Instead of using ifdef in the C file.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Yotam Gigi <yotamg@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use ARRAY_SIZE macro, rather than explicitly coding some variant of it
yourself.
Found with: find -type f -name "*.c" -o -name "*.h" | xargs perl -p -i -e
's/\bsizeof\s*\(\s*(\w+)\s*\)\s*\ /\s*sizeof\s*\(\s*\1\s*\[\s*0\s*\]\s*\)
/ARRAY_SIZE(\1)/g' and manual check/verification.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
flow_dissector: Flow dissector fixes

This patch set fixes some basic issues with __skb_flow_dissect function.

Items addressed:
  - Cleanup control flow in the function; in particular eliminate a
    bunch of goto's and implement a simplified control flow model
  - Add limits for number of encapsulations and headers that can be
    dissected

v2:
  - Simplify the logic for limits on flow dissection. Just set the
    limit based on the number of headers the flow dissector can
    processes. The accounted headers includes encapsulation headers,
    extension headers, or other shim headers.

Tested:

Ran normal traffic, GUE, and VXLAN traffic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In flow dissector there are no limits to the number of nested
encapsulations or headers that might be dissected which makes for a
nice DOS attack. This patch sets a limit of the number of headers
that flow dissector will parse.

Headers includes network layer headers, transport layer headers, shim
headers for encapsulation, IPv6 extension headers, etc. The limit for
maximum number of headers to parse has be set to fifteen to account for
a reasonable number of encapsulations, extension headers, VLAN,
in a packet. Note that this limit does not supercede the STOP_AT_*
flags which may stop processing before the headers limit is reached.
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

__skb_flow_dissect is riddled with gotos that make discerning the flow,
debugging, and extending the capability difficult. This patch
reorganizes things so that we only perform goto's after the two main
switch statements (no gotos within the cases now). It also eliminates
several goto labels so that there are only two labels that can be target
for goto.
Reported-by: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

A header file cleanup apparently caused a build regression
with one driver using the knav infrastructure:

In file included from drivers/net/ethernet/ti/netcp_core.c:30:0:
include/linux/soc/ti/knav_dma.h:129:30: error: field 'direction' has incomplete type
  enum dma_transfer_direction direction;
                              ^~~~~~~~~
drivers/net/ethernet/ti/netcp_core.c: In function 'netcp_txpipe_open':
drivers/net/ethernet/ti/netcp_core.c:1349:21: error: 'DMA_MEM_TO_DEV' undeclared (first use in this function); did you mean 'DMA_MEMORY_MAP'?
  config.direction = DMA_MEM_TO_DEV;
                     ^~~~~~~~~~~~~~
                     DMA_MEMORY_MAP
drivers/net/ethernet/ti/netcp_core.c:1349:21: note: each undeclared identifier is reported only once for each function it appears in
drivers/net/ethernet/ti/netcp_core.c: In function 'netcp_setup_navigator_resources':
drivers/net/ethernet/ti/netcp_core.c:1659:22: error: 'DMA_DEV_TO_MEM' undeclared (first use in this function); did you mean 'DMA_DESC_HOST'?
  config.direction  = DMA_DEV_TO_MEM;

As the header is no longer included implicitly through netdevice.h,
we should include it in the header that references the enum.

Fixes: 0dd5759d ("net: remove dmaengine.h inclusion from netdevice.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get a new link error in allmodconfig kernels after ftgmac100
started using the ncsi helpers:

ERROR: "ncsi_vlan_rx_kill_vid" [drivers/net/ethernet/faraday/ftgmac100.ko] undefined!
ERROR: "ncsi_vlan_rx_add_vid" [drivers/net/ethernet/faraday/ftgmac100.ko] undefined!

Related to that, we get another error when CONFIG_NET_NCSI is disabled:

drivers/net/ethernet/faraday/ftgmac100.c:1626:25: error: 'ncsi_vlan_rx_add_vid' undeclared here (not in a function); did you mean 'ncsi_start_dev'?
drivers/net/ethernet/faraday/ftgmac100.c:1627:26: error: 'ncsi_vlan_rx_kill_vid' undeclared here (not in a function); did you mean 'ncsi_vlan_rx_add_vid'?

This fixes both problems at once, using a 'static inline' stub helper
for the disabled case, and exporting the functions when they are present.

