- 05 Nov, 2019 6 commits
-
-
Matthew Bobrowski authored
In preparation for porting across the ext4 direct I/O path over to the iomap infrastructure, split up the IOMAP_WRITE branch that's currently within ext4_iomap_begin() into a separate helper ext4_alloc_iomap(). This way, when we add in the necessary code for direct I/O, we don't end up with ext4_iomap_begin() becoming a monstrous twisty maze. Signed-off-by:
Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/50eef383add1ea529651640574111076c55aca9f.1572949325.git.mbobrowski@mbobrowski.orgSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Matthew Bobrowski authored
Separate the iomap field population code that is currently within ext4_iomap_begin() into a separate helper ext4_set_iomap(). The intent of this function is self explanatory, however the rationale behind taking this step is to reeduce the overall clutter that we currently have within the ext4_iomap_begin() callback. Signed-off-by:
-
Matthew Bobrowski authored
This patch addresses what Dave Chinner had discovered and fixed within commit: 7684e2c4. This changes does not have any user visible impact for ext4 as none of the current users of ext4_iomap_begin() that extend files depend on IOMAP_F_DIRTY. When doing a direct IO that spans the current EOF, and there are written blocks beyond EOF that extend beyond the current write, the only metadata update that needs to be done is a file size extension. However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that there is IO completion metadata updates required, and hence we may fail to correctly sync file size extensions made in IO completion when O_DSYNC writes are being used and the hardware supports FUA. Hence when setting IOMAP_F_DIRTY, we need to also take into account whether the iomap spans the current EOF. If it does, then we need to mark it dirty so that IO completion will call generic_write_sync() to flush the inode size update to stable storage correctly. Signed-off-by:
-
Matthew Bobrowski authored
This patch updates the lock pattern in ext4_direct_IO_read() to not block on inode lock in cases of IOCB_NOWAIT direct I/O reads. The locking condition implemented here is similar to that of 942491c9 ("xfs: fix AIM7 regression"). Fixes: 16c54688 ("ext4: Allow parallel DIO reads") Signed-off-by:
-
Matthew Bobrowski authored
For the direct I/O changes that follow in this patch series, we need to accommodate for the case where the block mapping flags passed through to ext4_map_blocks() result in m_flags having both EXT4_MAP_MAPPED and EXT4_MAP_UNWRITTEN bits set. In order for any allocated unwritten extents to be converted correctly in the ->end_io() handler, the iomap->type must be set to IOMAP_UNWRITTEN for cases where the EXT4_MAP_UNWRITTEN bit has been set within m_flags. Hence the reason why we need to reshuffle this conditional statement around. This change is a no-op for DAX as the block mapping flags passed through to ext4_map_blocks() i.e. EXT4_GET_BLOCKS_CREATE_ZERO never results in both EXT4_MAP_MAPPED and EXT4_MAP_UNWRITTEN being set at once. Signed-off-by:
-
Theodore Ts'o authored
-
- 01 Nov, 2019 1 commit
-
-
Theodore Ts'o authored
-
- 29 Oct, 2019 1 commit
-
-
Joseph Qi authored
We've already check if it is READ iov_iter, no need check again. Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
- 22 Oct, 2019 5 commits
-
-
Ritesh Harjani authored
All support is now added for blocksize < pagesize for dioread_nolock. This patch removes those checks which disables dioread_nolock feature for blocksize != pagesize. Signed-off-by:
-
Ritesh Harjani authored
This patch adds the support for blocksize < pagesize for dioread_nolock feature. Since in case of blocksize < pagesize, we can have multiple small buffers of page as unwritten extents, we need to maintain a vector of these unwritten extents which needs the conversion after the IO is complete. Thus, we maintain a list of tuple <offset, size> pair (io_end_vec) for this & traverse this list to do the unwritten to written conversion. Signed-off-by:
-
Ritesh Harjani authored
This patch refactors mpage_map_and_submit_buffers to take out the page buffers processing, as a separate function. This will be required to add support for blocksize < pagesize for dioread_nolock feature. No functionality change in this patch. Signed-off-by:
-
Ritesh Harjani authored
This patch just brings in the API for conversion of unwritten io_end_vec extents which will be required for blocksize < pagesize support for dioread_nolock feature. No functional changes in this patch. Signed-off-by:
-
Ritesh Harjani authored
Let's keep uniform naming convention for ext4_submit_io (io) & ext4_end_io_t (io_end) structures, to avoid any confusion. No functionality change in this patch. Signed-off-by:
-
- 21 Oct, 2019 27 commits
-
-
Goldwyn Rodrigues authored
The srcmap is used to identify where the read is to be performed from. It is passed to ->iomap_begin, which can fill it in if we need to read data for partially written blocks from a different location than the write target. The srcmap is only supported for buffered writes so far. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> [hch: merged two patches, removed the IOMAP_F_COW flag, use iomap as srcmap if not set, adjust length down to srcmap end as well] Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Christoph Hellwig authored
Instead of keeping a separate unnamed state for uninitialized iomaps, renumber IOMAP_HOLE to zero so that an uninitialized iomap is treated as a hole. Suggested-by:
-
Christoph Hellwig authored
Use the existing iomap write_begin code to read the pages unshared by iomap_file_unshare. That avoids the extra ->readpage call and extent tree lookup currently done by read_mapping_page. Signed-off-by:
-
Christoph Hellwig authored
That keeps the function a little easier to understand, and easier to modify for pending enhancements. Signed-off-by:
-
Christoph Hellwig authored
xfs_file_dirty is used to unshare reflink blocks. Rename the function to xfs_file_unshare to better document that purpose, and skip iomaps that are not shared and don't need zeroing. This will allow to simplify the caller. Signed-off-by:
-
Christoph Hellwig authored
All callers pass AOP_FLAG_NOFS, so lift that flag to iomap_write_begin to allow reusing the flags arguments for an internal flags namespace soon. Also remove the local index variable that is only used once. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Allison Collins <allison.henderson@oracle.com> Reviewed-by:
-
Christoph Hellwig authored
The documentation for IOMAP_F_* is a bit disorganized, and doesn't mention the fact that most flags are set by the file system and consumed by the iomap core, while IOMAP_F_SIZE_CHANGED is set by the core and consumed by the file system. Signed-off-by:
-
Darrick J. Wong authored
If we encounter an IO error during writeback, log the inode, offset, and sector number of the failure, instead of forcing the user to do some sort of reverse mapping to figure out which file is affected. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
No need to pass the full bio_vec. Signed-off-by:
-
Christoph Hellwig authored
Move the initialization of ia and ib to the declaration line and remove a superflous else. Signed-off-by:
-
Christoph Hellwig authored
Now that all the writepage code is in the iomap code there is no need to keep this structure public. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
And inline mapping should never mark the page dirty and thus never end up in writepages. Add a check for that condition and warn if it happens. Signed-off-by:
-
Christoph Hellwig authored
Take the xfs writeback code and move it to fs/iomap. A new structure with three methods is added as the abstraction from the generic writeback code to the file system. These methods are used to map blocks, submit an ioend, and cancel a page that encountered an error before it was added to an ioend. Signed-off-by:
-
Christoph Hellwig authored
Lift the xfs code for tracing address space operations to the iomap layer. Signed-off-by:
-
Christoph Hellwig authored
File systems like gfs2 don't support delayed allocations or unwritten extents and thus allocate normal mapped blocks to fill holes. To cover the case of such file systems allocating new blocks to fill holes also zero out mapped blocks with the new flag. Signed-off-by:
-
Christoph Hellwig authored
In preparation for moving the writeback code to iomap.c, replace the XFS-specific COW fork concept with the iomap IOMAP_F_SHARED flag. Signed-off-by:
-
Christoph Hellwig authored
In preparation for moving the ioend structure to common code we need to get rid of the xfs-specific xfs_trans type. Just make it a file system private void pointer instead. Signed-off-by:
-
Christoph Hellwig authored
Introduce two nicely abstracted helper, which can be moved to the iomap code later. Also use list_first_entry_or_null to simplify the code a bit. Signed-off-by:
-
Christoph Hellwig authored
In preparation for moving the XFS writeback code to fs/iomap.c, switch it to use struct iomap instead of the XFS-specific struct xfs_bmbt_irec. Signed-off-by:
-
Christoph Hellwig authored
Don't set IOMAP_F_NEW if we COW over an existing allocated range, as these aren't strictly new allocations. This is required to be able to use IOMAP_F_NEW to zero newly allocated blocks, which is required for the iomap code to fully support file systems that don't do delayed allocations or use unwritten extents. Signed-off-by:
-
Christoph Hellwig authored
Currently we don't overwrite the flags field in the iomap in xfs_bmbt_to_iomap. This works fine with 0-initialized iomaps on stack, but is harmful once we want to be able to reuse an iomap in the writeback code. Replace the shared parameter with a set of initial flags an thus ensures the flags field is always reinitialized. Signed-off-by:
-
Thomas Gleixner authored
On PREEMPT_RT bit-spinlocks have the same semantics as on PREEMPT_RT=n, i.e. they disable preemption. That means functions which are not safe to be called in preempt disabled context on RT trigger a might_sleep() assert. The journal head bit spinlock is mostly held for short code sequences with trivial RT safe functionality, except for one place: jbd2_journal_put_journal_head() invokes __journal_remove_journal_head() with the journal head bit spinlock held. __journal_remove_journal_head() invokes kmem_cache_free() which must not be called with preemption disabled on RT. Jan suggested to rework the removal function so the actual free happens outside the bit-spinlocked region. Split it into two parts: - Do the sanity checks and the buffer head detach under the lock - Do the actual free after dropping the lock There is error case handling in the free part which needs to dereference the b_size field of the now detached buffer head. Due to paranoia (caused by ignorance) the size is retrieved in the detach function and handed into the free function. Might be over-engineered, but better safe than sorry. This makes the journal head bit-spinlock usage RT compliant and also avoids nested locking which is not covered by lockdep. Suggested-by:
Jan Kara <jack@suse.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: linux-ext4@vger.kernel.org Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jan Kara <jack@suse.com> Signed-off-by:
-
Thomas Gleixner authored
Bit-spinlocks are problematic on PREEMPT_RT if functions which might sleep on RT, e.g. spin_lock(), alloc/free(), are invoked inside the lock held region because bit spinlocks disable preemption even on RT. A first attempt was to replace state lock with a spinlock placed in struct buffer_head and make the locking conditional on PREEMPT_RT and DEBUG_BIT_SPINLOCKS. Jan pointed out that there is a 4 byte hole in struct journal_head where a regular spinlock fits in and he would not object to convert the state lock to a spinlock unconditionally. Aside of solving the RT problem, this also gains lockdep coverage for the journal head state lock (bit-spinlocks are not covered by lockdep as it's hard to fit a lockdep map into a single bit). The trivial change would have been to convert the jbd_*lock_bh_state() inlines, but that comes with the downside that these functions take a buffer head pointer which needs to be converted to a journal head pointer which adds another level of indirection. As almost all functions which use this lock have a journal head pointer readily available, it makes more sense to remove the lock helper inlines and write out spin_*lock() at all call sites. Fixup all locking comments as well. Suggested-by:
-
Jan Kara authored
jbd2_journal_forget() jumps to 'not_jbd' branch which calls __bforget() in cases where the buffer is clean which is pointless. In case of failed assertion, it can be even argued that it is safer not to touch buffer's dirty bits. Also logically it makes more sense to just jump to 'drop' and that will make logic also simpler when we switch bh_state_lock to a spinlock. Signed-off-by:
-
Jan Kara authored
We have cleared both dirty & jbddirty bits from the bh. So there's no difference between bforget() and brelse(). Thus there's no point jumping to no_jbd branch. Signed-off-by:
-
Jan Kara authored
__jbd2_journal_unfile_buffer() and __jbd2_journal_refile_buffer() drop transaction's jh reference when they remove jh from a transaction. This will be however inconvenient once we move state lock into journal_head itself as we still need to unlock it and we'd need to grab jh reference just for that. Move dropping of jh reference out of these functions into the few callers. Signed-off-by:
-
