- 28 Jan, 2015 12 commits
-
-
Jack Morgenstein authored
The reserved lKey is different for each VF. A base lkey value is returned in QUERY_DEV_CAP at offset 0x98. The reserved L_key value for a VF is: VF_lkey = base_lkey + (VF_number << 8). This VF L_key value should be returned in QUERY_FUNC_CAP (opcode-modifier = 0) at offset 0x48. To indicate that the lkey value at offset 0x48 is valid, the Hypervisor sets a flag bit in dword 0x0, offset 27 in the QUERY_FUNC_CAP wrapper function. When the VF calls QUERY_FUNC_CAP, it should check if this flag bit is set. If it is set, the VF should take the reserved lkey value at offset 0x48. If the bit is not set, the VF should not use a reserved lkey (i.e., should set its reserved lkey value to 0). Signed-off-by:Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
If the firmware can detect a bad cable, allow it to generate an event, and print the problem in the log. Signed-off-by:
-
Nicolas Dichtel authored
Previous commit is based on a wrong assumption, fdb messages are always sent into the netns where the interface stands (see vxlan_fdb_notify()). These fdb messages doesn't embed the rtnl attribute IFLA_LINK_NETNSID, thus we need to add it (useful to interpret NDA_IFINDEX or NDA_DST for example). Note also that vxlan_nlmsg_size() was not updated. Fixes: 193523bf ("vxlan: advertise netns of vxlan dev in fdb msg") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
David S. Miller authored
Jonathan Toppins says: ==================== bonding: various 802.3ad fixes This patch series is a forward porting of patches we (Cumulus) are shipping in our 3.2 series kernels. These fixes attempt to make 802.3ad bonding mode more predictable in certian state machine transtions in addition to fixing 802.3ad bond carrier determination when bonding min_links option is changed. Specific notes are contained within each patch. For this patch series there are no userspace facing changes, a diff between the modinfo output showed no difference. However, there are behavioral facing changes, primarily in the bond carrier state. Please make sure to review carefully. v2: * fixed some style issues * dropped a portion of patch 1 in favor of more testing on my side ==================== Signed-off-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
-
Jonathan Toppins authored
fix sparse warning about non-static function drivers/net/bonding/bond_main.c:3737:5: warning: symbol 'bond_3ad_xor_xmit' was not declared. Should it be static? Reviewed-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Satish Ashok authored
When a slave is added to a bond and it is not in full duplex mode, AD_PORT_LACP_ENABLED flag is cleared, due to this LACP PDU is not sent on slave. When the duplex is changed to full, the flag needs to be set to send LACP PDU. Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
-
Wilson Kok authored
This patch attempts to fix the following problems when an actor or partner's aggregator is not active: 1. a slave's lacp port state is marked as AD_STATE_SYNCHRONIZATION even if it is attached to an inactive aggregator. LACP advertises this state to the partner, making the partner think he can move into COLLECTING_DISTRIBUTING state even though this link will not pass traffic on the local side 2. a slave goes into COLLECTING_DISTRIBUTING state without checking if the aggregator is actually active 3. when in COLLECTING_DISTRIBUTING state, the partner parameters may change, e.g. the partner_oper_port_state.SYNCHRONIZATION. The local mux machine is not reacting to the change and continue to keep the slave and bond up 4. When bond slave leaves an inactive aggregator and joins an active aggregator, the actor oper port state need to update to SYNC state. v2: * fix style issues in bond_3ad.c Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by:Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by:
-
Wilson Kok authored
Mode 802.3ad, fix incorrect bond slave active state when slave is not in active aggregator. During bond_open(), the bonding driver always sets the slave active flag to true if the bond is not in active-backup, alb, or tlb modes. Bonding should let the aggregator selection logic set the active flag when in 802.3ad mode. Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by:
-
Jonathan Toppins authored
Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
-
Nicholas Mc Guire authored
return type of wait_for_completion_timeout is unsigned long not int, this patch just fixes up the declarations. Signed-off-by:
Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by:
-
Nicholas Mc Guire authored
Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by:
-
- 27 Jan, 2015 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't OOPS on socket AIO, from Christoph Hellwig. 2) Scheduled scans should be aborted upon RFKILL, from Emmanuel Grumbach. 3) Fix sleep in atomic context in kvaser_usb, from Ahmed S Darwish. 4) Fix RCU locking across copy_to_user() in bpf code, from Alexei Starovoitov. 5) Lots of crash, memory leak, short TX packet et al bug fixes in sh_eth from Ben Hutchings. 6) Fix memory corruption in SCTP wrt. INIT collitions, from Daniel Borkmann. 7) Fix return value logic for poll handlers in netxen, enic, and bnx2x. From Eric Dumazet and Govindarajulu Varadarajan. 8) Header length calculation fix in mac80211 from Fred Chou. 9) mv643xx_eth doesn't handle highmem correctly in non-TSO code paths. From Ezequiel Garcia. 10) udp_diag has bogus logic in it's hash chain skipping, copy same fix tcp diag used. From Herbert Xu. 11) amd-xgbe programs wrong rx flow control register, from Thomas Lendacky. 12) Fix race leading to use after free in ping receive path, from Subash Abhinov Kasiviswanathan. 13) Cache redirect routes otherwise we can get a heavy backlog of rcu jobs liberating DST_NOCACHE entries. From Hannes Frederic Sowa. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits) net: don't OOPS on socket aio stmmac: prevent probe drivers to crash kernel bnx2x: fix napi poll return value for repoll ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too sh_eth: Fix DMA-API usage for RX buffers sh_eth: Check for DMA mapping errors on transmit sh_eth: Ensure DMA engines are stopped before freeing buffers sh_eth: Remove RX overflow log messages ping: Fix race in free in receive path udp_diag: Fix socket skipping within chain can: kvaser_usb: Fix state handling upon BUS_ERROR events can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT can: kvaser_usb: Send correct context to URB completion can: kvaser_usb: Do not sleep in atomic context ipv4: try to cache dst_entries which would cause a redirect samples: bpf: relax test_maps check bpf: rcu lock must not be held when calling copy_to_user() net: sctp: fix slab corruption from use after free on INIT collisions net: mv643xx_eth: Fix highmem support in non-TSO egress path sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers ... -
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Andy Shevchenko authored
In the case when alloc_netdev fails we return NULL to a caller. But there is no check for NULL in the probe drivers. This patch changes NULL to an error pointer. The function description is amended to reflect what we may get returned. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Two powerpc fixes" * tag 'powerpc-3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore LPCR with LPCR_PECE1 cleared powerpc/xmon: Fix another endiannes issue in RTAS call from xmon
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull one more module fix from Rusty Russell: "SCSI was using module_refcount() to figure out when the module was unloading: this broke with new atomic refcounting. The code is still suspicious, but this solves the WARN_ON()" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scsi: always increment reference count
-
Herbert Xu authored
The socket already carries the net namespace with it so there is no need to be passing another net around. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Govindarajulu Varadarajan authored
With the commit d75b1ade ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When in busy_poll is we return 0 in napi_poll. We should return budget. Signed-off-by:
Govindarajulu Varadarajan <_govind@gmx.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== ipsec 2015-01-26 Just two small fixes for _decode_session6() where we might decode to wrong header information in some rare situations. Please pull or let me know if there are problems. ==================== Signed-off-by: -
Ben Hutchings authored
It is possible to see the old value of the LP advertising flags through ethtool after reconfiguring the PHY and before autonegotiation completes. If autonegotiation is turned off then the last value seen will persist indefinitely. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
David L Stevens says: ==================== sunvnet: fix null pointer deref and crash recovery These patches fix an incorrect ordering in releasing ring data, clear pending tx buffers on a reset, and make the sunvnet driver more reliable when remote systems crash during active transmits. ==================== Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
David L Stevens authored