Fixes: 51564585 ("ftgmac100: Support NCSI VLAN filtering when available")
Fixes: 21acf630 ("net/ncsi: Configure VLAN tag filter")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller reported crashes in bpf map creation or map update [1]

Problem is that nr_node_ids is a signed integer,
NUMA_NO_NODE is also an integer, so it is very tempting
to declare numa_node as a signed integer.

This means the typical test to validate a user provided value :

        if (numa_node != NUMA_NO_NODE &&
            (numa_node >= nr_node_ids ||
             !node_online(numa_node)))

must be written :

        if (numa_node != NUMA_NO_NODE &&
            ((unsigned int)numa_node >= nr_node_ids ||
             !node_online(numa_node)))

[1]
kernel BUG at mm/slab.c:3256!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 2946 Comm: syzkaller916108 Not tainted 4.13.0-rc7+ #35
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801d2bc60c0 task.stack: ffff8801c0c90000
RIP: 0010:____cache_alloc_node+0x1d4/0x1e0 mm/slab.c:3292
RSP: 0018:ffff8801c0c97638 EFLAGS: 00010096
RAX: ffffffffffff8b7b RBX: 0000000001080220 RCX: 0000000000000000
RDX: 00000000ffff8b7b RSI: 0000000001080220 RDI: ffff8801dac00040
RBP: ffff8801c0c976c0 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8801c0c97620 R11: 0000000000000001 R12: ffff8801dac00040
R13: ffff8801dac00040 R14: 0000000000000000 R15: 00000000ffff8b7b
FS:  0000000002119940(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020001fec CR3: 00000001d2980000 CR4: 00000000001406f0
Call Trace:
 __do_kmalloc_node mm/slab.c:3688 [inline]
 __kmalloc_node+0x33/0x70 mm/slab.c:3696
 kmalloc_node include/linux/slab.h:535 [inline]
 alloc_htab_elem+0x2a8/0x480 kernel/bpf/hashtab.c:740
 htab_map_update_elem+0x740/0xb80 kernel/bpf/hashtab.c:820
 map_update_elem kernel/bpf/syscall.c:587 [inline]
 SYSC_bpf kernel/bpf/syscall.c:1468 [inline]
 SyS_bpf+0x20c5/0x4c40 kernel/bpf/syscall.c:1443
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x440409
RSP: 002b:00007ffd1f1792b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440409
RDX: 0000000000000020 RSI: 0000000020006000 RDI: 0000000000000002
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401d70
R13: 0000000000401e00 R14: 0000000000000000 R15: 0000000000000000
Code: 83 c2 01 89 50 18 4c 03 70 08 e8 38 f4 ff ff 4d 85 f6 0f 85 3e ff ff ff 44 89 fe 4c 89 ef e8 94 fb ff ff 49 89 c6 e9 2b ff ff ff <0f> 0b 0f 0b 0f 0b 66 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RIP: ____cache_alloc_node+0x1d4/0x1e0 mm/slab.c:3292 RSP: ffff8801c0c97638
---[ end trace d745f355da2e33ce ]---
Kernel panic - not syncing: Fatal exception

Fixes: 96eabe7a ("bpf: Allow selecting numa node during map creation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for next-net (part 2)

The following patchset contains Netfilter updates for net-next. This
patchset includes updates for nf_tables, removal of
CONFIG_NETFILTER_DEBUG and a new mode for xt_hashlimit. More
specifically, they:

1) Add new rate match mode for hashlimit, this introduces a new revision
   for this match. The idea is to stop matching packets until ratelimit
   criteria stands true. Patch from Vishwanath Pai.

2) Add ->select_ops indirection to nf_tables named objects, so we can
   choose between different flavours of the same object type, patch from
   Pablo M. Bermudo.

3) Shorter function names in nft_limit, basically:
   s/nft_limit_pkt_bytes/nft_limit_bytes, also from Pablo M. Bermudo.

4) Add new stateful limit named object type, this allows us to create
   limit policies that you can identify via name, also from Pablo.

5) Remove unused hooknum parameter in conntrack ->packet indirection.
   From Florian Westphal.

6) Patches to remove CONFIG_NETFILTER_DEBUG and macros such as
   IP_NF_ASSERT and IP_NF_ASSERT. From Varsha Rao.

