- 12 Apr, 2021 4 commits
-
-
José Roberto de Souza authored
This reverts commit 71c1a499. The proper fix is Wa_14013723622, so now we can revert this WA and get back some power savings. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Tested-by:
-
José Roberto de Souza authored
This WA fix some display glitches when the system is under high memory pressure. BSpec: 52890 Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
-
Hans de Goede authored
Instead of sleeping panel_pwr_cycle_delay ms when turning the panel off, record the time it is turned off and if necessary wait any (remaining) time when the panel is turned on again. Also sleep the remaining time on shutdown, because on reboot the GOP will immediately turn on the panel again. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325114823.44922-2-hdegoede@redhat.com
-
Hans de Goede authored
After the recently added commit fe0f1e3b ("drm/i915: Shut down displays gracefully on reboot"), the DSI panel on a Cherry Trail based Predia Basic tablet would no longer properly light up after reboot. I've managed to reproduce this without rebooting by doing: chvt 3; echo 1 > /sys/class/graphics/fb0/blank;\ echo 0 > /sys/class/graphics/fb0/blank Which rapidly turns the panel off and back on again. The vlv_dsi.c code uses an intel_dsi_msleep() helper for the various delays used for panel on/off, since starting with MIPI-sequences version >= 3 the delays are already included inside the MIPI-sequences. The problems exposed by the "Shut down displays gracefully on reboot" change, show that using this helper for the panel_pwr_cycle_delay is not the right thing to do. This has not been noticed until now because normally the panel never is cycled off and directly on again in quick succession. Change the msleep for the panel_pwr_cycle_delay to a normal msleep() call to avoid the panel staying black after a quick off + on cycle. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: fe0f1e3b ("drm/i915: Shut down displays gracefully on reboot") Signed-off-by:
-
- 09 Apr, 2021 5 commits
-
-
José Roberto de Souza authored
PSR2 is defeatured for RKL and ADL-S, no important power impact as those are desktop CPUs and PSR2 was not even enabled by default yet in platforms without PSR2 HW tracking. HSDES: 14011750631 HSDES: 14011741325 BSpec: 53273 Cc: Caz Yokoyama <Caz.Yokoyama@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210408214205.327704-1-jose.souza@intel.com
-
José Roberto de Souza authored
Display features should not be initialized or de-initialized when there is no display. Skip modeset initialization, output setup, plane, crtc, encoder, connector registration, display cdclk and rawclk initialization, display core initialization, etc. Skip the functionality at as high level as possible, and remove any redundant checks. If the functionality is conditional to *other* display checks, do not add more. If the un-initialization has checks for initialization, do not add more. We explicitly do not care about any GMCH/VLV/CHV code paths, as they've always had and will have display. Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Power wells are only part of display block and not necessary when running a headless driver. Reviewed-by:
-
José Roberto de Souza authored
Return ealier in the functions doing interruption setup for GEN8+ also adding a warning in gen8_de_irq_handler() to let us know that something else is still missing. Reviewed-by:
-
Anshuman Gupta authored
Fix static analysis tool uninitialized symbol error. v2: - use ktime_set(0, 0) instead to initialize to zero. [Ankit] Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210408082642.27066-1-anshuman.gupta@intel.com
-
- 08 Apr, 2021 6 commits
-
-
Ville Syrjälä authored
Don't zero out the watermarks for the Y plane since we've already computed them when computing the UV plane's watermarks (since the UV plane always appears before ethe Y plane when iterating through the planes). This leads to allocating no DDB for the Y plane since .min_ddb_alloc also gets zeroed. And that of course leads to underruns when scanning out planar formats. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: dbf71381 ("drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm code") Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Lyude Paul authored
Looks like that there actually are another subset of laptops on the market that don't support the Intel HDR backlight interface, but do advertise support for the VESA DPCD backlight interface despite the fact it doesn't seem to work. Note though I'm not entirely clear on this - on one of the machines where this issue was observed, I also noticed that we appeared to be rejecting the VBT defined backlight frequency in intel_dp_aux_vesa_calc_max_backlight(). It's noted in this function that: /* Use highest possible value of Pn for more granularity of brightness * adjustment while satifying the conditions below. * ... * - FxP is within 25% of desired value. * Note: 25% is arbitrary value and may need some tweak. */ So it's possible that this value might just need to be tweaked, but for now let's just disable the VESA backlight interface unless it's specified in the VBT just to be safe. We might be able to try enabling this again by default in the future. Fixes: 2227816e ("drm/i915/dp: Allow forcing specific interfaces through enable_dpcd_backlight") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/3169Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
-
Jani Nikula authored
Sync up with topic/i915-gem-next and drm-intel-gt-next. Signed-off-by: -
