This patch introduces the infrastructure to send batched subordinate
Command Response Queue descriptors, which are used by the ibmvnic
driver to send TX frame and RX buffer descriptors.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: add a driver shutdown callback

The final patch in this series adds a driver shutdown callback for
the IPA driver.  The patches leading up to that address some issues
encountered while ensuring that callback worked as expected:
  - The first just reports a little more information when channels
    or event rings are in unexpected states
  - The second patch recognizes a condition where an as-yet-unused
    channel does not require a reset during teardown
  - The third patch explicitly ignores a certain error condition,
    because it can't be avoided, and is harmless if it occurs
  - The fourth properly handles requests to retry a channel HALT
    request
  - The fifth makes a second attempt to stop modem activity during
    shutdown if it's busy

The shutdown callback is implemented by calling the existing remove
callback function (reporting if that returns an error).
====================

Link: https://lore.kernel.org/r/20201119224929.23819-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A system shutdown can happen at essentially any time, and it's
possible that the IPA driver is busy when a shutdown is underway.
IPA hardware accesses IMEM and SMEM memory regions using an IOMMU,
and at some point during shutdown, needed I/O mappings could become
invalid.  This could be disastrous for any "in flight" IPA activity.

Avoid this by defining a new driver shutdown callback that stops all
IPA activity and cleanly shuts down the driver.  It merely calls the
driver's existing remove callback, reporting the error if it returns
one.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The IPA driver remove callback, ipa_remove(), calls ipa_modem_stop()
if the setup stage of initialization is complete.  If a concurrent
call to ipa_modem_start() or ipa_modem_stop() has begin but not
completed, ipa_modem_stop() can return an error (-EBUSY).

The next patch adds a driver shutdown callback, which will simply
call ipa_remove().  We really want our shutdown callback to clean
things up.  So add a single retry to the ipa_modem_stop() call in
ipa_remove() after a short (millisecond) delay.  This offers no
guarantee the shutdown will complete successfully, but we'll at
least try a little harder before giving up.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When stopping an AP RX channel, there can be a transient period
while the channel enters STOP_IN_PROC state before reaching the
final STOPPED state.  In that case we make another attempt to stop
the channel.

Similarly, when stopping a modem channel (using a GSI generic
command issued from the AP), it's possible that multiple attempts
will be required before the channel reaches STOPPED state.

Add a field to the GSI structure to record an errno representing the
result code provided when a generic command completes.  If the
result learned in gsi_isr_gp_int1() is RETRY, record -EAGAIN in the
result code, otherwise record 0 for success, or -EIO for any other
result.

If we time out nf gsi_generic_command() waiting for the command to
complete, return -ETIMEDOUT (as before).  Otherwise return the
result stashed by gsi_isr_gp_int1().

Add a loop in gsi_modem_channel_halt() to reissue the HALT command
if the result code indicates -EAGAIN.  Limit this to 10 retries
(after the initial attempt).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

IPA v4.2 has a hardware quirk that requires the AP to allocate GSI
channels for the modem to use.  It is recommended that these modem
channels get stopped (with a HALT generic command) by the AP when
its IPA driver gets removed.

The AP has no way of knowing the current state of a modem channel.
So when the IPA driver issues a HALT command it's possible the
channel is not running, and in that case we get an error indication.
This error simply means we didn't need to stop the channel, so we
can ignore it.

This patch adds an explanation for this situation, and arranges for
this condition to *not* report an error message.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the rmnet_ipa0 network device has not been opened at the time
we remove or shut down the IPA driver, its underlying TX and RX
GSI channels will not have been started, and they will still be
in ALLOCATED state.

The RESET command on a channel is meant to return a channel to
ALLOCATED state after it's been stopped.  But if it was never
started, its state will still be ALLOCATED, the RESET command
is not required.

Quietly skip doing the reset without printing an error message if a
channel is already in ALLOCATED state when we request it be reset.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When a GSI command is used to change the state of a channel or event
ring we check the state before and after the command to ensure it is
as expected.  If not, we print an error message, but it does not
include the channel or event ring id, and it easily can.  Add the
channel or event ring id to these error messages.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: platform-specific clock and interconnect rates

This series changes the way the IPA core clock rate and the
bandwidth parameters for interconnects are specified.  Previously
these were specified with hard-wired constants, with the same values
used for the SDM845 and SC7180 platforms.  Now these parameters are
recorded in platform-specific configuration data.

For the SC7180 this means we use an all-new core clock rate and
interconnect parameters.

