Once the session is established call into the SUNRPC layer to check
if any offlined trunking connections should be re-enabled.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

For only offline transports, attempt to check connectivity via
a NULL call and, if that succeeds, call a provided session trunking
detection function.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Make xprt_iter_rewind callable outside of xprtmultipath.c
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

In preparation for code re-use, pull out the part of the
rpc_clnt_setup_test_and_add_xprt() portion that sends a NULL rpc
and then calls a session trunking function into a helper function.

Re-organize the end of the function for code re-use.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If we are doing a session trunking test and it fails for the transport,
then remove this transport from the xprt_switch group.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Expose a function that allows a removal of xprt from the rpc_clnt.

When called from NFS that's running a trunked transport then don't
decrement the active transport counter.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When we are adding a transport to a xprt_switch that's already on
the list but has been marked OFFLINE, then make the state ONLINE
since it's been tested now.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Create a new iterator helper that will go thru the all the transports
in the switch and return transports that are marked OFFLINE.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When session is destroy, some of the transports might no longer be
valid trunks for the new session. Offline existing transports.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Iterate thru available transports in the xprt_switch for all
trunkable transports offline and possibly remote them as well.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Re-arrange the code that make offline transport and delete transport
callable functions.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

These functions are no longer needed now that the NFS client places data
and hole segments directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

We now take a 2-step process that allows us to place data and hole
segments directly at their final position in the xdr_stream without
needing to do a bunch of redundant copies to expand holes. Due to the
variable lengths of each segment, the xdr metadata might cross page
boundaries which I account for by setting a small scratch buffer so
xdr_inline_decode() won't fail.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

This will be used during READ_PLUS decoding for handling HOLE segments.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

We need to do this step during READ_PLUS decoding so that we know pages
are the right length and any extra data has been preserved in the tail.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

I do this by creating an xdr subsegment for the range we will be
operating over. This lets me shift data to the correct place without
potentially overwriting anything already there.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Contributed as part of the long patch series that converts NFS from
using dprintk to tracepoints for observability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

A bad verifier is not a garbage argument, it's an authentication
failure. Retrying it doesn't make the problem go away, and delays
upper layer recovery steps.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Currently, we try to determine whether to issue a commit based on
nfs_write_need_commit which looks at the current verifier. In the case
where we got a short write and then tried to follow it up with one that
failed, the verifier can't be trusted.

What we really want to know is whether the pgio request had any
successful writes that came back as UNSTABLE. Add a new flag to the pgio
request, and use that to indicate that we've had a successful unstable
write. Only issue a commit if that flag is set.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When the client gets back a short DIO write, it will then attempt to
issue another write to finish the DIO request. If that write then fails
(as is often the case in an -ENOSPC situation), then we still may need
to issue a COMMIT if the earlier short write was unstable. If that COMMIT
then succeeds, then we don't want the client to reschedule the write
requests, and to instead just return a short write. Otherwise, we can
end up looping over the same DIO write forever.

Always consult dreq->error after a successful RPC, even when the flag
state is not NFS_ODIRECT_DONE.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2028370Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add some new tracepoints to the DIO write code.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Move the field 'tk_rpc_status' so that we eliminate a 4 byte hole in the
structure.
For x86_64, this shrinks the size of the struct by 8 bytes.

'pahole' output before the change:
        /* size: 232, cachelines: 4, members: 27 */
        /* sum members: 222, holes: 1, sum holes: 4 */
        /* sum bitfield members: 8 bits (1 bytes) */
        /* padding: 5 */
        /* last cacheline: 40 bytes */

'pahole' output after the change:
        /* size: 224, cachelines: 4, members: 27 */
        /* padding: 1 */
        /* last cacheline: 32 bytes */
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

nfs_idmap_instantiate() will cause the process that is waiting in
request_key_with_auxdata() to wake up and exit. If there is a second
process waiting for the idmap->idmap_mutex, then it may wake up and
start a new call to request_key_with_auxdata(). If the call to
idmap_pipe_downcall() from the first process has not yet finished
calling nfs_idmap_complete_pipe_upcall_locked(), then we may end up
triggering the WARN_ON_ONCE() in nfs_idmap_prepare_pipe_upcall().

The fix is to ensure that we clear idmap->idmap_upcall_data before
calling nfs_idmap_instantiate().

Fixes: e9ab41b6 ("NFSv4: Clean up the legacy idmapper upcall")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Previously, we required this to value to be a power of 2 for UDP related
reasons. This patch keeps the power of 2 rule for UDP but allows more
flexibility for TCP and RDMA.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Before this commit, with a large enough LRU of expired items (100), the
loop skipped all the expired items and was entirely ineffectual in
trimming the LRU list.

Fixes: 95cd6232 ('SUNRPC: Clean up the AUTH cache code')
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

The valid values of nfs options port and mountport are 0 to USHRT_MAX.

