When query/report packets are received, mld module processes them.
But they are processed under BH context so it couldn't use sleepable
functions. So, in order to switch context, the two workqueues are
added which processes query and report event.

In the struct inet6_dev, mc_{query | report}_queue are added so it
is per-interface queue.
And mc_{query | report}_work are workqueue structure.

When the query or report event is received, skb is queued to proper
queue and worker function is scheduled immediately.
Workqueues and queues are protected by spinlock, which is
mc_{query | report}_lock, and worker functions are protected by RTNL.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ifmcaddr6 has been protected by inet6_dev->lock(rwlock) so that
the critical section is atomic context. In order to switch this context,
changing locking is needed. The ifmcaddr6 actually already protected by
RTNL So if it's converted to use RCU, its control path context can be
switched to sleepable.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ip6_sf_list has been protected by mca_lock(spin_lock) so that the
critical section is atomic context. In order to switch this context,
changing locking is needed. The ip6_sf_list actually already protected
by RTNL So if it's converted to use RCU, its control path context can
be switched to sleepable.
But It doesn't remove mca_lock yet because ifmcaddr6 isn't converted
to RCU yet. So, It's not fully converted to the sleepable context.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sflist has been protected by rwlock so that the critical section
is atomic context.
In order to switch this context, changing locking is needed.
The sflist actually already protected by RTNL So if it's converted
to use RCU, its control path context can be switched to sleepable.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The purpose of mc_lock is to protect inet6_dev->mc_tomb.
But mc_tomb is already protected by RTNL and all functions,
which manipulate mc_tomb are called under RTNL.
So, mc_lock is not needed.
Furthermore, it is spinlock so the critical section is atomic.
In order to reduce atomic context, it should be removed.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mcast.c has several timers for delaying works.
Timer's expire handler is working under atomic context so it can't use
sleepable things such as GFP_KERNEL, mutex, etc.
In order to use sleepable APIs, it converts from timers to delayed work.
But there are some critical sections, which is used by both process
and BH context. So that it still uses spin_lock_bh() and rwlock.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethtool: fec: ioctl kdoc touch ups

A few touch ups from v1 review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

kdoc does not have good support for documenting defines,
and we can't abuse the enum documentation because it
generates warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dan points out we need to use the mask not the bit (which is 0).
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 42ce127d ("ethtool: fec: sanitize ethtool_fecparam->fec")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct ethtool_fecparam::reserved can't be used in SET, because
ethtool user space doesn't zero-initialize the structure.
Make this clear.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
MPTCP: Cleanup and address advertisement fixes

This patch series contains cleanup and fixes we have been testing in the
MPTCP tree. MPTCP uses TCP option headers to advertise additional
address information after an initial connection is established. The main
fixes here deal with making those advertisements more reliable and
improving the way subflows are created after an advertisement is
received.

Patches 1, 2, 4, 10, and 12 are for various cleanup or refactoring.

Patch 3 skips an extra connection attempt if there's already a subflow
connection for the newly received advertisement.

Patches 5, 6, and 7 make sure that the next address is advertised when
there are multiple addresses to share, the advertisement has been
retried, and the peer has not echoed the advertisement. Self tests are
updated.

Patches 8 and 9 fix a problem similar to 5/6/7, but covers a case where
the failure was due to a subflow connection not completing.

Patches 11 and 13 send a bare ack to revoke an advertisement rather than
waiting for other activity to trigger a packet send. This mirrors the
way acks are sent for new advertisements. Self test is included.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds testcases for signalling multi valid and invalid
addresses for both signal_address_tests and remove_tests.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since mptcp_pm_nl_add_addr_send_ack is now used for both ADD_ADDR and
RM_ADDR cases, rename it to mptcp_pm_nl_addr_send_ack.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the sending ACK conditions for the ADD_ADDR, send an
ACK packet for RM_ADDR too.

