This adds IPv6 support to the interfaces that are used to express nfsd
exports.  All addressed are stored internally as IPv6; backwards
compatibility is maintained using mapped addresses.

Thanks to Bruce Fields, Brian Haley, Neil Brown and Hideaki Joshifuji
for comments
Signed-off-by: Aurelien Charbon <aurelien.charbon@bull.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Brian Haley <brian.haley@hp.com>
Cc:  YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Have lockd_up start lockd using kthread_run. With this change,
lockd_down now blocks until lockd actually exits, so there's no longer
need for the waitqueue code at the end of lockd_down. This also means
that only one lockd can be running at a time which simplifies the code
within lockd's main loop.

This also adds a check for kthread_should_stop in the main loop of
nlmsvc_retry_blocked and after that function returns. There's no sense
continuing to retry blocks if lockd is coming down anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

When using kthreads that call into svc_recv, we want to make sure that
they do not block there for a long time when we're trying to take down
the kthread.

This patch changes svc_recv() to check kthread_should_stop() at the same
places that it checks to see if it's signalled(). Also check just before
svc_recv() tries to schedule(). By making sure that we check it just
after setting the task state we can avoid having to use any locking or
signalling to ensure it doesn't block for a long time.

There's still a chance of a 500ms sleep if alloc_page() fails, but
that should be a rare occurrence and isn't a terribly long time in
the context of a kthread being taken down.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Needed since the plan is to not have a svc_create_thread helper and to
have current users of that function just call kthread_run directly.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Lockd caches information about hosts that have recently held locks to
expedite the taking of further locks.

It periodically discards this information for hosts that have not been
used for a few minutes.

lockd currently has a value NLM_HOST_MAX, and changes the 'garbage
collection' behaviour when the number of hosts exceeds this threshold.

However its behaviour is strange, and likely not what was intended.
When the number of hosts exceeds the max, it scans *less* often (every
2 minutes vs every minute) and allows unused host information to
remain around longer (5 minutes instead of 2).

Having this limit is of dubious value anyway, and we have not
suffered from the code not getting the limit right, so remove the
limit altogether.  We go with the larger values (discard 5 minute old
hosts every 2 minutes) as they are probably safer.

Maybe the periodic garbage collection should be replace to with
'shrinker' handler so we just respond to memory pressure....
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [patch 7/7] vfs: mountinfo: show dominating group id
  [patch 6/7] vfs: mountinfo: add /proc/<pid>/mountinfo
  [patch 5/7] vfs: mountinfo: allow using process root
  [patch 4/7] vfs: mountinfo: add mount peer group ID
  [patch 3/7] vfs: mountinfo: add mount ID
  [patch 2/7] vfs: mountinfo: add seq_file_root()
  [patch 1/7] vfs: mountinfo: add dentry_path()
  [PATCH] remove unused label in xattr.c (noise from ro-bind)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  iwlwifi: Fix built-in compilation of iwlcore
  net: Unexport move_addr_to_{kernel,user}
  rt2x00: Select LEDS_CLASS.
  iwlwifi: Select LEDS_CLASS.
  leds: Do not guard NEW_LEDS with HAS_IOMEM
  [IPSEC]: Fix catch-22 with algorithm IDs above 31
  time: Export set_normalized_timespec.
  tcp: Make use of before macro in tcp_input.c
  hamradio: Remove unneeded and deprecated cli()/sti() calls in dmascc.c
  [NETNS]: Remove empty ->init callback.
  [DCCP]: Convert do_gettimeofday() to getnstimeofday().
  [NETNS]: Don't initialize err variable twice.
  [NETNS]: The ip6_fib_timer can work with garbage on net namespace stop.
  [IPV4]: Convert do_gettimeofday() to getnstimeofday().
  [IPV4]: Make icmp_sk_init() static.
  [IPV6]: Make struct ip6_prohibit_entry_template static.
  tcp: Trivial fix to correct function name in a comment in net/ipv4/tcp.c
  [NET]: Expose netdevice dev_id through sysfs
  skbuff: fix missing kernel-doc notation
  [ROSE]: Fix soft lockup wrt. rose_node_list_lock

PNP_MAX_IRQ is 2
If a device invokes pnpacpi_parse_allocated_irqresource() 0, 1, or 2 times, we are happy.
The 3rd time, we will fail and print "pnpacpi: exceeded the max number of IRQ resources: 2"
The 4th and subsequent calls (if this ever happened) would silently scribble on
irq_resource[2], which doesn't actualy exist.
Found-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch fixes problem in Makefile that prevented
built-in compilation of iwlcore

Commit that caused this problem: eadd3c4b ("iwlwifi: make Makefile
more concise")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Yi Zhu <yi.zhu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the removal of the Solaris binary emulation the exports of 
move_addr_to_{kernel,user} are no longer used.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

The LEDS infrastructure itself does not require anything
that a platform dependant upon HAS_IOMEM.

