- 06 Nov, 2018 4 commits
-
-
Harry Wentland authored
It's unnecessarily duplicating drm_plane_type. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Shaokun Zhang authored
RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu <charlene.liu@amd.com> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
David Francis authored
Amgpu's backlight update status function was returning 1 (an error value) when the backlight property was 0. This breaks users that assume 0 is a valid backlight value (which is a correct assumption) If the user passes in a backlight value of 0, tell them everything is fine, then write a value of 1 to hardware. Signed-off-by: David Francis <David.Francis@amd.com> Bugzilla: https://bugs.freedesktop.org/108668 Fixes: 416615ea9578 ("drm/amd/display: set backlight level limit to 1") Cc: Suresh.Guttula@amd.com Cc: Harry.Wentland@amd.com Cc: Samantham@posteo.net Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Leo Li authored
Mainly adding the WAFL spread spectrum info, for adjusting display clocks when XGMI is enabled. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 05 Nov, 2018 36 commits
-
-
Christian König authored
The MMHUB is not affected by this. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
This code is not performance critical. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Move the kiq handling into amdgpu_virt.c and drop the fallback. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
might_sleep() is supposed to raise if warning if called in interrupt or atomic context. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmitry V. Levin authored
Consistently use types provided by <linux/types.h> via <drm/drm.h> to fix struct kfd_ioctl_get_queue_wave_state_args userspace compilation errors. Fixes: 5df099e8 ("drm/amdkfd: Add wavefront context save state retrieval ioctl") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmitry V. Levin authored
Consistently use types provided by <linux/types.h> via <drm/drm.h> to fix the following linux/kfd_ioctl.h userspace compilation errors: /usr/include/linux/kfd_ioctl.h:250:2: error: unknown type name 'uint32_t' uint32_t reset_type; /usr/include/linux/kfd_ioctl.h:251:2: error: unknown type name 'uint32_t' uint32_t reset_cause; /usr/include/linux/kfd_ioctl.h:252:2: error: unknown type name 'uint32_t' uint32_t memory_lost; /usr/include/linux/kfd_ioctl.h:253:2: error: unknown type name 'uint32_t' uint32_t gpu_id; Fixes: 0c119aba ("drm/amd: Add kfd ioctl defines for hw_exception event") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Vega10 has multiple interrupt rings, so this can be called from multiple calles at the same time resulting in: [ 71.779334] ================================ [ 71.779406] WARNING: inconsistent lock state [ 71.779478] 4.19.0-rc1+ #44 Tainted: G W [ 71.779565] -------------------------------- [ 71.779637] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 71.779740] kworker/6:1/120 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 71.779832] 00000000ad761971 (&(&kfd->interrupt_lock)->rlock){?...}, at: kgd2kfd_interrupt+0x75/0x100 [amdgpu] [ 71.780058] {IN-HARDIRQ-W} state was registered at: [ 71.780115] _raw_spin_lock+0x2c/0x40 [ 71.780180] kgd2kfd_interrupt+0x75/0x100 [amdgpu] [ 71.780248] amdgpu_irq_callback+0x6c/0x150 [amdgpu] [ 71.780315] amdgpu_ih_process+0x88/0x100 [amdgpu] [ 71.780380] amdgpu_irq_handler+0x20/0x40 [amdgpu] [ 71.780409] __handle_irq_event_percpu+0x49/0x2a0 [ 71.780436] handle_irq_event_percpu+0x30/0x70 [ 71.780461] handle_irq_event+0x37/0x60 [ 71.780484] handle_edge_irq+0x83/0x1b0 [ 71.780506] handle_irq+0x1f/0x30 [ 71.780526] do_IRQ+0x53/0x110 [ 71.780544] ret_from_intr+0x0/0x22 [ 71.780566] cpuidle_enter_state+0xaa/0x330 [ 71.780591] do_idle+0x203/0x280 [ 71.780610] cpu_startup_entry+0x6f/0x80 [ 71.780634] start_secondary+0x1b0/0x200 [ 71.780657] secondary_startup_64+0xa4/0xb0 Fix this by always using irq save spin locks. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Get the sdma index from ring v2: refine function name Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Flora Cui <flora.cui@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
there is no functional changes.just refine function name to keep consistence with other files. change amdgpu_get_sdma_instance to amdgpu_sdma_get_instance_from_ring. suggested by alex. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Flora Cui <flora.cui@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
Convert the operands on the two sides into the same granularity. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
use the point of struct amdgpu_job as the function argument instand of vmid, so the other members of struct amdgpu_job can be visit in emit_ib function. v2: add a wrapper for getting the VMID add the job before the ib on the parameter list. v3: refine the wrapper name Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
In order to support new asics and MCBP feature enablement on baremetal. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
In baremetal, also need to reserve csa for preemption. so move the csa related code out of sriov. Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
There is no functional changes, Use function arguments for SRIOV special variables which is hardcode in those functions. so we can share those functions in baremetal. Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
driver didn't use this address so far. Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Junwei Zhang authored
