Add RDMA netdev interface to ib device structure allowing RDMA
netdev devices to be allocated by ib clients.

The idea is to allow to providers to optimize IPoIB data path.
New struct that includes functions and data member is exposed.
It exposes set of callback functions for handling data path flows
in IPoIB driver.

Each provider can support these set of functions in order
to optimize its specific data path, and let IPoIB to leverage
its data path.

There is an assumption, that providers should give the full set
of functions and not only part of them, in order to work properly.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

HFI1 VNIC SDMA support enables transmission of VNIC packets over SDMA.
Map VNIC queues to SDMA engines and support halting and wakeup of the
VNIC queues.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

HFI1 HW specific support for VNIC functionality.
Dynamically allocate a set of contexts for VNIC when the first vnic
port is instantiated. Allocate VNIC contexts from user contexts pool
and return them back to the same pool while freeing up. Set aside
enough MSI-X interrupts for VNIC contexts and assign them when the
contexts are allocated. On the receive side, use an RSM rule to
spread TCP/UDP streams among VNIC contexts.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Add support to create and free OPA_VNIC rdma netdev devices.
Implement netstack interface functionality including xmit_skb,
receive side NAPI etc. Also implement rdma netdev control functions.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

OPA VEMA function interfaces with the Infiniband MAD stack to exchange the
management information packets with the Ethernet Manager (EM).
It interfaces with the OPA VNIC netdev function to SET/GET the management
information. The information exchanged with the EM includes class port
details, encapsulation configuration, various counters, unicast and
multicast MAC list and the MAC table. It also supports sending traps
to the EM.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

OPA VNIC EMA interface functions are the management interfaces to the OPA
VNIC netdev. Add support to add and remove VNIC ports. Implement the
required GET/SET management interface functions and processing of new
management information. Add support to send trap notifications upon various
events like interface status change, unicast/multicast mac list update and
mac address change.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

OPA VNIC MAC table contains the MAC address to DLID mappings provided by
the Ethernet manager. During transmission, the MAC table provides the MAC
address to DLID translation. Implement MAC table using simple hash list.
Also provide support to update/query the MAC table by Ethernet manager.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

OPA VNIC driver statistics support maintains various counters including
standard netdev counters and the Ethernet manager defined counters.
Add the Ethtool hook to read the counters.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Define VNIC EM MAD structures and the associated macros. These structures
are used for information exchange between VNIC EM agent (EMA) on the host
and the Ethernet manager. These include the virtual ethernet switch (vesw)
port information, vesw port mac table, summay and error counters,
vesw port interface mac lists and the EMA trap.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

OPA VNIC netdev function supports Ethernet functionality over Omni-Path
fabric by encapsulating Ethernet packets inside Omni-Path packet header.
It allocates a rdma netdev device and interfaces with the network stack to
provide standard Ethernet network interfaces. It overrides HFI1 device's
netdev operations where it is required.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Define OPA VNIC interface between hardware independent VNIC
functionality and the hardware dependent VNIC functionality.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Add rdma netdev interface to ib device structure allowing rdma netdev
devices to be allocated by ib clients.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Add OPA VNIC design document explaining the VNIC architecture and the
driver design.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Previously, ib_uverbs_event_file was suffixed by _file as it contained
the actual file information. Since it's now only used as base struct
for ib_uverbs_async_event_file and ib_uverbs_completion_event_file,
we change its name to ib_uverbs_event_queue. This represents its
logical role better.

Fixes: 1e7710f3 ('IB/core: Change completion channel to use the reworked objects schema')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Previously, we inferred the events size in ib_uverbs_event_read by
using the is_async flag. Instead of that, we pass the event size
directly.

Fixes: 1e7710f3 ('IB/core: Change completion channel to use the reworked objects schema')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Instead of having uverbs_uobject_put both in the error flow and the
good flow, we unite them.

Fixes: fd3c7904 ('IB/core: Change idr objects to use the new schema')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Currently, we initialize all fields of ib_uobject straight after
allocation. Therefore, a kmalloc was sufficient. Since ib_uobject
could be embedded in a type specific structure, we nullify it to
spare programmer errors.

Fixes: 38321256 ('IB/core: Add support for idr types')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The only scenario where this function was called while the lock is
already taken is in the context cleanup scenario. Thus, in order not
to pass the lock state to this function, we just call the remove logic
straight from the cleanup context function.

Fixes: 38321256 ('IB/core: Add support for idr types')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

We rename the "write" flags to "exclusive", as it's used for both
WRITE and DESTROY actions.

