- 08 Oct, 2017 9 commits
-
-
Hans de Goede authored
[ Upstream commit 5757aca1 ] The vbus-present bit in the power status register also gets set to 1 when a usb-host cable (id-pin shorted to ground) is plugged in and a 5v boost converter is supplying 5v to the otg usb bus. This causes a "disconnect or unknown or ID event" warning in dmesg as well as the extcon device to report the last detected charger cable type as being connected even though none is connected. This commit switches to checking the vbus-valid bit instead, which is only 1 when both vbus is present and the vbus-path is enabled in the vbus-path control register (the vbus-path gets disabled when a usb-host cable is detected, to avoid the pmic drawing power from the 5v boost converter). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guilherme G Piccoli authored
[ Upstream commit 69b97cf6 ] Whenever the igb driver detects the result of a read operation returns a value composed only by F's (like 0xFFFFFFFF), it will detach the net_device, clear the hw_addr pointer and warn to the user that adapter's link is lost - those steps happen on igb_rd32(). In case a PCI error happens on Power architecture, there's a recovery mechanism called EEH, that will reset the PCI slot and call driver's handlers to reset the adapter and network functionality as well. We observed that once hw_addr is NULL after the error is detected on igb_rd32(), it's never assigned back, so in the process of resetting the network functionality we got a NULL pointer dereference in both igb_configure_tx_ring() and igb_configure_rx_ring(). In order to avoid such bug, this patch re-assigns the hw_addr value in the slot_reset handler. Reported-by:
Anthony H Thai <ahthai@us.ibm.com> Reported-by:
Harsha Thyagaraja <hathyaga@in.ibm.com> Signed-off-by:
Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 08d90c81 ] ralink_soc sould be assigned to RT3883_SOC, replace incorrect comparision with assignment. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Fixes: 418d29c8 ("MIPS: ralink: Unify SoC id handling") Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14903/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
[ Upstream commit 3f00f4d8 ] When clearing the .bss section in kernel_entry we do so using LONG_S instructions, and branch whilst the current write address doesn't equal the end of the .bss section minus the size of a long integer. The .bss section always begins at a long-aligned address and we always increment the write pointer by the size of a long integer - we therefore rely upon the .bss section ending at a long-aligned address. If this is not the case then the long-aligned write address can never be equal to the non-long-aligned end address & we will continue to increment past the end of the .bss section, attempting to zero the rest of memory. Despite this requirement that .bss end at a long-aligned address we pass 0 as the end alignment requirement to the BSS_SECTION macro and thus don't guarantee any particular alignment, allowing us to hit the error condition described above. Fix this by instead passing 8 bytes as the end alignment argument to the BSS_SECTION macro, ensuring that the end of the .bss section is always at least long-aligned. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14526/Signed-off-by:
-
Simon Horman authored
[ Upstream commit 654450ba ] Use recently added R-Car Gen 2 fallback binding for msiof nodes in DT for r8a7790 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7790 and the fallback binding for R-Car Gen 2. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Santosh Shilimkar authored
[ Upstream commit 941f8d55 ] When application sends an RDS RDMA composite message consist of RDMA transfer to be followed up by non RDMA payload, it expect to be notified *only* when the full message gets delivered. RDS RDMA notification doesn't behave this way though. Thanks to Venkat for debug and root casuing the issue where only first part of the message(RDMA) was successfully delivered but remainder payload delivery failed. In that case, application should not be notified with a false positive of message delivery success. Fix this case by making sure the user gets notified only after the full message delivery. Reviewed-by:
Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 14d37564 ] This patch fixes a place where function gfs2_glock_iter_next can reference an invalid error pointer. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Bartosz Golaszewski authored
