Currently proc_dobool expects a (bool *) in table->data, but sizeof(int)
in table->maxsize, because it uses do_proc_dointvec() directly.

This is unsafe for at least two reasons:
1. A sysctl table definition may use { .data = &variable, .maxsize =
   sizeof(variable) }, not realizing that this makes the sysctl unusable
   (see the Fixes: tag) and that they need to use the completely
   counterintuitive sizeof(int) instead.
2. proc_dobool() will currently try to parse an array of values if given
   .maxsize >= 2*sizeof(int), but will try to write values of type bool
   by offsets of sizeof(int), so it will not work correctly with neither
   an (int *) nor a (bool *). There is no .maxsize validation to prevent
   this.

Fix this by:
1. Constraining proc_dobool() to allow only one value and .maxsize ==
   sizeof(bool).
2. Wrapping the original struct ctl_table in a temporary one with .data
   pointing to a local int variable and .maxsize set to sizeof(int) and
   passing this one to proc_dointvec(), converting the value to/from
   bool as needed (using proc_dou8vec_minmax() as an example).
3. Extending sysctl_check_table() to enforce proc_dobool() expectations.
4. Fixing the proc_dobool() docstring (it was just copy-pasted from
   proc_douintvec, apparently...).
5. Converting all existing proc_dobool() users to set .maxsize to
   sizeof(bool) instead of sizeof(int).

Fixes: 83efeeeb ("tty: Allow TIOCSTI to be disabled")
Fixes: a2071573 ("sysctl: introduce new proc handler proc_dobool")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Pull thermal control updates from Rafael Wysocki:
 "The majority of changes here are related to the general switch-over to
  using arrays of generic trip point structures registered along with a
  thermal zone instead of trip point callbacks (this has been done
  mostly by Daniel Lezcano with some help from yours truly on the Intel
  drivers front).

  Apart from that and the related reorganization of code, there are some
  enhancements of the existing driver and a new Mediatek Low Voltage
  Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major
  rework so it will use the generic idle_inject facility for CPU idle
  time injection going forward and it will take additional module
  parameters for specifying the subset of CPUs to be affected by it
  (work done by Srinivas Pandruvada).

  Also included are assorted fixes and a whole bunch of cleanups.

  Specifics:

   - Rework a large bunch of drivers to use the generic thermal trip
     structure and use the opportunity to do more cleanups by removing
     unused functions from the OF code (Daniel Lezcano)

   - Remove core header inclusion from drivers (Daniel Lezcano)

   - Fix some locking issues related to the generic thermal trip rework
     (Johan Hovold)

   - Fix a crash when requesting the critical temperature on tegra,
     which is related to the generic trip point work (Jon Hunter)

   - Clean up thermal device unregistration code (Viresh Kumar)

   - Fix and clean up thermal control core initialization error code
     paths (Daniel Lezcano)

   - Relocate the trip points handling code into a separate file (Daniel
     Lezcano)

   - Make the thermal core fail registration of thermal zones and
     cooling devices if the thermal class has not been registered
     (Rafael Wysocki)

   - Add trip point initialization helper functions for ACPI-defined
     trip points and modify two thermal drivers to use them (Rafael
     Wysocki, Daniel Lezcano)

   - Make the core thermal control code use sysfs_emit_at() instead of
     scnprintf() where applicable (ye xingchen)

   - Consolidate code accessing the Intel TCC (Thermal Control
     Circuitry) MSRs by introducing library functions for that and
     making the TCC-related code in thermal drivers use them (Zhang Rui)

   - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
     changes (Zhang Rui)

   - Address an "unsigned expression compared with zero" warning in the
     intel_soc_dts_iosf thermal driver (Yang Li)

   - Update comments regarding two functions in the Intel Menlow thermal
     driver (Deming Wang)

   - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
     driver (ye xingchen)

   - Make the intel_pch thermal driver support the Wellsburg PCH (Tim
     Zimmermann)

   - Modify the intel_pch and processor_thermal_device_pci thermal
     drivers use generic trip point tables instead of thermal zone trip
     point callbacks (Daniel Lezcano)

   - Add production mode attribute sysfs attribute to the int340x
     thermal driver (Srinivas Pandruvada)

   - Rework dynamic trip point updates handling and locking in the
     int340x thermal driver (Rafael Wysocki)

   - Make the int340x thermal driver use a generic trip points table
     instead of thermal zone trip point callbacks (Rafael Wysocki,
     Daniel Lezcano)

   - Clean up and improve the int340x thermal driver (Rafael Wysocki)

   - Simplify and clean up the intel_pch thermal driver (Rafael Wysocki)

   - Fix the Intel powerclamp thermal driver and make it use the common
     idle injection framework (Srinivas Pandruvada)

   - Add two module parameters, cpumask and max_idle, to the Intel
     powerclamp thermal driver to allow it to affect only a specific
     subset of CPUs instead of all of them (Srinivas Pandruvada)

   - Make the Intel quark_dts thermal driver Use generic trip point
     objects instead of its own trip point representation (Daniel
     Lezcano)

   - Add toctree entry for thermal documents and fix two issues in the
     Intel powerclamp driver documentation (Bagas Sanjaya)

   - Use strscpy() to instead of strncpy() in the thermal core (Xu
     Panda)

   - Fix thermal_sampling_exit() (Vincent Guittot)

   - Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam
     Chihi)

   - Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
     Uytterhoeven)

   - Fix useless call to set_trips() when resuming in the rcar_gen3
     thermal control driver and add interrupt support detection at init
     time to it (Niklas Söderlund)

   - Fix memory corruption in the hi3660 thermal driver (Yongqin Liu)

   - Fix include path for libnl3 in pkg-config file for libthermal
     (Vibhav Pant)

   - Remove syscfg-based driver for st as the platform is not supported
     any more (Alain Volmat)"

* tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits)
  thermal/drivers/st: Remove syscfg based driver
  thermal: Remove core header inclusion from drivers
  tools/lib/thermal: Fix include path for libnl3 in pkg-config file.
  thermal/drivers/hisi: Drop second sensor hi3660
  thermal/drivers/rcar_gen3_thermal: Fix device initialization
  thermal/drivers/rcar_gen3_thermal: Create device local ops struct
  thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming
  thermal/drivers/rcar_gen3: Add support for R-Car V4H
  dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support
  thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver
  dt-bindings: thermal: mediatek: Add LVTS thermal controllers
  thermal/drivers/mediatek: Relocate driver to mediatek folder
  tools/lib/thermal: Fix thermal_sampling_exit()
  Documentation: powerclamp: Fix numbered lists formatting
  Documentation: powerclamp: Escape wildcard in cpumask description
  Documentation: admin-guide: Add toctree entry for thermal docs
  thermal: intel: powerclamp: Add two module parameters
  Documentation: admin-guide: Move intel_powerclamp documentation
  thermal: core: Use sysfs_emit_at() instead of scnprintf()
  thermal: intel: powerclamp: Fix duration module parameter
  ...

