KVM x86 MMU changes for 6.7:

 - Clean up code that deals with honoring guest MTRRs when the VM has
   non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.

 - Zap EPT entries when non-coherent DMA assignment stops/start to prevent
   using stale entries with the wrong memtype.

 - Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y, as
   there's zero reason to ignore guest PAT if the effective MTRR memtype is WB.
   This will also allow for future optimizations of handling guest MTRR updates
   for VMs with non-coherent DMA and the quirk enabled.

 - Harden the fast page fault path to guard against encountering an invalid
   root when walking SPTEs.

KVM x86 misc changes for 6.7:

 - Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
   forcing more common use cases to eat the extra memory overhead.

 - Add IBPB and SBPB virtualization support.

 - Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
   creating the original vCPU would cause KVM to try to synchronize the vCPU's
   TSC and thus clobber the correct TSC being set by userspace.

 - Compute guest wall clock using a single TSC read to avoid generating an
   inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.

 - "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
    about a "Firmware Bug" if the bit isn't set for select F/M/S combos.

 - Don't apply side effects to Hyper-V's synthetic timer on writes from
   userspace to fix an issue where the auto-enable behavior can trigger
   spurious interrupts, i.e. do auto-enabling only for guest writes.

 - Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
   without PML enabled.

 - Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.

 - Use octal notation for file permissions through KVM x86.

 - Fix a handful of typo fixes and warts.

KVM x86 Documentation updates for 6.7:

 - Fix various typos, notably a confusing reference to the non-existent
   "struct kvm_vcpu_event" (the actual structure is kvm_vcpu_events, plural).

 - Update x86's kvm_mmu_page documentation to bring it closer to the code
   (this raced with the removal of async zapping and so the documentation is
   already stale; my bad).

 - Document the behavior of x86 PMU filters on fixed counters.

KVM x86 APIC changes for 6.7:

 - Purge VMX's posted interrupt descriptor *before* loading APIC state when
   handling KVM_SET_LAPIC.  Purging the PID after loading APIC state results in
   lost APIC timer IRQs as the APIC timer can be armed as part of loading APIC
   state, i.e. can immediately pend an IRQ if the expiry is in the past.

 - Clear the ICR.BUSY bit when handling trap-like x2APIC writes.  This avoids a
   WARN, due to KVM expecting the BUSY bit to be cleared when sending IPIs.

Merge tag 'kvm-s390-next-6.7-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- nested page table management performance counters

KVM/riscv changes for 6.7

- Smstateen and Zicond support for Guest/VM
- Virtualized senvcfg CSR for Guest/VM
- Added Smstateen registers to the get-reg-list selftests
- Added Zicond to the get-reg-list selftests
- Virtualized SBI debug console (DBCN) for Guest/VM
- Added SBI debug console (DBCN) to the get-reg-list selftests

Merge tag 'loongarch-kvm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.7

Add LoongArch's KVM support. Loongson 3A5000/3A6000 supports hardware
assisted virtualization. With cpu virtualization, there are separate
hw-supported user mode and kernel mode in guest mode. With memory
virtualization, there are two-level hw mmu table for guest mode and host
mode. Also there is separate hw cpu timer with consant frequency in
guest mode, so that vm can migrate between hosts with different freq.
Currently, we are able to boot LoongArch Linux Guests.

Few key aspects of KVM LoongArch added by this series are:
1. Enable kvm hardware function when kvm module is loaded.
2. Implement VM and vcpu related ioctl interface such as vcpu create,
   vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
   get general registers one by one.
3. Hardware access about MMU, timer and csr are emulated in kernel.
4. Hardwares such as mmio and iocsr device are emulated in user space
   such as IPI, irqchips, pci devices etc.

Pull misc x86 fixes from Ingo Molnar:

 - Fix a possible CPU hotplug deadlock bug caused by the new TSC
   synchronization code

 - Fix a legacy PIC discovery bug that results in device troubles on
   affected systems, such as non-working keybards, etc

 - Add a new Intel CPU model number to <asm/intel-family.h>

* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Defer marking TSC unstable to a worker
  x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
  x86/cpu: Add model number for Intel Arrow Lake mobile processor

Pull irq fix from Ingo Molnar:
 "Restore unintentionally lost quirk settings in the GIC irqchip driver,
  which broke certain devices"

* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Don't override quirk settings with default values

Pull perf event fix from Ingo Molnar:
 "Fix a potential NULL dereference bug"

* tag 'perf-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix potential NULL deref

