- 07 Nov, 2019 27 commits
-
-
Colin Ian King authored
Currently a multiply operation is being performed on two int values and the result is being assigned to a u64, presumably because the end result is expected to be probably larger than an int. However, because the multiply is an int multiply one can get overflow. Avoid the overflow by casting degc to a u64 to force a u64 multiply. Also use div_u64 for the divide as suggested by Daniel Lezcano. Addresses-Coverity: ("Unintentional integer overflow") Fixes: fbfe1a042cfd ("drivers: thermal: tsens: Add interrupt support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20191101100035.25502-1-colin.king@canonical.com
-
Daniel Lezcano authored
As the conditions are simplified and unified, it is useless to have different blocks of definitions under the same compiler condition, let's merge the blocks. There is no functional change. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20191030091038.678-2-daniel.lezcano@linaro.org
-
Daniel Lezcano authored
The option CONFIG_CPU_THERMAL depends on CONFIG_OF in the Kconfig. It it pointless to check if CONFIG_OF is set in the header file as this is always true if CONFIG_CPU_THERMAL is true. Remove it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20191030091038.678-1-daniel.lezcano@linaro.org
-
Tian Tao authored
the module_platform_driver will call platform_driver_register. and It will set the .owner to THIS_MODULE Signed-off-by: Tian Tao <tiantao6@huawei.com> Acked-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1572051875-35861-1-git-send-email-tiantao6@huawei.com
-
Colin Ian King authored
Currently the kfree of pointer qfprom_cdata is kfreeing an error value that has been cast to a pointer rather than a valid address. Fix this by removing the kfree. Fixes: 95ededc17e4e ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191022111806.23143-1-colin.king@canonical.com
-
Amit Kucheria authored
Allow qcom-hw driver to initialize right after the cpufreq and thermal subsystems are initialised in core_initcall so we get earlier access to thermal mitigation. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Taniya Das <tdas@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/eacce8d08388b0bdfc908d2701fe7c2b78d90441.1571656015.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
Initialize the clock drivers on sdm845 and qcs404 in core_initcall so we can have earlier access to cpufreq during booting. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/75ae9c3a1c0e69b95818c6ffe7181fdeaaf2d70e.1571656015.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
This allows HW drivers that depend on cpufreq-dt to initialize earlier. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/353c745d4ca1feff600bd44154c01c013f185ca4.1571656015.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
Initialize the cpufreq governors earlier to allow for earlier performance control during the boot process. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/b98eae9b44eb2f034d7f5d12a161f5f831be1eb7.1571656015.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
Now that the thermal framework is built-in, in order to facilitate thermal mitigation as early as possible in the boot cycle, move the thermal framework initialization to core_initcall. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/f8ff0ab4a8e9c2eca5a26fb2256365b26cb326ce.1571656015.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
There are no users of netlink messages for thermal inside the kernel. Remove the code and adjust the documentation. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/8ff02cf62186c7a54fff325fad40a2e9ca3affa6.1571656014.git.amit.kucheria@linaro.org
-
AngeloGioacchino Del Regno authored
Support for MSM8976 and MSM8956 (having tsens ip version 1) has been added to the qcom tsens driver: document the addition here. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191005104133.30297-3-kholk11@gmail.com
-
AngeloGioacchino Del Regno authored
Add support for reading calibrated value from thermistors in MSM8956, MSM8976 and their APQ variants. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191005104133.30297-2-kholk11@gmail.com
-
Guillaume La Roque authored
Add myself as maintainer for Amlogic Thermal driver. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191004090114.30694-8-glaroque@baylibre.com
-
Guillaume La Roque authored
Amlogic G12A and G12B SoCs integrate two thermal sensors with the same design. One is located close to the DDR controller and the other one is located close to the PLLs (between the CPU and GPU). The calibration data for each of the thermal sensors instance is stored in a different location within the AO region. Implement reading the temperature from each thermal sensor. The IP block has more functionality, which may be added to this driver in the future: - chip reset when the temperature exceeds a configurable threshold - up to four interrupts when the temperature has risen above a configurable threshold - up to four interrupts when the temperature has fallen below a configurable threshold Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191004090114.30694-3-glaroque@baylibre.com
-
Guillaume La Roque authored
Adding the devicetree binding documentation for the Amlogic temperature sensor found in the Amlogic Meson G12A and G12B SoCs. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191004090114.30694-2-glaroque@baylibre.com
-
Amit Kucheria authored
