- 14 Jul, 2023 40 commits
-
-
Hans de Goede authored
The supported ad5820 and ad5821 VCMs both use a single 16 bit register which is written by sending 2 bytes with the data directly after sending the i2c-client address. The ad5823 OTOH has a more typical i2c / smbus device setup with multiple 8 bit registers where the first byte send after the i2c-client address is the register address and the actual data only starts from the second byte after the i2c-client address. The ad5823 i2c_ and of_device_id-s was added at the same time as the ad5821 ids with as rationale: """ Some camera modules also refer that AD5823 is a replacement of AD5820: https://download.kamami.com/p564094-OV8865_DS.pdf """ The AD5823 may be an electrical and functional replacement of the AD5820, but from a software pov it is not compatible at all and it is going to need its own driver, drop its id from the ad5820 driver. Fixes: b8bf7313 ("media: ad5820: Add support for ad5821 and ad5823") Cc: Pavel Machek <pavel@ucw.cz> Cc: Ricardo Ribalda Delgado <ribalda@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Tommaso Merciai authored
The format param actually is not used in imx290_ctrl_update function, let's drop this Fixes: bc35f9a2 ("media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s") Signed-off-by:
Tommaso Merciai <tomm.merciai@gmail.com> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
Bingbu Cao authored
On ACPI systems, the HID of ov13b10 is 'OVTI13B1', add this new HID in acpi IDs table to make driver support it. Signed-off-by:
Hao Yao <hao.yao@intel.com> Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Nicolas Ferre authored
Wenyou's email is bouncing, remove him from this camera driver's entry and mark it as orphan. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Bingbu Cao authored
The ov13b10 need be connected to a CIO2 or IPU device by bridge, sometimes the bridge driver was not probed before ov13b10 driver, then the absence of the fwnode endpoint for this device is expected, so driver return -EPROBE_DEFER in this case to let the probe occur after bridge driver. Signed-off-by:
-
Guoniu.zhou authored
OV5640 will output abnormal image data when work at low resolution (320x240, 176x144 and 160x120) after switching from high resolution, such as 1080P, the time interval between high and low switching must be less than 1000ms in order to OV5640 don't enter suspend state during the time. The reason is by 0x3824 value don't restore to initialize value when do resolution switching. In high resolution setting array, 0x3824 is set to 0x04, but low resolution setting array remove 0x3824 in commit db15c195 ("media: ov5640: Remove duplicated mode settings"). So when do resolution switching from high to low, such as 1080P to 320x240, and the time interval is less than auto suspend delay time which means global initialize setting array will not be loaded, the output image data are abnormal. Hence move 0x3824 from ov5640_init_setting[] table to ov5640_setting_low_res[] table and also move 0x4407 0x460b, 0x460c to avoid same issue. Fixes: db15c195 ("media: ov5640: Remove duplicated mode settings") Signed-off-by:
Guoniu.zhou <guoniu.zhou@nxp.com> Reviewed-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by:
-
Jason Chen authored
The HTS value cannot be directly compared to the sensor's output size. It needs to be converted to an absolute time unit. Additionally, the hblank value need to be modified as it was previous invalid. Signed-off-by:
Jason Chen <jason.z.chen@intel.com> Signed-off-by:
-
Sakari Ailus authored
Remove Shawn Tu's and Chiranjeevi Rapolu's e-mail addresses as they are no longer function. Signed-off-by:
-
Sakari Ailus authored
Chiranjeevi's e-mail is bouncing: chiranjeevi.rapolu@intel.com DM3NAM02FT041.mail.protection.outlook.com Remote Server returned '550 5.4.1 Recipient address rejected: Access denied. AS(201806281)' Assign the driver to myself. Signed-off-by:
-
Sakari Ailus authored
Dongchun's e-mail is no longer active and he hasn't given a new one: The following message to <dongchun.zhu@mediatek.com> was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 550-'Relaying mail to dongchun.zhu@mediatek.com is not allowed' Mark the drivers as orphaned. Signed-off-by:
-
Sakari Ailus authored
I maintain V4L2 sensor and lens drivers but there hasn't been a specific MAINTAINERS entry for them. Add it now. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
Shawn Tu's e-mail address is bouncing: shawnx.tu@intel.com Remote Server returned '550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup' Assign the sensor drivers Shawn maintained to myself. Reported-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Bingbu Cao authored
cio2 bridge driver is moved out of ipu3, current ipu3 cio2 driver only has 1 source file, then we can rename the source file back to ipu3-cio2.c. Signed-off-by:
Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by:
-
Bingbu Cao authored
Before bridge driver use CIO2_NUM_PORTS as the maximum supported CSI2 port number. Current bridge driver is moved out of ipu3, so define a new macro in ipu bridge for all IPUs instead of including CIO2 definition. This patch also removes the ipu3-cio2.h inclusion in ipu-bridge.h. Signed-off-by:
-
Bingbu Cao authored
cio2 bridge was involved along with IPU3. However, in fact all Intel IPUs besides IPU3 CIO2 need this bridge driver. This patch move bridge driver out of ipu3 directory and rename as ipu-bridge. Then it can be worked with IPU3 and other Intel IPUs. Signed-off-by:
-
Jack Zhu authored
Add support for Starfive JH7110 SoC which has the cadence csi2 receiver. Reviewed-by:
Jack Zhu <jack.zhu@starfivetech.com> Signed-off-by:
-
Jack Zhu authored
Add support for external MIPI D-PHY. Reviewed-by:
-
Jack Zhu authored
Add operation on reset for Cadence MIPI-CSI2 RX Controller. Reviewed-by:
-
Jack Zhu authored
Add resets property for Cadence MIPI-CSI2 RX controller Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Jack Zhu authored
Convert DT bindings document for Cadence MIPI-CSI2 RX controller to DT schema format. For compatible, new compatibles should not be messed with conversion, but the original binding did not specify any SoC-specific compatible string, so add the StarFive compatible string. Reviewed-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/max9286.c:1707:34: error: ‘max9286_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/ov7740.c:1203:34: error: ‘ov7740_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/ov2680.c:1149:34: error: ‘ov2680_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/ov2640.c:1290:34: error: ‘ov2640_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/mt9m111.c:1370:34: error: ‘mt9m111_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/isl7998x.c:1557:34: error: ‘isl7998x_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/media/platform/mediatek/mdp/mtk_mdp_core.c:31:34: error: ‘mtk_mdp_comp_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:818:34: error: ‘sun8i_a83t_mipi_csi2_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:751:34: error: ‘sun6i_mipi_csi2_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:401:34: error: ‘sun6i_csi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:627:34: error: ‘mdp_sub_comp_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c:49:34: error: ‘mdp_of_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/marvell/mmp-driver.c:364:34: error: ‘mmpcam_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/verisilicon/hantro_drv.c:622:34: error: ‘of_hantro_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/ti/am437x/am437x-vpfe.c:2620:34: error: ‘vpfe_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/samsung/s5p-jpeg/jpeg-core.c:3124:34: error: ‘samsung_jpeg_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/intel/pxa_camera.c:2449:34: error: ‘pxa_camera_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/allegro-dvt/allegro-core.c:3995:34: error: ‘allegro_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/rc/ir-rx51.c:264:34: error: ‘ir_rx51_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/rc/gpio-ir-tx.c:24:34: error: ‘gpio_ir_tx_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
