- 02 May, 2007 40 commits
-
-
Andi Kleen authored
Fix: In file included from include2/asm/apic.h:5, from include2/asm/smp.h:15, from linux/arch/x86_64/kernel/genapic_flat.c:18: linux/include/linux/pm.h: In function ‘call_platform_enable_wakeup’: linux/include/linux/pm.h:331: error: ‘EIO’ undeclared (first use in this function) linux/include/linux/pm.h:331: error: (Each undeclared identifier is reported only once linux/include/linux/pm.h:331: error: for each function it appears in.) Signed-off-by:Andi Kleen <ak@suse.de>
-
Andi Kleen authored
vfat implements compat handlers for these ioctls, but when they were executed on other file systems the kernel would still complain about an unknown compat ioctl. Just declare them as compatible and let them be rejected when not needed by the normal path. This makes wine runs a lot quieter Signed-off-by: -
Andi Kleen authored
Signed-off-by: -
Andi Kleen authored
The option never worked well and functionlist wasn't well maintained. Also it made the build very slow on many binutils version. So just remove it. Cc: arjan@linux.intel.com Signed-off-by: -
Andi Kleen authored
Signed-off-by: -
Andi Kleen authored
access_ok checks this case anyways, no need to check twice. Signed-off-by: -
Andi Kleen authored
- Remove #if that is always set - Fix warning Signed-off-by: -
Andi Kleen authored
This was supposed to see the full memory on a ASUS A8SX motherboard with 4GB RAM where the northbridge reports less memory, but it didn't help there. But it's a reasonable change so let's include it anyways. Signed-off-by: -
Andi Kleen authored
RDTSCP is already synchronous and doesn't need an explicit CPUID. This is a little faster and more importantly avoids VMEXITs on Hypervisors. Original patch from Joerg Roedel, but reworked by AK Also includes miscompilation fix by Eric Biederman Cc: "Joerg Roedel" <joerg.roedel@amd.com> Signed-off-by: -
Andi Kleen authored
Following x86-64 Signed-off-by: -
Andi Kleen authored
Syncs up with x86-64. Signed-off-by: -
Andi Kleen authored
Ported from x86-64. Signed-off-by: -
Andi Kleen authored
Redefine cpu_has() to evaluate cpu features already checked in early boot at compile time. This way the compiler might eliminate some dead code. Signed-off-by: -
Andi Kleen authored
Check some CPUID bits that are needed for compiler generated early in boot. When the system is still in real mode before changing the VESA BIOS mode it is possible to still display an visible error message on the screen. Similar to x86-64. Includes cleanups from Eric Biederman Signed-off-by: -
Andi Kleen authored
Needed for followon patch Signed-off-by: -
Andi Kleen authored
Follows i386 and useful cleanup. Signed-off-by: -
Andi Kleen authored
Dead to magic numbers! Generated code is the same. Signed-off-by: -
David P. Reed authored
- Use 64bit TSC calculations to avoid handling overflow - Use 32bit unsigned arithmetic for the APIC timer. This way overflows are handled correctly. - Fix exit check of loop to account for apic timer counting down Signed-off-by: dpreed@reed.com Signed-off-by: -
Andi Kleen authored
The kernel doesn't implement it, but some programs like java use it anyways. Shut the code up. Signed-off-by: -
Andi Kleen authored
Define a new IGNORE_IOCTL() to let a compat ioctl not be warned about even when it is not implemented. This is the same as COMPATIBLE_IOCTL internally, but better self documentng. Valid reasons to use this: - It is implemented with ->compat_ioctl on some device, but programs call it on others too. - The ioctl is not implemented in the native kernel, but programs call it commonly anyways. Most other reasons are not valid. Signed-off-by: -
Andi Kleen authored
This mainly removes a lot of code, replacing it with calls into the new 32bit perfctr-watchdog.c Signed-off-by: -
Andi Kleen authored
- Introduce a wd_ops structure - Convert the various nmi watchdogs over to it - This allows to split the perfctr reservation from the watchdog setup cleanly. - Do perfctr reservation globally as it should have always been - Remove dead code referenced only by unused EXPORT_SYMBOLs Signed-off-by: -
Suresh Siddha authored
Set the node_possible_map at runtime on x86_64. On a non NUMA system, num_possible_nodes() will now say '1'. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
-
Tim Hockin authored
Background: We've found that MCEs (specifically DRAM SBEs) tend to come in bunches, especially when we are trying really hard to stress the system out. The current MCE poller uses a static interval which does not care whether it has or has not found MCEs recently. Description: This patch makes the MCE poller adjust the polling interval dynamically. If we find an MCE, poll 2x faster (down to 10 ms). When we stop finding MCEs, poll 2x slower (up to check_interval seconds). The check_interval tunable becomes the max polling interval. The "Machine check events logged" printk() is rate limited to the check_interval, which should be identical behavior to the old functionality. Result: If you start to take a lot of correctable errors (not exceptions), you log them faster and more accurately (less chance of overflowing the MCA registers). If you don't take a lot of errors, you will see no change. Alternatives: I considered simply reducing the polling interval to 10 ms immediately and keeping it there as long as we continue to find errors. This felt a bit heavy handed, but does perform significantly better for the default check_interval of 5 minutes (we're using a few seconds when testing for DRAM errors). I could be convinced to go with this, if anyone felt it was not too aggressive. Testing: I used an error-injecting DIMM to create lots of correctable DRAM errors and verified that the polling interval accelerates. The printk() only happens once per check_interval seconds. Patch: This patch is against 2.6.21-rc7. Signed-Off-By:
Tim Hockin <thockin@google.com> Signed-off-by:
-
Gerd Hoffmann authored
Avoid trying to set up vgacon if there's no vga hardware present. Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Andi Kleen authored
`ret_from_sys_call' label no longer exist and `syscall_exit' label was introduced instead. Signed-off-by:
Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by:
-
Andrew Morton authored
WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:cpu_llc_id from __ksymtab between '__ksymtab_cpu_llc_id' (at offset 0x4a0) and '__ksymtab_smp_num_siblings' It is strange to export a __cpuinitdata symbols to modules, and no module appears to use it anyway. Cc: Andi Kleen <ak@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Eric W. Biederman authored
This patch just trivial converts from calling kernel_thread and daemonize to just calling kthread_run. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Zachary Amsden authored
Add comment and condense code to make use of native_local_ptep_get_and_clear function. Also, it turns out the 2-level and 3-level paging definitions were identical, so move the common definition into pgtable.h Signed-off-by:
Zachary Amsden <zach@vmware.com> Signed-off-by:
-
Zachary Amsden authored
In situations where page table updates need only be made locally, and there is no cross-processor A/D bit races involved, we need not use the heavyweight xchg instruction to atomically fetch and clear page table entries. Instead, we can just read and clear them directly. This introduces a neat optimization for non-SMP kernels; drop the atomic xchg operations from page table updates. Thanks to Michel Lespinasse for noting this potential optimization. Signed-off-by:
-
Zachary Amsden authored
When exiting from an address space, no special hypervisor notification of page table updates needs to occur; direct page table hypervisors, such as Xen, switch to another address space first (init_mm) and unprotects the page tables to avoid the cost of trapping to the hypervisor for each pte_clear. Shadow mode hypervisors, such as VMI and lhype don't need to do the extra work of calling through paravirt-ops, and can just directly clear the page table entries without notifiying the hypervisor, since all the page tables are about to be freed. So introduce native_pte_clear functions which bypass any paravirt-ops notification. This results in a significant performance win for VMI and removes some indirect calls from zap_pte_range. Note the 3-level paging already had a native_pte_clear function, thus demanding argument conformance and extra args for the 2-level definition. Signed-off-by:
-
Daniel Walker authored
The locking of the xtime_lock around the cpu notifier is unessesary now. At one time the tsc was used after a frequency change for timekeeping, but the re-write of timekeeping no longer uses the TSC unless the frequency is constant. The variables that are changed in this section of code had also once been used for timekeeping, but not any longer .. Signed-off-by:
Daniel Walker <dwalker@mvista.com> Signed-off-by:
-
Siddha, Suresh B authored
Set use_alien_caches to 0 on non NUMA platforms. And avoid calling the cache_free_alien() when use_alien_caches is not set. This will avoid the cache miss that happens while dereferencing slabp to get nodeid. Signed-off-by:
-
Andi Kleen authored
No need to maintain it anymore Signed-off-by: -
Joachim Deguara authored
Currently the i386 architecture checks the family for mce capability and this removes that and uses the CPUID information. Tested on a K8 revE and a family10h processor. This eliminates checking of a set AMD procesor family if mce is allowed and relies on the information being in CPUID. Signed-off-by:
Joachim Deguara <joachim.deguara@amd.com> Signed-off-by:
-
Keshavamurthy, Anil S authored
Cleanup flush_tlb_others(), no functional change. Signed-off-by:
Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by:
-
Hisashi Hifumi authored
IRQ is already disabled through local_irq_disable(). So spin_lock_irqsave() can be replaced with spin_lock(). Signed-off-by:
Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by:
-
Keshavamurthy, Anil S authored
Avoid checking for cpu gone in mm hot path when CONFIG_HOTPLUG_CPU is not defined. Signed-off-by:
-
Eric Dumazet authored
We apparently hit the 1024 limit of vsyscall_0 zone when some debugging options are set, or if __vsyscall_gtod_data is 64 bytes larger. In order to save 128 bytes from the vsyscall_0 zone, we move __vgetcpu_mode & __jiffies to vsyscall_2 zone where they really belong, since they are used only from vgetcpu() (which is in this vsyscall_2 area). After patch is applied, new layout is : ffffffffff600000 T vgettimeofday ffffffffff60004e t vsysc2 ffffffffff600140 t vread_hpet ffffffffff600150 t vread_tsc ffffffffff600180 D __vsyscall_gtod_data ffffffffff600400 T vtime ffffffffff600413 t vsysc1 ffffffffff600800 T vgetcpu ffffffffff600870 D __vgetcpu_mode ffffffffff600880 D __jiffies ffffffffff600c00 T venosys_1 Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
startup_ipi_hook depends on CONFIG_X86_LOCAL_APIC, so move it to the right part of the paravirt_ops initialization. Signed-off-by:
-
