2SPECTYPE_NONE) and set l2specific_len to a value greater than 4 leaking memory on the wire and sending corrupted frames. Reviewed-by:
Guillaume Nault <g.nault@alphalink.fr> Tested-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 2e6dc4d9 ] This patch is to improve sctp stream reset events in 4 places: 1. In sctp_process_strreset_outreq(), the flag should always be set with SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in stream is reset here. 2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN check, as the reset has to succeed after reconf_timer stops for the in stream reset request retransmission. 3. In sctp_process_strreset_inreq(), no event should be sent, as no in or out stream is reset here. 4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or OUTGOING event should always be sent for stream reset requests, no matter it fails or succeeds to process the request. Fixes: 81054476 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter") Fixes: 16e1a919 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter") Fixes: 11ae76e6 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 8220c870 ] This patch is to improve sctp stream adding events in 2 places: 1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM and in stream allocation failure checks, as the adding has to succeed after reconf_timer stops for the in stream adding request retransmission. 3. In sctp_process_strreset_addstrm_in(), no event should be sent, as no in or out stream is added here. Fixes: 50a41591 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter") Fixes: c5c4ebb3 ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter") Reported-by:
-
Toshiaki Makita authored
[ Upstream commit 188313c1 ] When _virtnet_set_queues() failed we did not restore real_num_rx_queues. Fix this by placing the change of real_num_rx_queues after _virtnet_set_queues(). This order is also in line with virtnet_set_channels(). Fixes: 4941d472 ("virtio-net: do not reset during XDP set") Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 534da5e8 ] When napi_tx is enabled, virtnet_poll_cleantx() called free_old_xmit_skbs() even for xdp send queue. This is bogus since the queue has xdp_frames, not sk_buffs, thus mangled device tx bytes counters because skb->len is meaningless value, and even triggered oops due to general protection fault on freeing them. Since xdp send queues do not aquire locks, old xdp_frames should be freed only in virtnet_xdp_xmit(), so just skip free_old_xmit_skbs() for xdp send queues. Similarly virtnet_poll_tx() called free_old_xmit_skbs(). This NAPI handler is called even without calling start_xmit() because cb for tx is by default enabled. Once the handler is called, it enabled the cb again, and then the handler would be called again. We don't need this handler for XDP, so don't enable cb as well as not calling free_old_xmit_skbs(). Also, we need to disable tx NAPI when disabling XDP, so virtnet_poll_tx() can safely access curr_queue_pairs and xdp_queue_pairs, which are not atomically updated while disabling XDP. Fixes: b92f1e67 ("virtio-net: transmit napi") Fixes: 7b0411ef ("virtio-net: clean tx descriptors from rx napi") Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 8be4d9a4 ] Commit 4e09ff53 ("virtio-net: disable NAPI only when enabled during XDP set") tried to fix inappropriate NAPI enabling/disabling when !netif_running(), but was not complete. On error path virtio_net could enable NAPI even when !netif_running(). This can cause enabling NAPI twice on virtnet_open(), which would trigger BUG_ON() in napi_enable(). Fixes: 4941d472 ("virtio-net: do not reset during XDP set") Signed-off-by:
-
Bodong Wang authored
[ Upstream commit 4e046de0 ] This reverts commit 5f5991f3. With the original commit, eswitch instance will not be initialized for a function which is vport group manager but not eswitch manager such as host PF on SmartNIC (BlueField) card. This will result in a kernel crash when such a vport group manager is trying to access vports in its group. E.g, PF vport manager (not eswitch manager) tries to configure the MAC of its VF vport, a kernel trace will happen similar as bellow: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:mlx5_eswitch_get_vport_config+0xc/0x180 [mlx5_core] ... Fixes: 5f5991f3 ("net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager") Signed-off-by:
Bodong Wang <bodong@mellanox.com> Reported-by:
Yuval Avnery <yuvalav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Aya Levin authored
[ Upstream commit 9d2cbdc5 ] Prior to this patch the driver prohibited spoof checking on invalid MAC. Now the user can set this configuration if it wishes to. This is required since libvirt might invalidate the VF Mac by setting it to zero, while spoofcheck is ON. Fixes: 1ab2068a ("net/mlx5: Implement vports admin state backup/restore") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Mathias Thore authored