Pull ACPI updates from Rafael Wysocki:
 "These fix a frequency limit issue in the ACPI processor performance
  library code, fix a few issues in the ACPICA code, improve Crystal
  Cove support in the ACPI PMIC driver, fix string handling in the ACPI
  battery driver, add IRQ override quirks for a few machines more, fix
  other assorted problems and clean up code and documentation.

  Specifics:

   - Drop port I/O validation for some regions to avoid AML failures due
     to rejections of legitimate port I/O writes (Mario Limonciello)

   - Constify acpi_get_handle() pathname argument to allow its callers
     to pass const pathnames to it (Sakari Ailus)

   - Prevent acpi_ns_simple_repair() from crashing in some cases when
     AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin)

   - Fix typo in CDAT DSMAS struct definition (Lukas Wunner)

   - Drop an unnecessary (void *) conversion from the ACPI processor
     driver (Zhou jie)

   - Modify the ACPI processor performance library code to use the "no
     limit" frequency QoS as appropriate and adjust the intel_pstate
     driver accordingly (Rafael Wysocki)

   - Add support for NBFT to the ACPI table parser (Stuart Hayes)

   - Introduce list of known non-PNP devices to avoid enumerating some
     of them as PNP devices (Rafael Wysocki)

   - Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow
     scripts to report the actual maintainers information (Rafael
     Wysocki)

   - Add two more entries to the ACPI IRQ override quirk list (Adam
     Niederer, Werner Sembach)

   - Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
     allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
     the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede)

   - Add comments with DSDT power OpRegion field names to the ACPI PMIC
     driver (Hans de Goede)

   - Fix string termination handling in the ACPI battery driver (Armin
     Wolf)

   - Limit error type to 32-bit width in the ACPI APEI error injection
     code (Shuai Xue)

   - Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver
     (Hans de Goede)

   - Silence missing prototype warnings in some places in the
     ACPI-related code (Ammar Faizi)

   - Make kobj_type structures used in the ACPI code constant (Thomas
     Weißschuh)

   - Correct spelling in firmware-guide/ACPI (Randy Dunlap)

   - Clarify the meaning of Explicit and Implicit in the _DSD GPIO
     properties documentation (Andy Shevchenko)

   - Fix some kernel-doc comments in the ACPI CPPC library code (Yang
     Li)"

* tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
  ACPI: make kobj_type structures constant
  Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
  ACPICA: Fix typo in CDAT DSMAS struct definition
  ACPI: resource: Do IRQ override on all TongFang GMxRGxx
  ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
  ACPI: CPPC: Fix some kernel-doc comments
  ACPI: video: Fix Lenovo Ideapad Z570 DMI match
  Documentation: firmware-guide/ACPI: correct spelling
  ACPI: PMIC: Add comments with DSDT power opregion field names
  ACPI: battery: Increase maximum string length
  ACPI: battery: Fix buffer overread if not NUL-terminated
  ACPI: APEI: EINJ: Limit error type to 32-bit width
  MAINTAINERS: Add x86 ACPI paths to the ACPI entry
  ACPI: battery: Fix missing NUL-termination with large strings
  ACPI: PNP: Introduce list of known non-PNP devices
  ACPICA: nsrepair: handle cases without a return value correctly
  ACPI: Silence missing prototype warnings
  cpufreq: intel_pstate: Drop ACPI _PSS states table patching
  ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
  ACPI: processor: perflib: Use the "no limit" frequency QoS
  ...

Pull power management updates from Rafael Wysocki:
 "These add EPP support to the AMD P-state cpufreq driver, add support
  for new platforms to the Intel RAPL power capping driver, intel_idle
  and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
  drop the custom cpufreq driver for loongson1 that is not necessary any
  more (and the corresponding cpufreq platform device), fix assorted
  issues and clean up code.

  Specifics:

   - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
     Karny, Arnd Bergmann, Bagas Sanjaya)

   - Drop the custom cpufreq driver for loongson1 that is not necessary
     any more and the corresponding cpufreq platform device (Keguang
     Zhang)

   - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
     entries (Paul E. McKenney)

   - Enable thermal cooling for Tegra194 (Yi-Wei Wang)

   - Register module device table and add missing compatibles for
     cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)

   - Various dt binding updates for qcom-cpufreq-nvmem and
     opp-v2-kryo-cpu (Christian Marangi)

   - Make kobj_type structure in the cpufreq core constant (Thomas
     Weißschuh)

   - Make cpufreq_unregister_driver() return void (Uwe Kleine-König)

   - Make the TEO cpuidle governor check CPU utilization in order to
     refine idle state selection (Kajetan Puchalski)

   - Make Kconfig select the haltpoll cpuidle governor when the haltpoll
     cpuidle driver is selected and replace a default_idle() call in
     that driver with arch_cpu_idle() to allow MWAIT to be used (Li
     RongQing)

   - Add Emerald Rapids Xeon support to the intel_idle driver (Artem
     Bityutskiy)

   - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
     avoid randconfig build failures (Arnd Bergmann)

   - Make kobj_type structures used in the cpuidle sysfs interface
     constant (Thomas Weißschuh)

   - Make the cpuidle driver registration code update microsecond values
     of idle state parameters in accordance with their nanosecond values
     if they are provided (Rafael Wysocki)

   - Make the PSCI cpuidle driver prevent topology CPUs from being
     suspended on PREEMPT_RT (Krzysztof Kozlowski)

   - Document that pm_runtime_force_suspend() cannot be used with
     DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)

   - Add EXPORT macros for exporting PM functions from drivers (Richard
     Fitzgerald)

   - Remove /** from non-kernel-doc comments in hibernation code (Randy
     Dunlap)

   - Fix possible name leak in powercap_register_zone() (Yang Yingliang)

   - Add Meteor Lake and Emerald Rapids support to the intel_rapl power
     capping driver (Zhang Rui)

   - Modify the idle_inject power capping facility to support 100% idle
     injection (Srinivas Pandruvada)

   - Fix large time windows handling in the intel_rapl power capping
     driver (Zhang Rui)

   - Fix memory leaks with using debugfs_lookup() in the generic PM
     domains and Energy Model code (Greg Kroah-Hartman)

   - Add missing 'cache-unified' property in the example for kryo OPP
     bindings (Rob Herring)

   - Fix error checking in opp_migrate_dentry() (Qi Zheng)

   - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
     Dybcio)

   - Modify some power management utilities to use the canonical ftrace
     path (Ross Zwisler)

   - Correct spelling problems for Documentation/power/ as reported by
     codespell (Randy Dunlap)"

* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  Documentation: amd-pstate: disambiguate user space sections
  cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
  dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
  PM: Add EXPORT macros for exporting PM functions
  cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
  MIPS: loongson32: Drop obsolete cpufreq platform device
  powercap: intel_rapl: Fix handling for large time window
  cpuidle: driver: Update microsecond values of state parameters as needed
  cpuidle: sysfs: make kobj_type structures constant
  cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
  PM: EM: fix memory leak with using debugfs_lookup()
  PM: domains: fix memory leak with using debugfs_lookup()
  cpufreq: Make kobj_type structure constant
  cpufreq: davinci: Fix clk use after free
  cpufreq: amd-pstate: avoid uninitialized variable use
  cpufreq: Make cpufreq_unregister_driver() return void
  OPP: fix error checking in opp_migrate_dentry()
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
  ...

