- 19 May, 2014 3 commits
-
-
Daniel Vetter authored
Just for consistency, this patch won't fix anything really. v2: Rebase over all the recent plane enabling shuffling. Reviewed-by: Akash Goel <akash.goel@intel.com> (v1) Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Way back we've used this to reject framebuffers with unsupported pixel formats. But since the modesetting reorg with the compute config stage we reject those much earlier and just BUG() in this callback. So switch to a void return type. Reviewed-by:
Akash Goel <akash.goel@intel.com> Signed-off-by:
-
Chris Wilson authored
More fallout from commit c8725f3d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Mar 17 12:21:55 2014 +0000 drm/i915: Do not call retire_requests from wait_for_rendering is that we can completely fill all of memory using small objects, such that we exhaust the filp space, and spend all of our time evicting objects from the aperture. As such, we never fill the ring, and never trigger the last resort flushing in commit 1cf0ba14 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon May 5 09:07:33 2014 +0100 drm/i915: Flush request queue when waiting for ring space and so all the requests are left active and the objects keep that last active reference. Eventually the system comes to a halt as it runs out of memory. The impact is mainly limited to test cases as regular userspace will trigger retirement by manually checking whether an object is active. Testcase: igt/gem_lut_handle Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78724Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Guo Jinxian <jinxianx.guo@intel.com> Signed-off-by:
-
- 16 May, 2014 20 commits
-
-
Chris Wilson authored
Since commit 691e6415 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Apr 9 09:07:36 2014 +0100 drm/i915: Always use kref tracking for all contexts. we have contexts everywhere, and so we must be careful to distinguish fake contexts, which do not have an associated bo, and real ones, which do. In particular, we now need to be careful not to dereference NULL pointers. This is one such example, as the commit highlighted above failed to move the unpinning of the default ctx object into the real-context-only branch. Reported-by:
-
Ville Syrjälä authored
Some platforms have a shared error interrupt, so if FIFO underrun reporting gets disabled for one pipe/transcoder it gets disabled for all pipes/transcoders. When we disable FIFO underrun reporting we check whether the interrupt was enabled or not. If it wasn't we might have missed an underrun and we perform one last check right there. Currently we print a debug message when an underrun is detect using this mechanism. Promote the message to DRM_ERROR() to match the other underrun error messages. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
By exporting the ability to map user address and inserting PTEs representing their backing pages into the GTT, we can exploit UMA in order to utilize normal application data as a texture source or even as a render target (depending upon the capabilities of the chipset). This has a number of uses, with zero-copy downloads to the GPU and efficient readback making the intermixed streaming of CPU and GPU operations fairly efficient. This ability has many widespread implications from faster rendering of client-side software rasterisers (chromium), mitigation of stalls due to read back (firefox) and to faster pipelining of texture data (such as pixel buffer objects in GL or data blobs in CL). v2: Compile with CONFIG_MMU_NOTIFIER v3: We can sleep while performing invalidate-range, which we can utilise to drop our page references prior to the kernel manipulating the vma (for either discard or cloning) and so protect normal users. v4: Only run the invalidate notifier if the range intercepts the bo. v5: Prevent userspace from attempting to GTT mmap non-page aligned buffers v6: Recheck after reacquire mutex for lost mmu. v7: Fix implicit padding of ioctl struct by rounding to next 64bit boundary. v8: Fix rebasing error after forwarding porting the back port. v9: Limit the userptr to page aligned entries. We now expect userspace to handle all the offset-in-page adjustments itself. v10: Prevent vma from being copied across fork to avoid issues with cow. v11: Drop vma behaviour changes -- locking is nigh on impossible. Use a worker to load user pages to avoid lock inversions. v12: Use get_task_mm()/mmput() for correct refcounting of mm. v13: Use a worker to release the mmu_notifier to avoid lock inversion v14: Decouple mmu_notifier from struct_mutex using a custom mmu_notifer with its own locking and tree