The individual drivers do, but they are properly guarded
with the necessary platform dependencies.

One can even imagine a hypervisor based LED driver that
a platform without HAS_IOMEM might have.
Signed-off-by: David S. Miller <davem@davemloft.net>

Show peer group ID of nearest dominating group that has intersection
with the mount's namespace.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[mszeredi@suse.cz] rewrite and split big patch into managable chunks

/proc/mounts in its current form lacks important information:

 - propagation state
 - root of mount for bind mounts
 - the st_dev value used within the filesystem
 - identifier for each mount and it's parent

It also suffers from the following problems:

 - not easily extendable
 - ambiguity of mountpoints within a chrooted environment
 - doesn't distinguish between filesystem dependent and independent options
 - doesn't distinguish between per mount and per super block options

This patch introduces /proc/<pid>/mountinfo which attempts to address
all these deficiencies.

Code shared between /proc/<pid>/mounts and /proc/<pid>/mountinfo is
extracted into separate functions.

Thanks to Al Viro for the help in getting the design right.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Allow /proc/<pid>/mountinfo to use the root of <pid> to calculate
mountpoints.

 - move definition of 'struct proc_mounts' to <linux/mnt_namespace.h>
 - add the process's namespace and root to this structure
 - pass a pointer to 'struct proc_mounts' into seq_operations

In addition the following cleanups are made:

 - use a common open function for /proc/<pid>/{mounts,mountstat}
 - surround namespace.c part of these proc files with #ifdef CONFIG_PROC_FS
 - make the seq_operations structures const
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a unique ID to each peer group using the IDR infrastructure.  The
identifiers are reused after the peer group dissolves.

The IDR structures are protected by holding namepspace_sem for write
while allocating or deallocating IDs.

IDs are allocated when a previously unshared vfsmount becomes the
first member of a peer group.  When a new member is added to an
existing group, the ID is copied from one of the old members.

IDs are freed when the last member of a peer group is unshared.

Setting the MNT_SHARED flag on members of a subtree is done as a
separate step, after all the IDs have been allocated.  This way an
allocation failure can be cleaned up easilty, without affecting the
propagation state.

Based on design sketch by Al Viro.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a unique ID to each vfsmount using the IDR infrastructure.  The
identifiers are reused after the vfsmount is freed.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a new function:

  seq_file_root()

This is similar to seq_path(), but calculates the path relative to the
given root, instead of current->fs->root.  If the path was unreachable
from root, then modify the root parameter to reflect this.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[mszeredi@suse.cz] split big patch into managable chunks

Add the following functions:

  dentry_path()
  seq_dentry()

These are similar to d_path() and seq_path().  But instead of
calculating the path within a mount namespace, they calculate the path
from the root of the filesystem to a given dentry, ignoring mounts
completely.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] get rid of __exit_files(), __exit_fs() and __put_fs_struct()
  [PATCH] proc_readfd_common() race fix
  [PATCH] double-free of inode on alloc_file() failure exit in create_write_pipe()
  [PATCH] teach seq_file to discard entries
  [PATCH] umount_tree() will unhash everything itself
  [PATCH] get rid of more nameidata passing in namespace.c
  [PATCH] switch a bunch of LSM hooks from nameidata to path
  [PATCH] lock exclusively in collect_mounts() and drop_collected_mounts()
  [PATCH] move a bunch of declarations to fs/internal.h

Commit 88452565 ("PCI: clean up resource
alignment management") didn't set the alignment information for the
cardbus window resources, causing their subsequent allocations to fail
miserably with a message like

  yenta_cardbus 0000:15:00.0: device not available because of BAR 7 [100:1ff] collisions
  yenta_cardbus: probe of 0000:15:00.0 failed with error -16

or similar.

This fixes it and clarifies the code a bit too (we used to have to use
the insane PCI bridge alignment logic that put the alignment in the
"start" field, this makes it use the slightly easier-to-understand
size-based alignment, and allows us to set the resource start to zero
until it gets allocated).
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prevent bus_remove_device() from crashing if dev->knode_bus has not been
initialized before it's called.