7) Add nf_tables_updchain() helper function and use it from
   nf_tables_newchain() to make it more maintainable. Similarly,
   add nf_tables_addchain() and use it too.

8) Add new netlink NLM_F_NONREC flag, this flag should only be used for
   deletion requests, specifically, to support non-recursive deletion.
   Based on what we discussed during NFWS'17 in Faro.

9) Use NLM_F_NONREC from table and sets in nf_tables.

10) Support for recursive chain deletion. Table and set deletion
    commands come with an implicit content flush on deletion, while
    chains do not. This patch addresses this inconsistency by adding
    the code to perform recursive chain deletions. This also comes with
    the bits to deal with the new NLM_F_NONREC netlink flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch sorts out an asymmetry in deletions. Currently, table and set
deletion commands come with an implicit content flush on deletion.
However, chain deletion results in -EBUSY if there is content in this
chain, so no implicit flush happens. So you have to send a flush command
in first place to delete chains, this is inconsistent and it can be
annoying in terms of user experience.

This patch uses the new NLM_F_NONREC flag to request non-recursive chain
deletion, ie. if the chain to be removed contains rules, then this
returns EBUSY. This problem was discussed during the NFWS'17 in Faro,
Portugal. In iptables, you hit -EBUSY if you try to delete a chain that
contains rules, so you have to flush first before you can remove
anything. Since iptables-compat uses the nf_tables netlink interface, it
has to use the NLM_F_NONREC flag from userspace to retain the original
iptables semantics, ie.  bail out on removing chains that contain rules.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Bail out if user requests non-recursive deletion for tables and sets.
This new flags tells nf_tables netlink interface to reject deletions if
tables and sets have content.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In the last NFWS in Faro, Portugal, we discussed that netlink is lacking
the semantics to request non recursive deletions, ie. do not delete an
object iff it has child objects that hang from this parent object that
the user requests to be deleted.

We need this new flag to solve a problem for the iptables-compat
backward compatibility utility, that runs iptables commands using the
existing nf_tables netlink interface. Specifically, custom chains in
iptables cannot be deleted if there are rules in it, however, nf_tables
allows to remove any chain that is populated with content. To sort out
this asymmetry, iptables-compat userspace sets this new NLM_F_NONREC
flag to obtain the same semantics that iptables provides.

This new flag should only be used for deletion requests. Note this new
flag value overlaps with the existing:

* NLM_F_ROOT for get requests.
* NLM_F_REPLACE for new requests.

However, those flags should not ever be used in deletion requests.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Wrap the chain addition path in a function to make it more maintainable.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

nf_tables_newchain() is too large, wrap the chain update path in a
function to make it more maintainable.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch removes CONFIG_NETFILTER_DEBUG and _ASSERT() macros as they
are no longer required. Replace _ASSERT() macros with WARN_ON().
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch removes NF_CT_ASSERT() and instead uses WARN_ON().
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>

tested with allmodconfig build.
Signed-off-by: Florian Westphal <fw@strlen.de>

Register a new limit stateful object type into the stateful object
infrastructure.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Just a small refactor patch in order to improve the code readability.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds support for overloading stateful objects operations
through the select_ops() callback, just as it is implemented for
expressions.

This change is needed for upcoming additions to the stateful objects
infrastructure.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds a new feature to hashlimit that allows matching on the
current packet/byte rate without rate limiting. This can be enabled
with a new flag --hashlimit-rate-match. The match returns true if the
current rate of packets is above/below the user specified value.

The main difference between the existing algorithm and the new one is
that the existing algorithm rate-limits the flow whereas the new
algorithm does not. Instead it *classifies* the flow based on whether
it is above or below a certain rate. I will demonstrate this with an
example below. Let us assume this rule:

iptables -A INPUT -m hashlimit --hashlimit-above 10/s -j new_chain

If the packet rate is 15/s, the existing algorithm would ACCEPT 10
packets every second and send 5 packets to "new_chain".

But with the new algorithm, as long as the rate of 15/s is sustained,
all packets will continue to match and every packet is sent to new_chain.

This new functionality will let us classify different flows based on
their current rate, so that further decisions can be made on them based on
what the current rate is.

This is how the new algorithm works:
We divide time into intervals of 1 (sec/min/hour) as specified by
the user. We keep track of the number of packets/bytes processed in the
current interval. After each interval we reset the counter to 0.

