- 09 May, 2018 19 commits
-
-
SZ Lin (林上智) authored
commit 9306b38e upstream. This patch adds support for PID 0x90b2 of ublox R410M. qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer [/dev/cdc-wdm0] Device manufacturer retrieved: Manufacturer: 'u-blox' qmicli -d /dev/cdc-wdm0 --dms-get-model [/dev/cdc-wdm0] Device model retrieved: Model: 'SARA-R410M-02B' Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leon Romanovsky authored
commit 002bf228 upstream. Ensure that user didn't supply values too large that can cause overflow. UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23 shift exponent -2147483648 is negative CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ubsan_epilogue+0xe/0x81 set_rq_size+0x7c2/0xa90 create_qp_common+0xc18/0x43c0 mlx5_ib_create_qp+0x379/0x1ca0 create_qp.isra.5+0xc94/0x2260 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0xc2c/0x1010 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 do_syscall_64+0x1aa/0x740 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x433569 RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569 RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003 RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8 R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000 R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006 Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller@googlegroups.com> Reported-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Roland Dreier authored
commit 09abfe7b upstream. The RDMA CM will select a source device and address by consulting the routing table if no source address is passed into rdma_resolve_address(). Userspace will ask for this by passing an all-zero source address in the RESOLVE_IP command. Unfortunately the new check for non-zero address size rejects this with EINVAL, which breaks valid userspace applications. Fix this by explicitly allowing a zero address family for the source. Fixes: 2975d5de ("RDMA/ucma: Check AF family prior resolving address") Cc: <stable@vger.kernel.org> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Raju Rangoju authored
commit 26bff1bd upstream. The c4iw_rdev_close() logic was not releasing all the hw resources (PBL and RQT memory) during the device removal event (driver unload / system reboot). This can cause panic in gen_pool_destroy(). The module remove function will wait for all the hw resources to be released during the device removal event. Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref) Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Darrick J. Wong authored
commit 7d83fb14 upstream. During the "insert range" fallocate operation, i_size grows by the specified 'len' bytes. XFS verifies that i_size + len < s_maxbytes, as it should. But this comparison is done using the signed 'loff_t', and 'i_size + len' can wrap around to a negative value, causing the check to incorrectly pass, resulting in an inode with "negative" i_size. This is possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX. ext4 and f2fs don't run into this because they set a smaller s_maxbytes. Fix it by using subtraction instead. Reproducer: xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096" Fixes: a904b1ca ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: <stable@vger.kernel.org> # v4.1+ Originally-From: Eric Biggers <ebiggers@google.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix signed integer addition overflow too] Signed-off-by:
-
Vittorio Gambaletta (VittGam) authored
commit f372b811 upstream. This patch adds the correct platform data information for the Caroline Chromebook, so that the mouse button does not get stuck in pressed state after the first click. The Samus button keymap and platform data definition are the correct ones for Caroline, so they have been reused here. Signed-off-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by:
Salvatore Bellizzi <lkml@seppia.net> Tested-by:
Guenter Roeck <groeck@chromium.org> Cc: stable@vger.kernel.org [dtor: adjusted vendor spelling to match shipping firmware] Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 6bd6ae63 upstream. UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with led > LED_CHARGING: [ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds] [ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128 This happens because we were writing to the led structure before making sure that it exists. Reported-by:
Tasos Sahanidis <tasos@tasossah.com> Tested-by:
-
Mathieu Desnoyers authored