[ Upstream commit e15aa3b2 ] After a timeout event caused by for example a broadcast storm, when the MAC and PHY are reset, the BQL TX queue needs to be reset as well. Otherwise, the device will exhibit severe performance issues even after the storm has ended. Co-authored-by:
David Gounaris <david.gounaris@infinera.com> Signed-off-by:
Mathias Thore <mathias.thore@infinera.com> Signed-off-by:
-
Josh Elsasser authored
[ Upstream commit 35edfdc7 ] Assign a default net namespace to netdevs created by init_dummy_netdev(). Fixes a NULL pointer dereference caused by busy-polling a socket bound to an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat if napi_poll() received packets: BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 IP: napi_busy_loop+0xd6/0x200 Call Trace: sock_poll+0x5e/0x80 do_sys_poll+0x324/0x5a0 SyS_poll+0x6c/0xf0 do_syscall_64+0x6b/0x1f0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 7db6b048 ("net: Commonize busy polling code to focus on napi_id instead of socket") Signed-off-by:
Josh Elsasser <jelsasser@appneta.com> Signed-off-by:
-
Bernard Pidoux authored
[ Upstream commit b0cf0292 ] When an internally generated frame is handled by rose_xmit(), rose_route_frame() is called: if (!rose_route_frame(skb, NULL)) { dev_kfree_skb(skb); stats->tx_errors++; return NETDEV_TX_OK; } We have the same code sequence in Net/Rom where an internally generated frame is handled by nr_xmit() calling nr_route_frame(skb, NULL). However, in this function NULL argument is tested while it is not in rose_route_frame(). Then kernel panic occurs later on when calling ax25cmp() with a NULL ax25_cb argument as reported many times and recently with syzbot. We need to test if ax25 is NULL before using it. Testing: Built kernel with CONFIG_ROSE=y. Signed-off-by:
Bernard Pidoux <f6bvp@free.fr> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+1a2c456a1ea08fa5b5f7@syzkaller.appspotmail.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bernard Pidoux <f6bvp@free.fr> Cc: linux-hams@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Cong Wang authored
[ Upstream commit 63346650 ] sk_reset_timer() and sk_stop_timer() properly handle sock refcnt for timer function. Switching to them could fix a refcounting bug reported by syzbot. Reported-and-tested-by: syzbot+defa700d16f1bd1b9a05@syzkaller.appspotmail.com Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-hams@vger.kernel.org Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Aya Levin authored
[ Upstream commit a40ded60 ] Driver reads the query HCA capabilities without the corresponding masks. Without the correct masks, the base addresses of the queues are unaligned. In addition some reserved bits were wrongly read. Using the correct masks, ensures alignment of the base addresses and allows future firmware versions safe use of the reserved bits. Fixes: ab9c17a0 ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet") Fixes: 0ff1fb65 ("{NET, IB}/mlx4: Add device managed flow steering firmware API") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Jacob Wen authored
[ Upstream commit 91c52470 ] The size of L2TPv2 header with all optional fields is 14 bytes. l2tp_udp_recv_core only moves 10 bytes to the linear part of a skb. This may lead to l2tp_recv_common read data outside of a skb. This patch make sure that there is at least 14 bytes in the linear part of a skb to meet the maximum need of l2tp_udp_recv_core and l2tp_recv_common. The minimum size of both PPP HDLC-like frame and Ethernet frame is larger than 14 bytes, so we are safe to do so. Also remove L2TP_HDR_SIZE_NOSEQ, it is unused now. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Suggested-by:
-
Yohei Kanemaru authored
[ Upstream commit ef489749 ] skb->cb may contain data from previous layers (in an observed case IPv4 with L3 Master Device). In the observed scenario, the data in IPCB(skb)->frags was misinterpreted as IP6CB(skb)->frag_max_size, eventually caused an unexpected IPv6 fragmentation in ip6_fragment() through ip6_finish_output(). This patch clears IP6CB(skb), which potentially contains garbage data, on the SRH ip4ip6 encapsulation. Fixes: 32d99d0b ("ipv6: sr: add support for ip4ip6 encapsulation") Signed-off-by:
Yohei Kanemaru <yohei.kanemaru@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit c5ee0663 ] IPv6 does not consider if the socket is bound to a device when binding to an address. The result is that a socket can be bound to eth0 and then bound to the address of eth1. If the device is a VRF, the result is that a socket can only be bound to an address in the default VRF. Resolve by considering the device if sk_bound_dev_if is set. This problem exists from the beginning of git history. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
