- 13 Nov, 2018 13 commits
-
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 02e42566 upstream. When I added the missing memory outputs, I failed to update the index of the first argument (ebx) on 32-bit builds, which broke the fallbacks. Somehow I must have screwed up my testing or gotten lucky. Add another test to cover gettimeofday() as well. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 715bd9d1 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks") Link: http://lkml.kernel.org/r/21bd45ab04b6d838278fa5bebfa9163eceffa13c.1538608971.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 715bd9d1 upstream. The syscall fallbacks in the vDSO have incorrect asm constraints. They are not marked as writing to their outputs -- instead, they are marked as clobbering "memory", which is useless. In particular, gcc is smart enough to know that the timespec parameter hasn't escaped, so a memory clobber doesn't clobber it. And passing a pointer as an asm *input* does not tell gcc that the pointed-to value is changed. Add in the fact that the asm instructions weren't volatile, and gcc was free to omit them entirely unless their sole output (the return value) is used. Which it is (phew!), but that stops happening with some upcoming patches. As a trivial example, the following code: void test_fallback(struct timespec *ts) { vdso_fallback_gettime(CLOCK_MONOTONIC, ts); } compiles to: 00000000000000c0 <test_fallback>: c0: c3 retq To add insult to injury, the RCX and R11 clobbers on 64-bit builds were missing. The "memory" clobber is also unnecessary -- no ordering with respect to other memory operations is needed, but that's going to be fixed in a separate not-for-stable patch. Fixes: 2aae950b ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/2c0231690551989d2fafa60ed0e7b5cc8b403908.1538422295.git.luto@kernel.orgSigned-off-by:
-
Tomi Valkeinen authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 1bafcbf5 upstream. OMAPFB_MEMORY_READ ioctl reads pixels from the LCD's memory and copies them to a userspace buffer. The code has two issues: - The user provided width and height could be large enough to overflow the calculations - The copy_to_user() can copy uninitialized memory to the userspace, which might contain sensitive kernel information. Fix these by limiting the width & height parameters, and only copying the amount of data that we actually received from the LCD. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
Jann Horn <jannh@google.com> Cc: stable@vger.kernel.org Cc: security@kernel.org Cc: Will Deacon <will.deacon@arm.com> Cc: Jann Horn <jannh@google.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 58bc4c34 upstream. 5dd0b16c ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP") made the availability of the NR_TLB_REMOTE_FLUSH* counters inside the kernel unconditional to reduce #ifdef soup, but (either to avoid showing dummy zero counters to userspace, or because that code was missed) didn't update the vmstat_array, meaning that all following counters would be shown with incorrect values. This only affects kernel builds with CONFIG_VM_EVENT_COUNTERS=y && CONFIG_DEBUG_TLBFLUSH=y && CONFIG_SMP=n. Link: http://lkml.kernel.org/r/20181001143138.95119-2-jannh@google.com Fixes: 5dd0b16c ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP") Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Roman Gushchin <guro@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Kemi Wang <kemi.wang@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Simon Guo authored
BugLink: https://bugs.launchpad.net/bugs/1793451 When one vma was with flag VM_LOCKED|VM_LOCKONFAULT (by invoking mlock2(,MLOCK_ONFAULT)), it can again be populated with mlock() with VM_LOCKED flag only. There is a hole in mlock_fixup() which increase mm->locked_vm twice even the two operations are on the same vma and both with VM_LOCKED flags. The issue can be reproduced by following code: mlock2(p, 1024 * 64, MLOCK_ONFAULT); //VM_LOCKED|VM_LOCKONFAULT mlock(p, 1024 * 64); //VM_LOCKED Then check the increase VmLck field in /proc/pid/status(to 128k). When vma is set with different vm_flags, and the new vm_flags is with VM_LOCKED, it is not necessarily be a "new locked" vma. This patch corrects this bug by prevent mm->locked_vm from increment when old vm_flags is already VM_LOCKED. Link: http://lkml.kernel.org/r/1472554781-9835-3-git-send-email-wei.guo.simon@gmail.comSigned-off-by:
Simon Guo <wei.guo.simon@gmail.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Simon Guo <wei.guo.simon@gmail.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit b155b4fd) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Kleber Souza <kleber.souza@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Eddie.Horng authored
BugLink: https://bugs.launchpad.net/bugs/1786729 The code in cap_inode_getsecurity(), introduced by commit 8db6c34f ("Introduce v3 namespaced file capabilities"), should use d_find_any_alias() instead of d_find_alias() do handle unhashed dentry correctly. This is needed, for example, if execveat() is called with an open but unlinked overlayfs file, because overlayfs unhashes dentry on unlink. This is a regression of real life application, first reported at https://www.spinics.net/lists/linux-unionfs/msg05363.html Below reproducer and setup can reproduce the case. const char* exec="echo"; const char *newargv[] = { "echo", "hello", NULL}; const char *newenviron[] = { NULL }; int fd, err; fd = open(exec, O_PATH); unlink(exec); err = syscall(322/*SYS_execveat*/, fd, "", newargv, newenviron, AT_EMPTY_PATH); if(err<0) fprintf(stderr, "execveat: %s\n", strerror(errno)); gcc compile into ~/test/a.out mount -t overlay -orw,lowerdir=/mnt/l,upperdir=/mnt/u,workdir=/mnt/w none /mnt/m cd /mnt/m cp /bin/echo . ~/test/a.out Expected result: hello Actually result: execveat: Invalid argument dmesg: Invalid argument reading file caps for /dev/fd/3 The 2nd reproducer and setup emulates similar case but for regular filesystem: const char* exec="echo"; int fd, err; char buf[256]; fd = open(exec, O_RDONLY); unlink(exec); err = fgetxattr(fd, "security.capability", buf, 256); if(err<0) fprintf(stderr, "fgetxattr: %s\n", strerror(errno)); gcc compile into ~/test_fgetxattr cd /tmp cp /bin/echo . ~/test_fgetxattr Result: fgetxattr: Invalid argument On regular filesystem, for example, ext4 read xattr from disk and return to execveat(), will not trigger this issue, however, the overlay attr handler pass real dentry to vfs_getxattr() will. This reproducer calls fgetxattr() with an unlinked fd, involkes vfs_getxattr() then reproduced the case that d_find_alias() in cap_inode_getsecurity() can't find the unlinked dentry. Suggested-by:
Amir Goldstein <amir73il@gmail.com> Acked-by:
Serge E. Hallyn <serge@hallyn.com> Fixes: 8db6c34f ("Introduce v3 namespaced file capabilities") Cc: <stable@vger.kernel.org> # v4.14 Signed-off-by:
Eddie Horng <eddie.horng@mediatek.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> (backported from commit 355139a8) Signed-off-by:
-
Julian Wiedmann authored
BugLink: http://bugs.launchpad.net/bugs/1800639 When sending an skb, afiucv_hs_send() bails out on various error conditions. But currently the caller has no way of telling whether the skb was freed or not - resulting in potentially either a) leaked skbs from iucv_send_ctrl(), or b) double-free's from iucv_sock_sendmsg(). As dev_queue_xmit() will always consume the skb (even on error), be consistent and also free the skb from all other error paths. This way callers no longer need to care about managing the skb. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> (cherry-picked from commit b2f54394) Signed-off-by:
Frank Heimes <frank.heimes@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Julian Wiedmann authored
BugLink: http://bugs.launchpad.net/bugs/1800639 Inbound packets may have any combination of flag bits set in their iucv header. If we don't know how to handle a specific combination, drop the skb instead of leaking it. To clarify what error is returned in this case, replace the hard-coded 0 with the corresponding macro. Signed-off-by:
-
Steffen Klassert authored
BugLink: https://bugs.launchpad.net/bugs/1801878 Since commit 222d7dbd ("net: prevent dst uses after free") skb_dst_force() might clear the dst_entry attached to the skb. The xfrm code don't expect this to happen, so we crash with a NULL pointer dereference in this case. Fix it by checking skb_dst(skb) for NULL after skb_dst_force() and drop the packet in cast the dst_entry was cleared. Fixes: 222d7dbd ("net: prevent dst uses after free") Reported-by:
Tobias Hommel <netdev-list@genoetigt.de> Reported-by:
Kristian Evensen <kristian.evensen@gmail.com> Reported-by:
Wolfgang Walter <linux@stwm.de> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> (backported from commit 9e143793) [kmously: minor context adjustment] Signed-off-by:
Gavin Guo <gavin.guo@canonical.com> Acked-by:
-
Jean Delvare authored
BugLink: https://bugs.launchpad.net/bugs/1800641 Functions qeth_get_ipa_msg and qeth_get_ipa_cmd_name are modifying the last member of global arrays without any locking that I can see. If two instances of either function are running at the same time, it could cause a race ultimately leading to an array overrun (the contents of the last entry of the array is the only guarantee that the loop will ever stop). Performing the lookups without modifying the arrays is admittedly slower (two comparisons per iteration instead of one) but these are operations which are rare (should only be needed in error cases or when debugging, not during successful operation) and it seems still less costly than introducing a mutex to protect the arrays in question. As a side bonus, it allows us to declare both arrays as const data. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: Ursula Braun <ubraun@linux.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
-
zhong jiang authored
BugLink: https://bugs.launchpad.net/bugs/1800641 Use the common code ARRAY_SIZE macro instead of a private implementation. Reviewed-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Andy Whitcroft authored
BugLink: https://bugs.launchpad.net/bugs/1786013Signed-off-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by:
-
- 24 Oct, 2018 2 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1799401Signed-off-by:
-
- 23 Oct, 2018 5 commits
-
-
Vegard Nossum authored
BugLink: https://bugs.launchpad.net/bugs/1793464 Quentin ran into this bug: WARNING: CPU: 64 PID: 10085 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x65/0x80 sysfs: cannot create duplicate filename '/devices/virtual/block/nbd3/pid' Modules linked in: nbd CPU: 64 PID: 10085 Comm: qemu-nbd Tainted: G D 4.6.0+ #7 0000000000000000 ffff8820330bba68 ffffffff814b8791 ffff8820330bbac8 0000000000000000 ffff8820330bbab8 ffffffff810d04ab ffff8820330bbaa8 0000001f00000296 0000000000017681 ffff8810380bf000 ffffffffa0001790 Call Trace: [<ffffffff814b8791>] dump_stack+0x4d/0x6c [<ffffffff810d04ab>] __warn+0xdb/0x100 [<ffffffff810d0574>] warn_slowpath_fmt+0x44/0x50 [<ffffffff81218c65>] sysfs_warn_dup+0x65/0x80 [<ffffffff81218a02>] sysfs_add_file_mode_ns+0x172/0x180 [<ffffffff81218a35>] sysfs_create_file_ns+0x25/0x30 [<ffffffff81594a76>] device_create_file+0x36/0x90 [<ffffffffa0000e8d>] __nbd_ioctl+0x32d/0x9b0 [nbd] [<ffffffff814cc8e8>] ? find_next_bit+0x18/0x20 [<ffffffff810f7c29>] ? select_idle_sibling+0xe9/0x120 [<ffffffff810f6cd7>] ? __enqueue_entity+0x67/0x70 [<ffffffff810f9bf0>] ? enqueue_task_fair+0x630/0xe20 [<ffffffff810efa76>] ? resched_curr+0x36/0x70 [<ffffffff810f0078>] ? check_preempt_curr+0x78/0x90 [<ffffffff810f00a2>] ? ttwu_do_wakeup+0x12/0x80 [<ffffffff810f01b1>] ? ttwu_do_activate.constprop.86+0x61/0x70 [<ffffffff810f0c15>] ? try_to_wake_up+0x185/0x2d0 [<ffffffff810f0d6d>] ? default_wake_function+0xd/0x10 [<ffffffff81105471>] ? autoremove_wake_function+0x11/0x40 [<ffffffffa0001577>] nbd_ioctl+0x67/0x94 [nbd] [<ffffffff814ac0fd>] blkdev_ioctl+0x14d/0x940 [<ffffffff811b0da2>] ? put_pipe_info+0x22/0x60 [<ffffffff811d96cc>] block_ioctl+0x3c/0x40 [<ffffffff811ba08d>] do_vfs_ioctl+0x8d/0x5e0 [<ffffffff811aa329>] ? ____fput+0x9/0x10 [<ffffffff810e9092>] ? task_work_run+0x72/0x90 [<ffffffff811ba627>] SyS_ioctl+0x47/0x80 [<ffffffff8185f5df>] entry_SYSCALL_64_fastpath+0x17/0x93 ---[ end trace 7899b295e4f850c8 ]--- It seems fairly obvious that device_create_file() is not being protected from being run concurrently on the same nbd. Quentin found the following relevant commits: 1a2ad211 nbd: add locking to nbd_ioctl 90b8f282 [PATCH] end of methods switch: remove the old ones d4430d62 [PATCH] beginning of methods conversion 08f85851 [PATCH] move block_device_operations to blkdev.h It would seem that the race was introduced in the process of moving nbd from BKL to unlocked ioctls. By setting nbd->task_recv while the mutex is held, we can prevent other processes from running concurrently (since nbd->task_recv is also checked while the mutex is held). Reported-and-tested-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pavel Machek <pavel@suse.cz> Cc: Jens Axboe <axboe@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Jens Axboe <axboe@fb.com> (backported from commit 97240963) Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1793464 We hit a warning when shutting down the nbd connection because we have irq's disabled. We don't really need to do the shutdown under the lock, just clear the nbd->sock. So do the shutdown outside of the irq. This gets rid of the warning. Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Markus Pargmann authored