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Features: - Add support for FBs requiring a power-of-two stride padding (Imre) Refactoring: - Disassociate display version from gen (Matt) - Refactor legacy DP and HDMI code to separate files (Ville) - Refactor FB plane code to a separate file (Imre) - Refactor VBT child device info parsing and usage (Jani) - Refactor KBL/TGL/ADL-S display and gt stepping schemes (Jani) Fixes: - DP Link-Training Tunable PHY Repeaters (LTTPR) fixes (Imre) - HDCP fixes (Anshuman) - DP 2.0 HDMI 2.1 PCON Fixed Rate Link (FRL) fixes (Ankit) - Set HDA link parameters in driver (Kai) - Fix enabled_planes bitmask (Ville) - Fix transposed arguments to skl_plane_wm_level() (Ville) - Stop adding planes to the commit needlessly (Ville) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87v996ml17.fsf@intel.com
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2021-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Prepare for local/device memory support on DG1 by starting to use it for kernel internal allocations: context, ring and engine scratch (Matt A, CQ, Abdiel, Imre) - Sandybridge fix to avoid hard hang on ring resume (Chris) - Limit imported dma-buf size to int32 (Matt A) - Double check heartbeat timeout before resetting (Chris) - Use new tasklet API for execution list (Emil) - Fix SPDX checkpats warnings (Chris) - Fixes for various checkpatch warnings (Chris) - Selftest improvements (Chris) - Move the defer_request waiter active assertion to correct spot (Chris) - Make local-memory probing a GT operation (Matt, Tvrtko) - Protect against request freeing during cancellation on wedging (Chris) - Retire unexpected starting state error dumping (Chris) - Distinction of memory regions in debugging (Zbigniew) - Always flush the submission queue on checking for idle (Chris) - Consolidate 2big error check to helper (Matt) - Decrease number of subplatform bits (Tvrtko) - Remove unused internal request priority levels (Chris) - Document the unused internal header bits in buddy allocator (Matt) - Cleanup the region class/instance encoding (Matt) Signed-off-by:
-
Dave Airlie authored
Merge tag 'mediatek-drm-next-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.13 1. Fine tune the line time for EOTp. 2. Add support mt8192 dpi. 3. Make crtc config-updating atomic. 4. Don't support hdmi connector creation. From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210405082248.3578-1-chunkuang.hu@kernel.orgSigned-off-by:
-
- 07 Apr, 2021 3 commits
-
-
Matt Roper authored
Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the display code, we should also kill off our use of the IS_GEN9_* macros too. We'll do the conversion manually this time instead of using Coccinelle since the most logical substitution can depend heavily on the code context, and sometimes we can keep the code simpler if we make additional adjustments such as swapping the order of if/else arms. v2: - Restore a lost negation in intel_pll_is_valid(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Takashi Iwai authored
intel_dsm_platform_mux_info() tries to parse the ACPI package data from _DSM for the debug information, but it assumes the fixed format without checking what values are stored in the elements actually. When an unexpected value is returned from BIOS, it may lead to GPF or NULL dereference, as reported recently. Add the checks of the contents in the returned values and skip the values for invalid cases. v1->v2: Check the info contents before dereferencing, too BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1184074 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - mst: Improve topology logging - edid: Rework and improvements for displayid Driver Changes: - anx7625: Regulators support - bridge: Support for the Chipone ICN6211, Lontium LT8912B - lt9611: Fix 4k panels handling Signed-off-by:
-
- 06 Apr, 2021 1 commit
-
-
Xuezhi Zhang authored
Fix the following coccicheck warning: drivers/gpu/drm/i915//i915_sysfs.c:266:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:285:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:276:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:335:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:390:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:465:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:107:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:75:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:83:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:91:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:99:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/i915//i915_sysfs.c:326:8-16: WARNING: use scnprintf or sprintf Signed-off-by:
Xuezhi Zhang <zhangxuezhi1@yulong.com> Signed-off-by:
-
- 02 Apr, 2021 1 commit
-
-
Gwan-gyeong Mun authored
Due to the changed sequence of activating/deactivating DC3CO, disable DC3CO until the changed dc3co activating/deactivating sequence is applied. References: https://gitlab.freedesktop.org/drm/intel/-/issues/3134Signed-off-by:
-
- 01 Apr, 2021 7 commits
-
-
Imre Deak authored
We need to wait for the DMC FW loader work to complete during shutdown, even if it's unlikely to be still pending by that time, fix this. This also fixes the wakeref tracking WARN during shutdown about the leaked reference we hold due to a missing DMC firmware. While at it add a TODO comment about unifying the shutdown and PM power-off sequences and later these sequences with the driver remove and system/runtime suspend sequences. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> References: https://lore.kernel.org/lkml/20210303055517.GB2708@xsang-OptiPlex-9020Reported-and-tested-by:
kernel test robot <oliver.sang@intel.com> Reported-and-tested-by:
Edward Baker <edward.baker@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Ville Syrjälä authored
According to bspec icl+ no longer need any extra cdclk guardband for 64bpp formats. Make it so. Signed-off-by:
-
Ville Syrjälä authored
Split the glk+ stuff into it's own version of the .min_cdclk() vfunc. Signed-off-by:
-
Dafna Hirschfeld authored