[ Upstream commit 2e644be3 ] THS8135 is a configurable video DAC. Add DT bindings for this chip. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481623759-12786-3-git-send-email-bgolaszewski@baylibre.comSigned-off-by:
-
Kristian H. Kristensen authored
[ Upstream commit af913418 ] We need to define DRM_FORMAT_MOD_VENDOR_NONE for the fourcc_mod_code() macro to work correctly. Signed-off-by:
Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481657272-25975-1-git-send-email-hoegsberg@google.comSigned-off-by:
-
- 05 Oct, 2017 31 commits
-
-
Greg Kroah-Hartman authored
-
Arnd Bergmann authored
xen_swiotlb_dma_mmap was backported from v4.10, but older kernels before commit 00085f1e ("dma-mapping: use unsigned long for dma_attrs") use a different signature: arm/xen/mm.c:202:10: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] .mmap = xen_swiotlb_dma_mmap, ^~~~~~~~~~~~~~~~~~~~ arm/xen/mm.c:202:10: note: (near initialization for 'xen_swiotlb_dma_ops.mmap') This adapts the patch to the old calling conventions. Fixes: "swiotlb-xen: implement xen_swiotlb_dma_mmap callback" Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Stefano Stabellini <sstabellini@kernel.org> Signed-off-by:
-
Stefano Stabellini authored
commit 7e91c7df upstream. This function creates userspace mapping for the DMA-coherent memory. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Oleksandr Dmytryshyn <oleksandr.dmytryshyn@globallogic.com> Signed-off-by:
Andrii Anisov <andrii_anisov@epam.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by:
-
Vladis Dronov authored
commit 8e75f7a7 upstream. 'clk' is copied to a userland with padding byte(s) after 'vclk_post_div' field unitialized, leaking data from the stack. Fix this ensuring all of 'clk' is initialized to zero. References: https://github.com/torvalds/linux/pull/441Reported-by:
sohu0106 <sohu0106@126.com> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Paolo Bonzini authored
commit c0a1666b upstream. This fixes a compilation failure on 32-bit systems. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Robert Jarzmik authored
commit 4c35430a upstream. The number of requestor lines was clamped to 0 for all pxa architectures in the requestor declaration. Fix this by using the value. Fixes: 72b195cb ("ARM: pxa: add the number of DMA requestor lines") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Robert Jarzmik authored
commit 72b195cb upstream. Declare the number of DMA requestor lines per platform : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines This information will be used to activate the DMA flow control or not. Signed-off-by:
-
Robert Jarzmik authored
commit c283e41e upstream. The DMA chip has a fixed number of requestor lines used for flow control. This number is platform dependent. The pxa_dma dma driver will use this value to activate or not the flow control. There won't be any impact on mmp_pdma driver. Signed-off-by:
-
Frederic Barrat authored
commit 197267d0 upstream. cxl keeps a driver use count, which is used with the hash memory model on p8 to know when to upgrade local TLBIs to global and to trigger callbacks to manage the MMU for PSL8. If a process opens a context and closes without attaching or fails the attachment, the driver use count is never decremented. As a consequence, TLB invalidations remain global, even if there are no active cxl contexts. We should increment the driver use count when the process is attaching to the cxl adapter, and not on open. It's not needed before the adapter starts using the context and the use count is decremented on the detach path, so it makes more sense. It affects only the user api. The kernel api is already doing The Right Thing. Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Fixes: 7bb5d91a ("cxl: Rework context lifetimes") Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [ajd: backport to stable v4.4 tree] Signed-off-by:
-
Haozhong Zhang authored
commit 5753743f upstream. WARN_ON_ONCE(pi_test_sn(&vmx->pi_desc)) in kvm_vcpu_trigger_posted_interrupt() intends to detect the violation of invariant that VT-d PI notification event is not suppressed when vcpu is in the guest mode. Because the two checks for the target vcpu mode and the target suppress field cannot be performed atomically, the target vcpu mode may change in between. If that does happen, WARN_ON_ONCE() here may raise false alarms. As the previous patch fixed the real invariant breaker, remove this WARN_ON_ONCE() to avoid false alarms, and document the allowed cases instead. Signed-off-by:
Haozhong Zhang <haozhong.zhang@intel.com> Reported-by:
"Ramamurthy, Venkatesh" <venkatesh.ramamurthy@intel.com> Reported-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Haozhong Zhang authored
