When using pthreads, one has to compile and link with -lpthread,
otherwise e.g. glibc is not guaranteed to be reentrant.

This replaces -lpthread.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When calling vring_unmap_desc_packed(), it will not encounter the
situation that the flags contains VRING_DESC_F_INDIRECT. So remove this
logic.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220224110402.108161-4-xuanzhuo@linux.alibaba.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

When calling vring_unmap_one_split_indirect(), it will not encounter the
situation that the flags contains VRING_DESC_F_INDIRECT. So remove this
logic.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220224110402.108161-3-xuanzhuo@linux.alibaba.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

The actual parameter handled by vring_unmap_state_packed() is that
vring_desc_extra, so this function should use "extra" instead of "state".
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220224110402.108161-2-xuanzhuo@linux.alibaba.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Allow an admin creating a vdpa device to specify the max MTU for the
net device.

For example, to create a device with max MTU of 1000, the following
command can be used:

$ vdpa dev add name vdpa-a mgmtdev auxiliary/mlx5_core.sf.1 mtu 1000

This configuration mechanism assumes that vdpa is the sole real user of
the function. mlx5_core could theoretically change the mtu of the
function using the ip command on the mlx5_core net device but this
should not be done.

Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220221121927.194728-1-elic@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Suggested by Gonglei, rename virtio_crypto_algs.c to
virtio_crypto_skcipher_algs.c. Also minor changes for function name.
Thus the function of source files get clear: skcipher services in
virtio_crypto_skcipher_algs.c and akcipher services in
virtio_crypto_akcipher_algs.c.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-5-pizhenwei@bytedance.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>

Support rsa & pkcs1pad(rsa,sha1) with priority 150.

Test with QEMU built-in backend, it works fine.
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
  - both public key & private key
  - create/close session
  - encrypt/decrypt/sign/verify basic driver operation
  - also test with kernel crypto layer(pkey add/query)

All the cases work fine.

rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=226

openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der

PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID

keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0

echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec

echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1

echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec

echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1

[1 compiling warning during development]
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-4-pizhenwei@bytedance.comReviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org> #Kconfig tweaks
Link: https://lore.kernel.org/r/20220308205309.2192502-1-nathan@kernel.orgSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Introduce asymmetric service definition, asymmetric operations and
several well known algorithms.
Co-developed-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-3-pizhenwei@bytedance.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>

Base on the lastest virtio crypto spec, define VIRTIO_CRYPTO_NOSPC.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-2-pizhenwei@bytedance.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This patch adds the definition of VIRTIO_F_IN_ORDER feature bit
in the relevant header file to make it available in QEMU's
linux standard header file virtio_config.h, which is updated using
scripts/update-linux-headers.sh
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Link: https://lore.kernel.org/r/20220215053430.24650-1-gdawar@xilinx.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Since commit b1123ea6 ("mm: balloon: use general non-lru movable page
feature"), these functions are called via balloon_aops callbacks. They're
not called directly outside this file. So make them static and clean up
the relevant code.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220125132221.2220-1-linmiaohe@huawei.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>

This commit introduces a new cacheline aligned layout for
ifcvf_hw.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20220222115428.998334-6-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

On some platforms/devices, there may not be enough MSI vectors
allocated for the virtqueues and config changes. In such a case,
the interrupt sources(virtqueues, config changes) must share
an IRQ/vector, to avoid initialization failures, keep
the device functional.

This commit handles three cases:
(1) number of the allocated vectors == the number of virtqueues + 1
(config changes), every virtqueue and the config interrupt has
a separated vector/IRQ, the best and the most likely case.
(2) number of the allocated vectors is less than the best case, but
greater than 1. In this case, all virtqueues share a vector/IRQ,
the config interrupt has a separated vector/IRQ
(3) only one vector is allocated, in this case, the virtqueues and
the config interrupt share a vector/IRQ. The worst and most
unlikely case.

Otherwise, it needs to fail.