commit f0119514 ("drm/mediatek: mtk_dpi: Create connector for bridges") broke the display support for elm device since mtk_dpi calls drm_bridge_attach with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR while mtk_hdmi does not yet support this flag. Fix this by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in bridge attachment. Implement the drm_bridge_funcs .detect() and .get_edid() operations, and call drm_bridge_hpd_notify() to report HPD. This provides the necessary API to support disabling connector creation. In addition, the field 'conn' is removed from the mtk_hdmi struct since mtk_hdmi don't create a connector. It is replaced with a pointer 'curr_conn' that points to the current connector which can be access through the global state. This patch is inspired by a similar patch for bridge/synopsys/dw-hdmi.c: commit ec971aaa ("drm: bridge: dw-hdmi: Make connector creation optional") But with the difference that in mtk-hdmi only the option of not creating a connector is supported. Fixes: f0119514 ("drm/mediatek: mtk_dpi: Create connector for bridges") Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org>
-
Dafna Hirschfeld authored
The bridge operation '.enable' and the audio cb '.get_eld' access hdmi->conn. In the future we will want to support the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR and then we will not have direct access to the connector. The atomic version '.atomic_enable' allows accessing the current connector from the state. This patch switches the bridge to the atomic version to prepare access to the connector in later patches. Signed-off-by:
-
Hsin-Yi Wang authored
When suspending the driver, anx7625_power_standby() will be called to turn off reset-gpios and enable-gpios. However, power supplies are not disabled. To save power, the driver can get the power supply regulators and turn off them in anx7625_power_standby(). Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
Xin Ji <xji@analogixsemi.com> Signed-off-by:
-
Hsin-Yi Wang authored
anx7625 requires 3 power supply regulators. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
- 31 Mar, 2021 13 commits
-
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next One cleanup - Based on the patch[1], clean up the use of request_irq function series. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?id=cbe16f35bee6880becca6f20d2ebf6b457148552Signed-off-by:
-
ssh://git.freedesktop.org/git/drm/drmDave Airlie authored
special i915-gem-next pull as requested - Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with help from Thomas Hellström) - watchdog (Tvrtko, one patch to cancel individual request from Chris) - legacy ioctl cleanup (Jason+Ashutosh) - i915-gem TODO and RFC process doc (me) - i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it and put it in here too Signed-off-by:
-
Imre Deak authored
Fix the Documentation/gpu/i915:22: /drivers/gpu/drm/i915/intel_runtime_pm.c:423: WARNING: Inline strong start-string without end-string. warning from the htmldocs build. Fixes: 9d58aa46 ("drm/i915: Fix the GT fence revocation runtime PM logic") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20210330150118.1105079-1-imre.deak@intel.com
-
Jani Nikula authored
Avoid any confusion with High Dynamic Range. No functional changes. Reviewed-by:
-
Jani Nikula authored
The DisplayID specifications explicitly call out 0 as a valid payload length for data blocks. The mere presence of a data block, or the information coded in the block specific data (bits 7:3 in offset 1), may be enough to convey the necessary information. Reviewed-by:
-
Jani Nikula authored
Neatly reduce displayid boilerplate in code. Remove excessive debug logging while at it, no other functional changes. The old displayid iterator becomes unused; remove it as well as make drm_find_displayid_extension() static. Reviewed-by:
-
Jani Nikula authored
Neatly reduce displayid boilerplate in code. No functional changes. Reviewed-by:
-
Jani Nikula authored
Neatly reduce displayid boilerplate in code. No functional changes. Reviewed-by:
-
Jani Nikula authored
Iterating DisplayID blocks across sections (in EDID extensions) is unnecessarily complicated for the caller. Implement DisplayID iterators to go through all blocks in all sections. Usage example: const struct displayid_block *block; struct displayid_iter iter; displayid_iter_edid_begin(edid, &iter); displayid_iter_for_each(block, &iter) { /* operate on block */ } displayid_iter_end(&iter); When DisplayID is stored in EDID extensions, the DisplayID sections map to extensions as described in VESA DisplayID v1.3 Appendix B: DisplayID as an EDID Extension. This is implemented here. When DisplayID is stored in its dedicated DDC device 0xA4, according to VESA E-DDC v1.3, different rules apply for the structure. This is not implemented here, as we don't currently use it, but the idea is you'd have a different call for beginning the iteration, for example simply: displayid_iter_begin(displayid, &iter); instead of displayid_iter_edid_begin(), and everything else would be hidden away in the iterator functions. v2: - sizeof(struct displayid_block) -> sizeof(*block) (Ville) - remove __ prefix from displayid_iter_block Reviewed-by: -
Jani Nikula authored
We'll be adding more DisplayID specific functions going forward, so start off by splitting out a few functions to a separate file. We don't bother with exporting the functions; at least for now they should be needed solely within drm.ko. No functional changes. Reviewed-by:
-
Jani Nikula authored
If there's no need to change it, it should be const. There's more to be done, but start off with changes that make follow-up work easier. No functional changes. Reviewed-by:
-
Boris Brezillon authored
This patch adds the missing MODULE_DEVICE_TABLE definitions on different Mediatek drivers which generates correct modalias for automatic loading when these drivers are compiled as an external module. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
-
Anshuman Gupta authored
Fix LC_Send_L_Prime message timeout to 16 as documented in DP HDCP 2.2 errata page 3. https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