commit dc91f2eb upstream. In kvm_vcpu_trigger_posted_interrupt() and pi_pre_block(), KVM assumes that PI notification events should not be suppressed when the target vCPU is not blocked. vmx_update_pi_irte() sets the SN field before changing an interrupt from posting to remapping, but it does not check the vCPU mode. Therefore, the change of SN field may break above the assumption. Besides, I don't see reasons to suppress notification events here, so remove the changes of SN field to avoid race condition. Signed-off-by:
-
Myungho Jung authored
commit b94bf594 upstream. timer_migration sysctl acts as a boolean switch, so the allowed values should be restricted to 0 and 1. Add the necessary extra fields to the sysctl table entry to enforce that. [ tglx: Rewrote changelog ] Signed-off-by:
Myungho Jung <mhjungk@gmail.com> Link: http://lkml.kernel.org/r/1492640690-3550-1-git-send-email-mhjungk@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Kazuhiro Hayashi <kazuhiro3.hayashi@toshiba.co.jp> Signed-off-by:
-
Andreas Gruenbacher authored
commit 10201655 upstream. The switch to rhashtables (commit 88ffbf3e) broke the debugfs glock dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a single buffer: the right function for restarting an rhashtable iteration from the beginning of the hash table is rhashtable_walk_enter; rhashtable_walk_stop + rhashtable_walk_start will just resume from the current position. The upstream commit doesn't directly apply to 4.4.y because 4.4.y doesn't have rhashtable_walk_enter and the following mainline commits: 92ecd73a gfs2: Deduplicate gfs2_{glocks,glstats}_open cc37a627 gfs2: Replace rhashtable_walk_init with rhashtable_walk_enter Other than rhashtable_walk_enter, rhashtable_walk_init can fail. To handle the failure case in gfs2_glock_seq_stop, we check if rhashtable_walk_init has initialized iter->walker; if it has not, we must not call rhashtable_walk_stop or rhashtable_walk_exit. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 814fb7bb upstream. [Please apply to 4.4-stable. Note: the backport includes the fpstate_init() call in xstateregs_set(), since fix is useless without it. It was added by commit 91c3dba7 ("x86/fpu/xstate: Fix PTRACE frames for XSAVES"), but it doesn't make sense to backport that whole commit.] On x86, userspace can use the ptrace() or rt_sigreturn() system calls to set a task's extended state (xstate) or "FPU" registers. ptrace() can set them for another task using the PTRACE_SETREGSET request with NT_X86_XSTATE, while rt_sigreturn() can set them for the current task. In either case, registers can be set to any value, but the kernel assumes that the XSAVE area itself remains valid in the sense that the CPU can restore it. However, in the case where the kernel is using the uncompacted xstate format (which it does whenever the XSAVES instruction is unavailable), it was possible for userspace to set the xcomp_bv field in the xstate_header to an arbitrary value. However, all bits in that field are reserved in the uncompacted case, so when switching to a task with nonzero xcomp_bv, the XRSTOR instruction failed with a #GP fault. This caused the WARN_ON_FPU(err) in copy_kernel_to_xregs() to be hit. In addition, since the error is otherwise ignored, the FPU registers from the task previously executing on the CPU were leaked. Fix the bug by checking that the user-supplied value of xcomp_bv is 0 in the uncompacted case, and returning an error otherwise. The reason for validating xcomp_bv rather than simply overwriting it with 0 is that we want userspace to see an error if it (incorrectly) provides an XSAVE area in compacted format rather than in uncompacted format. Note that as before, in case of error we clear the task's FPU state. This is perhaps non-ideal, especially for PTRACE_SETREGSET; it might be better to return an error before changing anything. But it seems the "clear on error" behavior is fine for now, and it's a little tricky to do otherwise because it would mean we couldn't simply copy the full userspace state into kernel memory in one __copy_from_user(). This bug was found by syzkaller, which hit the above-mentioned WARN_ON_FPU(): WARNING: CPU: 1 PID: 0 at ./arch/x86/include/asm/fpu/internal.h:373 __switch_to+0x5b5/0x5d0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.13.0 #453 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff9ba2bc8e42c0 task.stack: ffffa78cc036c000 RIP: 0010:__switch_to+0x5b5/0x5d0 RSP: 0000:ffffa78cc08bbb88 EFLAGS: 00010082 RAX: 00000000fffffffe RBX: ffff9ba2b8bf2180 RCX: 