Depending on the IP version, TSENS supports upper, lower and critical threshold interrupts. We only add support for upper and lower threshold interrupts for now. TSENSv2 has an irq [status|clear|mask] bit tuple for each sensor while earlier versions only have a single bit per sensor to denote status and clear. These differences are handled transparently by the interrupt handler. At each interrupt, we reprogram the new upper and lower threshold in the .set_trip callback. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/7508ba143f144407e5dd546107ddae65c380a76f.1572526427.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
Hide the details of how to convert values read from TSENS HW to mCelsius behind a function. All versions of the IP can be supported as a result. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/0689917475cf83b7e01f6978504fd37352a5e3ca.1572526427.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
Older IP only supports the 'uplow' interrupt, but newer IP supports 'uplow' and 'critical' interrupts. Document interrupt support in the tsens driver by converting over to a YAML schema. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/d519be4c7198f47c3661f7326d1a724b97dc4973.1572526427.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
Dump some basic version info and sensor details into debugfs. Example from qcs404 below: --(/sys/kernel/debug) $ ls tsens/ 4a9000.thermal-sensor version --(/sys/kernel/debug) $ cat tsens/version 1.4.0 --(/sys/kernel/debug) $ cat tsens/4a9000.thermal-sensor/sensors max: 11 num: 10 id slope offset ------------------------ 0 3200 404000 1 3200 404000 2 3200 404000 3 3200 404000 4 3200 404000 5 3200 404000 6 3200 404000 7 3200 404000 8 3200 404000 9 3200 404000 Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/16e39c1bbfc18b5cf6274620cd72cc63205f53a5.1572526427.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
Printing the function name when enabling debugging makes logs easier to read. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/18717de35f31098d3ebc12564c2767b6d54d37d8.1572526427.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
Move platform_set_drvdata up to avoid an extra 'if (ret)' check after the call to tsens_register. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/184422dcc1c12553e71a58c62e01425fd7d1172a.1572526427.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
There are two fields - id and hw_id - to track what sensor an action was to performed on. This was because the sensors connected to a TSENS IP might not be contiguous i.e. 1, 2, 4, 5 with 3 being skipped. This causes confusion in the code which uses hw_id sometimes and id other times (tsens_get_temp, tsens_get_trend). Switch to only using the hw_id field to track the physical ID of the sensor. When we iterate through all the sensors connected to an IP block, we use an index i to loop through the list of sensors, and then return the actual hw_id that is registered on that index. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/30206cd47d303d2dcaef87f4e3c7173481a0bddd.1572526427.git.amit.kucheria@linaro.org
-
Yuantian Tang authored
Thermal Monitor Unit v2 is introduced on new Layscape SoC. Compared to v1, TMUv2 has a little different register layout and digital output is fairly linear. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191011020534.334-1-andy.tang@nxp.com
-
Hsin-Yi Wang authored
If devm_iio_channel_get() or devm_thermal_zone_of_sensor_register() fail with EPROBE_DEFER, we shouldn't print an error message, as the device will be probed again later. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20190910075907.132200-1-hsinyi@chromium.org
-
Biju Das authored
Document RZ/G2N (R8A774B1) SoC bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1569248589-52372-1-git-send-email-biju.das@bp.renesas.com
-
Biju Das authored
Add r8a774b1 specific compatible string. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1569248746-56718-1-git-send-email-biju.das@bp.renesas.com
-
- 03 Nov, 2019 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "The USB sub-maintainers woke up this past week and sent a bunch of tiny fixes. Here are a lot of small patches that that resolve a bunch of reported issues in the USB core, drivers, serial drivers, gadget drivers, and of course, xhci :) All of these have been in linux-next with no reported issues" * tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits) usb: dwc3: gadget: fix race when disabling ep with cancelled xfers usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host usb: cdns3: gadget: reset EP_CLAIMED flag while unloading USB: serial: whiteheat: fix line-speed endianness USB: serial: whiteheat: fix potential slab corruption USB: gadget: Reject endpoints with 0 maxpacket value UAS: Revert commit 3ae62a42 ("UAS: fix alignment of scatter/gather segments") usb-storage: Revert commit 747668db ("usb-storage: Set virt_boundary_mask to avoid SG overflows") usbip: Fix free of unallocated memory in vhci tx usbip: tools: Fix read_usb_vudc_device() error path handling usb: xhci: fix __le32/__le64 accessors in debugfs code usb: xhci: fix Immediate Data Transfer endianness xhci: Fix use-after-free regression in xhci clear hub TT implementation USB: ldusb: fix control-message timeout USB: ldusb: use unsigned size format specifiers USB: ldusb: fix ring-buffer locking USB: Skip endpoints with 0 maxpacket length usb: cdns3: gadget: Don't manage pullups usb: dwc3: remove the call trace of USBx_GFLADJ usb: gadget: configfs: fix concurrent issue between composite APIs ...