Pull hardening updates from Kees Cook:
 "Beyond some specific LoadPin, UBSAN, and fortify features, there are
  other fixes scattered around in various subsystems where maintainers
  were okay with me carrying them in my tree or were non-responsive but
  the patches were reviewed by others:

   - Replace 0-length and 1-element arrays with flexible arrays in
     various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
     Cook)

   - randstruct: Disable Clang 15 support (Eric Biggers)

   - GCC plugins: Drop -std=gnu++11 flag (Sam James)

   - strpbrk(): Refactor to use strchr() (Andy Shevchenko)

   - LoadPin LSM: Allow root filesystem switching when non-enforcing

   - fortify: Use dynamic object size hints when available

   - ext4: Fix CFI function prototype mismatch

   - Nouveau: Fix DP buffer size arguments

   - hisilicon: Wipe entire crypto DMA pool on error

   - coda: Fully allocate sig_inputArgs

   - UBSAN: Improve arm64 trap code reporting

   - copy_struct_from_user(): Add minimum bounds check on kernel buffer
     size"

* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  randstruct: disable Clang 15 support
  uaccess: Add minimum bounds check on kernel buffer size
  arm64: Support Clang UBSAN trap codes for better reporting
  coda: Avoid partial allocation of sig_inputArgs
  gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
  lib/string: Use strchr() in strpbrk()
  crypto: hisilicon: Wipe entire pool on error
  net/i40e: Replace 0-length array with flexible array
  io_uring: Replace 0-length array with flexible array
  ext4: Fix function prototype mismatch for ext4_feat_ktype
  i915/gvt: Replace one-element array with flexible-array member
  drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
  LoadPin: Allow filesystem switch when not enforcing
  LoadPin: Move pin reporting cleanly out of locking
  LoadPin: Refactor sysctl initialization
  LoadPin: Refactor read-only check into a helper
  ARM: ixp4xx: Replace 0-length arrays with flexible arrays
  fortify: Use __builtin_dynamic_object_size() when available
  rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper

Pull seccomp update from Kees Cook:

 - Fix kernel-doc function name ordering to avoid warning (Randy Dunlap)

* tag 'seccomp-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: fix kernel-doc function name warning

Pull RCU updates from Paul McKenney:

 - Documentation updates

 - Miscellaneous fixes, perhaps most notably:

      - Throttling callback invocation based on the number of callbacks
        that are now ready to invoke instead of on the total number of
        callbacks

      - Several patches that suppress false-positive boot-time
        diagnostics, for example, due to lockdep not yet being
        initialized

      - Make expedited RCU CPU stall warnings dump stacks of any tasks
        that are blocking the stalled grace period. (Normal RCU CPU
        stall warnings have done this for many years)

      - Lazy-callback fixes to avoid delays during boot, suspend, and
        resume. (Note that lazy callbacks must be explicitly enabled, so
        this should not (yet) affect production use cases)

 - Make kfree_rcu() and friends take advantage of polled grace periods,
   thus reducing memory footprint by almost two orders of magnitude,
   admittedly on a microbenchmark

   This also begins the transition from kfree_rcu(p) to
   kfree_rcu_mightsleep(p). This transition was motivated by bugs where
   kfree_rcu(p), which can block, was typed instead of the intended
   kfree_rcu(p, rh)

 - SRCU updates, perhaps most notably fixing a bug that causes SRCU to
   fail when booted on a system with a non-zero boot CPU. This
   surprising situation actually happens for kdump kernels on the
   powerpc architecture

   This also adds an srcu_down_read() and srcu_up_read(), which act like
   srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side
   critical section to be handed off from one task to another

 - Clean up the now-useless SRCU Kconfig option

   There are a few more commits that are not yet acked or pulled into
   maintainer trees, and these will be in a pull request for a later
   merge window

 - RCU-tasks updates, perhaps most notably these fixes:

      - A strange interaction between PID-namespace unshare and the
        RCU-tasks grace period that results in a low-probability but
        very real hang

      - A race between an RCU tasks rude grace period on a single-CPU
        system and CPU-hotplug addition of the second CPU that can
        result in a too-short grace period

      - A race between shrinking RCU tasks down to a single callback
        list and queuing a new callback to some other CPU, but where
        that queuing is delayed for more than an RCU grace period. This
        can result in that callback being stranded on the non-boot CPU

 - Torture-test updates and fixes

 - Torture-test scripting updates and fixes

 - Provide additional RCU CPU stall-warning information in kernels built
   with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute
   timeout limit for expedited RCU CPU stall warnings

* tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
  rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
  kernel/notifier: Remove CONFIG_SRCU
  init: Remove "select SRCU"
  fs/quota: Remove "select SRCU"
  fs/notify: Remove "select SRCU"
  fs/btrfs: Remove "select SRCU"
  fs: Remove CONFIG_SRCU
  drivers/pci/controller: Remove "select SRCU"
  drivers/net: Remove "select SRCU"
  drivers/md: Remove "select SRCU"
  drivers/hwtracing/stm: Remove "select SRCU"
  drivers/dax: Remove "select SRCU"
  drivers/base: Remove CONFIG_SRCU
  rcu: Disable laziness if lazy-tracking says so
  rcu: Track laziness during boot and suspend
  rcu: Remove redundant call to rcu_boost_kthread_setaffinity()
  rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts
  rcu: Align the output of RCU CPU stall warning messages
  rcu: Add RCU stall diagnosis information
  sched: Add helper nr_context_switches_cpu()
  ...

Pull cgroup updates from Tejun Heo:
 "All the changes are trivial: documentation updates and a trivial code
  cleanup"

* tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: fix a few kernel-doc warnings & coding style
  docs: cgroup-v1: use numbered lists for user interface setup
  docs: cgroup-v1: add internal cross-references
  docs: cgroup-v1: make swap extension subsections subsections
  docs: cgroup-v1: use bullet lists for list of stat file tables
  docs: cgroup-v1: move hierarchy of accounting caption
  docs: cgroup-v1: fix footnotes
  docs: cgroup-v1: use code block for locking order schema
  docs: cgroup-v1: wrap remaining admonitions in admonition blocks
  docs: cgroup-v1: replace custom note constructs with appropriate admonition blocks
  cgroup/cpuset: no need to explicitly init a global static variable

Pull workqueue updates from Tejun Heo:

 - When per-cpu workqueue workers expire after sitting idle for too
   long, they used to wake up to the CPU that they're bound to in order
   to exit. This unfortunately could cause unwanted disturbances on CPUs
   isolated for e.g. RT applications.

   The worker exit path is restructured so that an existing worker is
   unbound from its CPU before being woken up for the last time,
   allowing it to migrate away from an isolated CPU for exiting.