Merge tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - tracing/kprobes: Fix kernel-doc warnings for the variable length
   arguments

 - tracing/kprobes: Fix to count the symbols in modules even if the
   module name is not specified so that user can probe the symbols in
   the modules without module name

* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix symbol counting logic by looking at modules as well
  tracing/kprobes: Fix the description of variable length arguments

Pull dma-mapping fix from Christoph Hellwig:

 - reduce the initialy dynamic swiotlb size to remove an annoying but
   harmless warning from the page allocator (Petr Tesarik)

* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages

Pull char/misc driver fixes from Greg KH:
 "Here are some very small driver fixes for 6.6-final that have shown up
  in the past two weeks. Included in here are:

   - tiny fastrpc bugfixes for reported errors

   - nvmem register fixes

   - iio driver fixes for some reported problems

   - fpga test fix

   - MAINTAINERS file update for fpga

  All of these have been in linux-next this week with no reported
  problems"

* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  fpga: Fix memory leak for fpga_region_test_class_find()
  fpga: m10bmc-sec: Change contact for secure update driver
  fpga: disable KUnit test suites when module support is enabled
  iio: afe: rescale: Accept only offset channels
  nvmem: imx: correct nregs for i.MX6ULL
  nvmem: imx: correct nregs for i.MX6UL
  nvmem: imx: correct nregs for i.MX6SLL
  misc: fastrpc: Unmap only if buffer is unmapped from DSP
  misc: fastrpc: Clean buffers on remote invocation failures
  misc: fastrpc: Free DMA handles for RPC calls with no arguments
  misc: fastrpc: Reset metadata buffer to avoid incorrect free
  iio: exynos-adc: request second interupt only when touchscreen mode is used
  iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
  iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
  dt-bindings: iio: add missing reset-gpios constrain

Pull i2c fixes from Wolfram Sang:
 "Bugfixes for Axxia when it is a target and for PEC handling of
  stm32f7.

  Plus, fix an OF node leak pattern in the mux subsystem"

* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
  i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
  i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
  i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
  i2c: aspeed: Fix i2c bus hang in slave read

Pull clk fixes from Stephen Boyd:
 "Three fixes, one for the clk framework and two for clk drivers:

   - Avoid an oops in possible_parent_show() by checking for no parent
     properly when a DT index based lookup is used

   - Handle errors returned from divider_ro_round_rate() in
     clk_stm32_composite_determine_rate()

   - Fix clk_ops::determine_rate() implementation of socfpga's
     gateclk_ops that was ruining uart output because the divider
     was forgotten about"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: stm32: Fix a signedness issue in clk_stm32_composite_determine_rate()
  clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name
  clk: socfpga: gate: Account for the divider in determine_rate

Pull misc filesystem fixes from Al Viro:
 "Assorted fixes all over the place: literally nothing in common, could
  have been three separate pull requests.

  All are simple regression fixes, but not for anything from this cycle"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
  io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
  sparc32: fix a braino in fault handling in csum_and_copy_..._user()

Recent changes to count number of matching symbols when creating
a kprobe event failed to take into account kernel modules. As such, it
breaks kprobes on kernel module symbols, by assuming there is no match.

Fix this my calling module_kallsyms_on_each_symbol() in addition to
kallsyms_on_each_match_symbol() to perform a proper counting.

Link: https://lore.kernel.org/all/20231027233126.2073148-1-andrii@kernel.org/

Cc: Francis Laniel <flaniel@linux.microsoft.com>
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: b022f0c7 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Use of dget() after we'd dropped ->d_lock is too late - dentry might
be gone by that point.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

->ki_pos value is unreliable in such cases.  For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed.  Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull io_uring fixes from Jens Axboe:
 "Fix for an issue reported where reading fdinfo could find a NULL
  thread as we didn't properly synchronize, and then a disable for the
  IOCB_DIO_CALLER_COMP optimization as a recent reported highlighted how
  that could lead to deadlocks if the task issued async O_DIRECT writes
  and then proceeded to do sync fallocate() calls"

* tag 'io_uring-6.6-2023-10-27' of git://git.kernel.dk/linux:
  io_uring/rw: disable IOCB_DIO_CALLER_COMP
  io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid

Fault handler used to make non-trivial calls, so it needed
to set a stack frame up.  Used to be
	save ... - grab a stack frame, old %o... become %i...
	....
	ret	- go back to address originally in %o7, currently %i7
	 restore - switch to previous stack frame, in delay slot
Non-trivial calls had been gone since ab5e8b33 and that code should
have become
	retl	- go back to address in %o7
	 clr %o0 - have return value set to 0
What it had become instead was
	ret	- go back to address in %i7 - return address of *caller*
	 clr %o0 - have return value set to 0
which is not good, to put it mildly - we forcibly return 0 from
csum_and_copy_{from,to}_iter() (which is what the call of that
thing had been inlined into) and do that without dropping the
stack frame of said csum_and_copy_..._iter().  Confuses the
hell out of the caller of csum_and_copy_..._iter(), obviously...
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: ab5e8b33 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull block fix from Jens Axboe:
 "Just a single fix for a potential divide-by-zero, introduced in this
  cycle"

* tag 'block-6.6-2023-10-27' of git://git.kernel.dk/linux:
  blk-throttle: check for overflow in calculate_bytes_allowed

Pull ATA fix from Damien Le Moal:
 "A single patch to fix a regression introduced by the recent
  suspend/resume fixes.

  The regression is that ATA disks are not stopped on system shutdown,
  which is not recommended and increases the disks SMART counters for
  unclean power off events.

  This patch fixes this by refining the recent rework of the scsi device
  manage_xxx flags"

* tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  scsi: sd: Introduce manage_shutdown device flag

Merge tag 'platform-drivers-x86-v6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:
 "A single patch to extend the AMD PMC driver DMI quirk list
  for laptops which need special handling to avoid NVME s2idle
  suspend/resume errors"

* tag 'platform-drivers-x86-v6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: Add s2idle quirk for more Lenovo laptops

Tetsuo reported the following lockdep splat when the TSC synchronization
fails during CPU hotplug:

   tsc: Marking TSC unstable due to check_tsc_sync_source failed
  
   WARNING: inconsistent lock state
   inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
   ffffffff8cfa1c78 (watchdog_lock){?.-.}-{2:2}, at: clocksource_watchdog+0x23/0x5a0
   {IN-HARDIRQ-W} state was registered at:
     _raw_spin_lock_irqsave+0x3f/0x60
     clocksource_mark_unstable+0x1b/0x90
     mark_tsc_unstable+0x41/0x50
     check_tsc_sync_source+0x14f/0x180
     sysvec_call_function_single+0x69/0x90

   Possible unsafe locking scenario:
     lock(watchdog_lock);
     <Interrupt>
       lock(watchdog_lock);

   stack backtrace:
    _raw_spin_lock+0x30/0x40
    clocksource_watchdog+0x23/0x5a0
    run_timer_softirq+0x2a/0x50
    sysvec_apic_timer_interrupt+0x6e/0x90

The reason is the recent conversion of the TSC synchronization function
during CPU hotplug on the control CPU to a SMP function call. In case
that the synchronization with the upcoming CPU fails, the TSC has to be
marked unstable via clocksource_mark_unstable().

clocksource_mark_unstable() acquires 'watchdog_lock', but that lock is
taken with interrupts enabled in the watchdog timer callback to minimize
interrupt disabled time. That's obviously a possible deadlock scenario,

Before that change the synchronization function was invoked in thread
context so this could not happen.

As it is not crucical whether the unstable marking happens slightly
delayed, defer the call to a worker thread which avoids the lock context
problem.

Fixes: 9d349d47 ("x86/smpboot: Make TSC synchronization function call based")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg064ceg.ffs@tglx

David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.

Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.

Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.

In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.

The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.

One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.

Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.

Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.

Fixes: e179f691 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx

For "reasons" Intel has code-named this CPU with a "_H" suffix.

[ dhansen: As usual, apply this and send it upstream quickly to
	   make it easier for anyone who is doing work that
	   consumes this. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20231025202513.12358-1-tony.luck%40intel.com

Pull iommu fix from Joerg Roedel:

 - Fix boot regression for Sapphire Rapids with Intel VT-d driver

* tag 'iommu-fix-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Avoid unnecessary cache invalidations

Pull powerpc fixes from Michael Ellerman:

 - Fix boot crash with FLATMEM since set_ptes() introduction

 - Avoid calling arch_enter/leave_lazy_mmu() in set_ptes()

Thanks to Aneesh Kumar K.V and Erhard Furtner.