-
- 02 Nov, 2019 10 commits
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fix from Steve French: "A small smb3 memleak fix" * tag '5.4-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6: fix memory leak in large read decrypt offload
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix read timeout problem in ina3221 driver - Fix wrong bitmask in nct7904 driver * tag 'hwmon-for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ina3221) Fix read timeout issue hwmon: (nct7904) Fix the incorrect value of vsen_mask & tcpu_mask & temp_mode in nct7904_data struct.
-
Linus Torvalds authored
Merge tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "It turned out that relying solely on drivers storing all the PWM state in hardware was a little premature and causes a number of subtle (and some not so subtle) regressions. Revert the offending patch for now" * tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: Revert "pwm: Let pwm_get_state() return the last implemented state"
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4] and one core change in sd that fixes an I/O failure on DIF type 3 devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: stop timer in shutdown path scsi: sd: define variable dif as unsigned int instead of bool scsi: target: cxgbit: Fix cxgbit_fw4_ack() scsi: qla2xxx: Fix partial flash write of MBI scsi: qla2xxx: Initialized mailbox to prevent driver load failure scsi: lpfc: Honor module parameter lpfc_use_adisc scsi: ufs-bsg: Wake the device before sending raw upiu commands scsi: lpfc: Check queue pointer before use scsi: qla2xxx: fixup incorrect usage of host_byte
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Our recent cleanup of EEH led to an oops on bare metal machines when the cxl (CAPI) driver creates virtual devices for an attached FPGA accelerator. The "secure virtual machine" support we added in v5.4 had a bug if the kernel was relocated (moved during boot), in those cases the signature of the kernel text wouldn't verify and the Ultravisor would refuse to run the VM. A recent change to disable interrupts before calling arch_cpu_idle_dead() caused a WARN_ON() in our bare metal CPU offline code to always trigger. The KUAP (SMAP) support we added for 32-bit Book3S had a bug if the address range crossed a segment (256MB) boundary which could lead to spurious faults. Thanks to: Christophe Leroy, Frederic Barrat, Michael Anderson, Nicholas Piggin, Sam Bobroff, Thiago Jung Bauermann" * tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Fix CPU idle to be called with IRQs disabled powerpc/prom_init: Undo relocation before entering secure mode powerpc/powernv/eeh: Fix oops when probing cxl devices powerpc/32s: fix allow/prevent_user_access() when crossing segment boundaries.
