- 29 Apr, 2013 40 commits
-
-
Yijing Wang authored
CONFIG_HOTPLUG is going away as an option, cleanup CONFIG_HOTPLUG ifdefs in mm files. Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
Just a trivial issue I stumbled on while doing something else... Signed-off-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
-
Andrew Shewmaker authored
Alter the admin and user reserves of the previous patches in this series when memory is added or removed. If memory is added and the reserves have been eliminated or increased above the default max, then we'll trust the admin. If memory is removed and there isn't enough free memory, then we need to reset the reserves. Otherwise keep the reserve set by the admin. The reserve reset code is the same as the reserve initialization code. I tested hot addition and removal by triggering it via sysfs. The reserves shrunk when they were set high and memory was removed. They were reset higher when memory was added again. [akpm@linux-foundation.org: use register_hotmemory_notifier()] [akpm@linux-foundation.org: init_user_reserve() and init_admin_reserve can no longer be __meminit] [fengguang.wu@intel.com: make init_reserve_notifier() static] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Andrew Shewmaker <agshew@gmail.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Andrew Shewmaker authored
Add an admin_reserve_kbytes knob to allow admins to change the hardcoded memory reserve to something other than 3%, which may be multiple gigabytes on large memory systems. Only about 8MB is necessary to enable recovery in the default mode, and only a few hundred MB are required even when overcommit is disabled. This affects OVERCOMMIT_GUESS and OVERCOMMIT_NEVER. admin_reserve_kbytes is initialized to min(3% free pages, 8MB) I arrived at 8MB by summing the RSS of sshd or login, bash, and top. Please see first patch in this series for full background, motivation, testing, and full changelog. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make init_admin_reserve() static] Signed-off-by:
-
Andrew Shewmaker authored
Add user_reserve_kbytes knob. Limit the growth of the memory reserved for other user processes to min(3% current process size, user_reserve_pages). Only about 8MB is necessary to enable recovery in the default mode, and only a few hundred MB are required even when overcommit is disabled. user_reserve_pages defaults to min(3% free pages, 128MB) I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ... then adding the RSS of each. This only affects OVERCOMMIT_NEVER mode. Background 1. user reserve __vm_enough_memory reserves a hardcoded 3% of the current process size for other applications when overcommit is disabled. This was done so that a user could recover if they launched a memory hogging process. Without the reserve, a user would easily run into a message such as: bash: fork: Cannot allocate memory 2. admin reserve Additionally, a hardcoded 3% of free memory is reserved for root in both overcommit 'guess' and 'never' modes. This was intended to prevent a scenario where root-cant-log-in and perform recovery operations. Note that this reserve shrinks, and doesn't guarantee a useful reserve. Motivation The two hardcoded memory reserves should be updated to account for current memory sizes. Also, the admin reserve would be more useful if it didn't shrink too much. When the current code was originally written, 1GB was considered "enterprise". Now the 3% reserve can grow to multiple GB on large memory systems, and it only needs to be a few hundred MB at most to enable a user or admin to recover a system with an unwanted memory hogging process. I've found that reducing these reserves is especially beneficial for a specific type of application load: * single application system * one or few processes (e.g. one per core) * allocating all available memory * not initializing every page immediately * long running I've run scientific clusters with this sort of load. A long running job sometimes failed many hours (weeks of CPU time) into a calculation. They weren't initializing all of their memory immediately, and they weren't using calloc, so I put systems into overcommit 'never' mode. These clusters run diskless and have no swap. However, with the current reserves, a user wishing to allocate as much memory as possible to one process may be prevented from using, for example, almost 2GB out of 32GB. The effect is less, but still