BugLink: https://bugs.launchpad.net/bugs/1793464 Group all variables that are reset after a disconnect into reset functions. This patch adds two of these functions, nbd_reset() and nbd_bdev_reset(). Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> (cherry picked from commit 0e4f0f6f) Signed-off-by:
-
Markus Pargmann authored
BugLink: https://bugs.launchpad.net/bugs/1793464 It may be useful to know in the client that a connection timed out. The current code returns success for a timeout. This patch reports the error code -ETIMEDOUT for a timeout. Signed-off-by:
-
Markus Pargmann authored
BugLink: https://bugs.launchpad.net/bugs/1793464 As discussed on the mailing list, the usage of signals for timeout handling has a lot of potential issues. The nbd driver used for some time signals for timeouts. These signals where able to get the threads out of the blocking socket operations. This patch removes all signal usage and uses a socket shutdown instead. The socket descriptor itself is cleared later when the whole nbd device is closed. The tasks_lock is removed as we do not depend on this anymore. Instead a new lock for the socket is introduced so we can safely work with the socket in the timeout handler outside of the two main threads. Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> (backported from commit 23272a67) Signed-off-by:
-
- 22 Oct, 2018 2 commits
-
-
Kiran Kumar Modukuri authored
BugLink: https://bugs.launchpad.net/bugs/1797314 [Trace] seen this in 4.4.x kernels and the same bug affects fscache in latest upstreams kernels. Jun 25 11:32:08 kernel: [4740718.880898] FS-Cache: Jun 25 11:32:08 kernel: [4740718.880920] FS-Cache: Assertion failed Jun 25 11:32:08 kernel: [4740718.880934] FS-Cache: 0 > 0 is false Jun 25 11:32:08 kernel: [4740718.881001] ------------[ cut here ]------------ Jun 25 11:32:08 kernel: [4740718.881017] kernel BUG at /usr/src/linux-4.4.0/fs/fscache/operation.c:449! Jun 25 11:32:08 kernel: [4740718.881040] invalid opcode: 0000 [#1] SMP ... Jun 25 11:32:08 kernel: [4740718.892659] Call Trace: Jun 25 11:32:08 kernel: [4740718.893506] [<ffffffffc1464cf9>] cachefiles_read_copier+0x3a9/0x410 [cachefiles] Jun 25 11:32:08 kernel: [4740718.894374] [<ffffffffc037e272>] fscache_op_work_func+0x22/0x50 [fscache] Jun 25 11:32:08 kernel: [4740718.895180] [<ffffffff81096da0>] process_one_work+0x150/0x3f0 Jun 25 11:32:08 kernel: [4740718.895966] [<ffffffff8109751a>] worker_thread+0x11a/0x470 Jun 25 11:32:08 kernel: [4740718.896753] [<ffffffff81808e59>] ? __schedule+0x359/0x980 Jun 25 11:32:08 kernel: [4740718.897783] [<ffffffff81097400>] ? rescuer_thread+0x310/0x310 Jun 25 11:32:08 kernel: [4740718.898581] [<ffffffff8109cdd6>] kthread+0xd6/0xf0 Jun 25 11:32:08 kernel: [4740718.899469] [<ffffffff8109cd00>] ? kthread_park+0x60/0x60 Jun 25 11:32:08 kernel: [4740718.900477] [<ffffffff8180d0cf>] ret_from_fork+0x3f/0x70 Jun 25 11:32:08 kernel: [4740718.901514] [<ffffffff8109cd00>] ? kthread_park+0x60/0x60 [Problem] atomic_sub(n_pages, &op->n_pages); if (atomic_read(&op->n_pages) <= 0) fscache_op_complete(&op->op, true); The code in fscache_retrieval_complete is using atomic_sub followed by an atomic_read. This causes two threads doing a decrement of pages to race with each other seeing the op->refcount 0 at same time, and end up calling fscache_op_complete in both the threads leading to the OOPs. [Fix] The fix is trivial to use atomic_sub_return instead of two calls. Signed-off-by:
Kiran Kumar Modukuri <kiran.modukuri@gmail.com> (backported from https://www.redhat.com/archives/linux-cachefs/2018-September/msg00001.html The message has been on-list since 21 September 2018 and has received no feedback whatsoever. I have cleaned up the commit message a little bit and dropped a whitespace change.) Signed-off-by:
Daniel Axtens <daniel.axtens@canonical.com> Acked-by:
-
Mauricio Faria de Oliveira authored
BugLink: https://bugs.launchpad.net/bugs/1798110 The 'reqs' counter is incremented in the SCSI .queuecommand() path, right before virtscsi_queuecommand() is called, in either - virtscsi_queuecommand_single(), or - virtscsi_queuecommand_multi(), via virtscsi_pick_vq{_mq}(). And it's decremented only in the SCSI command completion callback (after the command is successfully queued and completed by adapter): - virtscsi_complete_cmd(). This allows for the counter to be incremented but _not_ decremented if virtscsi_queuecommand() gets an error to add/kick the command to the virtio ring (i.e., virtscsi_kick_cmd() fails with not 0 nor EIO). static virtscsi_queuecommand(...) { ... ret = virtscsi_kick_cmd(...) if (ret == -EIO) { ... virtscsi_complete_cmd(vscsi, cmd); ... } else if (ret != 0) { return SCSI_MLQUEUE_HOST_BUSY; } return 0; } In that case, the return code SCSI_MLQUEUE_HOST_BUSY causes the SCSI command to be requeued by the SCSI layer, which sends it again later in the .queuecommand() path -- incrementing the reqs counter _again_. This may happen many times for the same SCSI command, depending on the virtio ring condition/implementation, so the reqs counter will never return to zero (it's decremented only once in the completion callback). And it may happen for (m)any SCSI commands in this path. Unfortunately.. that causes a problem with a downstream/SAUCE patch for Xenial, which uses the reqs counter to sync with the completion callback: commit f1f609d8 ("UBUNTU: SAUCE: (no-up) virtio-scsi: Fix race in target free"), and waits for the value to become zero. This problem plus that patch prevent the SCSI target removal from finishing, eventually causing a CPU soft lockup on another CPU that is waiting for some kernel resource that is/remains locked in the stack chain of this CPU. This has been verified 1) with a synthetic test case with QEMU+GDB that fakes the number of available elements in virtio ring for one time (harmless), so to force the SCSI command to be requeued, then uses QEMU monitor to remove the virtio-scsi target. _AND_ 2) with the test-case reported by the customer (a for-loop on a cloud instance that repeatedly mounts the virtio-scsi drive, copy data out of it, unmount it, then detach the virtio-scsi drive). (Here, the problem usually happens in the 1st or 2nd iteration, but with the patch it has run for 35 iterations without any problems). Upstream has done away with the reqs counter (originally used only to check if any requests were still active, for steering; not for our sync purposes). Instead of trying to find an alternative sync way for now let's just fix the behavior which we know is incorrect. Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Tested-by:
David Coronel <david.coronel@canonical.com> Acked-by:
-
- 19 Oct, 2018 18 commits
-
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1769937 Sync with zfsutils-linux 0.6.5.6-0ubuntu26 to pick up fixes for LP#1769937. Upstream ZFS fix 4ceb8dd6fdfd ("Fix 'zpool create -t <tempname>'") fixes error message and error exit when using the -t option when creating a pool. Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1798770Signed-off-by:
-
Mike Snitzer authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit 013ad043 upstream. sector_div() is only viable for use with sector_t. dm_block_t is typedef'd to uint64_t -- so use div_u64() instead. Fixes: 3ab91828 ("dm thin metadata: try to avoid ever aborting transactions") Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Ashish Samant authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit cbe355f5 upstream. In dlm_init_lockres() we access and modify res->tracking and dlm->tracking_list without holding dlm->track_lock. This can cause list corruptions and can end up in kernel panic. Fix this by locking res->tracking and dlm->tracking_list with dlm->track_lock instead of dlm->spinlock. Link: http://lkml.kernel.org/r/1529951192-4686-1-git-send-email-ashish.samant@oracle.comSigned-off-by:
Ashish Samant <ashish.samant@oracle.com> Reviewed-by:
Changwei Ge <ge.changwei@h3c.com> Acked-by:
Joseph Qi <jiangqi903@gmail.com> Acked-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit f8a00cef upstream. Currently, you can use /proc/self/task/*/stack to cause a stack walk on a task you control while it is running on another CPU. That means that the stack can change under the stack walker. The stack walker does have guards against going completely off the rails and into random kernel memory, but it can interpret random data from your kernel stack as instruction pointers and stack pointers. This can cause exposure of kernel stack contents to userspace. Restrict the ability to inspect kernel stacks of arbitrary tasks to root in order to prevent a local attacker from exploiting racy stack unwinding to leak kernel task stack contents. See the added comment for a longer rationale. There don't seem to be any users of this userspace API that can't gracefully bail out if reading from the file fails. Therefore, I believe that this change is unlikely to break things. In the case that this patch does end up needing a revert, the next-best solution might be to fake a single-entry stack based on wchan. Link: http://lkml.kernel.org/r/20180927153316.200286-1-jannh@google.com Fixes: 2ec220e2 ("proc: add /proc/*/stack") Signed-off-by:
-
Leonard Crestez authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit d80771c0 upstream. When compiling with CONFIG_DEBUG_ATOMIC_SLEEP=y the mxs-dcp driver prints warnings such as: WARNING: CPU: 0 PID: 120 at kernel/sched/core.c:7736 __might_sleep+0x98/0x9c do not call blocking ops when !TASK_RUNNING; state=1 set at [<8081978c>] dcp_chan_thread_sha+0x3c/0x2ec The problem is that blocking ops will manipulate current->state themselves so it is not allowed to call them between set_current_state(TASK_INTERRUPTIBLE) and schedule(). Fix this by converting the per-chan mutex to a spinlock (it only protects tiny list ops anyway) and rearranging the wait logic so that callbacks are called current->state as TASK_RUNNING. Those callbacks will indeed call blocking ops themselves so this is required. Cc: <stable@vger.kernel.org> Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit 709ae62e upstream. The issue is the same as commit dd9aa335 ("ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO"), the output requires to connect to a node with Amp-out capability. Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue. BugLink: https://bugs.launchpad.net/bugs/1775068Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Aurelien Aptel authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit 0595751f upstream. When mounting a Windows share that is the root of a drive (eg. C$) the server does not return . and .. directory entries. This results in the smb2 code path erroneously skipping the 2 first entries. Pseudo-code of the readdir() code path: cifs_readdir(struct file, struct dir_context) initiate_cifs_search <-- if no reponse cached yet server->ops->query_dir_first dir_emit_dots dir_emit <-- adds "." and ".." if we're at pos=0 find_cifs_entry initiate_cifs_search <-- if pos < start of current response (restart search) server->ops->query_dir_next <-- if pos > end of current response (fetch next search res) for(...) <-- loops over cur response entries starting at pos cifs_filldir <-- skip . and .., emit entry cifs_fill_dirent dir_emit pos++ A) dir_emit_dots() always adds . & .. and sets the current dir pos to 2 (0 and 1 are done). Therefore we always want the index_to_find to be 2 regardless of if the response has . and .. B) smb1 code initializes index_of_last_entry with a +2 offset in cifssmb.c CIFSFindFirst(): psrch_inf->index_of_last_entry = 2 /* skip . and .. */ + psrch_inf->entries_in_buffer; Later in find_cifs_entry() we want to find the next dir entry at pos=2 as a result of (A) first_entry_in_buffer = cfile->srch_inf.index_of_last_entry - cfile->srch_inf.entries_in_buffer; This var is the dir pos that the first entry in the buffer will have therefore it must be 2 in the first call. If we don't offset index_of_last_entry by 2 (like in (B)), first_entry_in_buffer=0 but we were instructed to get pos=2 so this code in find_cifs_entry() skips the 2 first which is ok for non-root shares, as it skips . and .. from the response but is not ok for root shares where the 2 first are actual files pos_in_buf = index_to_find - first_entry_in_buffer; // pos_in_buf=2 // we skip 2 first response entries :( for (i = 0; (i < (pos_in_buf)) && (cur_ent != NULL); i++) { /* go entry by entry figuring out which is first */ cur_ent = nxt_dir_entry(cur_ent, end_of_smb, cfile->srch_inf.info_level); } C) cifs_filldir() skips . and .. so we can safely ignore them for now. Sample program: int main(int argc, char **argv) { const char *path = argc >= 2 ? argv[1] : "."; DIR *dh; struct dirent *de; printf("listing path <%s>\n", path); dh = opendir(path); if (!dh) { printf("opendir error %d\n", errno); return 1; } while (1) { de = readdir(dh); if (!de) { if (errno) { printf("readdir error %d\n", errno); return 1; } printf("end of listing\n"); break; } printf("off=%lu <%s>\n", de->d_off, de->d_name); } return 0; } Before the fix with SMB1 on root shares: <.