Fixes: 38321256 ('IB/core: Add support for idr types')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Saeed Mahameed says:

====================
Mellanox, mlx5 RDMA net device support

This series provides the lower level mlx5 support of RDMA netdevice
creation API [1] suggested and introduced by Intel's HFI OPA VNIC
netdevice driver [2], to enable IPoIB mlx5 RDMA netdevice creation.

mlx5 IPoIB RDMA netdev will serve as an acceleration netdevice for the current
IPoIB ULP generic netdevice, providing:
	- mlx5 RSS support.
	- mlx5 HW RX,TX offloads (checksum, TSO, LRO, etc ..).
	- Full mlx5 HW features transparent to the ULP itself.

The idea here is to reuse and benefit from the already implemented mlx5e netdevice
management and channels API for both etherent and RDMA netdevices, since both IPoIB
and Ethernet netdevices share same common mlx5 HW resources (with some small
exceptions) and share most of the control/data path logic, it is more natural to
have them share the same code.

The differences between IPoIB and Ethernet netdevices can be summarized to:

Steering:
In mlx5, IPoIB traffic is sent and received from an underlay special QP, and in Ethernet
the traffic is handled by vports and vport steering is managed by e-switch or FW.

For IPoIB traffic to get steered correctly the only thing we need to do is to create RSS
HW contexts for RX and TX HW contexts for TX (similar to mlx5e) with the underlay QP attached to
them (underlay QP will be 0 in case of Ethernet).

RX,TX:
Since IPoIB traffic is different, slightly modified RX and TX handlers are required,
still we do some code reuse in data path via common helper functions.

All of the other generic netdevice and mlx5 aspects will be shared between mlx5 Ethernet
and IPoIB netdevices, e.g.
	- Channels creation and handling (RQs,SQs,CQs, NAPI, interrupt moderation, etc..)
	- Offloads, checksum, GRO, LRO, TSO, and more.
        - netdevice logic and non Ethernet specific ndos (open/close, etc..)

In order to achieve what we want:

In patchet 1 to 3, Erez added the supported for underlay QP in mlx5_ifc and refactored
the mlx5 steering code to accept the underlay QP as a parameter for creating steering
objects and enabled flow steering for IB link.

Then we are going to use the mlx5e netdevice profile, which is already used to separate between
NIC and VF representors netdevices, to create new type of IPoIB netdevice profile.

For that, one small refactoring is required to make mlx5e netdevice profile management
more genetic and agnostic to link type which is done in patch #4.

In patch #5, we introduce ipoib.c to host all of mlx5 IPoIB (mlx5i) specific logic and a
skeleton for the IPoIB mlx5 netdevice profile, and we will start filling it in next patches,
using mlx5e already existing APIs.

Patch #6 and #7, Implement init/cleanup RX mlx5i netdev profile handlers to create mlx5 RSS
resources, same as mlx5e but without vlan and L2 steering tables.

Patch #8, Implement init/cleanup TX mlx5i netdev profile handlers, to create TX resources
same as mlx5e but with one TC (tc = 0) support.

Patch #9, Implement mlx5i open/close ndos, where we reuese the mlx5e channels API, to start/stop TX/RX channels.

Patch #10, Create the underlay QP and attach it to mlx5i RSS and TX HW contexts.

Patch #11 and #12, Break down the mlx5e xmit flow into smaller helper function and implement the
mlx5i IPoIB xmit routine.

Patch #13 and #14, Have an RX handler per netdevice profile. We already do this before this series
in a non clean way to separate between NIC netdev and VF representor RX handlers, in patch 13 we make
the RX handler generic and bound to a profile and in patch 14 we implement the IPoIB RX handlers.

Patch #15, Small cleanup to avoid e-switch with IPoIB netdev.

In order to enable mlx5 IPoIB, a merge between the IPoIB RDMA netdev offolad support [3]
- which was alread submitted to the rdma mailing list - and this series is required
plus an extra small patch [4] which will connect between both sides and actually enables the offload.

Once both patch-sets are merged into linux we will have to submit the extra small patch [4], to enable
the feature.

Thanks,
Saeed.