The fs parser will return a fail for port values that are negative
and the sloppy option handling then returns success.

But the sloppy option handling is meant to return success for invalid
options not valid options with invalid values.

Restricting the sloppy option override to handle failure returns for
invalid options only is sufficient to resolve this problem.

Changes:

v2: utilize the return value from fs_parse() to resolve this problem
    instead of changing the parameter definitions.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

The use of kmap() is being deprecated in favor of kmap_local_page().

With kmap_local_page(), the mapping is per thread, CPU local and not
globally visible. Furthermore, the mapping can be acquired from any context
(including interrupts).

Therefore, use kmap_local_page() in nfs_do_filldir() because this mapping
is per thread, CPU local, and not globally visible.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

filemap_fdatawait_range() will always return 0, after patch 6c984083
("NFS: Use of mapping_set_error() results in spurious errors"), it will not
save the wb err in struct address_space->flags:

  result = filemap_fdatawait_range(file->f_mapping, ...) = 0
    filemap_check_errors(mapping) = 0
      test_bit(..., &mapping->flags) // flags is 0
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Deduplicate the helpers to open a device node by passing a name
prefix argument and using the same helper for both kinds of paths.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Don't assume that the NFS4ERR_DELAY means that the server is processing
this slot id.

Fixes: 3453d570 ("NFSv4.1: Avoid false retries when RPC calls are interrupted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When we're trying to figure out what the server may or may not have seen
in terms of request numbers, do not assume that requests with a larger
number were missed, just because we saw a reply to a request with a
smaller number.

Fixes: 3453d570 ("NFSv4.1: Avoid false retries when RPC calls are interrupted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

For filesystems that are case insensitive and case preserving, we need
to be able to rename from one case folded variant of the filename to
another.
Currently, if we have looked up the target filename before the call to
rename, then we may have a hashed dentry with that target name in the
dcache, causing the vfs to optimise away the rename.
To avoid that, let's drop the target dentry, and leave it to the server
to optimise away the rename if that is the correct thing to do.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

The RPC/RDMA driver will return -EPROTO and -ENODEV as connection errors
under certain circumstances. Make sure that we handle them correctly and
avoid cycling forever in a LAYOUTGET/LAYOUTRETURN loop.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

The RPC/RDMA driver will return -EPROTO and -ENODEV as connection errors
under certain circumstances. Make sure that we handle them and report
them to the server. If not, we can end up cycling forever in a
LAYOUTGET/LAYOUTRETURN loop.

Fixes: a12f996d ("NFSv4/pNFS: Use connections to a DS that are all of the same protocol family")
Cc: stable@vger.kernel.org # 5.11.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

This reverts commit c6eb5843.
If a transport is down, then we want to fail over to other transports if
they are listed in the GETDEVICEINFO reply.

Fixes: c6eb5843 ("pNFS: nfs3_set_ds_client should set NFS_CS_NOPING")
Cc: stable@vger.kernel.org # 5.11.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Use the standard gfp mask instead of using GFP_NOWAIT. The latter causes
issues when under memory pressure.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

This is a collection of three fixes for small annoyances.

Two of these are already pending in other trees, but I really don't want
to release another -rc with these issues pending, so I picked up the
patches for these things directly.  We'll end up with duplicate commits
eventually, I prefer that over having these issues pending.

The third one is just me getting rid of another BUG_ON() just because it
was reported and I dislike those things so much.

* merge 'hot-fixes' branch:
  ida: don't use BUG_ON() for debugging
  drm/aperture: Run fbdev removal before internal helpers
  ptrace: fix clearing of JOBCTL_TRACED in ptrace_unfreeze_traced()

This is another old BUG_ON() that just shouldn't exist (see also commit
a382f8fe: "signal handling: don't use BUG_ON() for debugging").

In fact, as Matthew Wilcox points out, this condition shouldn't really
even result in a warning, since a negative id allocation result is just
a normal allocation failure:

  "I wonder if we should even warn here -- sure, the caller is trying to
   free something that wasn't allocated, but we don't warn for
   kfree(NULL)"

and goes on to point out how that current error check is only causing
people to unnecessarily do their own index range checking before freeing
it.

This was noted by Itay Iellin, because the bluetooth HCI socket cookie
code does *not* do that range checking, and ends up just freeing the
error case too, triggering the BUG_ON().

The HCI code requires CAP_NET_RAW, and seems to just result in an ugly
splat, but there really is no reason to BUG_ON() here, and we have
generally striven for allocation models where it's always ok to just do

    free(alloc());

even if the allocation were to fail for some random reason (usually
obviously that "random" reason being some resource limit).

Fixes: 88eca020 ("ida: simplified functions for id allocation")
Reported-by: Itay Iellin <ieitayie@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>