Additionally, while developing this I learned that the average
bandwidth setting for two of the interconnects is ignored (on both
platforms).  Zero is now used explicitly as that unused bandwidth
value.  This means the SDM845 bandwidth settings are also changed
by this series.
====================

Link: https://lore.kernel.org/r/20201119224041.16066-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Stop assuming a fixed IPA core clock rate and interconnect
bandwidths.  Use the configuration data defined for these
things instead.  Get rid of the previously-used constants.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Populate the core clock rate and interconnect average and peak
bandwidth data for SDM845 and SC7180 in their configuration data
files.  At this point we still don't *use* this data.

Note that SC7180 actually defines a new core clock rate (100 MHz
instead of 75 MHz) and new interconnect bandwidth values.  They
will be activated in the next commit, which uses the configured
values rather than the fixed constants.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Define a new type of configuration data, used to initialize the
IPA core clock and interconnects.  This is the first of three
patches, and defines the data types and interface but doesn't
yet use them.

Switch the return value if there is no matching configuration data
to ENODEV instead of ENOTSUPP (to avoid using the nonstandard errno).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The mdio_bus may have dependencies from GPIO controller and so got
deferred. Now it will print error message every time -EPROBE_DEFER is
returned which from:
__mdiobus_register()
 |-devm_gpiod_get_optional()
without actually identifying error code.

"mdio_bus 4a101000.mdio: mii_bus 4a101000.mdio couldn't get reset GPIO"

Hence, suppress error message for devm_gpiod_get_optional() returning
-EPROBE_DEFER case by using dev_err_probe().
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201119203446.20857-1-grygorii.strashko@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tiny improvement, let dev_err_probe() deal with EPROBE_DEFER.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/b0c4ebcf-2047-e933-b890-8a20e4bdb19f@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some chip versions have a hw bug resulting in lost door bell rings.
To work around this the doorbell is also rung whenever we still have
tx descriptors in flight after having cleaned up tx descriptors.
These PCI(e) writes come at a cost, therefore let's reduce the number
of extra doorbell rings.
If skb is NULL then this means:
- last cleaned-up descriptor belongs to a skb with at least one fragment
  and last fragment isn't marked as sent yet
- hw is in progress sending the skb, therefore no extra doorbell ring
  is needed for this skb
- once last fragment is marked as transmitted hw will trigger
  a tx done interrupt and we come here again (with skb != NULL)
  and ring the doorbell if needed
Therefore skip the workaround doorbell ring if skb is NULL.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/0a15a83c-aecf-ab51-8071-b29d9dcd529a@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: More miscellaneous MPTCP fixes

Here's another batch of fixup and enhancement patches that we have
collected in the MPTCP tree.

Patch 1 removes an unnecessary flag and related code.

Patch 2 fixes a bug encountered when closing fallback sockets.

Patches 3 and 4 choose a better transmit subflow, with a self test.

Patch 5 adjusts tracking of unaccepted subflows

Patches 6-8 improve handling of long ADD_ADDR options, with a test.

Patch 9 more reliably tracks the MPTCP-level window shared with peers.

Patch 10 sends MPTCP-level acknowledgements more aggressively, so the
peer can send more data without extra delay.
====================

Link: https://lore.kernel.org/r/20201119194603.103158-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Send timely MPTCP-level ack is somewhat difficult when
the insertion into the msk receive level is performed
by the worker.

It needs TCP-level dup-ack to notify the MPTCP-level
ack_seq increase, as both the TCP-level ack seq and the
rcv window are unchanged.

We can actually avoid processing incoming data with the
worker, and let the subflow or recevmsg() send ack as needed.

When recvmsg() moves the skbs inside the msk receive queue,
the msk space is still unchanged, so tcp_cleanup_rbuf() could
end-up skipping TCP-level ack generation. Anyway, when
__mptcp_move_skbs() is invoked, a known amount of bytes is
going to be consumed soon: we update rcv wnd computation taking
them in account.

Additionally we need to explicitly trigger tcp_cleanup_rbuf()
when recvmsg() consumes a significant amount of the receive buffer.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

OoO handling attempts to detect when packet is out-of-window by testing
current ack sequence and remaining space vs. sequence number.

This doesn't work reliably. Store the highest allowed sequence number
that we've announced and use it to detect oow packets.

Do this when mptcp options get written to the packet (wire format).
For this to work we need to move the write_options call until after
stack selected a new tcp window.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added IPv6 support for do_transfer, and the test cases for
ADD_ADDR IPv6.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When ADD_ADDR suboption includes an IPv6 address, the size is 28 octets.
It will not fit when other MPTCP suboptions are included in this packet,
e.g. DSS. So here we send out an ADD_ADDR dedicated packet to carry only
ADD_ADDR suboption, no other MPTCP suboptions.