commit d66a270b upstream. Tracepoint should only warn when a kernel API user does not respect the required preconditions (e.g. same tracepoint enabled twice, or called to remove a tracepoint that does not exist). Silence warning in out-of-memory conditions, given that the error is returned to the caller. This ensures that out-of-memory error-injection testing does not trigger warnings in tracepoint.c, which were seen by syzbot. Link: https://lkml.kernel.org/r/001a114465e241a8720567419a72@google.com Link: https://lkml.kernel.org/r/001a1140e0de15fc910567464190@google.com Link: http://lkml.kernel.org/r/20180315124424.32319-1-mathieu.desnoyers@efficios.com CC: Peter Zijlstra <peterz@infradead.org> CC: Jiri Olsa <jolsa@redhat.com> CC: Arnaldo Carvalho de Melo <acme@kernel.org> CC: Alexander Shishkin <alexander.shishkin@linux.intel.com> CC: Namhyung Kim <namhyung@kernel.org> CC: stable@vger.kernel.org Fixes: de7b2973 ("tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints") Reported-by: syzbot+9c0d616860575a73166a@syzkaller.appspotmail.com Reported-by: syzbot+4e9ae7fa46233396f64d@syzkaller.appspotmail.com Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Takashi Iwai authored
commit 76b3421b upstream. Some control API callbacks in aloop driver are too lazy to take the loopback->cable_lock and it results in possible races of cable access while it's being freed. It eventually lead to a UAF, as reported by fuzzer recently. This patch covers such control API callbacks and add the proper mutex locks. Reported-by:
DaeRyong Jeong <threeearcat@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Robert Rosengren authored
commit 306a4f3c upstream. Show paused ALSA aloop device as inactive, i.e. the control "PCM Slave Active" set as false. Notification sent upon state change. This makes it possible for client capturing from aloop device to know if data is expected. Without it the client expects data even if playback is paused. Signed-off-by:
Robert Rosengren <robert.rosengren@axis.com> Signed-off-by:
-
Takashi Iwai authored
commit 8f22e525 upstream. The sequencer virmidi code has an open race at its output trigger callback: namely, virmidi keeps only one event packet for processing while it doesn't protect for concurrent output trigger calls. snd_virmidi_output_trigger() tries to process the previously unfinished event before starting encoding the given MIDI stream, but this is done without any lock. Meanwhile, if another rawmidi stream starts the output trigger, this proceeds further, and overwrites the event package that is being processed in another thread. This eventually corrupts and may lead to the invalid memory access if the event type is like SYSEX. The fix is just to move the spinlock to cover both the pending event and the new stream. The bug was spotted by a new fuzzer, RaceFuzzer. BugLink: http://lkml.kernel.org/r/20180426045223.GA15307@dragonet.kaist.ac.krReported-by:
-
Takashi Iwai authored
commit f13876e2 upstream. Since snd_pcm_ioctl_xfern_compat() has no PCM state check, it may go further and hit the sanity check pcm_sanity_check() when the ioctl is called right after open. It may eventually spew a kernel warning, as triggered by syzbot, depending on kconfig. The lack of PCM state check there was just an oversight. Although it's no real crash, the spurious kernel warning is annoying, so let's add the proper check. Reported-by: syzbot+1dac3a4f6bc9c1c675d4@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kristian Evensen authored
commit 71a0483d upstream. The Quectel EP06 is a Cat. 6 LTE modem, and the interface mapping is as follows: 0: Diag 1: NMEA 2: AT 3: Modem Interface 4 is QMI and interface 5 is ADB, so they are blacklisted. This patch should also be considered for -stable. The QMI-patch for this modem is already in the -stable-queue. v1->v2: * Updated commit prefix (thanks Johan Hovold) * Updated commit message slightly. Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Acked-by:
Johan Hovold <johan@kernel.org> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Uwe Kleine-König authored
commit 6df765dc upstream. Commit e61c38d8 ("serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off") has a flaw: While UCR3 and UFCR were modified using read-modify-write before it switched to write register values independent of the previous state. That's a good idea in principle (and that's why I did it) but needs more care. This patch reinstates read-modify-write for UFCR and for UCR3 ensures that RXDMUXSEL and ADNIMP are set for post imx1. Fixes: e61c38d8 ("serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Mika Penttilä <mika.penttila@nextfour.com> Tested-by:
Steve Twiss <stwiss.opensource@diasemi.com> Tested-by:
-
LEROY Christophe authored