of objects for each mm/mmu_notifier. v15: Prevent overlapping userptr objects, and invalidate all objects within the mmu_notifier range v16: Fix a typo for iterating over multiple objects in the range and rearrange error path to destroy the mmu_notifier locklessly. Also close a race between invalidate_range and the get_pages_worker. v17: Close a race between get_pages_worker/invalidate_range and fresh allocations of the same userptr range - and notice that struct_mutex was presumed to be held when during creation it wasn't. v18: Sigh. Fix the refactor of st_set_pages() to allocate enough memory for the struct sg_table and to clear it before reporting an error. v19: Always error out on read-only userptr requests as we don't have the hardware infrastructure to support them at the moment. v20: Refuse to implement read-only support until we have the required infrastructure - but reserve the bit in flags for future use. v21: use_mm() is not required for get_user_pages(). It is only meant to be used to fix up the kernel thread's current->mm for use with copy_user(). v22: Use sg_alloc_table_from_pages for that chunky feeling v23: Export a function for sanity checking dma-buf rather than encode userptr details elsewhere, and clean up comments based on suggestions by Bradley. Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Brad Volkin <bradley.d.volkin@intel.com> [danvet: Frob ioctl allocation to pick the next one - will cause a bit of fuss with create2 apparently, but such are the rules.] [danvet2: oops, forgot to git add after manual patch application] [danvet3: Appease sparse.] Signed-off-by:
-
Mika Kuoppala authored
Bit 31 in GEN6_PMINTRMSK is not an interrupt disable bit with gen8. Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
Oscar Mateo authored
Otherwise, we do a NULL pointer dereference. I've seen this happen while handling an error in i915_gem_object_pin_to_display_plane(): If i915_gem_object_set_cache_level() fails, we call is_pin_display() to handle the error. At this point, the object is still not pinned to GGTT and maybe not even bound, so we have to check before we dereference its GGTT vma. The IGT kms_flip/bo-too-big tests for this bug. v2: Chris Wilson says restoring the old value is easier, but that is_pin_display is useful as a theory of operation. Take the solomonic decision: at least this way is_pin_display is a little more robust (until Chris can kill it off). v3: Chris suggests the WARN in i915_gem_obj_to_ggtt has outlived its usefulness: add a reminder to remove it. Issue: VIZ-3772 Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Testcase: igt/kms_flip/bo-too-big Reviewed-by:
-
Daniel Vetter authored
All the callbacks are gone now. Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Daniel Vetter authored
Looking at our current dsi driver I note that: - We don't have any slave driver right now. - There's zero support for the hardware state readout and cross check code. - All the modeset state seems to be tracked in the intel_dsi structure instead of the pipe config. Given all that I can't properly audit the dsi ->mode_set callback. So just do it as the first thing in the ->pre_pll_enable hook and hope for the best. Reviewed-by:
-
Daniel Vetter authored
A bit more care required here since there are some very few things between the call to encoder->mode_set and encoder->pre_enable. But they're either book-keeping or only matter for the vga port on the pch. So of no concern. Note that with the new sequence we write the infoframes after selecting the clock source, but that shouldn't matter. I've simply opted for this to have simpler code. Reviewed-by:
-
Daniel Vetter authored
All the hard work was already done, only thing left to do is remove the empty callback. And a now rather misleading comment I've spotted while reading through code. Reviewed-by:
-
Daniel Vetter authored
Similar to dp the only thing we do is call intel_write_eld and prepare a bit of state for the enable hooks. The only difference is that we write that to the hardware instead of keeping track of it somewhere in software. Still we can just move all this to the very first enable hook. Reviewed-by:
Naresh Kumar Kachhi <naresh.kumar.kachhi@intel.com> Signed-off-by:
-
Daniel Vetter authored
Those functions are only used on vlv platforms, so no need to check. Especially if we're not too consistent about it. Reviewed-by:
-
Daniel Vetter authored