* tag 'powerpc-6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Avoid calling arch_enter/leave_lazy_mmu() in set_ptes
  powerpc/mm: Fix boot crash with FLATMEM

When suspending to idle and resuming on some Lenovo laptops using the
Mendocino APU, multiple NVME IOMMU page faults occur, showing up in
dmesg as repeated errors:

nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000b
address=0xb6674000 flags=0x0000]

The system is unstable afterwards.

Applying the s2idle quirk introduced by commit 455cd867 ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
allows these systems to work with the IOMMU enabled and s2idle
resume to work.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218024Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/ZTlsyOaFucF2pWrL@localhostSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix the following kernel-doc warnings:

kernel/trace/trace_kprobe.c:1029: warning: Excess function parameter 'args' description in '__kprobe_event_gen_cmd_start'
kernel/trace/trace_kprobe.c:1097: warning: Excess function parameter 'args' description in '__kprobe_event_add_fields'

Refer to the usage of variable length arguments elsewhere in the kernel
code, "@..." is the proper way to express it in the description.

Link: https://lore.kernel.org/all/20231027041315.2613166-1-yujie.liu@intel.com/

Fixes: 2a588dd1 ("tracing: Add kprobe event command generation functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310190437.paI6LYJF-lkp@intel.com/Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

The iommu_create_device_direct_mappings() only needs to flush the caches
when the mappings are changed in the affected domain. This is not true
for non-DMA domains, or for devices attached to the domain that have no
reserved regions. To avoid unnecessary cache invalidations, add a check
before iommu_flush_iotlb_all().

Fixes: a48ce36e ("iommu: Prevent RESV_DIRECT devices from blocking domains")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Henry Willard <henry.willard@oracle.com>
Link: https://lore.kernel.org/r/20231026084942.17387-1-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Pull drm fixes from Dave Airlie:
 "This is the final set of fixes for 6.6, just misc bits mainly in
  amdgpu and i915, nothing too noteworthy.

  amdgpu:
   - ignore duplicated BOs in CS parser
   - remove redundant call to amdgpu_ctx_priority_is_valid()
   - Extend VI APSM quirks to more platforms

  amdkfd:
   - reserve fence slot while locking BO

  dp_mst:
   - Fix NULL deref in get_mst_branch_device_by_guid_helper()

  logicvc:
   - Kconfig: Select REGMAP and REGMAP_MMIO

  ivpu:
   - Fix missing VPUIP interrupts

  i915:
   - Determine context valid in OA reports
   - Hold GT forcewake during steering operations
   - Check if PMU is closed before stopping event"

* tag 'drm-fixes-2023-10-27' of git://anongit.freedesktop.org/drm/drm:
  accel/ivpu/37xx: Fix missing VPUIP interrupts
  drm/amd: Disable ASPM for VI w/ all Intel systems
  drm/i915/pmu: Check if pmu is closed before stopping event
  drm/i915/mcr: Hold GT forcewake during steering operations
  drm/logicvc: Kconfig: select REGMAP and REGMAP_MMIO
  drm/i915/perf: Determine context valid in OA reports
  drm/amdkfd: reserve a fence slot while locking the BO
  drm/amdgpu: Remove redundant call to priority_is_valid()
  drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
  drm/amdgpu: ignore duplicate BOs again

Merge tag 'amd-drm-fixes-6.6-2023-10-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.6-2023-10-25:

amdgpu:
- Extend VI APSM quirks to more platforms
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026035452.14921-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-10-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Determine context valid in OA reports (Umesh)
- Hold GT forcewake during steering operations (Matt Roper)
- Check if PMU is closed before stopping event (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZTp8IQ0wxzxVjN7J@intel.com

Short summary of fixes pull:

amdgpu:
- ignore duplicated BOs in CS parser
- remove redundant call to amdgpu_ctx_priority_is_valid()

amdkfd:
- reserve fence slot while locking BO

dp_mst:
- Fix NULL deref in get_mst_branch_device_by_guid_helper()

logicvc:
- Kconfig: Select REGMAP and REGMAP_MMIO

ivpu:
- Fix missing VPUIP interrupts
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026110132.GA10591@linux-uq9g.fritz.box

Commit aa3998db ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") change setting the manage_system_start_stop
flag to false for libata managed disks to enable libata internal
management of disk suspend/resume. However, a side effect of this change
is that on system shutdown, disks are no longer being stopped (set to
standby mode with the heads unloaded). While this is not a critical
issue, this unclean shutdown is not recommended and shows up with
increased smart counters (e.g. the unexpected power loss counter
"Unexpect_Power_Loss_Ct").