commit 2b122730 upstream. For SEC 2.x+, cipher in length must contain only the ciphertext length. In case of using hardware ICV checking, the ICV length is provided via the "extent" field of the descriptor pointer. Cc: <stable@vger.kernel.org> # 4.8+ Fixes: 549bd8bc ("crypto: talitos - Implement AEAD for SEC1 using HMAC_SNOOP_NO_AFEU") Reported-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Tested-by:
Herbert Xu <herbert@gondor.apana.org.au> [backported to 4.9.y, 4.14.y] Signed-off-by:
-
Marc Zyngier authored
commit 85bd0ba1 upstream. Although we've implemented PSCI 0.1, 0.2 and 1.0, we expose either 0.1 or 1.0 to a guest, defaulting to the latest version of the PSCI implementation that is compatible with the requested version. This is no different from doing a firmware upgrade on KVM. But in order to give a chance to hypothetical badly implemented guests that would have a fit by discovering something other than PSCI 0.2, let's provide a new API that allows userspace to pick one particular version of the API. This is implemented as a new class of "firmware" registers, where we expose the PSCI version. This allows the PSCI version to be save/restored as part of a guest migration, and also set to any supported version if the guest requires it. Cc: stable@vger.kernel.org #4.16 Reviewed-by:
Christoffer Dall <cdall@kernel.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Teng Qin authored
commit 8fe45924 upstream. When iterating through a map, we need to find a key that does not exist in the map so map_get_next_key will give us the first key of the map. This often requires a lot of guessing in production systems. This patch makes map_get_next_key return the first key when the key pointer in the parameter is NULL. Signed-off-by:
Teng Qin <qinteng@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Chenbo Feng <fengc@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Tejun Heo authored
commit 71546d10 upstream. microblaze build broke due to missing declaration of the cond_resched() invocation added recently. Let's include linux/sched.h explicitly. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Tan Xiaojun authored
commit 1572e45a upstream. Use "proc_dointvec_minmax" instead of "proc_dointvec" to check the input value from user-space. If not, we can set a big value and some vars will overflow like "sysctl_perf_event_sample_rate" which will cause a lot of unexpected problems. Signed-off-by:
Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <acme@kernel.org> Cc: <alexander.shishkin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1487829879-56237-1-git-send-email-tanxiaojun@huawei.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 01 May, 2018 21 commits
-
-
Greg Kroah-Hartman authored
-
Michael Neuling authored
commit f0295e04 upstream. The current EEH callbacks can race with a driver unbind. This can result in a backtraces like this: EEH: Frozen PHB#0-PE#1fc detected EEH: PE location: S000009, PHB location: N/A CPU: 2 PID: 2312 Comm: kworker/u258:3 Not tainted 4.15.6-openpower1 #2 Workqueue: nvme-wq nvme_reset_work [nvme] Call Trace: dump_stack+0x9c/0xd0 (unreliable) eeh_dev_check_failure+0x420/0x470 eeh_check_failure+0xa0/0xa4 nvme_reset_work+0x138/0x1414 [nvme] process_one_work+0x1ec/0x328 worker_thread+0x2e4/0x3a8 kthread+0x14c/0x154 ret_from_kernel_thread+0x5c/0xc8 nvme nvme1: Removing after probe failure status: -19 <snip> cpu 0x23: Vector: 300 (Data Access) at [c000000ff50f3800] pc: c0080000089a0eb0: nvme_error_detected+0x4c/0x90 [nvme] lr: c000000000026564: eeh_report_error+0xe0/0x110 sp: c000000ff50f3a80 msr: 9000000000009033 dar: 400 dsisr: 40000000 current = 0xc000000ff507c000 paca = 0xc00000000fdc9d80 softe: 0 irq_happened: 0x01 pid = 782, comm = eehd Linux version 4.15.6-openpower1 (smc@smc-desktop) (gcc version 6.4.0 (Buildroot 2017.11.2-00008-g4b6188e)) #2 SM P Tue Feb 27 12:33:27 PST 2018 enter ? for help eeh_report_error+0xe0/0x110 eeh_pe_dev_traverse+0xc0/0xdc eeh_handle_normal_event+0x184/0x4c4 eeh_handle_event+0x30/0x288 eeh_event_handler+0x124/0x170 kthread+0x14c/0x154 ret_from_kernel_thread+0x5c/0xc8 The first part is an EEH (on boot), the second half is the resulting crash. nvme probe starts the nvme_reset_work() worker thread. This worker thread starts touching the device which see a device error (EEH) and hence queues up an event in the powerpc EEH worker thread. nvme_reset_work() then continues and runs nvme_remove_dead_ctrl_work() which results in unbinding the driver from the device and hence releases all resources. At the same time, the EEH worker thread starts doing the EEH .error_detected() driver callback, which no longer works since the resources have been freed. This fixes the problem in the same way the generic PCIe AER code (in drivers/pci/pcie/aer/aerdrv_core.c) does. It makes the EEH code hold the device_lock() while performing the driver EEH callbacks and associated code. This ensures either the callbacks are no longer register, or if they are registered the driver will not be removed from underneath us. This has been broken forever. The EEH call backs were first introduced in 2005 (in 77bd7415) but it's not clear if a lock was needed back then. Fixes: 77bd7415 ("[PATCH] powerpc: PCI Error Recovery: PPC64 core recovery routines") Cc: stable@vger.kernel.org # v2.6.16+ Signed-off-by:
Michael Neuling <mikey@neuling.org> Reviewed-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Borislav Petkov authored
commit 84749d83 upstream. save_mc_for_early() was a no-op on !CONFIG_HOTPLUG_CPU but the generic_load_microcode() path saves the microcode patches it has found into the cache of patches which is used for late loading too. Regardless of whether CPU hotplug is used or not. Make the saving unconditional so that late loading can find the proper patch. Reported-by:
Vitezslav Samel <vitezslav@samel.cz> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180418081140.GA2439@pc11.op.pod.cz Link: https://lkml.kernel.org/r/20180421081930.15741-1-bp@alien8.deSigned-off-by:
-
Yazen Ghannam authored
commit da6fa7ef upstream. Recent AMD systems support using MWAIT for C1 state. However, MWAIT will not allow deeper cstates than C1 on current systems. play_dead() expects to use the deepest state available. The deepest state available on AMD systems is reached through SystemIO or HALT. If MWAIT is available, it is preferred over the other methods, so the CPU never reaches the deepest possible state. Don't try to use MWAIT to play_dead() on AMD systems. Instead, use CPUIDLE to enter the deepest state advertised by firmware. If CPUIDLE is not available then fallback to HALT. Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
-
Arnd Bergmann authored
commit 1a512c08 upstream. A bugfix broke the x32 shmid64_ds and msqid64_ds data structure layout (as seen from user space) a few years ago: Originally, __BITS_PER_LONG was defined as 64 on x32, so we did not have padding after the 64-bit __kernel_time_t fields, After __BITS_PER_LONG got changed to 32, applications would observe extra padding. In other parts of the uapi headers we seem to have a mix of those expecting either 32 or 64 on x32 applications, so we can't easily revert the path that broke these two structures. Instead, this patch decouples x32 from the other architectures and moves it back into arch specific headers, partially reverting the even older commit 73a2d096 ("x86: remove all now-duplicate header files"). It's not clear whether this ever made any difference, since at least glibc carries its own (correct) copy of both of these header files, so possibly no application has ever observed the definitions here. Based on a suggestion from H.J. Lu, I tried out the tool from https://github.com/hjl-tools/linux-header to find other such bugs, which pointed out the same bug in statfs(), which also has a separate (correct) copy in glibc. Fixes: f4b4aae1 ("x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sergey Senozhatsky authored
commit ad343a98 upstream. Use a separate fd set for select()-s exception fds param to fix the following gcc warning: pager.c:36:12: error: passing argument 2 to restrict-qualified parameter aliases with argument 4 [-Werror=restrict] select(1, &in, NULL, &in, NULL); ^~~ ~~~ Link: http://lkml.kernel.org/r/20180101105626.7168-1-sergey.senozhatsky@gmail.comSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Fredrik Schön <fredrikschon@gmail.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 854e55ad upstream. Starting with recent GCC 8 builds, objtool and perf fail to build with the following error: ../str_error_r.c: In function ‘str_error_r’: ../str_error_r.c:25:3: error: passing argument 1 to restrict-qualified parameter aliases with argument 5 [-Werror=restrict] snprintf(buf, buflen, "INTERNAL ERROR: strerror_r(%d, %p, %zd)=%d", errnum, buf, buflen, err); The code seems harmless, but there's probably no benefit in printing the 'buf' pointer in this situation anyway, so just remove it to make GCC happy. Reported-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Fredrik Schön <fredrikschon@gmail.com> Signed-off-by:
-
Nicolai Hähnle authored
commit 75569c18 upstream. Otherwise, the SQ may skip some of the register writes, or shader waves may be allocated where we don't expect them, so that as a result we don't actually reset all of the register SRAMs. This can lead to spurious ECC errors later on if a shader uses an uninitialized register. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Nicholas Piggin authored