significant when a user starts a job with one process per core. I have repeatedly seen a set of processes requesting the same amount of memory fail because one of them could not allocate the amount of memory a user would expect to be able to allocate. For example, Message Passing Interfce (MPI) processes, one per core. And it is similar for other parallel programming frameworks. Changing this reserve code will make the overcommit never mode more useful by allowing applications to allocate nearly all of the available memory. Also, the new admin_reserve_kbytes will be safer than the current behavior since the hardcoded 3% of available memory reserve can shrink to something useless in the case where applications have grabbed all available memory. Risks * "bash: fork: Cannot allocate memory" The downside of the first patch-- which creates a tunable user reserve that is only used in overcommit 'never' mode--is that an admin can set it so low that a user may not be able to kill their process, even if they already have a shell prompt. Of course, a user can get in the same predicament with the current 3% reserve--they just have to launch processes until 3% becomes negligible. * root-cant-log-in problem The second patch, adding the tunable rootuser_reserve_pages, allows the admin to shoot themselves in the foot by setting it too small. They can easily get the system into a state where root-can't-log-in. However, the new admin_reserve_kbytes will be safer than the current behavior since the hardcoded 3% of available memory reserve can shrink to something useless in the case where applications have grabbed all available memory. Alternatives * Memory cgroups provide a more flexible way to limit application memory. Not everyone wants to set up cgroups or deal with their overhead. * We could create a fourth overcommit mode which provides smaller reserves. The size of useful reserves may be drastically different depending on the whether the system is embedded or enterprise. * Force users to initialize all of their memory or use calloc. Some users don't want/expect the system to overcommit when they malloc. Overcommit 'never' mode is for this scenario, and it should work well. The new user and admin reserve tunables are simple to use, with low overhead compared to cgroups. The patches preserve current behavior where 3% of memory is less than 128MB, except that the admin reserve doesn't shrink to an unusable size under pressure. The code allows admins to tune for embedded and enterprise usage. FAQ * How is the root-cant-login problem addressed? What happens if admin_reserve_pages is set to 0? Root is free to shoot themselves in the foot by setting admin_reserve_kbytes too low. On x86_64, the minimum useful reserve is: 8MB for overcommit 'guess' 128MB for overcommit 'never' admin_reserve_pages defaults to min(3% free memory, 8MB) So, anyone switching to 'never' mode needs to adjust admin_reserve_pages. * How do you calculate a minimum useful reserve? A user or the admin needs enough memory to login and perform recovery operations, which includes, at a minimum: sshd or login + bash (or some other shell) + top (or ps, kill, etc.) For overcommit 'guess', we can sum resident set sizes (RSS) because we only need enough memory to handle what the recovery programs will typically use. On x86_64 this is about 8MB. For overcommit 'never', we can take the max of their virtual sizes (VSZ) and add the sum of their RSS. We use VSZ instead of RSS because mode forces us to ensure we can fulfill all of the requested memory allocations-- even if the programs only use a fraction of what they ask for. On x86_64 this is about 128MB. When swap is enabled, reserves are useful even when they are as small as 10MB, regardless of overcommit mode. When both swap and overcommit are disabled, then the admin should tune the reserves higher to be absolutley safe. Over 230MB each was safest in my testing. * What happens if user_reserve_pages is set to 0? Note, this only affects overcomitt 'never' mode. Then a user will be able to allocate all available memory minus admin_reserve_kbytes. However, they will easily see a message such as: "bash: fork: Cannot allocate memory" And they won't be able to recover/kill their application. The admin should be able to recover the system if admin_reserve_kbytes is set appropriately. * What's the difference between overcommit 'guess' and 'never'? "Guess" allows an allocation if there