In mptcp_pm_remove_addr, invoke mptcp_pm_nl_add_addr_send_ack to send
the ACK packet.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

msk->pm.addr_signal is cleared in mptcp_pm_add_addr_signal, no need to
clear it in mptcp_pm_nl_add_addr_send_ack again. Drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an invalid address was announced, the subflow couldn't be created
for this address. Therefore mptcp_pm_nl_subflow_established couldn't be
invoked. Then the next addresses in the local address list didn't have a
chance to be announced.

This patch invokes the new function mptcp_pm_add_addr_echoed when the
address is echoed. In it, use mptcp_lookup_anno_list_by_saddr to check
whether this address is in the anno_list. If it is, PM schedules the
status MPTCP_PM_SUBFLOW_ESTABLISHED to invoke
mptcp_pm_create_subflow_or_signal_addr to deal with the next address in
the local address list.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch exported the static function lookup_anno_list_by_saddr, and
renamed it to mptcp_lookup_anno_list_by_saddr.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch added the timeout testcases for multi addresses, valid and
invalid.

These testcases need to transmit 8 ADD_ADDRs, so add a new speed level
'least' to set 10 to mptcp_connect to slow down the transmitting process.
The original speed level 'slow' still uses 50.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some testcases, we need to slow down the transmitting process. This
patch added a new argument named cfg_do_w for cfg_remove to allow the
caller to pass an argument to cfg_remove.

In do_rnd_write, use this cfg_do_w to control the transmitting speed.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch called mptcp_pm_subflow_established to move to the next address
when an ADD_ADDR has been retransmitted the maximum number of times.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch drops the unused parameter subflow in
mptcp_pm_subflow_established().

Fixes: 926bdeab ("mptcp: Implement path manager interface commands")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch added a new helper named lookup_subflow_by_daddr to find
whether the destination address is in the msk's conn_list.

In mptcp_pm_nl_add_addr_received, use lookup_subflow_by_daddr to check
whether the announced address is already connected. If it is, skip
connecting this address and send out the echo.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop the redundant argument 'port' from mptcp_pm_announce_addr, use the
port field of another argument 'addr' instead.

Fixes: 0f5c9e3f ("mptcp: add port parameter for mptcp_pm_announce_addr")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the previous patch we can easily avoid invoking
the workqueue to perform the retransmission, if the
msk socket lock is held at rtx timer expiration.

This also simplifies the relevant code.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: rework resource programming

This series reworks the way IPA resources are defined and
programmed.  It is a little long--and I apologize for that--but
I think the patches are best taken together as a single unit.

The IPA hardware operates with a set of distinct "resources."  Each
hardware instance has a fixed number of each resource type available.
Available resources are divided into smaller pools, with each pool
shared by endpoints in a "resource group."  Each endpoint is thus
assigned to a resource group that determines which pools supply
resources the IPA hardware uses to handle the endpoint's processing.

The exact set of resources used can differ for each version of IPA.
Except for IPA v3.0 and v3.1, there are 5 source and 2 destination
resource types, but there's no reason to assume this won't change.

The number of resource groups used *does* typically change based on
the hardware version.  For example, some versions target reduced
functionality and support fewer resource groups.

With that as background...

The net result of this series is to improve the flexibility with
which IPA resources and resource groups are defined, permitting each
version of IPA to define its own set of resources and groups.  Along
the way it isolates the resource-related code, and fixes a few bugs
related to resource handling.

The first patch moves resource-related code to a new C file (and
header).  It generates a checkpatch warning about updating
MAINTAINERS, which can be ignored.  The second patch fixes a bug,
but the bug does not affect SDM845 or SC7180.

The third patch defines an enumerated type whose members provide
symbolic names for resource groups.

The fourth defines some resource limits for SDM845 that were not
previously being programmed.  That platform "works" without this,
but to be correct, these limits should really be programmed.

The fifth patch uses a single enumerated type to define both source
and destination resource type IDs, and the sixth uses those IDs to
index the resource limit arrays.  The seventh moves the definition
of that enumerated type into the platform data files, allowing each
platform to define its own set of resource types.

The eighth and ninth are fairly trivial changes.  One replaces two
"max" symbols having the same value with a single symbol.  And the
other replaces two distinct but otherwise identical structure types
with a single common one.