[1] https://patchwork.kernel.org/patch/9676637/

[2] https://lwn.net/Articles/715453/
    https://patchwork.kernel.org/patch/9587815/

[3] https://patchwork.kernel.org/patch/9672069/
[4] https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git/commit/?id=0141db6a686e32294dee015b7d07706162ba48d8
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add check for bit IB_QP_CREATE_NETIF_QP while creating QP.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the driver support only ethernet eswitch, and we want to
protect downstream IPoIB netdev from trying to access it in IB link.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement IPoIB RX SKB handler.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to have different RX handler per profile, fix and refactor the
current code to take the rx handler directly from the netdevice profile
rather than computing it on runtime as it was done with the switchdev
mode representor rx handler.

This will also remove the current wrong assumption in mlx5e_alloc_rq
code that mlx5e_priv->ppriv is of the type vport_rep.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement mlx5e's IPoIB SKB transmit using the helper functions provided
by mlx5e ethernet tx flow, the only difference in the code between
mlx5e_xmit and mlx5i_xmit is that IPoIB has some extra fields to fill
(UD datagram segment) in the TX descriptor (WQE) and it doesn't need to
have any vlan handling.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Break current mlx5e xmit flow into smaller blocks (helper functions)
in order to reuse them for IPoIB SKB transmission.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create IPoIB underlay QP needed by the IPoIB netdevice profile for RSS
and TX HW context to perform on IPoIB traffic.

Reset the underlay QP on dev_uninit ndo to stop IPoIB traffic going
through this QP when the ULP IPoIB decides to cleanup.

Implement attach/detach mcast RDMA netdev callbacks for later RDMA
netdev use.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement open/close of IPoIB netdevice ndos using mlx5e's
channels API to manage data path resources (RQs/SQs/CQs).

Set IPoIB netdev address on dev_init ndo.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify mlx5e tis creation function to accept underlay qp number, which
will be needed by IPoIB.

Implement mlx5i (IPoIB) tx init/cleanup netdevice profile flows to
create one TIS with the IPoIB underlay qp, for IPoIB TX SQs.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Like the mlx5e ethernet mode, on IPoIB mode we need to create RX steering
tables, but IPoIB do not require MAC and VLAN steering tables so the
only tables we create in here are:
1. TTC Table (Traffic Type Classifier table for RSS steering)
2. ARFS Table (for accelerated RFS support)

Creation of those tables is identical to mlx5e ethernet mode, hence the
use of mlx5e_create_ttc_table and mlx5e_arfs_create_tables.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement IPoIB RX RSS (RQTs and TIRs) HW objects creation,
All we do here is simply reuse the mlx5e implementation to create
direct and indirect (RSS) steering HW objects.

For that we just expose
mlx5e_{create,destroy}_{direct,indirect}_{rqt,tir} functions into en.h
and call them from ipoib.c in init/cleanup_rx IPoIB netdevice profile
callbacks.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create mlx5e IPoIB netdevice profile skeleton in the new ipoib.c
file with empty implementation.

Downstream patches will provide the full mlx5 rdma netdevice acceleration
support for IPoIB into this new file, by using the mlx5e netdevice
profile and new mlx5_channels APIs and infrastructures.
Same as already done in mlx5e NIC netdevice and switchdev mode VF
representors.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for mlx5e RDMA net_device support, here we generalize
mlx5e_attach/detach in a way that those functions will be agnostic
to link type.  For that we move ethernet specific NIC net device logic out
of those functions into {nic,rep}_{enable/disable} mlx5e NIC and
representor profiles callbacks.

Also some of the logic was moved only to NIC profile since it is not right
to have this logic for representor net device (e.g. set port MTU).
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Get the relevant capabilities if supports ipoib_enhanced_offloads and
init the flow steering table accordingly.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IB flow tables need the underlay qp to perform flow steering.
Here we change the API of the flow tables creation to accept the
underlay QP number as a parameter in order to support IB (IPoIB) flow
steering.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

New capability bit: ipoib_enhanced_offloads, indicates new ability for UD
QP to do RSS and enhanced IPoIB offloads and acceleration.

Add underlay_qpn to the TIS and flow_table objects In order to support
SET_ROOT command, to connect between IPoIB QPs and flow steering tables.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Azure hosts are not supporting non-TCP port numbers in vRSS hashing for
now. For example, UDP packet loss rate will be high if port numbers are
also included in vRSS hash.

So, we created this patch to use only IP numbers for hashing in non-TCP
traffic.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the outgoing skb has a RX queue mapping available, we use the queue
number directly, other than put it through Send Indirection Table.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch moves as is the legacy DSA code from dsa.c to legacy.c,
except the few shared symbols which remain in dsa.c.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>