00000000c0000100 RDX: 00000000ffffffff RSI: 000000005cb10700 RDI: ffff9ba2b8bf36c0 RBP: ffffa78cc08bbbd0 R08: 00000000929fdf46 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9ba2bc8e42c0 R13: 0000000000000000 R14: ffff9ba2b8bf3680 R15: ffff9ba2bf5d7b40 FS: 00007f7e5cb10700(0000) GS:ffff9ba2bf400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004005cc CR3: 0000000079fd5000 CR4: 00000000001406e0 Call Trace: Code: 84 00 00 00 00 00 e9 11 fd ff ff 0f ff 66 0f 1f 84 00 00 00 00 00 e9 e7 fa ff ff 0f ff 66 0f 1f 84 00 00 00 00 00 e9 c2 fa ff ff <0f> ff 66 0f 1f 84 00 00 00 00 00 e9 d4 fc ff ff 66 66 2e 0f 1f Here is a C reproducer. The expected behavior is that the program spin forever with no output. However, on a buggy kernel running on a processor with the "xsave" feature but without the "xsaves" feature (e.g. Sandy Bridge through Broadwell for Intel), within a second or two the program reports that the xmm registers were corrupted, i.e. were not restored correctly. With CONFIG_X86_DEBUG_FPU=y it also hits the above kernel warning. #define _GNU_SOURCE #include <stdbool.h> #include <inttypes.h> #include <linux/elf.h> #include <stdio.h> #include <sys/ptrace.h> #include <sys/uio.h> #include <sys/wait.h> #include <unistd.h> int main(void) { int pid = fork(); uint64_t xstate[512]; struct iovec iov = { .iov_base = xstate, .iov_len = sizeof(xstate) }; if (pid == 0) { bool tracee = true; for (int i = 0; i < sysconf(_SC_NPROCESSORS_ONLN) && tracee; i++) tracee = (fork() != 0); uint32_t xmm0[4] = { [0 ... 3] = tracee ? 0x00000000 : 0xDEADBEEF }; asm volatile(" movdqu %0, %%xmm0\n" " mov %0, %%rbx\n" "1: movdqu %%xmm0, %0\n" " mov %0, %%rax\n" " cmp %%rax, %%rbx\n" " je 1b\n" : "+m" (xmm0) : : "rax", "rbx", "xmm0"); printf("BUG: xmm registers corrupted! tracee=%d, xmm0=%08X%08X%08X%08X\n", tracee, xmm0[0], xmm0[1], xmm0[2], xmm0[3]); } else { usleep(100000); ptrace(PTRACE_ATTACH, pid, 0, 0); wait(NULL); ptrace(PTRACE_GETREGSET, pid, NT_X86_XSTATE, &iov); xstate[65] = -1; ptrace(PTRACE_SETREGSET, pid, NT_X86_XSTATE, &iov); ptrace(PTRACE_CONT, pid, 0, 0); wait(NULL); } return 1; } Note: the program only tests for the bug using the ptrace() system call. The bug can also be reproduced using the rt_sigreturn() system call, but only when called from a 32-bit program, since for 64-bit programs the kernel restores the FPU state from the signal frame by doing XRSTOR directly from userspace memory (with proper error checking). Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Rik van Riel <riel@redhat.com> Acked-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: kernel-hardening@lists.openwall.com Fixes: 0b29643a ("x86/xsaves: Change compacted format xsave area header") Link: http://lkml.kernel.org/r/20170922174156.16780-2-ebiggers3@gmail.com Link: http://lkml.kernel.org/r/20170923130016.21448-25-mingo@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
satoru takeuchi authored
commit 6d6d2829 upstream. `btrfs sub set-default` succeeds to set an ID which isn't corresponding to any fs/file tree. If such the bad ID is set to a filesystem, we can't mount this filesystem without specifying `subvol` or `subvolid` mount options. Fixes: 6ef5ed0d ("Btrfs: add ioctl and incompat flag to set the default mount subvol") Signed-off-by:
Satoru Takeuchi <satoru.takeuchi@gmail.com> Reviewed-by:
Qu Wenruo <quwenruo.btrfs@gmx.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Naohiro Aota authored
commit 78ad4ce0 upstream. btrfs_cmp_data_prepare() (almost) always returns 0 i.e. ignoring errors from gather_extent_pages(). While the pages are freed by btrfs_cmp_data_free(), cmp->num_pages still has > 0. Then, btrfs_extent_same() try to access the already freed pages causing faults (or violates PageLocked assertion). This patch just return the error as is so that the caller stop the process. Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Fixes: f4414602 ("btrfs: fix deadlock with extent-same and readpage") Reviewed-by:
-
Naohiro Aota authored
commit bb166d72 upstream. __del_reloc_root should be called before freeing up reloc_root->node. If not, calling __del_reloc_root() dereference reloc_root->node, causing the system BUG. Fixes: 6bdf131f ("Btrfs: don't leak reloc root nodes on error") Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Nicolai Stange authored
commit 9561475d upstream. The driver_override implementation is susceptible to a race condition when different threads are reading vs. storing a different driver override. Add locking to avoid the race condition. This is in close analogy to commit 62655397 ("driver core: platform: fix race condition with driver_override") from Adrian Salido. Fixes: 782a985d ("PCI: Introduce new device binding path using pci_dev.driver_override") Signed-off-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Jim Mattson authored