The 10th is a small preparatory patch for the 11th, passing a
different argument to a function that programs resource values.
The 11th allows the actual number of source and destination resource
groups for a platform to be specified in its configuration data.
That way the number is based on the actual number of groups defined.
This removes the need for a sort of clunky pair of functions that
defined that information previously.

Finally, the last patch just increases the number of resource groups
that can be defined to 8.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

IPA versions 3.0 and 3.1 support up to 8 resource groups.  There is
some interest in supporting these older versions of the hardware, so
update the resource configuration code to program resource limits
for these groups if specified.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The arrays of source and destination resource limits defined in
configuration data are of a fixed size--which is the maximum number
of resource groups supported for any platform.  Most platforms will
use fewer than that many groups.

Add new members to the ipa_rsrc_group_id enumerated type to define
the number of source and destination resource groups are defined for
the platform.  (This type is defined for each platform in its data
file.)

Add a new field to the resource configuration data that indicates
how many of the source and destination resource groups are actually
used for the platform, and initialize it with the count value.  This
allows us to determine the number of groups defined for the platform
without exposing the ipa_rsrc_group_id enumerated type.

As a result, we no longer need ipa_resource_group_src_count()
and ipa_resource_group_dst_count(), because each platform now
defines its supported number of resource groups.  So get rid of
those two functions.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass the resource data pointer to ipa_resource_config_src() and
ipa_resource_config_dst() to be used for configuring resource
limits.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ipa_resource_src and ipa_resource_dst structures are identical
in form, so just replace them with a single structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace IPA_RESOURCE_GROUP_SRC_MAX and IPA_RESOURCE_GROUP_DST_MAX
with a single symbol, IPA_RESOURCE_GROUP_MAX.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most platforms have the same set of source and destination resource
types.  But some older platforms have some additional ones, and it's
possible different resources will be used in the future.

Move the definition of the ipa_resource_type enumerated type so it
is defined for each platform in its configuration data file.  This
permits each to have a distinct set of resources.

Shorten the data files slightly, by putting the min and max limit
values on the same line.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the type field from the ipa_resource_src and ipa_resource_dst
structures, and instead use that value as the index into the arrays
of source and destination resources.

Change ipa_resource_config_src() and ipa_resource_config_dst() so
the resource type is passed in as an argument.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Combine the ipa_resource_type_src and ipa_resource_type_dst
enumerated types into a single enumerated type, ipa_resource_type.

Assign value 0 to the first element for the source and destination
types, so their numeric values are preserved.  Add some additional
commentary where these are defined, stating explicitly that code
assumes the first source and first destination member must have
numeric value 0.

Fix the kerneldoc comments for the ipa_gsi_endpoint_data structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the SDM845 configuration data defines resource limits for
the first two resource groups (for both source and destination
resource types).  The hardware supports additional resource groups,
and we should program the resource limits for those groups as well.

Even the "unused" destination resource group (number 2) should have
non-zero limits programmed in some cases, to ensure correct operation.

Add these missing resource group limit definitions to the SDM845
configuration data.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define a new ipa_resource_group_id enumerated type, whose members
have numeric values that match the resource group number used when
programming the hardware.  Each platform supports a different number
of source and destination resource groups, so define the type
separately for each platform in its configuration data file.

Use these new symbolic values when specifying the resource group an
endpoint is associated with.  And use them to index the limits
arrays for source and destination resources, making it clearer how
these values are used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the number of resource groups supported by the hardware is less
than a certain number, we return early in ipa_resource_config_src()
and ipa_resource_config_dst() (to avoid programming resource limits
for non-existent groups).

Unfortunately, these checks are off by one.  Fix this problem in the
four places it occurs.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Separate the IPA resource-related code into a new source file,
"ipa_resource.c", and matching header file "ipa_resource.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:
====================
net: hns3: add some cleanups

This series includes some cleanups for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

hclge_tm_vport_tc_info_update() is bloated, so split it into
separate functions for readability and maintainability.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hclge_reset_rebuild() is a bit too long. So add a new function
hclge_update_reset_level() to improve readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>