 - A couple debug improvements. Watchdog dump is made more compact and
   workqueue now warns if used-after-free during the RCU grace period
   after destroy_workqueue().

* tag 'wq-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fold rebind_worker() within rebind_workers()
  workqueue: Unbind kworkers before sending them to exit()
  workqueue: Don't hold any lock while rcuwait'ing for !POOL_MANAGER_ACTIVE
  workqueue: Convert the idle_timer to a timer + work_struct
  workqueue: Factorize unbind/rebind_workers() logic
  workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex
  workqueue: Make show_pwq() use run-length encoding
  workqueue: Add a new flag to spot the potential UAF error

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Core:

   - Move the interrupt affinity spreading mechanism into lib/group_cpus
     so it can be used for similar spreading requirements, e.g. in the
     block multi-queue code

     This also contains a first usecase in the block multi-queue code
     which Jens asked to take along with the librarization

   - Improve irqdomain locking to close a number race conditions which
     can be observed with massive parallel device driver probing

   - Enforce and document the semantics of disable_irq() which cannot be
     invoked safely from non-sleepable context

   - Move the IPI multiplexing code from the Apple AIC driver into the
     core, so it can be reused by RISCV

  Drivers:

   - Plug OF node refcounting leaks in various drivers

   - Correctly mark level triggered interrupts in the Broadcom L2
     drivers

   - The usual small fixes and improvements

   - No new drivers for the record!"

* tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
  irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
  irqdomain: Switch to per-domain locking
  irqchip/mvebu-odmi: Use irq_domain_create_hierarchy()
  irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy()
  irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy()
  irqchip/gic-v3-its: Use irq_domain_create_hierarchy()
  irqchip/gic-v2m: Use irq_domain_create_hierarchy()
  irqchip/alpine-msi: Use irq_domain_add_hierarchy()
  x86/uv: Use irq_domain_create_hierarchy()
  x86/ioapic: Use irq_domain_create_hierarchy()
  irqdomain: Clean up irq_domain_push/pop_irq()
  irqdomain: Drop leftover brackets
  irqdomain: Drop dead domain-name assignment
  irqdomain: Drop revmap mutex
  irqdomain: Fix domain registration race
  irqdomain: Fix mapping-creation race
  irqdomain: Refactor __irq_domain_alloc_irqs()
  irqdomain: Look for existing mapping only once
  irqdomain: Drop bogus fwspec-mapping error handling
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for timekeeping, timers and clockevent/source drivers:

  Core:

   - Yet another round of improvements to make the clocksource watchdog
     more robust:

       - Relax the clocksource-watchdog skew criteria to match the NTP
         criteria.

       - Temporarily skip the watchdog when high memory latencies are
         detected which can lead to false-positives.

       - Provide an option to enable TSC skew detection even on systems
         where TSC is marked as reliable.

     Sigh!

   - Initialize the restart block in the nanosleep syscalls to be
     directed to the no restart function instead of doing a partial
     setup on entry.

     This prevents an erroneous restart_syscall() invocation from
     corrupting user space data. While such a situation is clearly a
     user space bug, preventing this is a correctness issue and caters
     to the least suprise principle.

   - Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
     to align it with the nanosleep semantics.

  Drivers:

   - The obligatory new driver bindings for Mediatek, Rockchip and
     RISC-V variants.

   - Add support for the C3STOP misfeature to the RISC-V timer to handle
     the case where the timer stops in deeper idle state.

   - Set up a static key in the RISC-V timer correctly before first use.

   - The usual small improvements and fixes all over the place"

* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
  clocksource/drivers/em_sti: Mark driver as non-removable
  clocksource/drivers/sh_tmu: Mark driver as non-removable
  clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
  clocksource/drivers/timer-microchip-pit64b: Add delay timer
  clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
  dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
  dt-bindings: timer: mediatek,mtk-timer: add MT8365
  clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
  clocksource/drivers/sh_cmt: Mark driver as non-removable
  clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
  clocksource/drivers/riscv: Increase the clock source rating
  clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
  dt-bindings: timer: Add bindings for the RISC-V timer device
  RISC-V: time: initialize hrtimer based broadcast clock event device
  dt-bindings: timer: rk-timer: Add rktimer for rv1126
  time/debug: Fix memory leak with using debugfs_lookup()
  clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
  posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
  clocksource: Verify HPET and PMTMR when TSC unverified
  ...

Pull miscellaneous x86 cleanups from Thomas Gleixner:

 - Correct the common copy and pasted mishandling of kstrtobool() in the
   strict_sas_size() setup function

 - Make recalibrate_cpu_khz() an GPL only export

 - Check TSC feature before doing anything else which avoids pointless
   code execution if TSC is not available

 - Remove or fixup stale and misleading comments

 - Remove unused or pointelessly duplicated variables

 - Spelling and typo fixes

* tag 'x86-cleanups-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hotplug: Remove incorrect comment about mwait_play_dead()
  x86/tsc: Do feature check as the very first thing
  x86/tsc: Make recalibrate_cpu_khz() export GPL only
  x86/cacheinfo: Remove unused trace variable
  x86/Kconfig: Fix spellos & punctuation
  x86/signal: Fix the value returned by strict_sas_size()
  x86/cpu: Remove misleading comment
  x86/setup: Move duplicate boot_cpu_data definition out of the ifdeffery
  x86/boot/e820: Fix typo in e820.c comment

Pull x86 vdso updates from Borislav Petkov:

 - Add getcpu support for the 32-bit version of the vDSO

 - Some smaller fixes

* tag 'x86_vdso_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Fix -Wmissing-prototypes warnings
  x86/vdso: Fake 32bit VDSO build on 64bit compile for vgetcpu
  selftests: Emit a warning if getcpu() is missing on 32bit
  x86/vdso: Provide getcpu for x86-32.
  x86/cpu: Provide the full setup for getcpu() on x86-32
  x86/vdso: Move VDSO image init to vdso2c generated code

Pull x86 microcode loader updates from Borislav Petkov:

 - Fix mixed steppings support on AMD which got broken somewhere along
   the way

 - Improve revision reporting

 - Properly check CPUID capabilities after late microcode upgrade to
   avoid false positives

 - A garden variety of other small fixes

* tag 'x86_microcode_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/core: Return an error only when necessary
  x86/microcode/AMD: Fix mixed steppings support
  x86/microcode/AMD: Add a @cpu parameter to the reloading functions
  x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter
  x86/microcode: Allow only "1" as a late reload trigger value
  x86/microcode/intel: Print old and new revision during early boot
  x86/microcode/intel: Pass the microcode revision to print_ucode_info() directly
  x86/microcode: Adjust late loading result reporting message
  x86/microcode: Check CPU capabilities after late microcode update correctly
  x86/microcode: Add a parameter to microcode_check() to store CPU capabilities
  x86/microcode: Use the DEVICE_ATTR_RO() macro
  x86/microcode/AMD: Handle multiple glued containers properly
  x86/microcode/AMD: Rename a couple of functions