When we receive a packet for match, we look at the packet rate
during the current interval and the previous interval to make a
decision:

if [ prev_rate < user and cur_rate < user ]
        return Below
else
        return Above

Where cur_rate is the number of packets/bytes seen in the current
interval, prev is the number of packets/bytes seen in the previous
interval and 'user' is the rate specified by the user.

We also provide flexibility to the user for choosing the time
interval using the option --hashilmit-interval. For example the user can
keep a low rate like x/hour but still keep the interval as small as 1
second.

To preserve backwards compatibility we have to add this feature in a new
revision, so I've created revision 3 for hashlimit. The two new options
we add are:

--hashlimit-rate-match
--hashlimit-rate-interval

I have updated the help text to add these new options. Also added a few
tests for the new options.
Suggested-by: Igor Lubashev <ilubashe@akamai.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2017-09-03

Here's one last bluetooth-next pull request for the 4.14 kernel:

 - NULL pointer fix in ca8210 802.15.4 driver
 - A few "const" fixes
 - New Kconfig option for disabling legacy interfaces

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Subash Abhinov Kasiviswanathan says:

====================
net: qualcomm: rmnet: Fix comments on initial patchset

This series fixes the comments from Dan on the first patch series.

Fixes a memory corruption which could occur if mux_id was higher than 32.
Remove the RMNET_LOCAL_LOGICAL_ENDPOINT which is no longer used.
Make a log message more useful.
Combine __rmnet_set_endpoint_config() with rmnet_set_endpoint_config().
Set the mux_id in rmnet_vnd_newlink().
Set the ingress and egress data format directly in newlink.
Implement ndo_get_iflink to find the real_dev.
Rename the real_dev_info to port to make it similar to other drivers.

The conversion of rmnet_devices to a list and hash lookup will be sent
as part of a seperate patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make it similar to drivers like ipvlan / macvlan so it is easier to read.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This makes it easier to find out the parent dev.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Data format can be directly set from rmnet_newlink() since the
rmnet real dev info is already available.

Since __rmnet_get_real_dev_info() is no longer used in rmnet_config.c
after removal of those functions, move content to
rmnet_get_real_dev_info().

__rmnet_set_endpoint_config() is collapsed into
rmnet_set_endpoint_config() since only mux_id was being set additionally
within it. Remove an unnecessary mux_id check.

Set the mux_id for the rmnet_dev within rmnet_vnd_newlink() itself.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current log is not very useful as it does not log the device
name since it it is prior to registration -

(unnamed net_device) (uninitialized): Setting up device

Modify to log after the device registration -

rmnet1: rmnet dev created
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This was used only in the original patch series where the IOCTLs were
present and is no longer in use.

Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rmnet_rtnl_validate() was checking for upto mux_id 254, however the
rmnet_devices devices could hold upto 32 entries only. Fix this by
increasing the size of the rmnet_devices.

Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: refactor app init, and minor flower fixes

This series is a part 2 to what went into net as a simpler fix.
In net we simply moved when existing callbacks are invoked to
ensure flower app does not still use representors when lower
netdev has already been destroyed.  In this series we add a
callback to notify apps when vNIC netdevs are fully initialized
and they are about to be destroyed.  This allows flower to spawn
representors at the right time, while keeping the start/stop
callbacks for what they are intended to be used - FW initialization
over control channel.

Patch 4 improves drop monitor interaction and patch 5 changes
the default Kconfig selection of flower offload.  Patch 6 fixes
locking around representor updates which got lost in net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When we moved to updating representors from a workqueue grabbing
the RTNL somehow got lost in the process.  Restore it, and make
sure RCU lock is not held while we are grabbing the RTNL.  RCU
protects the representor table, so since we will be under RTNL
we can drop RCU lock as soon as we find the netdev pointer.
RTNL is needed for the dev_set_mtu() call.