are enough free + reclaimable pages. It has a hardcoded 3% of free pages reserved for root. "Never" allows an allocation if there is enough swap + a configurable percentage (default is 50) of physical RAM. It has a hardcoded 3% of free pages reserved for root, like "Guess" mode. It also has a hardcoded 3% of the current process size reserved for additional applications. * Why is overcommit 'guess' not suitable even when an app eventually writes to every page? It takes free pages, file pages, available swap pages, reclaimable slab pages into consideration. In other words, these are all pages available, then why isn't overcommit suitable? Because it only looks at the present state of the system. It does not take into account the memory that other applications have malloced, but haven't initialized yet. It overcommits the system. Test Summary There was little change in behavior in the default overcommit 'guess' mode with swap enabled before and after the patch. This was expected. Systems run most predictably (i.e. no oom kills) in overcommit 'never' mode with swap enabled. This also allowed the most memory to be allocated to a user application. Overcommit 'guess' mode without swap is a bad idea. It is easy to crash the system. None of the other tested combinations crashed. This matches my experience on the Roadrunner supercomputer. Without the tunable user reserve, a system in overcommit 'never' mode and without swap does not allow the admin to recover, although the admin can. With the new tunable reserves, a system in overcommit 'never' mode and without swap can be configured to: 1. maximize user-allocatable memory, running close to the edge of recoverability 2. maximize recoverability, sacrificing allocatable memory to ensure that a user cannot take down a system Test Description Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap System is booted into multiuser console mode, with unnecessary services turned off. Caches were dropped before each test. Hogs are user memtester processes that attempt to allocate all free memory as reported by /proc/meminfo In overcommit 'never' mode, memory_ratio=100 Test Results 3.9.0-rc1-mm1 Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery ---------- ---- ---- ------------- ---- ------------- -------------- guess yes 1 5432/5432 no yes yes guess yes 4 5444/5444 1 yes yes guess no 1 5302/5449 no yes yes guess no 4 - crash no no never yes 1 5460/5460 1 yes yes never yes 4 5460/5460 1 yes yes never no 1 5218/5432 no no yes never no 4 5203/5448 no no yes 3.9.0-rc1-mm1-tunablereserves User and Admin Recovery show their respective reserves, if applicable. Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery ---------- ---- ---- ------------- ---- ------------- -------------- guess yes 1 5419/5419 no - yes 8MB yes guess yes 4 5436/5436 1 - yes 8MB yes guess no 1 5440/5440 * - yes 8MB yes guess no 4 - crash - no 8MB no * process would successfully mlock, then the oom killer would pick it never yes 1 5446/5446 no 10MB yes 20MB yes never yes 4 5456/5456 no 10MB yes 20MB yes never no 1 5387/5429 no 128MB no 8MB barely never no 1 5323/5428 no 226MB barely 8MB barely never no 1 5323/5428 no 226MB barely 8MB barely never no 1 5359/5448 no 10MB no 10MB barely never no 1 5323/5428 no 0MB no 10MB barely never no 1 5332/5428 no 0MB no 50MB yes never no 1 5293/5429 no 0MB no 90MB yes never no 1 5001/5427 no 230MB yes 338MB yes never no 4* 4998/5424 no 230MB yes 338MB yes * more memtesters were launched, able to allocate approximately another 100MB Future Work - Test larger memory systems. - Test an embedded image. - Test other architectures. - Time malloc microbenchmarks. - Would it be useful to be able to set overcommit policy for each memory cgroup? - Some lines are slightly above 80 chars. Perhaps define a macro to convert between pages and kb? Other places in the kernel do this. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make init_user_reserve() static] Signed-off-by: -
Andrew Morton authored
Use the new interface, remove one ifdef. No code size changes. We could/should have been using __meminit/__meminitdata here but there's now no point in doing that because all this code is elided at compile time. Cc: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Andrew Morton authored
Saves an ifdef, no code size changes Signed-off-by:
-
Andrew Morton authored