commit 682e6b4d upstream. The OPAL RTC driver does not sleep in case it gets OPAL_BUSY or OPAL_BUSY_EVENT from firmware, which causes large scheduling latencies, up to 50 seconds have been observed here when RTC stops responding (BMC reboot can do it). Fix this by converting it to the standard form OPAL_BUSY loop that sleeps. Fixes: 628daa8d ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Shilpasri G Bhat authored
commit c0f7f5b6 upstream. gpstate_timer_handler() uses synchronous smp_call to set the pstate on the requested core. This causes the below hard lockup: smp_call_function_single+0x110/0x180 (unreliable) smp_call_function_any+0x180/0x250 gpstate_timer_handler+0x1e8/0x580 call_timer_fn+0x50/0x1c0 expire_timers+0x138/0x1f0 run_timer_softirq+0x1e8/0x270 __do_softirq+0x158/0x3e4 irq_exit+0xe8/0x120 timer_interrupt+0x9c/0xe0 decrementer_common+0x114/0x120 -- interrupt: 901 at doorbell_global_ipi+0x34/0x50 LR = arch_send_call_function_ipi_mask+0x120/0x130 arch_send_call_function_ipi_mask+0x4c/0x130 smp_call_function_many+0x340/0x450 pmdp_invalidate+0x98/0xe0 change_huge_pmd+0xe0/0x270 change_protection_range+0xb88/0xe40 mprotect_fixup+0x140/0x340 SyS_mprotect+0x1b4/0x350 system_call+0x58/0x6c One way to avoid this is removing the smp-call. We can ensure that the timer always runs on one of the policy-cpus. If the timer gets migrated to a cpu outside the policy then re-queue it back on the policy->cpus. This way we can get rid of the smp-call which was being used to set the pstate on the policy->cpus. Fixes: 7bc54b65 ("timers, cpufreq/powernv: Initialize the gpstate timer as pinned") Cc: stable@vger.kernel.org # v4.8+ Reported-by:
Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by:
Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by:
-
Daniel Kurtz authored
commit dd709e72 upstream. Commit 99492c39 ("earlycon: Fix __earlycon_table stride") tried to fix __earlycon_table stride by forcing the earlycon_id struct alignment to 32 and asking the linker to 32-byte align the __earlycon_table symbol. This fix was based on commit 07fca0e5 ("tracing: Properly align linker defined symbols") which tried a similar fix for the tracing subsystem. However, this fix doesn't quite work because there is no guarantee that gcc will place structures packed into an array format. In fact, gcc 4.9 chooses to 64-byte align these structs by inserting additional padding between the entries because it has no clue that they are supposed to be in an array. If we are unlucky, the linker will assign symbol "__earlycon_table" to a 32-byte aligned address which does not correspond to the 64-byte aligned contents of section "__earlycon_table". To address this same problem, the fix to the tracing system was subsequently re-implemented using a more robust table of pointers approach by commits: 3d56e331 ("tracing: Replace syscall_meta_data struct array with pointer array") 65498646 ("tracepoints: Fix section alignment using pointer array") e4a9ea5e ("tracing: Replace trace_event struct array with pointer array") Let's use this same "array of pointers to structs" approach for EARLYCON_TABLE. Fixes: 99492c39 ("earlycon: Fix __earlycon_table stride") Signed-off-by:
Daniel Kurtz <djkurtz@chromium.org> Suggested-by:
Aaron Durbin <adurbin@chromium.org> Reviewed-by:
Rob Herring <robh@kernel.org> Tested-by:
-
Ilya Dryomov authored
commit 9c55ad1c upstream. ceph_con_workfn() validates con->state before calling try_read() and then try_write(). However, try_read() temporarily releases con->mutex, notably in process_message() and ceph_con_in_msg_alloc(), opening the window for ceph_con_close() to sneak in, close the connection and release con->sock. When try_write() is called on the assumption that con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock gets passed to the networking stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_socket_sendmsg+0x5/0x20 Make sure con->state is valid at the top of try_write() and add an explicit BUG_ON for this, similar to try_read(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/23706Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jason Dillaman <dillaman@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 7b4c443d upstream. If we go without an established session for a while, backoff delay will climb to 30 seconds. The keepalive timeout is also 30 seconds, so it's pretty easily hit after a prolonged hunting for a monitor: we don't get a chance to send out a keepalive in time, which means we never get back a keepalive ack in time, cutting an established session and attempting to connect to a different monitor every 30 