Fixes: 2dff1962 ("nfp: process MTU updates from firmware flower app")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's reasonable to assume that if user selects to build the NFP
driver all offload capabilities will be enabled by default.
Change the CONFIG_NFP_APP_FLOWER to default to enabled.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dev_consume_skb_any() in place of dev_kfree_skb_any()
when control frame has been successfully processed in flower
and on the driver's main TX completion path.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since representors are now created with a separate callback
start/stop app callbacks can be moved again to their original
location.  They are intended to app-specific init/clean up
over the control channel.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create representors after lower vNIC is registered and destroy
them before it is destroyed.  Move the code out of start/stop
callbacks directly into vnic_init/clean callbacks.  Make sure
SR-IOV callbacks don't try to create representors when lower
device does not exist.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently only have one app callback for vNIC creation
and destruction.  This is insufficient, because some actions
have to be taken before netdev is registered, after it's
registered and after it's unregistered.  Old callbacks
were really corresponding to alloc/free actions.  Rename
them and add proper init/clean.  Apps using representors
will be able to use new callbacks to manage lifetime of
upper devices.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2017-09-03

This series from Tariq includes micro data path optimization for mlx5e
netdevice driver.

Mainly Tariq introduces the following changes to NAPI and RX handling
path of the driver:
 - RX ring structure reorganizing
 - Trivial code refactoring and optimization
 - NAPI busy-poll for when fast UMR is in progress
 - Non-atomic state operations in NAPI context
 - Remove unnecessary fields from fast path structures
 - page-cache micro optimization
 - Rely on NAPI to avoid missing an IRQ for RX/TX shared NAPI contexts
 - Stop NAPI when irq changes affinity
 - Distribute RSS table among all RX rings
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Offloading GRE tunnels

Petr says:

This patch series introduces to mlxsw driver support for offloading
IP-in-IP tunnels in general, and for (subset of) GRE in particular.

This patchset supports two ways of configuring GRE:

- So called "hierarchical configuration", where the GRE device has a bound
  dummy device, which is in a different VRF. The VRF with host traffic is
  called "overlay", the one with encapsulated traffic is called "underlay".

- So called "flat configuration", where the GRE device doesn't have a bound
  device, and overlay and underlay are both in the same VRF (possibly the
  default one).

Two routes are then interesting: a route that directs traffic to a GRE
device (which would typically be in overlay VRF, but could be in another
one), and a local route for the tunnel's local address (in underlay).
Handling of these two route types is then introduced as patches to support,
respectively, IPv4 and IPv6 encapsulation and IPv4 decapsulation.

The encap and decap routes then reference a loopback device, a new type of
RIF introduced by this patchset for the specific use of offloading tunnels.

The encap and decap code is abstract with respect to the particulars of
individual L3 tunnel types. This patchset introduces support for GRE
tunnels in particular.

Limitations:

- Each tunnel needs to have a different local address (within a given VRF).
  When two tunnels are used that are in conflict, FIB abort is triggered
  and the driver ceases offloading FIBs. Full handling of such
  configurations needs special setup in the hardware, such that the tunnels
  that share an address are dispatched correctly according to their key (or
  lack thereof). That's currently not implemented, and to keep things
  deterministic, the driver triggers FIB abort.

- A next hop that uses an incompletely-specified tunnel (e.g. such that are
  used for LWT) is not offloaded, but doesn't trigger FIB abort like the
  above. If such routes end up being in a de facto conflict with other
  tunnels, then if there already is an offload for that address, the
  traffic for the conflicting tunnel will end up mismatching the
  configuration of the offloaded tunnel, and thus gets to slow path through
  an error trap.

- GRE checksumming and sequence numbers are not supported and TTL and TOS
  need to be set to inherit. Tunnels with a different configuration are not
  offloaded and their traffic is trapping to slow path.

  Note in particular that TOS of inherit is not the default configuration
  and needs to be explicitly specified when the tunnel is created.

- The only feature that is not graciously handled is that if a change is
  made to the tunnel, e.g. through "ip tunnel change", such changes are not
  reflected in the driver. There is currently no notification mechanism for
  these changes. Introduction of this mechanism and its leverage in the
  driver will be subject of follow-up work. For now this limitation can be
  worked around by removing and re-adding the encap route.

---
v1->v2:
-fix order of patch 5
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch introduces callbacks and tunnel type to offload GRE tunnels.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct mlxsw_sp_rif is a router-private structure, and therefore
everything related to it is as well: parameters, and derived RIF types
including loopbacks. IPIP module needs access to some details of
loopback interfaces, but exporting all the RIF shebang would create too
large an interface.

So instead export just the bare minimum necessary: accessors for RIF
index and underlay VRF ID.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>