With all the preceding refactoring the dp mode_set callback only computes a bit of state (all derived from the pipe config) and also writes the eld. As long as we do that before we enable the audio bit or depend upon the correct value in intel_dp->DP we'll be fine. No other hw state is touched. We therefore only need to check that clearing intel_dp->DP is save. Which it is since when we re-enable we already mask out all the bits the link training code sets. And we need to keep on doing that so that the re-train loop walking over pre-emph/voltage-swing values still works properly. Reviewed-by:
-
Daniel Vetter authored
Only ilk/snb/ivb need the port A pll setup, so move it to the pre_enable hook for those platforms. We can savely do this since on those platforms there's nothing that touches the hardware between the encoder->mode_set and the encoder->pre_enable calls. Also add a comment that port A is ilk+ only. Reviewed-by:
-
Daniel Vetter authored
Including state readout and cross-checking. This allows us to get rid of crtc->eld_vld on hsw+. It also means that fastboot will be unhappy if the BIOS hasn't set up the audio routing like we want it too. Wrt fastboot and external screens I see a few options: - Don't. - Try to fix up eld, infoframes and audio settings after the fact. But that means some pretty extensive reworking of our code which currently does all this while the pipe/port is still off. I won't bother with converting SDVO over to this because the audio support for SDVO is very lacking: - We don't update the eld. - We don't update the audio state on the sdvo encoder. - We don't check whether the platform can even feed audio to the sdvo encoder. I've converted hdmi, dp & ddi all in one go since ddi needs both hdmi and dp converted and so doing it step-by-step would have required a few intermediate hacks. Reviewed-by:
-
Daniel Vetter authored
There's no need to check whether audio is enabled (which for ddi ports is done through the crtc->eld_vld flag) since at the cost of a potentially unecessary register rmw cycle we can unconditionally do this. Note that the edp check is just paranoia since we won't ever call the write_eld function for an edp panel. Reviewed-by:
-
Daniel Vetter authored
This way we can rely on the state cross-checker to have a bit assurance that we'll get it right. Reviewed-by:
-
Daniel Vetter authored
At least on those platforms which have a simple bit and don't rely on the fully programmable CSC unit to do this. Note that with the current code this includes CHV, but I guess that platform will match BYT. Reviewed-by:
-
Daniel Vetter authored
We in the pre_enable hook we should only rely on the pipe config and not on some other state set through properties or detect functions. Reviewed-by:
-
Daniel Vetter authored
Also add state readout and cross-check support. The only invasive change is wiring up the new flag to the ->set_infoframes callbacks. Reviewed-by:
-
Daniel Vetter authored
For compliance we really should be sending NULL infoframes always when we detect a hdmi capable monitor. Also remove the now redudant setting for the has_audio case and enforce that audio is only possible with a hdmi sink. Reviewed-by:
-
- 15 May, 2014 8 commits
-
-
Mika Kuoppala authored
Everything should be in place so enable rc6/rps for bdw. Reviewed-by:
-
Mika Kuoppala authored
by correctly displaying result and requested. Suggested-by:
-
Deepak S authored
In BDW, Apart from unmasking up/down threshold interrupts. we need to umask bit 32 of PM_INTRMASK to route interrupts to target via Display Interface. v2: Add (1<<31) mask (Ville) v3: Add Gen check for the mask (ville) Reviewed-by:
Deepak S <deepak.s@linux.intel.com> Signed-off-by:
-
Ben Widawsky authored
Almost all of it is reusable from the existing code. The primary difference is we need to do even less in the interrupt handler, since interrupts are not shared in the same way. The patch is mostly a copy-paste of the existing snb+ code, with updates to the relevant parts requiring changes to the interrupt handling. As such it /should/ be relatively trivial. It's highly likely that I missed some places where I need a gen8 version of the PM interrupts, but it has become invisible to me by now. This patch could probably be split into adding the new functions, followed by actually handling the interrupts. Since the code is currently disabled (and broken) I think the patch stands better by itself. v2: Move the commit about not touching the ringbuffer interrupt to the snb_* function where it belongs (Rodrigo) v3: Rebased on Paulo's runtime PM changes v4: Not well validated, but rebase on commit 730488b2 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Mar 7 20:12:32 2014 -0300 drm/i915: kill dev_priv->pm.regsave v5: Rebased on latest code base. (Deepak) v6: Remove conflict markers, Unnecessary empty line and use right IIR interrupt (Ville) v7: mask modified without rmw (Ville Syrjälä) Reviewed-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Mika Kuoppala authored