Pull x86 resource control updates from Borislav Petkov:

 - Add support for a new AMD feature called slow memory bandwidth
   allocation. Its goal is to control resource allocation in external
   slow memory which is connected to the machine like for example
   through CXL devices, accelerators etc

* tag 'x86_cache_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Fix a silly -Wunused-but-set-variable warning
  Documentation/x86: Update resctrl.rst for new features
  x86/resctrl: Add interface to write mbm_local_bytes_config
  x86/resctrl: Add interface to write mbm_total_bytes_config
  x86/resctrl: Add interface to read mbm_local_bytes_config
  x86/resctrl: Add interface to read mbm_total_bytes_config
  x86/resctrl: Support monitor configuration
  x86/resctrl: Add __init attribute to rdt_get_mon_l3_config()
  x86/resctrl: Detect and configure Slow Memory Bandwidth Allocation
  x86/resctrl: Include new features in command line options
  x86/cpufeatures: Add Bandwidth Monitoring Event Configuration feature flag
  x86/resctrl: Add a new resource type RDT_RESOURCE_SMBA
  x86/cpufeatures: Add Slow Memory Bandwidth Allocation feature flag
  x86/resctrl: Replace smp_call_function_many() with on_each_cpu_mask()

Pull x86 asm alternatives updates from Borislav Petkov:

 - Teach the static_call patching infrastructure to handle conditional
   tall calls properly which can be static calls too

 - Add proper struct alt_instr.flags which controls different aspects of
   insn patching behavior

* tag 'x86_alternatives_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/static_call: Add support for Jcc tail-calls
  x86/alternatives: Teach text_poke_bp() to patch Jcc.d32 instructions
  x86/alternatives: Introduce int3_emulate_jcc()
  x86/alternatives: Add alt_instr.flags

Pull EDAC updates from Borislav Petkov:

 - Add a driver for the RAS functionality on Xilinx's on chip memory
   controller

 - Add support for decoding errors from the first and second level
   memory on SKL-based hardware

 - Add support for the memory controllers in Intel Granite Rapids and
   Emerald Rapids machines

 - First round of amd64_edac driver simplification and removal of
   unneeded functionality

 - The usual cleanups and fixes

* tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Shut up an -Werror,-Wsometimes-uninitialized clang false positive
  EDAC/amd64: Remove early_channel_count()
  EDAC/amd64: Remove PCI Function 0
  EDAC/amd64: Remove PCI Function 6
  EDAC/amd64: Remove scrub rate control for Family 17h and later
  EDAC/amd64: Don't set up EDAC PCI control on Family 17h+
  EDAC/i10nm: Add driver decoder for Sapphire Rapids server
  EDAC/i10nm: Add Intel Granite Rapids server support
  EDAC/i10nm: Make more configurations CPU model specific
  EDAC/i10nm: Add Intel Emerald Rapids server support
  EDAC/skx_common: Delete duplicated and unreachable code
  EDAC/skx_common: Enable EDAC support for the "near" memory
  EDAC/qcom: Add platform_device_id table for module autoloading
  EDAC/zynqmp: Add EDAC support for Xilinx ZynqMP OCM
  dt-bindings: edac: Add bindings for Xilinx ZynqMP OCM

Pull RAS updates from Borislav Petkov:

 - Add support for reporting more bits of the physical address on error,
   on newer AMD CPUs

 - Mask out bits which don't belong to the address of the error being
   reported

* tag 'ras_core_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Mask out non-address bits from machine check bank
  x86/mce: Add support for Extended Physical Address MCA changes
  x86/mce: Define a function to extract ErrorAddr from MCA_ADDR

Pull x86 platform update from Ingo Molnar:

 - Simplify add_rtc_cmos()

 - Use strscpy() in the mcelog code

* tag 'x86-platform-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/dev-mcelog: use strscpy() to instead of strncpy()
  x86/rtc: Simplify PNP ids check

Pull x86 mm update from Ingo Molnar:
 "Micro-optimize __flush_tlb_all()"

* tag 'x86-mm-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Use cpu_feature_enabled() when checking global pages support

Pull x86 fpu updates from Ingo Molnar:

 - Replace zero-length array in struct xregs_state with flexible-array
   member, to help the enabling of stricter compiler checks.

 - Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads.

* tag 'x86-fpu-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads
  x86/fpu: Replace zero-length array in struct xregs_state with flexible-array member

Pull x86 core updates from Ingo Molnar:

 - Clean up the signal frame layout tests

 - Suppress KMSAN false positive reports in arch_within_stack_frames()

* tag 'x86-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Suppress KMSAN reports in arch_within_stack_frames()
  x86/signal/compat: Move sigaction_compat_abi() to signal_64.c
  x86/signal: Move siginfo field tests

Pull x86 build update from Ingo Molnar:
 "Make the 64-bit defconfig the x86 default for all builds, unless
  x86-32 is requested explicitly"

* tag 'x86-build-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Make 64-bit defconfig the default

Pull x86 boot updates from Ingo Molnar:

 - Robustify/fix calling startup_{32,64}() from the decompressor code,
   and removing x86 quirk from scripts/head-object-list.txt as a result.

 - Do not register processors that cannot be onlined for x2APIC

* tag 'x86-boot-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
  scripts/head-object-list: Remove x86 from the list
  x86/boot: Robustify calling startup_{32,64}() from the decompressor code

Pull x86 asm updates from Ingo Molnar:
 "Header fixes and a DocBook fix"

* tag 'x86-asm-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib: Fix compiler and kernel-doc warnings
  x86/lib: Include <asm/misc.h> to fix a missing prototypes warning at build time

Pull scheduler updates from Ingo Molnar:

 - Improve the scalability of the CFS bandwidth unthrottling logic with
   large number of CPUs.

 - Fix & rework various cpuidle routines, simplify interaction with the
   generic scheduler code. Add __cpuidle methods as noinstr to objtool's
   noinstr detection and fix boatloads of cpuidle bugs & quirks.

 - Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
   previously issued registrations.

 - Limit scheduler slice duration to the sysctl_sched_latency period, to
   improve scheduling granularity with a large number of SCHED_IDLE
   tasks.

 - Debuggability enhancement on sys_exit(): warn about disabled IRQs,
   but also enable them to prevent a cascade of followup problems and
   repeat warnings.

 - Fix the rescheduling logic in prio_changed_dl().

 - Micro-optimize cpufreq and sched-util methods.

 - Micro-optimize ttwu_runnable()

 - Micro-optimize the idle-scanning in update_numa_stats(),
   select_idle_capacity() and steal_cookie_task().