If a remote machine crashes while there are pending transmit buffers, the sunvnet driver reallocates the ring descriptors giving us enries that have state VIO_DESC_FREE but also an allocated skb. This results in a BUG_ON() call when the remote reboots and we reach that point in the ring. This patch: 1) clears pending tx packets in the ring on port reset 2) changes a BUG_ON() to a pr_warn() when a remote host has given us an invalid descriptor state 3) collapses multiple active buffer frees in a ring to a single message per ring and adds the device name and remote MAC address This fixes the particular problem of not cleaning up pending buffers on a reset, but also prevents us from crashing if the remote handles descriptors out of order or sets an unexpected state for a descriptor. Signed-off-by:
David L Stevens <david.stevens@oracle.com> Signed-off-by:
-
David L Stevens authored
This patch moves the clearing of ring data in vnet_port_free_tx_bufs to after the freeing of pending buffers in the ring. Otherwise, this can result in dereferencing a NULL pointer. Reported-by:
-
Hannes Frederic Sowa authored
Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eba ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by:
-
David S. Miller authored
Ben Hutchings says: ==================== Fixes for sh_eth #3 I'm continuing review and testing of Ethernet support on the R-Car H2 chip. This series fixes the last of the more serious issues I've found. These are not tested on any of the other supported chips. ==================== Signed-off-by: -
Ben Hutchings authored
- Use the return value of dma_map_single(), rather than calling virt_to_page() separately - Check for mapping failue - Call dma_unmap_single() rather than dma_sync_single_for_cpu() Signed-off-by:
-
Ben Hutchings authored
dma_map_single() may fail if an IOMMU or swiotlb is in use, so we need to check for this. Signed-off-by:
-
Ben Hutchings authored
Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: -
Ben Hutchings authored
If RX traffic is overflowing the FIFO or DMA ring, logging every time this happens just makes things worse. These errors are visible in the statistics anyway. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: phy: prevent double suspend This patch series addresses a problem that Fugang and I observed on different platforms where a given PHY device might end-up being suspended twice. Once as part of the call from ndo_open() all the way down to phy_detach() and phy_suspend() and a second time when the generic platform device/driver suspend/resume callbacks are called in drivers/net/phy/mdio_bus.c. Thanks to Fugang for giving this a quick try on i.MX6/FEC and reporting positive test results! ==================== Signed-off-by: -
Florian Fainelli authored
As part of a call to ndo_close() a netdevice driver may call phy_disconnect() -> phy_detach() -> phy_suspend(), such that the PHY is suspsended at this point and a netdevice driver may clock gate the backing peripheral providing MDIO bus accessses as well. Update mdio_bus_phy_may_suspend() to return whether a PHY is allowed to be suspended and conversely resumed if and only if it was not previously suspended before while it is currently in detached (netdev pointer is NULL) state. This fixes bus errors seen during S2/S3 suspend/resume cycles for netdevice drivers such as GENET which clock gates the entire Ethernet MAC, including the MDIO bus block. Acked-by:
Fugang Duan <B38611@freescale.com> Tested-by:
-
Florian Fainelli authored
In order to avoid double calls to phydev->drv->suspend and resume, keep track of whether the PHY has already been suspended as a consequence of a successful call to phy_suspend(). We will use this in our MDIO bus suspend/resume hooks to avoid a double suspend call. Signed-off-by:
-
Florian Fainelli authored
has_fixups was introduced to help keeping track of fixups/quirks running on a PHY device, but we did not update the comment above struct phy_device accordingly. Fixes: b0ae009f (net: phy: add "has_fixups" boolean property") Signed-off-by:
-
Florian Fainelli authored
phy_suspend and phy_resume are an abstraction on top of the PHY device driver suspend and resume callbacks, utilize those since they are the proper interface to suspending and resuming a PHY device. Acked-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Add support to dump cim ibq, obq and qinfo, etc This patch series adds support to dump cim_ibq, cim_obq, sge_qinfo, pm_stats and clk debugfs entries. The patches series is created against 'net-next' tree. And includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