ade44640 ("net: ipv4: do not handle duplicate fragments as overlapping") was backported to many stable trees, but it had a problem that was "accidentally" fixed by the upstream commit 0ff89efb ("ip: fail fast on IP defrag errors") This is the fixup for that problem as we do not want the larger patch in the older stable trees. Fixes: ade44640 ("net: ipv4: do not handle duplicate fragments as overlapping") Reported-by:
Ivan Babrou <ivan@cloudflare.com> Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 31 Jan, 2019 21 commits
-
-
Greg Kroah-Hartman authored
-
Anand Jain authored
commit 0d228ece upstream. At the time of forced unmount we place the running replace to BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state, so when the system comes back and expect the target device is missing. Then let the replace state continue to be in BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state instead of BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED as there isn't any matching scrub running as part of replace. Fixes: e93c89c1 ("Btrfs: add new sources for device replace code") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Jeff Mahoney authored
commit 5c061471 upstream. When we fail to start a transaction in btrfs_dev_replace_start, we leave dev_replace->replace_start set to STARTED but clear ->srcdev and ->tgtdev. Later, that can result in an Oops in btrfs_dev_replace_progress when having state set to STARTED or SUSPENDED implies that ->srcdev is valid. Also fix error handling when the state is already STARTED or SUSPENDED while starting. That, too, will clear ->srcdev and ->tgtdev even though it doesn't own them. This should be an impossible case to hit since we should be protected by the BTRFS_FS_EXCL_OP bit being set. Let's add an ASSERT there while we're at it. Fixes: e93c89c1 (Btrfs: add new sources for device replace code) CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
-
Pan Bian authored
commit 0ea295dd upstream. The function truncate_node frees the page with f2fs_put_page. However, the page index is read after that. So, the patch reads the index before freeing the page. Fixes: bf39c00a ("f2fs: drop obsolete node page when it is truncated") Cc: <stable@vger.kernel.org> Signed-off-by:
Pan Bian <bianpan2016@163.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Juergen Gross authored
commit 867cefb4 upstream. Commit f94c8d11 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") broke Xen guest time handling across migration: [ 187.249951] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 187.251137] OOM killer disabled. [ 187.251137] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 187.252299] suspending xenstore... [ 187.266987] xen:grant_table: Grant tables using version 1 layout [18446743811.706476] OOM killer enabled. [18446743811.706478] Restarting tasks ... done. [18446743811.720505] Setting capacity to 16777216 Fix that by setting xen_sched_clock_offset at resume time to ensure a monotonic clock value. [boris: replaced pr_info() with pr_info_once() in xen_callback_vector() to avoid printing with incorrect timestamp during resume (as we haven't re-adjusted the clock yet)] Fixes: f94c8d11 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") Cc: <stable@vger.kernel.org> # 4.11 Reported-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Tested-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Pavel Tatashin authored
commit 38669ba2 upstream. It is expected for sched_clock() to output data from 0, when system boots. Add an offset xen_sched_clock_offset (similarly how it is done in other hypervisors i.e. kvm_sched_clock_offset) to count sched_clock() from 0, when time is first initialized. Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-14-pasha.tatashin@oracle.comSigned-off-by:
-
Joao Martins authored
commit 2229f70b upstream. In order to support pvclock vdso on xen we need to setup the time info page for vcpu 0 and register the page with Xen using the VCPUOP_register_vcpu_time_memory_area hypercall. This hypercall will also forcefully update the pvti which will set some of the necessary flags for vdso. Afterwards we check if it supports the PVCLOCK_TSC_STABLE_BIT flag which is mandatory for having vdso/vsyscall support. And if so, it will set the cpu 0 pvti that will be later on used when mapping the vdso image. The xen headers are also updated to include the new hypercall for registering the secondary vcpu_time_info struct. Signed-off-by:
Joao Martins <joao.m.martins@oracle.com> Reviewed-by:
-
Joao Martins authored
commit b8888080 upstream. Specifically check for PVCLOCK_TSC_STABLE_BIT and if this bit is set, then set it too on pvclock flags. This allows Xen clocksource to use it and thus speeding up xen_clocksource_read() callers (i.e. sched_clock()) Signed-off-by:
-
Joao Martins authored
commit 9f08890a upstream. Right now there is only a pvclock_pvti_cpu0_va() which is defined on kvmclock since: commit dac16fba ("x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap") The only user of this interface so far is kvm. This commit adds a setter function for the pvti page and moves pvclock_pvti_cpu0_va to pvclock, which is a more generic place to have it; and would allow other PV clocksources to use it, such as Xen. While moving pvclock_pvti_cpu0_va into pvclock, rename also this function to pvclock_get_pvti_cpu0_va (including its call sites) to be symmetric with the setter (pvclock_set_pvti_cpu0_va). Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
-
Joao Martins authored
commit 001f60e1 upstream. In the event of moving pvclock_pvti_cpu0_va() definition to common pvclock code, this function would return a value on non KVM guests. Later on this would fail with a GPF on ptp_kvm_init when running on a Xen guest. Therefore, ptp_kvm_init() should check whether it is running in a KVM guest. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Mathias Nyman authored
commit f0680904 upstream. Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by:
Jack Pham <jackp@codeaurora.org> Tested-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Jack Pham authored
commit bd674224 upstream. OUT endpoint requests may somtimes have this flag set when preparing to be submitted to HW indicating that there is an additional TRB chained to the request for alignment purposes. If that request is removed before the controller can execute the transfer (e.g. ep_dequeue/ep_disable), the request will not go through the dwc3_gadget_ep_cleanup_completed_request() handler and will not have its needs_extra_trb flag cleared when dwc3_gadget_giveback() is called. This same request could be later requeued for a new transfer that does not require an extra TRB and if it is successfully completed, the cleanup and TRB reclamation will incorrectly process the additional TRB which belongs to the next request, and incorrectly advances the TRB dequeue pointer, thereby messing up calculation of the next requeust's actual/remaining count when it completes. The right thing to do here is to ensure that the flag is cleared before it is given back to the function driver. A good place to do that is in dwc3_gadget_del_and_unmap_request(). Fixes: c6267a51 ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: stable@vger.kernel.org Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> [jackp: backport to <= 4.20: replaced 'needs_extra_trb' with 'unaligned' and 'zero' members in patch and reworded commit text] Signed-off-by:
-
Raju Rangoju authored
commit 5cbab630 upstream. Under heavy load if we don't have any pre-allocated rsps left, we dynamically allocate a rsp, but we are not actually allocating memory for nvme_completion (rsp->req.rsp). In such a case, accessing pointer fields (req->rsp->status) in nvmet_req_init() will result in crash. To fix this, allocate the memory for nvme_completion by calling nvmet_rdma_alloc_rsp() Fixes: 8407879c("nvmet-rdma:fix possible bogus dereference under heavy load") Cc: <stable@vger.kernel.org> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Israel Rukshin authored
commit ad1f8249 upstream. Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
-
David Hildenbrand authored
commit 60f1bf29 upstream. When calling smp_call_ipl_cpu() from the IPL CPU, we will try to read from pcpu_devices->lowcore. However, due to prefixing, that will result in reading from absolute address 0 on that CPU. We have to go via the actual lowcore instead. This means that right now, we will read lc->nodat_stack == 0 and therfore work on a very wrong stack. This BUG essentially broke rebooting under QEMU TCG (which will report a low address protection exception). And checking under KVM, it is also broken under KVM. With 1 VCPU it can be easily triggered. :/# echo 1 > /proc/sys/kernel/sysrq :/# echo b > /proc/sysrq-trigger [ 28.476745] sysrq: SysRq : Resetting [ 28.476793] Kernel stack overflow. [ 28.476817] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476820] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476826] Krnl PSW : 0400c00180000000 0000000000115c0c (pcpu_delegate+0x12c/0x140) [ 28.476861] R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 28.476863] Krnl GPRS: ffffffffffffffff 0000000000000000 000000000010dff8 0000000000000000 [ 28.476864] 0000000000000000 0000000000000000 0000000000ab7090 000003e0006efbf0 [ 28.476864] 000000000010dff8 0000000000000000 0000000000000000 0000000000000000 [ 28.476865] 000000007fffc000 0000000000730408 000003e0006efc58 0000000000000000 [ 28.476887] Krnl Code: 0000000000115bfe: 4170f000 la %r7,0(%r15) [ 28.476887] 0000000000115c02: 41f0a000 la %r15,0(%r10) [ 28.476887] #0000000000115c06: e370f0980024 stg %r7,152(%r15) [ 28.476887] >0000000000115c0c: c0e5fffff86e brasl %r14,114ce8 [ 28.476887] 0000000000115c12: 41f07000 la %r15,0(%r7) [ 28.476887] 0000000000115c16: a7f4ffa8 brc 15,115b66 [ 28.476887] 0000000000115c1a: 0707 bcr 0,%r7 [ 28.476887] 0000000000115c1c: 0707 bcr 0,%r7 [ 28.476901] Call Trace: [ 28.476902] Last Breaking-Event-Address: [ 28.476920] [<0000000000a01c4a>] arch_call_rest_init+0x22/0x80 [ 28.476927] Kernel panic - not syncing: Corrupt kernel stack, can't continue. [ 28.476930] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476932] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476932] Call Trace: Fixes: 2f859d0d ("s390/smp: reduce size of struct pcpu") Cc: stable@vger.kernel.org # 4.0+ Reported-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Sean Christopherson authored
Upstream commit: f775b13e ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") introduced a bug, which was later fixed by upstream commit: 5663d8f9 ("kvm: x86: fix WARN due to uninitialized guest FPU state") For reasons unknown, both commits were initially passed-over for inclusion in the 4.14 stable branch despite being tagged for stable. Eventually, someone noticed that the fixup, commit 5663d8f9, was missing from stable[1], and so it was queued up for 4.14 and included in release v4.14.79. Even later, the original buggy patch, commit f775b13e, was also applied to the 4.14 stable branch. Through an unlucky coincidence, the incorrect ordering did not generate a conflict between the two patches, and led to v4.14.94 and later releases containing a spurious call to kvm_load_guest_fpu() in kvm_arch_vcpu_ioctl_run(). As a result, KVM may reload stale guest FPU state, e.g. after accepting in INIT event. This can manifest as crashes during boot, segfaults, failed checksums and so on and so forth. Remove the unwanted kvm_{load,put}_guest_fpu() calls, i.e. make kvm_arch_vcpu_ioctl_run() look like commit 5663d8f9 was backported after commit f775b13e. [1] https://www.spinics.net/lists/stable/msg263931.html Fixes: 4124a4cf ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") Cc: stable@vger.kernel.org Cc: Sasha Levin <sashal@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Reported-by: Roman Mamedov Reported-by:Thomas Lindroth <thomas.lindroth@gmail.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Acked-by:
-
Jose Abreu authored
commit 52a76235 upstream. Currently we are using all the available fifo size in RQS and TQS fields. This will not work correctly in multi-queues IP's because total fifo size must be splitted to the enabled queues. Correct this by computing the available fifo size per queue and setting the right value in TQS and RQS fields. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Sasha Levin authored
This reverts commit e65cd9a2. Tommi T. Rrantala notes: PTRACE_SECCOMP_GET_METADATA was only added in 4.16 (26500475) And it's also breaking seccomp_bpf.c compilation for me: seccomp_bpf.c: In function ‘get_metadata’: seccomp_bpf.c:2878:26: error: storage size of ‘md’ isn’t known struct seccomp_metadata md; Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Milian Wolff authored
[ Upstream commit 1fe627da ] libdwfl parses an ELF file itself and creates mappings for the individual sections. perf on the other hand sees raw mmap events which represent individual sections. When we encounter an address pointing into a mapping with pgoff != 0, we must take that into account and report the file at the non-offset base address. This fixes unwinding with libdwfl in some cases. E.g. for a file like: ``` using namespace std; mutex g_mutex; double worker() { lock_guard<mutex> guard(g_mutex); uniform_real_distribution<double> uniform(-1E5, 1E5); default_random_engine engine; double s = 0; for (int i = 0; i < 1000; ++i) { s += norm(complex<double>(uniform(engine), uniform(engine))); } cout << s << endl; return s; } int main() { vector<std::future<double>> results; for (int i = 0; i < 10000; ++i) { results.push_back(async(launch::async, worker)); } return 0; } ``` Compile it with `g++ -g -O2 -lpthread cpp-locking.cpp -o cpp-locking`, then record it with `perf record --call-graph dwarf -e sched:sched_switch`. When you analyze it with `perf script` and libunwind, you should see: ``` cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120 ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux) 7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so) 7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so) 7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so) 7f38e42569e5 __GI___libc_malloc+0x115 (inlined) 7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined) 7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined) 7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined) 7f38e424df36 _IO_new_file_xsputn+0x116 (inlined) 7f38e4242bfb __GI__IO_fwrite+0xdb (inlined) 7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c> 7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl> 7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25) 563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined) 563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking) 563b9cb506fb double std::__invoke_impl<double, double (*)()>(std::__invoke_other, double (*&&)())+0x2b (inlined) 563b9cb506fb std::__invoke_result<double (*)()>::type std::__invoke<double (*)()>(double (*&&)())+0x2b (inlined) 563b9cb506fb decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<double (*)()> >::_M_invoke<0ul>(std::_Index_tuple<0ul>)+0x2b (inlined) 563b9cb506fb std::thread::_Invoker<std::tuple<double (*)()> >::operator()()+0x2b (inlined) 563b9cb506fb std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<double>, std::__future_base::_Result_base::_Deleter>, std::thread::_Invoker<std::tuple<double (*)()> >, dou> 563b9cb506fb std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_> 563b9cb507e8 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const+0x28 (inlined) 563b9cb507e8 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)+0x28 (/ssd/milian/> 7f38e46d24fe __pthread_once_slow+0xbe (/usr/lib/libpthread-2.28.so) 563b9cb51149 __gthread_once+0xe9 (inlined) 563b9cb51149 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)> 563b9cb51149 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool)+0xe9 (inlined) 563b9cb51149 std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >&&)::{lambda()#1}::op> 563b9cb51149 void std::__invoke_impl<void, std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double> 563b9cb51149 std::__invoke_result<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >> 563b9cb51149 decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_> 563b9cb51149 std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<dou> 563b9cb51149 std::thread::_State_impl<std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread> 7f38e45f0062 execute_native_thread_routine+0x12 (/usr/lib/libstdc++.so.6.0.25) 7f38e46caa9c start_thread+0xfc (/usr/lib/libpthread-2.28.so) 7f38e42ccb22 __GI___clone+0x42 (inlined) ``` Before this patch, using libdwfl, you would see: ``` cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120 ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux) 7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so) a041161e77950c5c [unknown] ([unknown]) ``` With this patch applied, we get a bit further in unwinding: ``` cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120 ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux) 7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so) 7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so) 7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so) 7f38e42569e5 __GI___libc_malloc+0x115 (inlined) 7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined) 7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined) 7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined) 7f38e424df36 _IO_new_file_xsputn+0x116 (inlined) 7f38e4242bfb __GI__IO_fwrite+0xdb (inlined) 7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c> 7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl> 7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25) 563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined) 563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking) 6eab825c1ee3e4ff [unknown] ([unknown]) ``` Note that the backtrace is still stopping too early, when compared to the nice results obtained via libunwind. It's unclear so far what the reason for that is. Committer note: Further comment by Milian on the thread started on the Link: tag below: --- The remaining issue is due to a bug in elfutils: https://sourceware.org/ml/elfutils-devel/2018-q4/msg00089.html With both patches applied, libunwind and elfutils produce the same output for the above scenario. --- Signed-off-by:
Milian Wolff <milian.wolff@kdab.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181029141644.3907-1-milian.wolff@kdab.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Martin Vuille authored
[ Upstream commit 3d20c624 ] Path passed to libdw for unwinding doesn't include symfs path if specified, so unwinding fails because ELF file is not found. Similar to unwinding with libunwind, pass symsrc_filename instead of long_name. If there is no symsrc_filename, fallback to long_name. Signed-off-by:
Martin Vuille <jpmv27@aim.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20180211212420.18388-1-jpmv27@aim.comSigned-off-by:
-
Nicolas Pitre authored
commit 0c9b1965 upstream. User space using poll() on /dev/vcs devices are not awaken when a screen size change occurs. Let's fix that. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