The wptr value will be shitfed when function returns. Remove the redundant shift and clean up. Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Junwei Zhang authored
It blocks most of sanity tests, so disable it for now. Tested-by: Chen Gong <Curry.Gong@amd.com> Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Some new variants require updated firmware. V2: add MODULE_FIRMWARE for new firmwares Reviewed-by: Huang Rui <ray.huang@amd.com> (v1) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Lewis Huang authored
[Why] Need to disable EDP backlight when enter S4 with EDP only and resume from S4 with secondary only. [How] Align the real hw and sw state via vBios scratch register in function enable_accelerated_mode when resume from S4. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Fatemeh Darbehani authored
[Why] When going to full-screen mode commit_planes_for_stream tries to decrease dcf_deep_sleep value, but safe_to_lower is false, so we don't send the new value to SMU but dc context gets updated. Later when dc_post_update_surfaces_to_stream tries to lower dcf_ds when safe_to_lower is true, this check prevents the message from being sent. [How] Remove the check that compares new value with what is stored in dc_context. This check is not necessary as dcn1_update_clocks already checks if the value is different from the current dcf_dp value. Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Charlene Liu authored
[Description] This is based on HW programming guide update. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Anthony Koo authored
[Why] DM may want to understand any backlight optimizations applied, so DM needs a way to query from the HW both the real current backlight, which may be value during transition. And also target backlight, which may be after some backlight optimizations applied. [How] Add interface to query current and target backlight levels Target level may indicate backlight level after backlight optimization and reductions are applied. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] The igt@kms_plane@pixel-format-pipe tests can create a sequence where stream_state is NULL during amdgpu_dm_crtc_set_crc_source which results in a null pointer dereference. [How] Guard against stream_state being NULL before accessing its fields. This doesn't fix the root cause of the issue so a DRM_ERROR is generated to still fail the tests. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmytro Laktyushkin authored
Curretly dc will incorrectly calculate viewport when there is rotation or mirror being applied Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Su Chung <Su.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Fatemeh Darbehani authored
[Why] In DCN we want direct DC to SMU calls, with minimal interference from pplib. The reason for each pp_smu interface mapping to 1 SMU message is so we can have the sequencing of different SMU message in DC and shared across different OS's. This will also simplify debugging as DAL owns this interaction and there's no confusion about division of ownership. [How] Part 4: Change clock units so they match the values PPLib sends to SMU. Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Krunoslav Kovac authored
[Why] On DCN1/DCE, There are two functions programming OCSC: program_csc_matrix and program_output_csc. They do the same thing. [How] Consolidate to use only program_output_csc. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Anthony Koo authored
variableNamingsLikeSo aren't to convention. use_this_instead. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Anthony Koo authored
[Why] We want to increase precision for backlight setting. But DC interface takes 8 bit backlight level value only. [How] DMCU already takes 16 bit backlight level. Expand the DC interface to take 16.16 bit value. Max 32 bit backlight value (0xFFFF) will represent max backlight (100%) Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Eric Bernstein authored
They are no longer relevant Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Leo Li authored
[Why] Documentation is helpful for the community to understand our code. This change does some high-level documentation of some DM interfaces with DRM, and the amdgpu base driver. [How] An entry for AMDgpu DC has been added to Documentation/gpu/drivers.rst TOC. amdgpu-dc.rst is created to pull in inline doc-strings, which: - Provides an overview for "What is DM?" - Documents AMDgpu DM lifecyle - Documents IRQ management - Documents atomic_check and commit_tail interfaces Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bhawanpreet Lakha authored
[Why] Fix surface/plane potential nullptr [How] add null check Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Steven Chiu authored
Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
[Why] Coverity found various high-impact issues that need resolving. [How] Fix some buffer overruns and uninitialized variables. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmytro Laktyushkin authored
We do not need to adjust surface scaling when p2i is enabled and we do not support interlaced timing otherwise Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nevenko Stupar authored
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmytro Laktyushkin authored
Gabe's formula sometimes uses values from non-existent 'unsupported' state to do validation. This change adds this extra state so validation can work correctly. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-