 - Update the RSEQ code & self-tests

 - Constify various scheduler methods

 - Remove unused methods

 - Refine __init tags

 - Documentation updates

 - Misc other cleanups, fixes

* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
  sched/rt: pick_next_rt_entity(): check list_entry
  sched/deadline: Add more reschedule cases to prio_changed_dl()
  sched/fair: sanitize vruntime of entity being placed
  sched/fair: Remove capacity inversion detection
  sched/fair: unlink misfit task from cpu overutilized
  objtool: mem*() are not uaccess safe
  cpuidle: Fix poll_idle() noinstr annotation
  sched/clock: Make local_clock() noinstr
  sched/clock/x86: Mark sched_clock() noinstr
  x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
  x86/atomics: Always inline arch_atomic64*()
  cpuidle: tracing, preempt: Squash _rcuidle tracing
  cpuidle: tracing: Warn about !rcu_is_watching()
  cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
  cpuidle: drivers: firmware: psci: Dont instrument suspend code
  KVM: selftests: Fix build of rseq test
  exit: Detect and fix irq disabled state in oops
  cpuidle, arm64: Fix the ARM64 cpuidle logic
  cpuidle: mvebu: Fix duplicate flags assignment
  sched/fair: Limit sched slice duration
  ...

Pull perf updates from Ingo Molnar:

 - Optimize perf_sample_data layout

 - Prepare sample data handling for BPF integration

 - Update the x86 PMU driver for Intel Meteor Lake

 - Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
   discovery breakage

 - Fix the x86 Zhaoxin PMU driver

 - Cleanups

* tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  perf/x86/intel/uncore: Add Meteor Lake support
  x86/perf/zhaoxin: Add stepping check for ZXC
  perf/x86/intel/ds: Fix the conversion from TSC to perf time
  perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery table
  perf/x86/uncore: Add a quirk for UPI on SPR
  perf/x86/uncore: Ignore broken units in discovery table
  perf/x86/uncore: Fix potential NULL pointer in uncore_get_alias_name
  perf/x86/uncore: Factor out uncore_device_to_die()
  perf/core: Call perf_prepare_sample() before running BPF
  perf/core: Introduce perf_prepare_header()
  perf/core: Do not pass header for sample ID init
  perf/core: Set data->sample_flags in perf_prepare_sample()
  perf/core: Add perf_sample_save_brstack() helper
  perf/core: Add perf_sample_save_raw_data() helper
  perf/core: Add perf_sample_save_callchain() helper
  perf/core: Save the dynamic parts of sample data size
  x86/kprobes: Use switch-case for 0xFF opcodes in prepare_emulation
  perf/core: Change the layout of perf_sample_data
  perf/x86/msr: Add Meteor Lake support
  perf/x86/cstate: Add Meteor Lake support
  ...

Pull locking updates from Ingo Molnar:

 - rwsem micro-optimizations

 - spinlock micro-optimizations

 - cleanups, simplifications

* tag 'locking-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  vduse: Remove include of rwlock.h
  locking/lockdep: Remove lockdep_init_map_crosslock.
  x86/ACPI/boot: Use try_cmpxchg() in __acpi_{acquire,release}_global_lock()
  x86/PAT: Use try_cmpxchg() in set_page_memtype()
  locking/rwsem: Disable preemption in all down_write*() and up_write() code paths
  locking/rwsem: Disable preemption in all down_read*() and up_read() code paths
  locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath
  locking/qspinlock: Micro-optimize pending state waiting for unlock

Pull asm-generic cleanups from Arnd Bergmann:
 "Only three minor changes: a cross-platform series from Mike Rapoport
  to consolidate asm/agp.h between architectures, and a correctness
  change for __generic_cmpxchg_local() from Matt Evans"

* tag 'asm-generic-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  char/agp: introduce asm-generic/agp.h
  char/agp: consolidate {alloc,free}_gatt_pages()
  locking/atomic: cmpxchg: Make __generic_cmpxchg_local compare against zero-extended 'old' value

Pull SoC DT updates from Arnd Bergmann:
 "About a quarter of the changes are for 32-bit arm, mostly filling in
  device support for existing machines and adding minor cleanups, mostly
  for Qualcomm and Samsung based machines.

  Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
  Rockchips that have been around for a while but were lacking kernel
  support so far: RV1126 is a Vision SoC with an NPU and is used in the
  Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
  for TV boxes and so far only comes with a dts for its refernece
  design.

  The other 32-bit boards that were added are two ASpeed AST2600 based
  BMC boards, the Microchip sam9x60_curiosity development board (Armv5
  based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
  for i.MX53 and i.MX6ULL.

  On the RISC-V side, there are fewer patches, but a total of ten new
  single-board computers based on variations of the Allwinner D1/T113
  chip, plus one more board based on Microchip Polarfire.

  As usual, arm64 has by far the most changes here, with over 700
  non-merge changesets, among them over 400 alone for Qualcomm. The
  newly added SoCs this time are all recent high-end embedded SoCs for
  various markets, each on comes with support for its reference board:

   - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
   - Qualcomm QDU1000/QRU1000 5G RAN platform
   - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
   - TI J784S4 for industrial and automotive applications

  In total, there are 46 new arm64 machines:
   - Reference platforms for each of the five new SoCs
   - Three Amlogic based development boards
   - Six embedded machines based on NXP i.MX8MM and i.MX8MP
   - The Mediatek mt7986a based Banana Pi R3 router
   - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
     (Snapdragon 662) and SM8250 (Snapdragon 865)
   - Two LTE dongles, also based on MSM8916
   - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
     SDM450 and SDM632
   - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
   - Nine development boards based on Rockchips RK3588, RK3568, RK3566
     and RK3328.
   - Five development machines based on TI K3 (AM642/AM654/AM68/AM69)

  The cleanup of dtc warnings continues across all platforms, adding to
  the total number of changes"

* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
  dt-bindings: riscv: correct starfive visionfive 2 compatibles
  ARM: dts: socfpga: Add enclustra PE1 devicetree
  dt-bindings: altera: Add enclustra mercury PE1
  arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
  arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
  arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
  arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
  arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
  arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
  arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
  arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
  arm64: dts: qcom: pmk8350: Use the correct PON compatible
  arm64: dts: qcom: sc8280xp-x13s: Enable external display
  arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
  arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
  arm64: dts: qcom: sm8350-hdk: enable GPU
  arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
  arm64: dts: qcom: sm8350: finish reordering nodes
  arm64: dts: qcom: sm8350: move more nodes to correct place
  arm64: dts: qcom: sm8350: reorder device nodes
  ...

Pull ARM defconfigs updates from Arnd Bergmann:
 "As usual, this contains all the patches to enable options for newly
  added device drivers in the 32-bit and 64-bit defconfig files.

  I have sorted the files according to the changes to Kconfig files,
  to make it easier to check what has changed compared to the 'make
  savedefconfig' output.