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Fix cpu idle time accounting - Fix stack unwinder case when both pt_regs and sp are specified - Fix information leak via cmm timeout proc handler * tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/idle: fix cpu idle time calculation s390/unwind: fix mixing regs and sp s390/cmm: fix information leak in cmm_timeout_handler()
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix free/alloc races in batmanadv, from Sven Eckelmann. 2) Several leaks and other fixes in kTLS support of mlx5 driver, from Tariq Toukan. 3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke Høiland-Jørgensen. 4) Add an r8152 device ID, from Kazutoshi Noguchi. 5) Missing include in ipv6's addrconf.c, from Ben Dooks. 6) Use siphash in flow dissector, from Eric Dumazet. Attackers can easily infer the 32-bit secret otherwise etc. 7) Several netdevice nesting depth fixes from Taehee Yoo. 8) Fix several KCSAN reported errors, from Eric Dumazet. For example, when doing lockless skb_queue_empty() checks, and accessing sk_napi_id/sk_incoming_cpu lockless as well. 9) Fix jumbo packet handling in RXRPC, from David Howells. 10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet. 11) Fix DMA synchronization in gve driver, from Yangchun Fu. 12) Several bpf offload fixes, from Jakub Kicinski. 13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo. 14) Fix ping latency during high traffic rates in hisilicon driver, from Jiangfent Xiao. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) net: fix installing orphaned programs net: cls_bpf: fix NULL deref on offload filter removal selftests: bpf: Skip write only files in debugfs selftests: net: reuseport_dualstack: fix uninitalized parameter r8169: fix wrong PHY ID issue with RTL8168dp net: dsa: bcm_sf2: Fix IMP setup for port different than 8 net: phylink: Fix phylink_dbg() macro gve: Fixes DMA synchronization. inet: stop leaking jiffies on the wire ixgbe: Remove duplicate clear_bit() call Documentation: networking: device drivers: Remove stray asterisks e1000: fix memory leaks i40e: Fix receive buffer starvation for AF_XDP igb: Fix constant media auto sense switching when no cable is connected net: ethernet: arc: add the missed clk_disable_unprepare igb: Enable media autosense for the i350. igb/igc: Don't warn on fatal read failures when the device is removed tcp: increase tcp_max_syn_backlog max value net: increase SOMAXCONN to 4096 netdevsim: Fix use-after-free during device dismantle ...
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Anna Schumaker: "This contains two delegation fixes (with the RCU lock leak fix marked for stable), and three patches to fix destroying the the sunrpc back channel. Stable bugfixes: - Fix an RCU lock leak in nfs4_refresh_delegation_stateid() Other fixes: - The TCP back channel mustn't disappear while requests are outstanding - The RDMA back channel mustn't disappear while requests are outstanding - Destroy the back channel when we destroy the host transport - Don't allow a cached open with a revoked delegation" * tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Fix an RCU lock leak in nfs4_refresh_delegation_stateid() NFSv4: Don't allow a cached open with a revoked delegation SUNRPC: Destroy the back channel when we destroy the host transport SUNRPC: The RDMA back channel mustn't disappear while requests are outstanding SUNRPC: The TCP back channel mustn't disappear while requests are outstanding
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Two small nvme fixes, one is a fabrics connection fix, the other one a cleanup made possible by that fix (Anton, via Keith) - Fix requeue handling in umb ubd (Anton) - Fix spin_lock_irq() nesting in blk-iocost (Dan) - Three small io_uring fixes: - Install io_uring fd after done with ctx (me) - Clear ->result before every poll issue (me) - Fix leak of shadow request on error (Pavel) * tag 'for-linus-20191101' of git://git.kernel.dk/linux-block: iocost: don't nest spin_lock_irq in ioc_weight_write() io_uring: ensure we clear io_kiocb->result before each issue um-ubd: Entrust re-queue to the upper layers nvme-multipath: remove unused groups_only mode in ana log nvme-multipath: fix possible io hang after ctrl reconnect io_uring: don't touch ctx in setup after ring fd install io_uring: Fix leaked shadow_req
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "One fix for PCIe users: - Fix legacy PCI I/O port access emulation One set of cleanups: - Resolve most of the warnings generated by sparse across arch/riscv. No functional changes And one MAINTAINERS update: - Update Palmer's E-mail address" * tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: MAINTAINERS: Change to my personal email address RISC-V: Add PCIe I/O BAR memory mapping riscv: for C functions called only from assembly, mark with __visible riscv: fp: add missing __user pointer annotations riscv: add missing header file includes riscv: mark some code and data as file-static riscv: init: merge split string literals in preprocessor directive riscv: add prototypes for assembly language functions from head.S
-
- 01 Nov, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fix from Helge Deller: "Fix a parisc kernel crash with ftrace functions when compiled without frame pointers" * 'parisc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix frame pointer in ftrace_regs_caller()
-