Squishes a warning which my change to hotplug_memory_notifier() added. I want to keep that warning, because it is punishment for failnig to check the hotplug_memory_notifier() return value. Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andrew Morton authored
Squishes a statement-with-no-effect warning, removes some ifdefs and shrinks .text by 2 bytes. Note that this code fails to check for blocking_notifier_chain_register() failures. Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Andrew Morton authored
Squishes a statement-with-no-effect warning, removes some ifdefs and shrinks .text by one byte! Note that this code fails to check for blocking_notifier_chain_register() failures. Signed-off-by:
-
Andrew Morton authored
When CONFIG_MEMORY_HOTPLUG=n, we don't want the memory-hotplug notifier handlers to be included in the .o files, for space reasons. The existing hotplug_memory_notifier() tries to handle this but testing with gcc-4.4.4 shows that it doesn't work - the hotplug functions are still present in the .o files. So implement a new register_hotmemory_notifier() which is a copy of register_hotcpu_notifier(), and which actually works as desired. hotplug_memory_notifier() and register_memory_notifier() callsites should be converted to use this new register_hotmemory_notifier(). While we're there, let's repair the existing hotplug_memory_notifier(): it simply stomps on the register_memory_notifier() return value, so well-behaved code cannot check for errors. Apparently non of the existing callers were well-behaved :( Cc: Andrew Shewmaker <agshew@gmail.com> Signed-off-by:
-
Cody P Schafer authored
[sfr@canb.auug.org.au: add missing semicolon] Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Cody P Schafer authored
powerpc and x86 were opencoding copies of setup_nr_node_ids(), which page_alloc provides but makes static. Make it avaliable to the archs in linux/mm.h. Signed-off-by:
-
Russ Anderson authored
When booting on a large memory system, the kernel spends considerable time in memmap_init_zone() setting up memory zones. Analysis shows significant time spent in __early_pfn_to_nid(). The routine memmap_init_zone() checks each PFN to verify the nid is valid. __early_pfn_to_nid() sequentially scans the list of pfn ranges to find the right range and returns the nid. This does not scale well. On a 4 TB (single rack) system there are 308 memory ranges to scan. The higher the PFN the more time spent sequentially spinning through memory ranges. Since memmap_init_zone() increments pfn, it will almost always be looking for the same range as the previous pfn, so check that range first. If it is in the same range, return that nid. If not, scan the list as before. A 4 TB (single rack) UV1 system takes 512 seconds to get through the zone code. This performance optimization reduces the time by 189 seconds, a 36% improvement. A 2 TB (single rack) UV2 system goes from 212.7 seconds to 99.8 seconds, a 112.9 second (53%) reduction. [akpm@linux-foundation.org: make the statics __meminitdata] [akpm@linux-foundation.org: fix comment formatting] [akpm@linux-foundation.org: fix ia64, per yinghai] [akpm@linux-foundation.org: add missing semicolon, per Tony] Signed-off-by:
Russ Anderson <rja@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Tested-by:
"Luck, Tony" <tony.luck@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Lin Feng <linfeng@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by:
-
Jianguo Wu authored
Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
-
Mel Gorman authored
The following problem was reported against a distribution kernel when zone_reclaim was enabled but the same problem applies to the mainline kernel. The reproduction case was as follows 1. Run numactl -m +0 dd if=largefile of=/dev/null This allocates a large number of clean pages in node 0 2. numactl -N +0 memhog 0.5*Mg This start a memory-using application in node 0. The expected behaviour is that the clean pages get reclaimed and the application uses node 0 for its memory. The observed behaviour was that the memory for the memhog application was allocated off-node since commits cd38b115 ("mm: page allocator: initialise ZLC for first zone eligible for zone_reclaim") and commit 76d3fbf8 ("mm: page allocator: reconsider zones for allocation after direct reclaim"). The assumption of those patches was that it was always preferable to allocate quickly than stall for long periods of time and they were meant to take care that the zone was only marked full when necessary but an important case was missed. In the allocator fast path, only the low watermarks are checked. If the zones free pages are between the low and min watermark then allocations from the allocators slow path will succeed. However, zone_reclaim will only reclaim SWAP_CLUSTER_MAX or 1<<order pages. There is no guarantee that this will meet the low watermark causing the zone to be marked full prematurely. This patch will only mark the zone full after zone_reclaim if it the min watermarks are checked or if page reclaim failed to make sufficient progress. [mhocko@suse.cz: fix alloc_flags test] Signed-off-by:
Mel Gorman <mgorman@suse.de> Reported-by:
Hedi Berriche <hedi@sgi.com> Tested-by:
Michal Hocko <mhocko@suse.cz> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by:
-
Johannes Weiner authored
Memory hotplug can happen on a machine under load, memory shortness and fragmentation, so huge page allocations for the vmemmap are not guaranteed to succeed. Try to fall back to regular pages before failing the hotplug event completely. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Johannes Weiner authored
We already have generic code to allocate vmemmap with regular pages, use it. Signed-off-by:
-
Johannes Weiner authored
No need to maintain addr_end and p_end when they are never actually read anywhere on !pse setups. Remove the dead code. Signed-off-by:
-
Johannes Weiner authored
The sparse code, when asking the architecture to populate the vmemmap, specifies the section range as a starting page and a number of pages. This is an awkward interface, because none of the arch-specific code actually thinks of the range in terms of 'struct page' units and always translates it to bytes first. In addition, later patches mix huge page and regular page backing for the vmemmap. For this, they need to call vmemmap_populate_basepages() on sub-section ranges with PAGE_SIZE and PMD_SIZE in mind. But these are not necessarily multiples of the 'struct page' size and so this unit is too coarse. Just translate the section range into bytes once in the generic sparse code, then pass byte ranges down the stack. Signed-off-by:
David S. Miller <davem@davemloft.net> Tested-by:
-
Ben Hutchings authored
Hot-adding memory on x86_64 normally requires huge page allocation. When this is done to a VM guest, it's usually because the system is already tight on memory, so the request tends to fail. Try to avoid this by adding __GFP_REPEAT to the allocation flags. Addresses http://bugs.debian.org/699913Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Bernhard Schmidt <Bernhard.Schmidt@lrz.de> Tested-by:
-
David Rientjes authored
Particularly in oom conditions, it's troublesome that hugetlb memory is not displayed. All other meminfo that is emitted will not add up to what is expected, and there is no artifact left in the kernel log to show that a potentially significant amount of memory is actually allocated as hugepages which are not available to be reclaimed. Booting with hugepages=8192 on the command line, this memory is now shown in oom conditions. For example, with echo m > /proc/sysrq-trigger: Node 0 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB Node 1 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB Node 2 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB Node 3 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Hampson, Steven T authored
Using mbind to change the mempolicy to MPOL_BIND on several adjacent mmapped blocks may result in a reset of the mempolicy to MPOL_DEFAULT in vma_adjust. Test code. Correct result is three lines containing "OK". #include <stdio.h> #include <unistd.h> #include <sys/mman.h> #include <numaif.h> #include <errno.h> /* gcc mbind_test.c -lnuma -o mbind_test -Wall */ #define MAXNODE 4096 void allocate() { int ret; int len; int policy = -1; unsigned char *p; unsigned long mask[MAXNODE] = { 0 }; unsigned long retmask[MAXNODE] = { 0 }; len = getpagesize() * 0x2fc00; p = mmap(NULL, len, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); if (p == MAP_FAILED) printf("mbind err: %d\n", errno); mask[0] = 1; ret = mbind(p, len, MPOL_BIND, mask, MAXNODE, 0); if (ret < 0) printf("mbind err: %d %d\n", ret, errno); ret = get_mempolicy(&policy, retmask, MAXNODE, p, MPOL_F_ADDR); if (ret < 0) printf("get_mempolicy err: %d %d\n", ret, errno); if (policy == MPOL_BIND) printf("OK\n"); else printf("ERROR: policy is %d\n", policy); } int main() { allocate(); allocate(); allocate(); return 0; } Signed-off-by:Steven T Hampson <steven.t.hampson@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Catalin Marinas authored