  The most notable change this time is a series from Mark Brown to add
  a 'virtconfig' target for arm64, which is for the moment the same as
  the 'defconfig' target but disables all the top-level SoC specific
  options in order to have a smaller and faster kernel build"

* tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
  arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
  arm64: defconfig: Enable DisplayPort on SC8280XP laptops
  arm64: configs: Add virtconfig
  kbuild: Provide a version of merge_into_defconfig without override warnings
  scripts: merge_config: Add option to suppress warning on overrides
  ARM: reorder defconfig files
  arm64: reorder defconfig
  arm64: defconfig: enable Qualcomm SDAM nvmem driver
  arm64: defconfig: enable SM8450 DISPCC clock driver
  ARM: defconfig: Add IOSCHED_BFQ to the default configs
  ARM: configs: multi_v7: enable NVMEM driver for STM32
  ARM: Add wpcm450_defconfig for Nuvoton WPCM450
  arm64: defconfig: Enable DMA_RESTRICTED_POOL
  arm64: defconfig: Enable missing configs for mt8192-asurada
  riscv: defconfig: Enable the Allwinner D1 platform and drivers
  ARM: imx_v6_v7_defconfig: Don't enable PROVE_LOCKING
  ARM: multi_v7_defconfig: Add GXP Fan and SPI support
  ARM: add multi_v7_lpae_defconfig
  kbuild: Add config fragment merge functionality
  ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "The majority of the changes are for the OMAP2 platform, mostly
  removing some dead code that got left behind from previous cleanups.

  Aside from that, there are very minor updates and correctness fixes
  for Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1"

* tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
  dt-bindings: soc: samsung: exynos-pmu: allow phys as child
  ARM: imx: mach-imx6ul: add imx6ulz support
  ARM: imx: Call ida_simple_remove() for ida_simple_get
  arm64: drop redundant "ARMv8" from Kconfig option title
  ARM: ep93xx: Convert to use descriptors for GPIO LEDs
  ARM: s3c: fix s3c64xx_set_timer_source prototype
  ARM: OMAP2+: Fix spelling typos in comment
  ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h>
  ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h>
  ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
  ARM: BCM63xx: remove useless goto statement
  ARM: omap2: make functions static
  ARM: omap2: remove unused omap2_pm_init
  ARM: omap2: remove unused declarations
  ARM: omap2: remove unused functions
  ARM: omap2: smartreflex: remove on_init control
  ARM: omap2: remove APLL control
  ARM: omap2: simplify clock2xxx header
  ARM: omap2: remove unused omap_hwmod_reset.c
  ARM: omap2: remove unused headers
  ...

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7 ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

Pull block updates from Jens Axboe:

 - NVMe updates via Christoph:
      - Small improvements to the logging functionality (Amit Engel)
      - Authentication cleanups (Hannes Reinecke)
      - Cleanup and optimize the DMA mapping cod in the PCIe driver
        (Keith Busch)
      - Work around the command effects for Format NVM (Keith Busch)
      - Misc cleanups (Keith Busch, Christoph Hellwig)
      - Fix and cleanup freeing single sgl (Keith Busch)

 - MD updates via Song:
      - Fix a rare crash during the takeover process
      - Don't update recovery_cp when curr_resync is ACTIVE
      - Free writes_pending in md_stop
      - Change active_io to percpu

 - Updates to drbd, inching us closer to unifying the out-of-tree driver
   with the in-tree one (Andreas, Christoph, Lars, Robert)

 - BFQ update adding support for multi-actuator drives (Paolo, Federico,
   Davide)

 - Make brd compliant with REQ_NOWAIT (me)

 - Fix for IOPOLL and queue entering, fixing stalled IO waiting on
   timeouts (me)

 - Fix for REQ_NOWAIT with multiple bios (me)

 - Fix memory leak in blktrace cleanup (Greg)

 - Clean up sbitmap and fix a potential hang (Kemeng)

 - Clean up some bits in BFQ, and fix a bug in the request injection
   (Kemeng)

 - Clean up the request allocation and issue code, and fix some bugs
   related to that (Kemeng)

 - ublk updates and fixes:
      - Add support for unprivileged ublk (Ming)
      - Improve device deletion handling (Ming)
      - Misc (Liu, Ziyang)

 - s390 dasd fixes (Alexander, Qiheng)

 - Improve utility of request caching and fixes (Anuj, Xiao)

 - zoned cleanups (Pankaj)

 - More constification for kobjs (Thomas)

 - blk-iocost cleanups (Yu)

 - Remove bio splitting from drivers that don't need it (Christoph)

 - Switch blk-cgroups to use struct gendisk. Some of this is now
   incomplete as select late reverts were done. (Christoph)

 - Add bvec initialization helpers, and convert callers to use that
   rather than open-coding it (Christoph)

 - Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
   Matthew, Ulf, Zhong)

* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
  brd: use radix_tree_maybe_preload instead of radix_tree_preload
  block: use proper return value from bio_failfast()
  block: bio-integrity: Copy flags when bio_integrity_payload is cloned
  block: Fix io statistics for cgroup in throttle path
  brd: mark as nowait compatible
  brd: check for REQ_NOWAIT and set correct page allocation mask
  brd: return 0/-error from brd_insert_page()
  block: sync mixed merged request's failfast with 1st bio's
  Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
  Revert "blk-cgroup: pass a gendisk to blkg_lookup"
  Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
  Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
  Revert "blk-cgroup: move the cgroup information to struct gendisk"
  nvme-pci: remove iod use_sgls
  nvme-pci: fix freeing single sgl
  block: ublk: check IO buffer based on flag need_get_data
  s390/dasd: Fix potential memleak in dasd_eckd_init()
  s390/dasd: sort out physical vs virtual pointers usage
  block: Remove the ALLOC_CACHE_SLACK constant
  block: make kobj_type structures constant
  ...

Pull legacy dio update from Jens Axboe:
 "We only have a few file systems that use the old dio code, make them
  select it rather than build it unconditionally"

* tag 'for-6.3/dio-2023-02-16' of git://git.kernel.dk/linux:
  fs: build the legacy direct I/O code conditionally
  fs: move sb_init_dio_done_wq out of direct-io.c

Pull io_uring ITER_UBUF conversion from Jens Axboe:
 "Since we now have ITER_UBUF available, switch to using it for single
  ranges as it's more efficient than ITER_IOVEC for that"

* tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux:
  block: use iter_ubuf for single range
  iov_iter: move iter_ubuf check inside restore WARN
  io_uring: use iter_ubuf for single range imports
  io_uring: switch network send/recv to ITER_UBUF
  iov: add import_ubuf()

Pull io_uring updates from Jens Axboe:

 - Cleanup series making the async prep and handling of
   REQ_F_FORCE_ASYNC easier to follow and verify (Dylan)

 - Enable specifying specific flags for OP_MSG_RING (Breno)

 - Enable use of KASAN with the internal request cache (Breno)

 - Split the opcode definition structs into a hot and cold part (Breno)

 - OP_MSG_RING fixes (Pavel, me)

 - Fix an issue with IOPOLL cancelation and PREEMPT_NONE (me)

 - Handle TIF_NOTIFY_RESUME for the io-wq threads that never return to
   userspace (me)

 - Add support for using io_uring_register() with a registered ring fd
   (Josh)

 - Improve handling of poll on the ring fd (Pavel)

 - Series improving the task_work handling (Pavel)

 - Misc cleanups, fixes, improvements (Dmitrii, Quanfa, Richard, Pavel,
   me)