commit 51aa68e7 upstream. If L1 does not specify the "use TPR shadow" VM-execution control in vmcs12, then L0 must specify the "CR8-load exiting" and "CR8-store exiting" VM-execution controls in vmcs02. Failure to do so will give the L2 VM unrestricted read/write access to the hardware CR8. This fixes CVE-2017-12154. Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Jan H. Schönherr authored
commit 3a8b0677 upstream. The value of the guest_irq argument to vmx_update_pi_irte() is ultimately coming from a KVM_IRQFD API call. Do not BUG() in vmx_update_pi_irte() if the value is out-of bounds. (Especially, since KVM as a whole seems to hang after that.) Instead, print a message only once if we find that we don't have a route for a certain IRQ (which can be out-of-bounds or within the array). This fixes CVE-2017-1000252. Fixes: efc64404 ("KVM: x86: Update IRTE for posted-interrupts") Signed-off-by:
Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by:
-
Will Deacon authored
commit 760bfb47 upstream. We currently route pte translation faults via do_page_fault, which elides the address check against TASK_SIZE before invoking the mm fault handling code. However, this can cause issues with the path walking code in conjunction with our word-at-a-time implementation because load_unaligned_zeropad can end up faulting in kernel space if it reads across a page boundary and runs into a page fault (e.g. by attempting to read from a guard region). In the case of such a fault, load_unaligned_zeropad has registered a fixup to shift the valid data and pad with zeroes, however the abort is reported as a level 3 translation fault and we dispatch it straight to do_page_fault, despite it being a kernel address. This results in calling a sleeping function from atomic context: BUG: sleeping function called from invalid context at arch/arm64/mm/fault.c:313 in_atomic(): 0, irqs_disabled(): 0, pid: 10290 Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] [<ffffff8e016cd0cc>] ___might_sleep+0x134/0x144 [<ffffff8e016cd158>] __might_sleep+0x7c/0x8c [<ffffff8e016977f0>] do_page_fault+0x140/0x330 [<ffffff8e01681328>] do_mem_abort+0x54/0xb0 Exception stack(0xfffffffb20247a70 to 0xfffffffb20247ba0) [...] [<ffffff8e016844fc>] el1_da+0x18/0x78 [<ffffff8e017f399c>] path_parentat+0x44/0x88 [<ffffff8e017f4c9c>] filename_parentat+0x5c/0xd8 [<ffffff8e017f5044>] filename_create+0x4c/0x128 [<ffffff8e017f59e4>] SyS_mkdirat+0x50/0xc8 [<ffffff8e01684e30>] el0_svc_naked+0x24/0x28 Code: 36380080 d5384100 f9400800 9402566d (d4210000) ---[ end trace 2d01889f2bca9b9f ]--- Fix this by dispatching all translation faults to do_translation_faults, which avoids invoking the page fault logic for faults on kernel addresses. Reported-by:
Ankit Jain <ankijain@codeaurora.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 5371513f upstream. When the kernel is entered at EL2 on an ARMv8.0 system, we construct the EL1 pstate and make sure this uses the the EL1 stack pointer (we perform an exception return to EL1h). But if the kernel is either entered at EL1 or stays at EL2 (because we're on a VHE-capable system), we fail to set SPsel, and use whatever stack selection the higher exception level has choosen for us. Let's not take any chance, and make sure that SPsel is set to one before we decide the mode we're going to run in. Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Oleg Nesterov authored
commit 66a733ea upstream. As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end up using different filters. Once we drop ->siglock it is possible for task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC. Fixes: f8e529ed ("seccomp, ptrace: add support for dumping seccomp filters") Reported-by:
Chris Salls <chrissalls5@gmail.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> [tycho: add __get_seccomp_filter vs. open coding refcount_inc()] Signed-off-by:
Tycho Andersen <tycho@docker.com> [kees: tweak commit log] Signed-off-by:
-
Christoph Hellwig authored
commit f507b54d upstream. The job structure is allocated as part of the request, so we should not free it in the error path of bsg_prepare_job. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Vladis Dronov authored