This commit introduces some helper functions:
ifcvf_set_vq_vector() and ifcvf_set_config_vector() sets virtqueue
vector and config vector in the device config space, so that
the device can send interrupt DMA.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20220222115428.998334-5-lingshan.zhu@intel.comSigned-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220315124130.1710030-1-trix@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This commit implements a MSIX vector allocation helper
for vqs and config interrupts.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20220222115428.998334-4-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

When irq number is negative(e.g., -EINVAL), the virtqueue
may be disabled or the virtqueues are sharing a device irq.
In such case, we should not setup irq offloading for a virtqueue.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20220222115428.998334-3-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This commit discards ifcvf_ioreadX()/writeX(), use virtio pci
modern IO helpers instead
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20220222115428.998334-2-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

In vhost_enable_notify() we enable the notifications and we read
the avail index to check if new buffers have become available in
the meantime.

We are not caching the avail index, so when the device will call
vhost_get_vq_desc(), it will find the old value in the cache and
it will read the avail index again.

It would be better to refresh the cache every time we read avail
index, so let's change vhost_enable_notify() caching the value in
`avail_idx` and compare it with `last_avail_idx` to check if there
are new buffers available.

We don't expect a significant performance boost because
the above path is not very common, indeed vhost_enable_notify()
is often called with unlikely(), expecting that avail index has
not been updated.

We ran virtio-test/vhost-test and noticed minimal improvement as
expected. To stress the patch more, we modified vhost_test.ko to
call vhost_enable_notify()/vhost_disable_notify() on every cycle
when calling vhost_get_vq_desc(); in this case we observed a more
evident improvement, with a reduction of the test execution time
of about 3.7%.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220121153108.187291-1-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

This enables virtio-mem device support by allowing to enable the
corresponding kernel config option (CONFIG_VIRTIO_MEM) on the
architecture.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220119010551.181405-1-gshan@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm fix from Paolo Bonzini:
 "Fix for the SLS mitigation, which makes a 'SETcc/RET' pair grow
  to 'SETcc/RET/INT3'.

  This doesn't fit in 4 bytes any more, so the alignment has to
  change to 8 for this case"

* tag 'for-linus-5.17' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm/emulate: Fix SETcc emulation function offsets with SLS

Pull input fixes from Dmitry Torokhov:
 "Two driver fixes:

   - a fix for zinitix touchscreen to properly report contacts

   - a fix for aiptek tablet driver to be more resilient to devices with
     incorrect descriptors"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: aiptek - properly check endpoint type
  Input: zinitix - do not report shadow fingers

The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.

The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.

However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:

  15:   0f 90 c0                seto   %al
  18:   c3                      ret
  19:   cc                      int3
  1a:   0f 1f 00                nopl   (%rax)
  1d:   0f 91 c0                setno  %al
  20:   c3                      ret
  21:   cc                      int3
  22:   0f 1f 00                nopl   (%rax)
  25:   0f 92 c0                setb   %al
  28:   c3                      ret
  29:   cc                      int3

and this explodes like this:

  int3: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 2435 Comm: qemu-system-x86 Not tainted 5.17.0-rc8-sls #1
  Hardware name: Dell Inc. Precision WorkStation T3400  /0TP412, BIOS A14 04/30/2012
  RIP: 0010:setc+0x5/0x8 [kvm]
  Code: 00 00 0f 1f 00 0f b6 05 43 24 06 00 c3 cc 0f 1f 80 00 00 00 00 0f 90 c0 c3 cc 0f \
	  1f 00 0f 91 c0 c3 cc 0f 1f 00 0f 92 c0 c3 cc <0f> 1f 00 0f 93 c0 c3 cc 0f 1f 00 \
	  0f 94 c0 c3 cc 0f 1f 00 0f 95 c0
  Call Trace:
   <TASK>
   ? x86_emulate_insn [kvm]
   ? x86_emulate_instruction [kvm]
   ? vmx_handle_exit [kvm_intel]
   ? kvm_arch_vcpu_ioctl_run [kvm]
   ? kvm_vcpu_ioctl [kvm]
   ? __x64_sys_ioctl
   ? do_syscall_64
   ? entry_SYSCALL_64_after_hwframe
   </TASK>

Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.

Fixes: e463a09a ("x86: Add straight-line-speculation mitigation")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net
[Add a comment and a bit of safety checking, since this is going to be changed
 again for IBT support. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull ARM SoC fix from Arnd Bergmann:
 "Here is one last regression fix for 5.17, reverting a patch that went
  into 5.16 as a cleanup that ended up breaking external interrupts on
  Layerscape chips.