In mptcp_pm_announce_addr, we check whether this is an IPv6 ADD_ADDR.
If it is, we set the flag MPTCP_ADD_ADDR_IPV6 to true. Then we call
mptcp_pm_nl_add_addr_send_ack to sent out a new pure ACK packet.

In mptcp_established_options_add_addr, we check whether this is a pure
ACK packet for ADD_ADDR. If it is, we drop all other MPTCP suboptions
in this packet, only put ADD_ADDR suboption in it.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch changed the 'add_addr_signal' type from bool to char, so that
we could encode the addr type there.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This will simplify all operation dealing with subflows
before accept time (e.g. data fin processing, add_addr).

The join list is already flushed by mptcp_stream_accept()
before returning the newly created msk to the user space.

This also fixes an potential bug present into the old code:
conn_list was manipulated without helding the msk lock
in mptcp_stream_accept().
Tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a test case where a link fails with multiple subflows.
The expectation is that MPTCP will transmit any data that
could not be delivered via the failed link on another subflow.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In case a subflow path is blocked, MPTCP-level retransmit may not take
place anymore because such subflow is likely to have unacked data left
in its write queue.

Ignore subflows that have experienced loss and test next candidate.

Fixes: 3b1d6210 ("mptcp: implement and use MPTCP-level retransmission")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We need to cope with some more state transition for
fallback sockets, or could still end-up moving to TCP_CLOSE
too early and avoid spooling some pending data

Fixes: e16163b6 ("mptcp: refactor shutdown and close")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Only mptcp_close() can actually cancel the workqueue,
no need to add and use this flag.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
mlxsw: Add support for nexthop objects

This patch set adds support for nexthop objects in mlxsw. Nexthop
objects are treated as another front-end for programming nexthops, in
addition to the existing IPv4 and IPv6 front-ends.

Patch #1 registers a listener to the nexthop notification chain and
parses the nexthop information into the existing mlxsw data structures
that are already used by the IPv4 and IPv6 front-ends. Blackhole
nexthops are currently rejected. Support will be added in a follow-up
patch set.

Patch #2 extends mlxsw to resolve its internal nexthop objects from the
nexthop identifier encoded in the FIB info of the notified routes.

Patch #3 finally removes the limitation of rejecting routes that use
nexthop objects.

Patch #4 adds a selftest.

Patches #5-#8 add generic forwarding selftests that can be used with
veth pairs or physical loopbacks.
====================

Link: https://lore.kernel.org/r/20201119130848.407918-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a nexthop objects version of gre_multipath.sh. Unlike the original
test, it also tests IPv6 overlay which is not possible with the legacy
nexthop implementation. See commit 9a2ad362 ("selftests: forwarding:
gre_multipath: Drop IPv6 tests") for more info.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In a similar fashion to router_multipath.sh and its nexthop objects
version router_mpath_nh.sh, create a nexthop objects version of
router.sh.

It reuses the same topology, but uses device-only nexthop objects
instead of legacy ones.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In addition to IPv4 multipath tests with IPv4 nexthops, also test IPv4
multipath with nexthops that use IPv6 link-local addresses.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

routing_nh_obj() is used to configure the nexthop objects employed by
the test, but it is called twice resulting in "RTNETLINK answers: File
exists" messages.

Remove the first call, so that the function is only called after
setup_wait(), when all the interfaces are up and ready.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Test that unsupported nexthop objects are rejected and that offload
indication is correctly set on: nexthop objects, nexthop group objects
and routes associated these objects.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Now that the driver supports nexthop objects, the check is no longer
necessary. Remove it.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the FIB info (i.e, 'struct fib_info', 'struct fib6_info') uses a
nexthop object, then use the object's identifier to resolve the nexthop
group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Register a listener to the nexthop notification chain and parse notified
nexthop objects into the existing mlxsw nexthop data structures.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If dsa_switch_ops::port_txtstamp() returns false, clone will be freed
immediately. Shouldn't store a pointer to freed memory.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201119110906.25558-1-ceggers@arri.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Antonio Cardace says:

====================
netdevsim: add ethtool coalesce and ring settings

Output of ethtool-ring.sh and ethtool-coalesce.sh selftests:

  # ./ethtool-ring.sh
  PASSED all 4 checks
  # ./ethtool-coalesce.sh
  PASSED all 22 checks
  # ./ethtool-pause.sh
  PASSED all 7 checks
====================

Link: https://lore.kernel.org/r/20201118204522.5660-1-acardace@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add scripts to test ring and coalesce settings
of netdevsim.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As pointed out by Michal Kubecek, getting the name
with the previous approach was racy, it's better
and easier to get the name of the device with this
patch's approach.

Essentialy the function doesn't need to exist
anymore as it's a simple 'ls' command.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Factor out some useful functions so that they can be reused
by other ethtool-netdevsim scripts.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>