ARM processors with LPAE enabled use 3 levels of page tables, with an entry in the top level (pgd) covering 1GB of virtual space. Because of the branch relocation limitations on ARM, the loadable modules are mapped 16MB below PAGE_OFFSET, making the corresponding 1GB pgd shared between kernel modules and user space. If free_pgtables() is called with the default ceiling 0, free_pgd_range() (and subsequently called functions) also frees the page table shared between user space and kernel modules (which is normally handled by the ARM-specific pgd_free() function). This patch changes defines the ARM USER_PGTABLES_CEILING to TASK_SIZE when CONFIG_ARM_LPAE is enabled. Note that the pgd_free() function already checks the presence of the shared pmd page allocated by pgd_alloc() and frees it, though with ceiling 0 this wasn't necessary. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [3.3+] Signed-off-by:
-
Hugh Dickins authored
On architectures where a pgd entry may be shared between user and kernel (e.g. ARM+LPAE), freeing page tables needs a ceiling other than 0. This patch introduces a generic USER_PGTABLES_CEILING that arch code can override. It is the responsibility of the arch code setting the ceiling to ensure the complete freeing of the page tables (usually in pgd_free()). [catalin.marinas@arm.com: commit log; shift_arg_pages(), asm-generic/pgtables.h changes] Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Michal Hocko authored
Since commit 2d11085e ("memcg: do not create memsw files if swap accounting is disabled") memsw files are created only if memcg swap accounting is enabled so it doesn't make any sense to check for it explicitly in mem_cgroup_read(), mem_cgroup_write() and mem_cgroup_reset(). Signed-off-by:
-
Zhang Yanfei authored
Remove the WARN_ON_ONCE(!mm) check as the comment suggested. Kernel code calls find_vma only when it is absolutely sure that the mm_struct arg to it is non-NULL. Signed-off-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: k80c <k80ck80c@gmail.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by:
-
Atsushi Kumagai authored
Now, vmap_area_list is exported as VMCOREINFO for makedumpfile to get the start address of vmalloc region (vmalloc_start). The address which contains vmalloc_start value is represented as below: vmap_area_list.next - OFFSET(vmap_area.list) + OFFSET(vmap_area.va_start) However, both OFFSET(vmap_area.va_start) and OFFSET(vmap_area.list) aren't exported as VMCOREINFO. So this patch exports them externally with small cleanup. [akpm@linux-foundation.org: vmalloc.h should include list.h for list_head] Signed-off-by:
Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Dave Anderson <anderson@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Joonsoo Kim authored
Now, there is no need to maintain vmlist after initializing vmalloc. So remove related code and data structure. Signed-off-by:
Joonsoo Kim <js1304@gmail.com> Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Dave Anderson <anderson@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Joonsoo Kim authored
Although our intention is to unexport internal structure entirely, but there is one exception for kexec. kexec dumps address of vmlist and makedumpfile uses this information. We are about to remove vmlist, then another way to retrieve information of vmalloc layer is needed for makedumpfile. For this purpose, we export vmap_area_list, instead of vmlist. Signed-off-by:
-
Joonsoo Kim authored
This patch is a preparatory step for removing vmlist entirely. For above purpose, we change iterating a vmap_list codes to iterating a vmap_area_list. It is somewhat trivial change, but just one thing should be noticed. Using vmap_area_list in vmallocinfo() introduce ordering problem in SMP system. In s_show(), we retrieve some values from vm_struct. vm_struct's values is not fully setup when va->vm is assigned. Full setup is notified by removing VM_UNLIST flag without holding a lock. When we see that VM_UNLIST is removed, it is not ensured that vm_struct has proper values in view of other CPUs. So we need smp_[rw]mb for ensuring that proper values is assigned when we see that VM_UNLIST is removed. Therefore, this patch not only change a iteration list, but also add a appropriate smp_[rw]mb to right places. Signed-off-by:
-
Joonsoo Kim authored
This patch is a preparatory step for removing vmlist entirely. For above purpose, we change iterating a vmap_list codes to iterating a vmap_area_list. It is somewhat trivial change, but just one thing should be noticed. vmlist is lack of information about some areas in vmalloc address space. For example, vm_map_ram() allocate area in vmalloc address space, but it doesn't make a link with vmlist. To provide full information about vmalloc address space is better idea, so we don't use va->vm and use vmap_area directly. This makes get_vmalloc_info() more precise. Signed-off-by:
-
Joonsoo Kim authored
Now, when we hold a vmap_area_lock, va->vm can't be discarded. So we can safely access to va->vm when iterating a vmap_area_list with holding a vmap_area_lock. With this property, change iterating vmlist codes in vread/vwrite() to iterating vmap_area_list. There is a little difference relate to lock, because vmlist_lock is mutex, but, vmap_area_lock is spin_lock. It may introduce a spinning overhead during vread/vwrite() is executing. But, these are debug-oriented functions, so this overhead is not real problem for common case. Signed-off-by:
-
Joonsoo Kim authored
Inserting and removing an entry to vmlist is linear time complexity, so it is inefficient. Following patches will try to remove vmlist entirely. This patch is preparing step for it. For removing vmlist, iterating vmlist codes should be changed to iterating a vmap_area_list. Before implementing that, we should make sure that when we iterate a vmap_area_list, accessing to va->vm doesn't cause a race condition. This patch ensure that when iterating a vmap_area_list, there is no race condition for accessing to vm_struct. Signed-off-by:
-
Joonsoo Kim authored
Now get_vmalloc_info() is in fs/proc/mmu.c. There is no reason that this code must be here and it's implementation needs vmlist_lock and it iterate a vmlist which may be internal data structure for vmalloc. It is preferable that vmlist_lock and vmlist is only used in vmalloc.c for maintainability. So move the code to vmalloc.c Signed-off-by:
-
Joonsoo Kim authored
This patchset removes vm_struct list management after initializing vmalloc. Adding and removing an entry to vmlist is linear time complexity, so it is inefficient. If we maintain this list, overall time complexity of adding and removing area to vmalloc space is O(N), although we use rbtree for finding vacant place and it's time complexity is just O(logN). And vmlist and vmlist_lock is used many places of outside of vmalloc.c. It is preferable that we hide this raw data structure and provide well-defined function for supporting them, because it makes that they cannot mistake when manipulating theses structure and it makes us easily maintain vmalloc layer. For kexec and makedumpfile, I export vmap_area_list, instead of vmlist. This comes from Atsushi's recommendation. For more information, please refer below link. https://lkml.org/lkml/2012/12/6/184 This patch: The purpose of iterating a vmlist is finding vm area with specific virtual address. find_vm_area() is provided for this purpose and more efficient, because it uses a rbtree. So change it. Signed-off-by:
Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Dave Anderson <anderson@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Darrick J. Wong authored
Walking a bio's page mappings has proved problematic, so create a new bio flag to indicate that a bio's data needs to be snapshotted in order to guarantee stable pages during writeback. Next, for the one user (ext3/jbd) of snapshotting, hook all the places where writes can be initiated without PG_writeback set, and set BIO_SNAP_STABLE there. We must also flag journal "metadata" bios for stable writeout, since file data can be written through the journal. Finally, the MS_SNAP_STABLE mount flag (only used by ext3) is now superfluous, so get rid of it. [akpm@linux-foundation.org: rename _submit_bh()'s `flags' to `bio_flags', delobotomize the _submit_bh declaration] [akpm@linux-foundation.org: teeny cleanup] Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Gerald Schaefer authored
Commit abf09bed ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Josh Triplett authored
drop_caches.c provides code only invokable via sysctl, so don't compile it in when CONFIG_SYSCTL=n. Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