Instead of defining a shutdown driver method for all ATA adapter
drivers (not all of them define that operation), this patch resolves
this issue by further refining the sd driver start/stop control of disks
using the new flag manage_shutdown. If this new flag is set to true by
a low level driver, the function sd_shutdown() will issue a
START STOP UNIT command with the start argument set to 0 when a disk
needs to be powered off (suspended) on system power off, that is, when
system_state is equal to SYSTEM_POWER_OFF.

Similarly to the other manage_xxx flags, the new manage_shutdown flag is
exposed through sysfs as a read-write device attribute.

To avoid any confusion between manage_shutdown and
manage_system_start_stop, the comments describing these flags in
include/scsi/scsi.h are also improved.

Fixes: aa3998db ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038
Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull ARM SoC fixes from Arnd Bergmann:
 "A couple of platforms have some last-minute fixes, in particular:

   - riscv gets some fixes for noncoherent DMA on the renesas and thead
     platforms and dts fix for SPI on the visionfive 2 board

   - Qualcomm Snapdragon gets three dts fixes to address board specific
     regressions on the pmic and gpio nodes

   - Rockchip platforms get multiple dts fixes to address issues on the
     recent rk3399 platform as well as the older rk3128 platform that
     apparently regressed a while ago.

   - TI OMAP gets some trivial code and dts fixes and a regression fix
     for the omap1 ams-delta modem

   - NXP i.MX firmware has one fix for a use-after-free but in its error
     handling"

* tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
  riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
  riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
  riscv: dts: thead: set dma-noncoherent to soc bus
  arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
  arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
  clk: ti: Fix missing omap5 mcbsp functional clock and aliases
  clk: ti: Fix missing omap4 mcbsp functional clock and aliases
  ARM: OMAP1: ams-delta: Fix MODEM initialization failure
  soc: renesas: Make ARCH_R9A07G043 depend on required options
  riscv: dts: starfive: visionfive 2: correct spi's ss pin
  firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
  ARM: OMAP: timer32K: fix all kernel-doc warnings
  ARM: omap2: fix a debug printk
  ARM: dts: rockchip: Fix timer clocks for RK3128
  ARM: dts: rockchip: Add missing quirk for RK3128's dma engine
  ARM: dts: rockchip: Add missing arm timer interrupt for RK3128
  ARM: dts: rockchip: Fix i2c0 register address for RK3128
  arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou
  arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou
  ...

Pull networking fixes from Paolo Abeni:
 "Including fixes from WiFi and netfilter.

  Most regressions addressed here come from quite old versions, with the
  exceptions of the iavf one and the WiFi fixes. No known outstanding
  reports or investigation.

  Fixes to fixes:

   - eth: iavf: in iavf_down, disable queues when removing the driver

  Previous releases - regressions:

   - sched: act_ct: additional checks for outdated flows

   - tcp: do not leave an empty skb in write queue

   - tcp: fix wrong RTO timeout when received SACK reneging

   - wifi: cfg80211: pass correct pointer to rdev_inform_bss()

   - eth: i40e: sync next_to_clean and next_to_process for programming
     status desc

   - eth: iavf: initialize waitqueues before starting watchdog_task

  Previous releases - always broken:

   - eth: r8169: fix data-races

   - eth: igb: fix potential memory leak in igb_add_ethtool_nfc_entry

   - eth: r8152: avoid writing garbage to the adapter's registers

   - eth: gtp: fix fragmentation needed check with gso"

* tag 'net-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
  iavf: in iavf_down, disable queues when removing the driver
  vsock/virtio: initialize the_virtio_vsock before using VQs
  net: ipv6: fix typo in comments
  net: ipv4: fix typo in comments
  net/sched: act_ct: additional checks for outdated flows
  netfilter: flowtable: GC pushes back packets to classic path
  i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
  gtp: fix fragmentation needed check with gso
  gtp: uapi: fix GTPA_MAX
  Fix NULL pointer dereference in cn_filter()
  sfc: cleanup and reduce netlink error messages
  net/handshake: fix file ref count in handshake_nl_accept_doit()
  wifi: mac80211: don't drop all unprotected public action frames
  wifi: cfg80211: fix assoc response warning on failed links
  wifi: cfg80211: pass correct pointer to rdev_inform_bss()
  isdn: mISDN: hfcsusb: Spelling fix in comment
  tcp: fix wrong RTO timeout when received SACK reneging
  r8152: Block future register access if register access fails
  r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
  r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()
  ...