> off=1 <..> off=2 <$Recycle.Bin> off=3 <bootmgr> off=4 and on non-root shares: <.> off=1 <..> off=4 <-- after adding .., the offsets jumps to +2 because <2536> off=5 we skipped . and .. from response buffer (C) <411> off=6 but still incremented pos <file> off=7 <fsx> off=8 Therefore the fix for smb2 is to mimic smb1 behaviour and offset the index_of_last_entry by 2. Test results comparing smb1 and smb2 before/after the fix on root share, non-root shares and on large directories (ie. multi-response dir listing): PRE FIX ======= pre-1-root VS pre-2-root: ERR pre-2-root is missing [bootmgr, $Recycle.Bin] pre-1-nonroot VS pre-2-nonroot: OK~ same files, same order, different offsets pre-1-nonroot-large VS pre-2-nonroot-large: OK~ same files, same order, different offsets POST FIX ======== post-1-root VS post-2-root: OK same files, same order, same offsets post-1-nonroot VS post-2-nonroot: OK same files, same order, same offsets post-1-nonroot-large VS post-2-nonroot-large: OK same files, same order, same offsets REGRESSION? =========== pre-1-root VS post-1-root: OK same files, same order, same offsets pre-1-nonroot VS post-1-nonroot: OK same files, same order, same offsets BugLink: https://bugzilla.samba.org/show_bug.cgi?id=13107Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Paulo Alcantara <palcantara@suse.deR> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Josh Abraham authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 4dca864b ] This patch removes duplicate macro useage in events_base.c. It also fixes gcc warning: variable ‘col’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Joshua Abraham <j.abraham1776@gmail.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Olaf Hering authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 3366cdb6 ] The command 'xl vcpu-set 0 0', issued in dom0, will crash dom0: BUG: unable to handle kernel NULL pointer dereference at 00000000000002d8 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 65 Comm: xenwatch Not tainted 4.19.0-rc2-1.ga9462db-default #1 openSUSE Tumbleweed (unreleased) Hardware name: Intel Corporation S5520UR/S5520UR, BIOS S5500.86B.01.00.0050.050620101605 05/06/2010 RIP: e030:device_offline+0x9/0xb0 Code: 77 24 00 e9 ce fe ff ff 48 8b 13 e9 68 ff ff ff 48 8b 13 e9 29 ff ff ff 48 8b 13 e9 ea fe ff ff 90 66 66 66 66 90 41 54 55 53 <f6> 87 d8 02 00 00 01 0f 85 88 00 00 00 48 c7 c2 20 09 60 81 31 f6 RSP: e02b:ffffc90040f27e80 EFLAGS: 00010203 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff8801f3800000 RSI: ffffc90040f27e70 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffff820e47b3 R09: 0000000000000000 R10: 0000000000007ff0 R11: 0000000000000000 R12: ffffffff822e6d30 R13: dead000000000200 R14: dead000000000100 R15: ffffffff8158b4e0 FS: 00007ffa595158c0(0000) GS:ffff8801f39c0000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002d8 CR3: 00000001d9602000 CR4: 0000000000002660 Call Trace: handle_vcpu_hotplug_event+0xb5/0xc0 xenwatch_thread+0x80/0x140 ? wait_woken+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x3a/0x50 This happens because handle_vcpu_hotplug_event is called twice. In the first iteration cpu_present is still true, in the second iteration cpu_present is false which causes get_cpu_device to return NULL. In case of cpu#0, cpu_online is apparently always true. Fix this crash by checking if the cpu can be hotplugged, which is false for a cpu that was just removed. Also check if the cpu was actually offlined by device_remove, otherwise leave the cpu_present state as it is. Rearrange to code to do all work with device_hotplug_lock held. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Reviewed-by:
-
