- 26 Feb, 2010 40 commits
-
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by:
-
Julia Lawall authored
If the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
It is not clear how to share the unlock in the case where the structure containing the lock has to be freed. So the unlock is now duplicated, with one copy moved before the free. The unlock label furthermore is no longer useful and is thus deleted. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,e; identifier f; iterator I; statement S; @@ *kfree(x); ... when != &x when != x = e when != I(x,...) S *x->f // </smpl> Signed-off-by:
-
Alexey Dobriyan authored
Drop S_IRUGO, proc entry doesn't contain read hooks. Drop S_IFREG, simply unnecessary. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Dmitri Belimov authored
Add lost configuration for our TV card. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Roel Kluin authored
video_nr is unsigned so the test did not work. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Roel Kluin authored
Although these sizes may be the same it is better to calculate the size of the source, than the destiny. Signed-off-by:
-
Devin Heitmueller authored
Make the VBI support work for PAL standards in addition to NTSC. This work was sponsored by EyeMagnet Limited. Thanks go out to Andy Walls for providing a CD containing test PAL/VBI captures and to Steven Toth for providing a PVR-350 to do signal generation with. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
When firmware 1.20 was introduced, the dib0700 switched from a polling model using a USB control message, to the messages being delivered on a USB bulk pipe. The code I originally added would do a blocking read on the pipe with a 50ms timeout. Because the dvb-usb-remote code makes use of the global workqueue, this resulted in the global workqueue being blocked 50% of the time. Also, the synchronous urb_bulk_msg() call would burn excess CPU time (reflected as an abnormal increase in the system's load average when devices were connected). Rework the logic so that we now setup an asynchronous callback on the bulk pipe, so that we now only handle RC data when it arrives on the pipe. Note that we provide a stub function for the RC polling callback so that we can continue to leverage the shared code in dvb-usb-rc for the setting up of the input device. Signed-off-by:
-
Jean-Francois Moine authored
The bug was introduced when adding the sensor adcm1700. Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
When loading the register 0x49 of the page 3, the usb_control_msg() sometimes fails with error -71 or -62. This change skips loading the register 0x48. Tested-by:
Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Jean-Francois Moine authored
Some webcams have many interfaces with the same interface class, so the previous interface check did not work. The new code checks if the interface number is zero or the only one. Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
The new names tell the image resolution: 'Scale' is the smaller image. Signed-off-by:
-
Jean-Francois Moine authored
- update copyright and module author - change __u8/16 to u8/16 - set unsigned the sd sensor - initialize the controls by macros Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to: Devin Heitmueller <dheitmueller@kernellabs.com> for double checking it. Signed-off-by: -
Andy Walls authored
This change fixes up saa7127_s_std() generate SECAM out, if the user has requested a 50 Hz video standard set that only contains a request for SECAM standards and not PAL. Only the SAA712[89] chips can generate SECAM, the SAA712[67] chips cannot. I was unclear on the burst start and end values - I couldn't figure out the units - so I left them the same as for the PAL systems. A the video decoders on both a PVR-350 (SAA7115) and an HVR-1600 (CX23418) identify the SECAM signal generated by a SAA7129 with this patch as SECAM. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Sergey Bolshakov authored
Fix the "xceive_pin" setting from "15" to "1" for the PVR2100 -- the same as the PVR3100H. This properly resets the XC2028 tuner on the PVR2100. Sergey's original email report: Hi. Seems cx18 module has incorrect .xceive_pin value for card, as i see lots of i2c errors in dmesg from xc2028. i'm using 2.6.32.2, my hardware is: 00:09.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder [14f1:5b7a] Subsystem: LeadTek Research Inc. Device [107d:6f27] Flags: bus master, medium devsel, latency 64, IRQ 17 Memory at f0000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Kernel driver in use: cx18 Kernel modules: cx18 Following fixes this problem for me, the rest seems working: Reported-by:Sergey Bolshakov <sbolshakov@altlinux.ru> Tested-by:
-
Andy Walls authored
The CX18_CPU_SET_INDEXTABLE command was being called with the wrong number of arguments causing the index table frame type selection mask to be set wrong. Now the IDX stream properly sends entries for I, P, and B frames. Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Andy Walls authored
VIDIOC_G_ENC_INDEX support see the light of day. Some notes: 1. With default capture parameters, the CX23418 seems to transfer 192 index entries (4.5 kB worth) at 10 second intervals. 2. Index streams don't seem to be supported for MPEG 2 TS streams 3. The index entries seem to claim every frame is a B-Frame. Possible firmware bug. 4. The cx18 driver does not try to capture an index stream when inserting sliced VBI into the MPEg stream as the offsets would need fixup. Signed-off-by:
-
Andy Walls authored
According to the v4l2 spec, very old MPEG index entries needs to be discarded in favor of newer index entries. This change ensures the firmware always has buffers for index entries at the expense of the oldest unread buffers. Signed-off-by:
-
Andy Walls authored
This change starts the IDX stream along with the MPG stream as an internal use (only) stream much like the VBI stream can be started as an internal use stream for inserting sliced VBI packets. The IDX stream is not started automatically with an MPEG strem if the IDX stream is disabled (no buffers allocated) or if sliced VBI insertion is being performed by the cx18 driver. The cx18 driver doing sliced VBI insertion makes the offsets in the IDX stream inaccurate for the final MPEG stream presented to user space. Since fixing the IDX offsets ourselves is not easy and we cannot easily do what ivtv does to fix the offsets, we'll make sliced VBI insertion and MPEG Index capture mutually exclusive for now. Signed-off-by:
-
Andy Walls authored
This change allows the IDX stream to be started and stopped as any other stream even though it has no associated device node. This is needed for cx18 driver internal use. Also always tell the CX23418 to generate index entries when an analog capture starts and the IDX stream has had buffers allocated (i.e. is enabled). Signed-off-by:
-
Andy Walls authored
Fix a long standing memory leak of stream buffers for streams that did not have a struct video_device allocated: namely the TS and IDX streams. Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Andy Walls authored
Update the module options related to INDEX stream buffer allocation. A single CX2341[5678] index entry is only 24 bytes. Large buffers for the IDX stream will prevent the CX23418 from transferring index data over at all. Buffers of around 1.5 kB or 64 index entries seem to be just fine. We'll default to 63 buffers/MDLs as that is the firmware limit per stream and IDX stream buffers are not high rate. There is no reason on earth to allocate the previous 1 MB default of buffer space for the IDX stream. This is in anticipation of implementing the G_ENC_INDEX ioctl() in the cx18 driver. Signed-off-by:
-
Marton Nemeth authored
The ctrls field of struct sd_desc is declared as const in gspca.h. It is worth to initialize the content also with constant values. Signed-off-by:
-
Márton Németh authored
The function callbacks in sd_desc are defined at compile time and they do not change at runtime. Make the sd_desc initializations const. Signed-off-by:
-
Jean-Francois Moine authored
The USB video interface was checked as having the number zero, but some webcams have other values. The test is now done on the interface class which may be either 255 (vendor spec) or 0 (class per interface). Signed-off-by:
-
Jean-Francois Moine authored
- adapt the start sequences from the info file of the ms-win driver of the webcams 046d:08a2/046d:08aa (lvWIMv.inf) - disable the brightness for this sensor Signed-off-by:
-
Jean-Francois Moine authored
The previous calculation gave bad gamma tables. Signed-off-by:
-
Jean-Francois Moine authored
- sharpness - brightness for adcm1700 - adjust brightness/exposure for adcm1700 - add some comments Signed-off-by:
-