  The revert makes it work again, but also reintroduces a build time
  warning about the nonstandard DT binding that will have to be dealt
  with in the future"

* tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells"

Pull SCSI fixes from James Bottomley:
 "Two small(ish) fixes, both in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Finish scsi_cmnd before dropping the spinlock
  scsi: mpt3sas: Page fault in reply q processing

Merge tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Avoid iterating empty evlist, fixing a segfault with 'perf stat --null'

 - Ignore case in topdown.slots check, fixing issue with Intel Icelake
   JSON metrics.

 - Fix symbol size calculation condition for fixing up corner case
   symbol end address obtained from Kallsyms.

* tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf parse-events: Ignore case in topdown.slots check
  perf evlist: Avoid iteration for empty evlist.
  perf symbols: Fix symbol size calculation condition

Pull char/misc driver fix from Greg KH:
 "Here is a single driver fix for 5.17-final that has been submitted
  many times but I somehow missed it in my patch queue:

   - fix for counter sysfs code for reported problem

  This has been in linux-next all week with no reported issues"

* tag 'char-misc-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  counter: Stop using dev_get_drvdata() to get the counter device

Pull USB fixes from Greg KH:
 "Here are some small remaining USB fixes for 5.17-final.

  They include:

   - two USB gadget driver fixes for reported problems

   - usbtmc driver fix for syzbot found issues

   - musb patch partial revert to resolve a reported regression.

  All of these have been in linux-next this week with no reported
  problems"

* tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: Fix use-after-free bug by not setting udc->dev.driver
  usb: usbtmc: Fix bug in pipe direction for control transfers
  partially Revert "usb: musb: Set the DT node on the child device"
  usb: gadget: rndis: prevent integer overflow in rndis_set_response()

An issue with icelakex metrics:

  https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json?h=perf/core&id=65eab2bc7dab326ee892ec5a4c749470b368b51a#n48

That causes the slots not to be first.

Fixes: 94dbfd67 ("perf parse-events: Architecture specific leader override")
Reported-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220317224309.543736-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As seen with 'perf stat --null ..' and reported in:
https://lore.kernel.org/lkml/YjCLcpcX2peeQVCH@kernel.org/

v2. Avoids setting evsel in the empty list case as suggested by Jiri Olsa.

    Committer testing:

Before:

  $  perf stat --null sleep 1
  Segmentation fault (core dumped)
  $

After:

  $  perf stat --null sleep 1

   Performance counter stats for 'sleep 1':

         1.010340646 seconds time elapsed

         0.001420000 seconds user
         0.000000000 seconds sys
  $

Fixes: 472832d2 ("perf evlist: Refactor evlist__for_each_cpu()")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220317231643.550902-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Before this patch, the symbol end address fixup to be called, needed two
conditions being met:

  if (prev->end == prev->start && prev->end != curr->start)

Where
  "prev->end == prev->start" means that prev is zero-long
                             (and thus needs a fixup)
and
  "prev->end != curr->start" means that fixup hasn't been applied yet

However, this logic is incorrect in the following situation:

*curr  = {rb_node = {__rb_parent_color = 278218928,
  rb_right = 0x0, rb_left = 0x0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 40, type = 2 '\002',
  binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}

*prev = {rb_node = {__rb_parent_color = 278219041,
  rb_right = 0x109548b0, rb_left = 0x109547c0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 12, type = 2 '\002',
  binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1095486e "optinsn_slot"}

In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.

After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.

Fixes: 3b01a413 ("perf symbols: Improve kallsyms symbol end addr calculation")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull arm64 fixes from Catalin Marinas:
 "Fix two compiler warnings introduced by recent commits: pointer
  arithmetic and double initialisation of struct field"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: errata: avoid duplicate field initializer
  arm64: fix clang warning about TRAMP_VALIAS

Pull cifs fix from Steve French:
 "Small fix for regression in multiuser mounts.

  The additional improvements suggested by Ronnie to make the server and
  session status handling code easier to read can wait for the 5.18
  merge window."

* tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix incorrect session setup check for multiuser mounts

Pull block fixes from Jens Axboe:

 - Revert of a nvme target feature (Hannes)

 - Fix a memory leak with rq-qos (Ming)

* tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-block:
  nvmet: revert "nvmet: make discovery NQN configurable"
  block: release rq qos structures for queue without disk

Pull drm fixes from Dave Airlie:
 "A few minor changes to finish things off, one mgag200 regression, imx
  fix and couple of panel changes.

  imx:
   - Don't test bus flags in atomic check

  mgag200:
   - Fix PLL setup on some models

  panel:
   - Fix bpp settings on Innolux G070Y2-L01
   - Fix DRM_PANEL_EDP Kconfig dependencies"

* tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm:
  drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
  drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
  drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
  drm/mgag200: Fix PLL setup for g200wb and g200ew

The '.type' field is initialized both in place and in the macro
as reported by this W=1 warning:

arch/arm64/include/asm/cpufeature.h:281:9: error: initialized field overwritten [-Werror=override-init]
  281 |         (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
      |         ^
arch/arm64/kernel/cpu_errata.c:136:17: note: in expansion of macro 'ARM64_CPUCAP_LOCAL_CPU_ERRATUM'
  136 |         .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,                         \
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:145:9: note: in expansion of macro 'ERRATA_MIDR_RANGE'
  145 |         ERRATA_MIDR_RANGE(m, var, r_min, var, r_max)
      |         ^~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:613:17: note: in expansion of macro 'ERRATA_MIDR_REV_RANGE'
  613 |                 ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
      |                 ^~~~~~~~~~~~~~~~~~~~~
arch/arm64/include/asm/cpufeature.h:281:9: note: (near initialization for 'arm64_errata[18].type')
  281 |         (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
      |         ^

Remove the extranous initializer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1dd498e5 ("KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata")
Link: https://lore.kernel.org/r/20220316183800.1546731-1-arnd@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:

arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
                return (char *)TRAMP_VALIAS + SZ_2K * slot;

Change the addition to something clang does not complain about.

Fixes: bd09128d ("arm64: Add percpu vectors for EL1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

 * drm/imx: Don't test bus flags in atomic check
 * drm/mgag200: Fix PLL setup on some models
 * drm/panel: Fix bpp settings on Innolux G070Y2-L01; Fix DRM_PANEL_EDP
   Kconfig dependencies
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YjMNcqOuDFDoe+EN@linux-uq9g

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, ipsec, and wireless.

  A few last minute revert / disable and fix patches came down from our
  sub-trees. We're not waiting for any fixes at this point.

  Current release - regressions:

   - Revert "netfilter: nat: force port remap to prevent shadowing
     well-known ports", restore working conntrack on asymmetric paths

   - Revert "ath10k: drop beacon and probe response which leak from
     other channel", restore working AP and mesh mode on QCA9984

   - eth: intel: fix hang during reboot/shutdown

  Current release - new code bugs:

   - netfilter: nf_tables: disable register tracking, it needs more work
     to cover all corner cases

  Previous releases - regressions:

   - ipv6: fix skb_over_panic in __ip6_append_data when (admin-only)
     extension headers get specified

   - esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return
     value more selectively

   - bnx2x: fix driver load failure when FW not present in initrd

  Previous releases - always broken:

   - vsock: stop destroying unrelated sockets in nested virtualization

   - packet: fix slab-out-of-bounds access in packet_recvmsg()

  Misc:

   - add Paolo Abeni to networking maintainers!"

* tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (26 commits)
  iavf: Fix hang during reboot/shutdown
  net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
  net: bcmgenet: skip invalid partial checksums
  bnx2x: fix built-in kernel driver load failure
  net: phy: mscc: Add MODULE_FIRMWARE macros
  net: dsa: Add missing of_node_put() in dsa_port_parse_of
  net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()
  Revert "ath10k: drop beacon and probe response which leak from other channel"
  hv_netvsc: Add check for kvmalloc_array
  iavf: Fix double free in iavf_reset_task
  ice: destroy flow director filter mutex after releasing VSIs
  ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()
  Add Paolo Abeni to networking maintainers
  atm: eni: Add check for dma_map_single
  net/packet: fix slab-out-of-bounds access in packet_recvmsg()
  net: mdio: mscc-miim: fix duplicate debugfs entry
  net: phy: marvell: Fix invalid comparison in the resume and suspend functions
  esp6: fix check on ipv6_skip_exthdr's return value
  net: dsa: microchip: add spi_device_id tables
  netfilter: nf_tables: disable register tracking
  ...

Pull ACPI fix from Rafael Wysocki:
 "Revert recent commit that caused multiple systems to misbehave due to
  firmware issues"

* tag 'acpi-5.17-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"