* tag 'for-6.3/io_uring-2023-02-16' of git://git.kernel.dk/linux: (51 commits)
  io_uring: Support calling io_uring_register with a registered ring fd
  io_uring,audit: don't log IORING_OP_MADVISE
  io_uring: mark task TASK_RUNNING before handling resume/task work
  io_uring: always go async for unsupported open flags
  io_uring: always go async for unsupported fadvise flags
  io_uring: for requests that require async, force it
  io_uring: if a linked request has REQ_F_FORCE_ASYNC then run it async
  io_uring: add reschedule point to handle_tw_list()
  io_uring: add a conditional reschedule to the IOPOLL cancelation loop
  io_uring: return normal tw run linking optimisation
  io_uring: refactor tctx_task_work
  io_uring: refactor io_put_task helpers
  io_uring: refactor req allocation
  io_uring: improve io_get_sqe
  io_uring: kill outdated comment about overflow flush
  io_uring: use user visible tail in io_uring_poll()
  io_uring: pass in io_issue_def to io_assign_file()
  io_uring: Enable KASAN for request cache
  io_uring: handle TIF_NOTIFY_RESUME when checking for task_work
  io_uring/msg-ring: ensure flags passing works for task_work completions
  ...

Pull dlm updates from David Teigland:
 "This fixes some races in the lowcomms startup and shutdown code that
  were found by targeted stress testing that quickly and repeatedly
  joins and leaves lockspaces"

* tag 'dlm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  fs: dlm: remove unnecessary waker_up() calls
  fs: dlm: move state change into else branch
  fs: dlm: remove newline in log_print
  fs: dlm: reduce the shutdown timeout to 5 secs
  fs: dlm: make dlm sequence id more robust
  fs: dlm: wait until all midcomms nodes detect version
  fs: dlm: ignore unexpected non dlm opts msgs
  fs: dlm: bring back previous shutdown handling
  fs: dlm: send FIN ack back in right cases
  fs: dlm: move sending fin message into state change handling
  fs: dlm: don't set stop rx flag after node reset
  fs: dlm: fix race setting stop tx flag
  fs: dlm: be sure to call dlm_send_queue_flush()
  fs: dlm: fix use after free in midcomms commit
  fs: dlm: start midcomms before scand
  fs/dlm: Remove "select SRCU"
  fs: dlm: fix return value check in dlm_memory_init()

Pull btrfs updates from David Sterba:
 "The usual mix of performance improvements and new features.

  The core change is reworking how checksums are processed, with
  followup cleanups and simplifications. There are two minor changes in
  block layer and iomap code.

  Features:

   - block group allocation class heuristics:
      - pack files by size (up to 128k, up to 8M, more) to avoid
        fragmentation in block groups, assuming that file size and life
        time is correlated, in particular this may help during balance
      - with tracepoints and extensible in the future

  Performance:

   - send: cache directory utimes and only emit the command when
     necessary
      - speedup up to 10x
      - smaller final stream produced (no redundant utimes commands
        issued)
      - compatibility not affected

   - fiemap: skip backref checks for shared leaves
      - speedup 3x on sample filesystem with all leaves shared (e.g. on
        snapshots)

   - micro optimized b-tree key lookup, speedup in metadata operations
     (sample benchmark: fs_mark +10% of files/sec)

  Core changes:

   - change where checksumming is done in the io path:
      - checksum and read repair does verification at lower layer
      - cascaded cleanups and simplifications

   - raid56 refactoring and cleanups

  Fixes:

   - sysfs: make sure that a run-time change of a feature is correctly
     tracked by the feature files

   - scrub: better reporting of tree block errors

  Other:

   - locally enable -Wmaybe-uninitialized after fixing all warnings

   - misc cleanups, spelling fixes

  Other code:

   - block: export bio_split_rw

   - iomap: remove IOMAP_F_ZONE_APPEND"

* tag 'for-6.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (109 commits)
  btrfs: make kobj_type structures constant
  btrfs: remove the bdev argument to btrfs_rmap_block
  btrfs: don't rely on unchanging ->bi_bdev for zone append remaps
  btrfs: never return true for reads in btrfs_use_zone_append
  btrfs: pass a btrfs_bio to btrfs_use_append
  btrfs: set bbio->file_offset in alloc_new_bio
  btrfs: use file_offset to limit bios size in calc_bio_boundaries
  btrfs: do unsigned integer division in the extent buffer binary search loop
  btrfs: eliminate extra call when doing binary search on extent buffer
  btrfs: raid56: handle endio in scrub_rbio
  btrfs: raid56: handle endio in recover_rbio
  btrfs: raid56: handle endio in rmw_rbio
  btrfs: raid56: submit the read bios from scrub_assemble_read_bios
  btrfs: raid56: fold rmw_read_wait_recover into rmw_read_bios
  btrfs: raid56: fold recover_assemble_read_bios into recover_rbio
  btrfs: raid56: add a bio_list_put helper
  btrfs: raid56: wait for I/O completion in submit_read_bios
  btrfs: raid56: simplify code flow in rmw_rbio
  btrfs: raid56: simplify error handling and code flow in raid56_parity_write
  btrfs: replace btrfs_wait_tree_block_writeback by wait_on_extent_buffer_writeback
  ...

Pull UDF and ext2 fixes from Jan Kara:

 - Rewrite of udf directory iteration code to address multiple syzbot
   reports

 - Fixes to udf extent handling and block mapping code to address
   several syzbot reports and filesystem corruption issues uncovered by
   fsx & fsstress

 - Convert udf to kmap_local()

 - Add sanity checks when loading udf bitmaps

 - Drop old VARCONV support which I've never seen used and which was
   broken for quite some years without anybody noticing

 - Finish conversion of ext2 to kmap_local()

 - One fix to mpage_writepages() on which other udf fixes depend

* tag 'fixes_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (78 commits)
  udf: Avoid directory type conversion failure due to ENOMEM
  udf: Use unsigned variables for size calculations
  udf: remove reporting loc in debug output
  udf: Check consistency of Space Bitmap Descriptor
  udf: Fix file counting in LVID
  udf: Limit file size to 4TB
  udf: Don't return bh from udf_expand_dir_adinicb()
  udf: Convert udf_expand_file_adinicb() to avoid kmap_atomic()
  udf: Convert udf_adinicb_writepage() to memcpy_to_page()
  udf: Switch udf_adinicb_readpage() to kmap_local_page()
  udf: Move udf_adinicb_readpage() to inode.c
  udf: Mark aops implementation static
  udf: Switch to single address_space_operations
  udf: Add handling of in-ICB files to udf_bmap()
  udf: Convert all file types to use udf_write_end()
  udf: Convert in-ICB files to use udf_write_begin()
  udf: Convert in-ICB files to use udf_direct_IO()
  udf: Convert in-ICB files to use udf_writepages()
  udf: Unify .read_folio for normal and in-ICB files
  udf: Fix off-by-one error when discarding preallocation
  ...