Vitaly Kuznetsov authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 87dffe86 ] When guest receives a sysrq request from the host it acknowledges it by writing '\0' to control/sysrq xenstore node. This, however, make xenstore watch fire again but xenbus_scanf() fails to parse empty value with "%c" format string: sysrq: SysRq : Emergency Sync Emergency Sync complete xen:manage: Error -34 reading sysrq code in control/sysrq Ignore -ERANGE the same way we already ignore -ENOENT, empty value in control/sysrq is totally legal. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 097f5863 ] We need to verify that the "data_offset" is within bounds. Reported-by:
Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 0ac1487c ] For inbound data with an unsupported HW header format, only dump the actual HW header. We have no idea how much payload follows it, and what it contains. Worst case, we dump past the end of the Inbound Buffer and access whatever is located next in memory. Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 6ad56901 ] After system suspend, sometimes the r8169 doesn't work when ethernet cable gets pluggued. This issue happens because rtl_reset_work() doesn't get called from rtl8169_runtime_resume(), after system suspend. In rtl_task(), RTL_FLAG_TASK_* only gets cleared if this condition is met: if (!netif_running(dev) || !test_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags)) ... If RTL_FLAG_TASK_ENABLED was cleared during system suspend while RTL_FLAG_TASK_RESET_PENDING was set, the next rtl_schedule_task() won't schedule task as the flag is still there. So in addition to clearing RTL_FLAG_TASK_ENABLED, also clears other flags. Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Miguel Ojeda authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 13aceef0 ] All other uses of "asm goto" go through asm_volatile_goto, which avoids a miscompile when using GCC < 4.8.2. Replace our open-coded "asm goto" statements with the asm_volatile_goto macro to avoid issues with older toolchains. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 5c41aaad ] Building drivers/mtd/nand/raw/nandsim.c on arch/hexagon/ produces a printk format build warning. This is due to hexagon's ffs() being coded as returning long instead of int. Fix the printk format warning by changing all of hexagon's ffs() and fls() functions to return int instead of long. The variables that they return are already int instead of long. This return type matches the return type in <asm-generic/bitops/>. ../drivers/mtd/nand/raw/nandsim.c: In function 'init_nandsim': ../drivers/mtd/nand/raw/nandsim.c:760:2: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'long int' [-Wformat] There are no ffs() or fls() allmodconfig build errors after making this change. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-hexagon@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Patch-mainline: linux-kernel @ 07/22/2018, 16:03 Signed-off-by:
Richard Kuo <rkuo@codeaurora.org> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 200f351e ] Fix build warning in arch/hexagon/kernel/dma.c by casting a void * to unsigned long to match the function parameter type. ../arch/hexagon/kernel/dma.c: In function 'arch_dma_alloc': ../arch/hexagon/kernel/dma.c:51:5: warning: passing argument 2 of 'gen_pool_add' makes integer from pointer without a cast [enabled by default] ../include/linux/genalloc.h:112:19: note: expected 'long unsigned int' but argument is of type 'void *' Signed-off-by:
-
Joe Thornber authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 3ab91828 ] Committing a transaction can consume some metadata of it's own, we now reserve a small amount of metadata to cover this. Free metadata reported by the kernel will not include this reserve. If any of the reserve has been used after a commit we enter a new internal state PM_OUT_OF_METADATA_SPACE. This is reported as PM_READ_ONLY, so no userland changes are needed. If the metadata device is resized the pool will move back to PM_WRITE. These changes mean we never need to abort and rollback a transaction due to running out of metadata space. This is particularly important because there have been a handful of reports of data corruption against DM thin-provisioning that can all be attributed to the thin-pool having ran out of metadata space. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