seconds: [Sun Apr 1 23:37:05 2018] libceph: mon0 10.80.20.99:6789 session established [Sun Apr 1 23:37:36 2018] libceph: mon0 10.80.20.99:6789 session lost, hunting for new mon [Sun Apr 1 23:37:36 2018] libceph: mon2 10.80.20.103:6789 session established [Sun Apr 1 23:38:07 2018] libceph: mon2 10.80.20.103:6789 session lost, hunting for new mon [Sun Apr 1 23:38:07 2018] libceph: mon1 10.80.20.100:6789 session established [Sun Apr 1 23:38:37 2018] libceph: mon1 10.80.20.100:6789 session lost, hunting for new mon [Sun Apr 1 23:38:37 2018] libceph: mon2 10.80.20.103:6789 session established [Sun Apr 1 23:39:08 2018] libceph: mon2 10.80.20.103:6789 session lost, hunting for new mon The regular keepalive interval is 10 seconds. After ->hunting is cleared in finish_hunting(), call __schedule_delayed() to ensure we send out a keepalive after 10 seconds. Cc: stable@vger.kernel.org # 4.7+ Link: http://tracker.ceph.com/issues/23537Signed-off-by:
-
Ilya Dryomov authored
commit facb9f6e upstream. This means that if we do some backoff, then authenticate, and are healthy for an extended period of time, a subsequent failure won't leave us starting our hunting sequence with a large backoff. Mirrors ceph.git commit d466bc6e66abba9b464b0b69687cf45c9dccf383. Cc: stable@vger.kernel.org # 4.7+ Signed-off-by:
-
Nicolin Chen authored
commit c656941d upstream. When the desired ratio is less than 256, the savesub (tolerance) in the calculation would become 0. This will then fail the loop- search immediately without reporting any errors. But if the ratio is smaller enough, there is no need to calculate the tolerance because PM divisor alone is enough to get the ratio. So a simple fix could be just to set PM directly instead of going into the loop-search. Reported-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Tested-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Stephan Mueller authored
commit eea0d3ea upstream. During freeing of the internal buffers used by the DRBG, set the pointer to NULL. It is possible that the context with the freed buffers is reused. In case of an error during initialization where the pointers do not yet point to allocated memory, the NULL value prevents a double free. Cc: stable@vger.kernel.org Fixes: 3cfc3b97 ("crypto: drbg - use aligned buffers") Signed-off-by:
Stephan Mueller <smueller@chronox.de> Reported-by: syzbot+75397ee3df5c70164154@syzkaller.appspotmail.com Signed-off-by:
-
Geert Uytterhoeven authored
commit d2ffed51 upstream. When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count + 1 bytes for printing. Cfr. commits 4efe874a ("PCI: Don't read past the end of sysfs "driver_override" buffer") and bf563b01 ("driver core: platform: Don't read past the end of "driver_override" buffer"). Fixes: 3cf38571 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit 6a7228d9 upstream. The driver_override implementation is susceptible to a race condition when different threads are reading vs storing a different driver override. Add locking to avoid this race condition. Cfr. commits 62655397 ("driver core: platform: fix race condition with driver_override") and 9561475d ("PCI: Fix race condition with driver_override"). Fixes: 3cf38571 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by:
-
Geert Uytterhoeven authored
commit 5f536246 upstream. For AMBA devices with unconfigured driver override, the "driver_override" sysfs virtual file is empty, while it contains "(null)" for platform and PCI devices. Make AMBA consistent with other buses by dropping the test for a NULL pointer. Note that contrary to popular belief, sprintf() handles NULL pointers fine; they are printed as "(null)". Signed-off-by:
-
Evan Wang authored
commit fc31c4e3 upstream. There is an obvious typo issue in the definition of the PCIe maximum read request size: a bit shift is directly used as a value, while it should be used to shift the correct value. Fixes: 8c39d710 ("PCI: aardvark: Add Aardvark PCI host controller driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Evan Wang <xswang@marvell.com> Reviewed-by:
Victor Gu <xigu@marvell.com> Reviewed-by:
Nadav Haklai <nadavh@marvell.com> [Thomas: tweak commit log.] Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Victor Gu authored
commit 4fa3999e upstream. When setting the PIO_ADDR_LS register during a configuration read, we were properly passing the device number, function number and register number, but not the bus number, causing issues when reading the configuration of PCIe devices. Fixes: 8c39d710 ("PCI: aardvark: Add Aardvark PCI host controller driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Wilson Ding <dingwei@marvell.com> Reviewed-by:
-