If we dont have semaphores enabled, we allocate 4 dwords for signalling. But end up emitting more regardless. Fix this by bailing out early if semaphores are not enabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78274 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78283Signed-off-by:
-
Shobhit Kumar authored
Added as generic parameters which will be initialized in the panel driver and are specific to panels. Backlight delays have also kept as placeholders and will be used used once we have MIPI backlight enabling support Signed-off-by:
Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Shobhit Kumar authored
Signed-off-by:
-
Shobhit Kumar authored
In VBT fields operation mode is 0 for Video mode and 1 for command mode. This field will be directly used as is in generic panel driver. So adjust accordingly. Signed-off-by:
-
- 14 May, 2014 6 commits
-
-
Mika Kuoppala authored
These are generated with intel-gpu-tools/tools/null_state_gen v2: Don't use header file for states (Daniel Vetter) v3: Proper URB state size for gen8/GT3 (Damien Lespiau) Tested-by: Kristen Carlson Accardi <kristen@linux.intel.com> (v1) Tested-by: Oscar Mateo <oscar.mateo@intel.com> (v2) Acked-by:
-
Mika Kuoppala authored
HW guys say that it is not a cool idea to let device go into rc6 without proper 3d pipeline state. For each new uninitialized context, generate a valid null render state to be run on context creation. This patch introduces a skeleton with empty states. v2: - No need to vmap (Chris Wilson) - use .c files for state (Daniel Vetter) - no need to flush as i915_add_request does it - remove parameter for batch alloc size - don't wait for the init (Ben Widawsky) v3: - move to cpu/gpu (Chris Wilson) Tested-by: Kristen Carlson Accardi <kristen@linux.intel.com> (v1) Tested-by: -
Daniel Vetter authored
Otherwise we end up tearing down fences when e.g. the client quits way too early. Might or might not fix a fence pin_count BUG Ville has reported. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
Userspace can currently provoke this when e.g. trying to use a pinned scanout as a cursor or overlay target. Later on that might lead to some fun fence pin count mayhem. Spurred by Ville's report that something goes wrong here and originally I've thought that this might slip through the pwrite gtt fastpath. But that one checks of obj tiling, so should be ok. But one thing that _does_ blow up is the vma unbinding with more than one address space. The next patch will fix this. v2: Use a WARN_ON - Chris pointed out that we already catch all cases so userspace can't provoke this like I've originally feared. While reviewing relevant code I've noticed a pile of DRM_ERROR in the overlay&cursor code which are all triggerable by userspace. Tune them down while at it. v3: Split out the DRM_ERROR->DRM_DEBUG_KMS change into a separate patch, as requested by Chris. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
-
Daniel Vetter authored
Noticed while playing with coccinelle. Reviewed-by:
-
Chris Wilson authored
During initial probing of the modes to assign to the fbdev console, we use the CRTC and connector ids. These are much harder for us to understand than if we used their actual names (or pipe in the CRTC case). Similarly, we want to manually print the mode size rather than rely on mode->name being set. Signed-off-by:
-
- 13 May, 2014 3 commits
-
-
Damien Lespiau authored
Patch done using the following semantic patch (thanks Daniel for the help!) @@ iterator name list_for_each_entry; iterator name for_each_crtc; struct drm_crtc * crtc; struct drm_device * dev; @@ -list_for_each_entry(crtc,&dev->mode_config.crtc_list, head) { +for_each_crtc(dev,crtc) { ... } Followed by a couple of fixups by hand (that spatch doesn't match the cases where list_for_each_entry() is not followed by a set of '{', '}', but I couldn't figure out a way to leave the '{' out of the iterator match). Signed-off-by: -
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Generated using the semantic patch: @@ iterator name list_for_each_entry; iterator name for_each_intel_crtc; struct intel_crtc * crtc; struct drm_device * dev; @@ -list_for_each_entry(crtc,&dev->mode_config.crtc_list,...) { +for_each_intel_crtc(dev,crtc) { ... } Followed by a couple of fixups by hand (that spatch doesn't match the cases where list_for_each_entry() is not followed by a set of '{', '}', but I couldn't figure out a way to leave the '{' out of the iterator match). Signed-off-by:
-
