- 09 Feb, 2023 21 commits
-
-
Andrew Halaney authored
Some of the pinctrl groups were invalid for the selected pins. Select the proper qup group to fix these warnings: [ 6.523566] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio135" for function "qup15" [ 6.535042] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio136" for function "qup15" [ 6.597536] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio158" for function "qup15" [ 6.597544] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio159" for function "qup15" [ 6.597991] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio0" for function "qup15" [ 6.597996] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio1" for function "qup15" Fixes: e073899e ("arm64: dts: qcom: sa8540p-ride: add i2c nodes") Reviewed-by:
Shazad Hussain <quic_shazhuss@quicinc.com> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
Brian Masney <bmasney@redhat.com> Signed-off-by:
Andrew Halaney <ahalaney@redhat.com> Signed-off-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130154823.117542-1-ahalaney@redhat.com
-
Abel Vesa authored
The proper name for it is power-management. Currently, with the node name being power-controller, the bindings check fails due to the property #power-domain-cells missing. Fixes: ffc50b2d ("arm64: dts: qcom: Add base SM8550 dtsi") Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by:
-
Krzysztof Kozlowski authored
Fix typo in vdd-l5-l16 supply of qcom,pm8550-rpmh-regulators. Fixes: 71342fb9 ("arm64: dts: qcom: Add base SM8550 MTP dts") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Generic SMMU compatibles are not allowed alone and we expect specific one. Signed-off-by:
-
Krzysztof Kozlowski authored
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by:
-
Amit Pundir authored
Put cont splash memory region under the reserved-memory as confirmed by the downstream code for both Tianma and EBBG variants. Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Caleb Connolly authored
Populate the audio devices found on the OnePlus 6 and 6T using the sdm845-sndcard driver. Both devices have the earpiece and headphone jack connected to the WCD9341 codec. The OnePlus 6 uses the MAX98927 speaker codec which is already supported upstream. The OnePlus 6T uses a currently unsupported TFA9894 codec. Two internal microphones are supported, as well as an external headset mic. Each DAI link is expected to be used for a single device. Alsa UCM2 configs for this setup can be found here, they are not yet upstream and include support for call audio which is missing in this patch https://gitlab.com/sdm845-mainline/alsa-ucm-conf/-/tree/9ed12836b269764c4a853411d38ccb6abb70b383/ucm2/OnePlusCo-developed-by:
Dylan Van Assche <me@dylanvanassche.be> Signed-off-by:
Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Clock for WCD9340 is coming from the SoC and is the same in all users, so move it to common file to reduce the code duplication (which still allows further customizations per board). Signed-off-by:
-
Krzysztof Kozlowski authored
Pin configuration fow WCD9340 is the same in all users, so move it to common file to reduce the code duplication (which still allows further customizations per board). Signed-off-by:
-
Krzysztof Kozlowski authored
Re-organize SDM845 audio codec into separate, audio DTSI which should be included and customized by the SDM845 boards wanting audio. The codec node is anyway not a property of the SoC, but the boards. On all others boards not using audio, keep the Slimbus node disabled as it is empty. Signed-off-by:
-
Krzysztof Kozlowski authored
There is dedicated compatible for Lenovo Yoga C630 sound card (documented in bindings and used by Linux driver), so use it along with a generic sound card fallback. The device is actually fully compatible with the generic one. Signed-off-by:
-
Krzysztof Kozlowski authored
Use generic sound card fallback compatible, because the device is actually fully compatible with the generic one. Signed-off-by:
-
Krzysztof Kozlowski authored
Use generic sound card fallback compatible, because the device is actually fully compatible with the generic one. Signed-off-by:
-
- 08 Feb, 2023 18 commits
-
-
Konrad Dybcio authored
They are not used on all boards, so disable them by default. Enable them back on MTP/RB5, which were the only current users. Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The serial/UART device node does not have children with unit addresses, so address/size cells are not correct. Fixes: 377972ac ("arm64: dts: qcom: sm8550: add I2C Master Hub nodes") Signed-off-by:
-
Krzysztof Kozlowski authored
The serial/UART device node does not have children with unit addresses, so address/size cells are not correct. Fixes: f5837418 ("arm64: dts: qcom: sm8450: add uart20 node") Fixes: 5188049c ("arm64: dts: qcom: Add base SM8450 DTSI") Signed-off-by:
-
Krzysztof Kozlowski authored
The serial/UART device node does not have children with unit addresses, so address/size cells are not correct. Fixes: cf03cd7e ("arm64: dts: qcom: sm8350: Set up WRAP0 QUPs") Signed-off-by:
-
Krzysztof Kozlowski authored
Node names should be generic (as Devicetree spec mandates), so use "bluetooth" for BT node. Signed-off-by:
-
Konrad Dybcio authored
Use the correct compatible so that the driver can probe properly. Fixes: a6dd1206 ("arm64: dts: qcom: sm8450: add display hardware devices") Signed-off-by:
-
Robert Marko authored
IPQ8074 has efuses like other Qualcomm SoC-s that are required for determining various HW quirks which will be required later for CPR etc, so lets add the QFPROM node for start. Individidual fuses will be added as they are required. Signed-off-by:
Robert Marko <robimarko@gmail.com> Reviewed-by:
Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by:
-
Johan Hovold authored
The USB-DP PHY resets have been switched. Fixes: 7f7e5c1b ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes") Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
-
Dmitry Baryshkov authored
Add device tree node for the CBF clock. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1. Fixes: 2b8c9c77 ("arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1") Suggested-by:
-
Dmitry Baryshkov authored
Specify interconnects to be used by the UFS host controller. Signed-off-by:
-
Bhupesh Sharma authored
Add watchdog node in Qualcomm sm6115 SoC dtsi. Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The sound card does not expose DAIs and does not use custom qcom properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and 'qcom,msm-mbhc-hphl-swh': sc7280-idp.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+' Reported-by:
Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The sound card does not expose DAIs and does not use custom qcom properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and 'qcom,msm-mbhc-hphl-swh': sc7280-herobrine-crd.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+' Reported-by:
-
Konrad Dybcio authored
SM6115's SMMU uses 36bit VAs, which is a good indicator that we should increase (dma-)ranges - and by extension #address- and #size-cells to prevent things from getting lost in translation (both literally and figuratively). Do so. Signed-off-by:
-
Konrad Dybcio authored
Add a mdss_ prefix to mdss nodes to keep them all near each other when referencing them by label in device DTs. Signed-off-by:
-
Yang Xiwen authored
This commit adds support for the ufi-001C and uf896 WiFi/LTE dongle made by Tong Heng Wei Chuang based on MSM8916. uf896 is another variant for the usb stick. The board design differs by using different gpios for the keys and leds. Note: The original firmware does not support 64-bit OS. It is necessary to flash 64-bit TZ firmware to boot arm64. Currently supported: - All CPU cores - Buttons - LEDs - Modem - SDHC - USB Device Mode - UART Co-developed-by:
Jaime Breva <jbreva@nayarsystems.com> Signed-off-by:
Nikita Travkin <nikita@trvn.ru> Signed-off-by:
Yang Xiwen <forbidden405@foxmail.com> Signed-off-by:
-
Bhupesh Sharma authored
qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart. Add the debug uart node in sm6115 dtsi file. Cc: Bjorn Andersson <andersson@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
- 06 Feb, 2023 1 commit
-
-
Krzysztof Kozlowski authored
Add the ADSP GPR (Generic Packet Router) and LPASS LPI (Low Power Audio SubSystem Low Power Island) pin controller nodes used as part of audio subsystem on SM8550. Signed-off-by:
-