commit e785fa0a upstream. nl80211_set_rekey_data() does not check if the required attributes NL80211_REKEY_DATA_{REPLAY_CTR,KEK,KCK} are present when processing NL80211_CMD_SET_REKEY_OFFLOAD request. This request can be issued by users with CAP_NET_ADMIN privilege and may result in NULL dereference and a system crash. Add a check for the required attributes presence. This patch is based on the patch by bo Zhang. This fixes CVE-2017-12153. References: https://bugzilla.redhat.com/show_bug.cgi?id=1491046 Fixes: e5497d76 ("cfg80211/nl80211: support GTK rekey offload") Reported-by:
bo Zhang <zhangbo5891001@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Andreas Gruenbacher authored
commit fc46820b upstream. In generic_file_llseek_size, return -ENXIO for negative offsets as well as offsets beyond EOF. This affects filesystems which don't implement SEEK_HOLE / SEEK_DATA internally, possibly because they don't support holes. Fixes xfstest generic/448. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steve French authored
commit 1013e760 upstream. Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Steve French authored
commit 0603c96f upstream. As long as signing is supported (ie not a guest user connection) and connection is SMB3 or SMB3.02, then validate negotiate (protect against man in the middle downgrade attacks). We had been doing this only when signing was required, not when signing was just enabled, but this more closely matches recommended SMB3 behavior and is better security. Suggested by Metze. Signed-off-by:
Jeremy Allison <jra@samba.org> Acked-by:
Stefan Metzmacher <metze@samba.org> Reviewed-by:
-
Steve French authored
commit 23586b66 upstream. Samba rejects SMB3.1.1 dialect (vers=3.1.1) negotiate requests from the kernel client due to the two byte pad at the end of the negotiate contexts. Signed-off-by:
-
Tyrel Datwyler authored
commit b537ca6f upstream. A reference to the parent device node is held by add_dt_node() for the node to be added. If the call to dlpar_configure_connector() fails add_dt_node() returns ENOENT and that reference is not freed. Add a call to of_node_put(parent_dn) prior to bailing out after a failed dlpar_configure_connector() call. Fixes: 8d5ff320 ("powerpc/pseries: Make dlpar_configure_connector parent node aware") Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Eric Biggers authored
commit 37863c43 upstream. Because keyctl_read_key() looks up the key with no permissions requested, it may find a negatively instantiated key. If the key is also possessed, we went ahead and called ->read() on the key. But the key payload will actually contain the ->reject_error rather than the normal payload. Thus, the kernel oopses trying to read the user_key_payload from memory address (int)-ENOKEY = 0x00000000ffffff82. Fortunately the payload data is stored inline, so it shouldn't be possible to abuse this as an arbitrary memory read primitive... Reproducer: keyctl new_session keyctl request2 user desc '' @s keyctl read $(keyctl show | awk '/user: desc/ {print $1}') It causes a crash like the following: BUG: unable to handle kernel paging request at 00000000ffffff92 IP: user_read+0x33/0xa0 PGD 36a54067 P4D 36a54067 PUD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 211 Comm: keyctl Not tainted 4.14.0-rc1 #337 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff90aa3b74c3c0 task.stack: ffff9878c0478000 RIP: 0010:user_read+0x33/0xa0 RSP: 0018:ffff9878c047bee8 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff90aa3d7da340 RCX: 0000000000000017 RDX: 0000000000000000 RSI: 00000000ffffff82 RDI: ffff90aa3d7da340 RBP: ffff9878c047bf00 R08: 00000024f95da94f R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f58ece69740(0000) GS:ffff90aa3e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000ffffff92 CR3: 0000000036adc001 CR4: 00000000003606f0 Call Trace: keyctl_read_key+0xac/0xe0 SyS_keyctl+0x99/0x120 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f58ec787bb9 RSP: 002b:00007ffc8d401678 EFLAGS: 00000206 ORIG_RAX: 00000000000000fa RAX: ffffffffffffffda RBX: 00007ffc8d402800 RCX: 00007f58ec787bb9 RDX: 0000000000000000 RSI: 00000000174a63ac RDI: 000000000000000b RBP: 0000000000000004 R08: 00007ffc8d402809 R09: 0000000000000020 R10: 0000000000000000 R11: 0000000000000206 R12: 00007ffc8d402800 R13: 00007ffc8d4016e0 R14: 0000000000000000 R15: 0000000000000000 Code: e5 41 55 49 89 f5 41 54 49 89 d4 53 48 89 fb e8 a4 b4 ad ff 85 c0 74 09 80 3d b9 4c 96 00 00 74 43 48 8b b3 20 01 00 00 4d 85 ed <0f> b7 5e 10 74 29 4d 85 e4 74 24 4c 39 e3 4c 89 e2 4c 89 ef 48 RIP: user_read+0x33/0xa0 RSP: ffff9878c047bee8 CR2: 00000000ffffff92 Fixes: 61ea0c0b ("KEYS: Skip key state checks when checking for possession") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