This can happen if the device_add() ended up breaking out early due to
an error, for example.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Do not refuse to actually register children of suspended devices,
but still warn about attempts to do that.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The only reason to have separated __...() for those was to keep them inlined
for local users in exit.c.  Since Alexey removed the inline on those, there's
no reason whatsoever to keep them around; just collapse with normal variants.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Since we drop the rcu_read_lock inside the loop, we can't assume
that files->fdt will remain unchanged (and not freed) between
iterations.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Duh...  Fortunately, the bug is quite recent (post-2.6.25) and, embarrassingly,
mine ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] run drivers/misc/sgi-xp through scripts/checkpatch.pl
  [IA64] run rest drivers/misc/sgi-xp through scripts/Lindent
  [IA64] run some drivers/misc/sgi-xp through scripts/Lindent
  [IA64] move XP and XPC to drivers/misc/sgi-xp
  [IA64] minor irq handler cleanups
  [IA64] simplify notify hooks in mca.c
  [IA64] do notify DIE_MCA_MONARCH_PROCESS for each monarchs
  [IA64] disable interrupts on exit of ia64_trace_syscall

Use offset type consistently.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux fixups needed for preemptable RCU from -rt
  SELinux: no BUG_ON(!ss_initialized) in selinux_clone_mnt_opts

Addressed issues raised by scripts/checkpatch.pl. Removed unnecessary curly
braces. Eliminated uses of volatiles and use of kernel_thread() and daemonize().
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Ran patches through scripts/Lindent (part 2).
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Ran patches through scripts/Lindent (part 1).
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Move XPC and XPNET from arch/ia64/sn/kernel to drivers/misc/sgi-xp.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Fix platform driver hotplug/coldplug
  i2c: New driver for the SuperH Mobile I2C bus controller
  i2c/scx200_acb: Don't use 0 as NULL pointer
  i2c-bfin-twi: Fix mismatch in add timer and delete timer
  i2c-bfin-twi: Just let i2c-bfin-twi driver depends on BLACKFIN
  i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log
  i2c-bfin-twi: Cleanup driver descriptions, versions and some module useful information
  i2c-bfin-twi: Add missing pin mux operation
  i2c-bfin-twi: Add platform_resource interface to support multi-port TWI controllers
  i2c-bfin-twi: Add repeat start feature to avoid break of a bundle of i2c master xfer operation
  i2c: Remove trailing whitespaces in busses/Kconfig
  i2c: Replace remaining __FUNCTION__ occurrences
  i2c: Renesas SH7760 I2C master driver
  i2c-dev: Split i2cdev_ioctl
  i2c-ibm_iic: Support building as an of_platform driver
  i2c-ibm_iic: Change the log levels
  i2c: Add platform driver on top of the new pca-algorithm
  i2c-algo-pca: Extend for future drivers
  i2c-algo-pca: Remove trailing whitespaces and unnecessary UTF
  i2c: Remove the algorithm drivers from the config menu

Add missing kernel-doc in kernel/sched.c:

Warning(linux-2.6.25-git3//kernel/sched.c:7044): No description found for parameter 'span'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: linux/{dlm,dlm_device}.h: cleanup for userspace
  dlm: common max length definitions
  dlm: move plock code from gfs2
  dlm: recover nodes that are removed and re-added
  dlm: save master info after failed no-queue request
  dlm: make dlm_print_rsb() static
  dlm: match signedness between dlm_config_info and cluster_set

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Suppress hidinput for Samsung IR control
  HID: remove 60x GTCO devices from blacklist
  HID: export headers properly
  HID: WiseGroup 866 Dual Joypad needs output reports quirk
  HID: ThrustMaster FF driver is no longer experimental
  HID: Logitech diNovo Mini pad support
  HID: fix race between open() and disconnect() in usbhid
  HID: make hid_input_field and usbhid_modify_dquirk static
  HID: pass numbered reports properly to hidraw
  HID: fix misplaced rdesc quirk
  HID: force feedback driver for Logitech Rumblepad 2
  HID: move wait from hid to usbhid
  HID: make function from dbg_hid
  HID: fix sparse warnings
  HID: only dump report traffic with debug level 2
  HID: patch to add NOGET for DMI/Acomdata
  HID: Sunplus Wireless Desktop needs report descriptor fixup
  HID: quirk for MS Wireless Desktop Receiver (model 1028)
  HID: fixup fullspeed interval on highspeed Afatech DVB-T IR kbd
  HID: fix build failure in hiddev_ioctl with gcc 3.2