- 07 Nov, 2018 40 commits
-
-
Christoph Hellwig authored
This also moves the optimization for builds with 32-bit dma_addr_t to the compiler (where it belongs) instead of opencoding it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Christoph Hellwig authored
CONFIG_HIGHMEM64 is only one (and these days unusual) way to indicate that > 32-bit dma address are possible. Replace it with a check of the dma_addr_t size. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Chengguang Xu authored
mempool_destroy() can handle NULL pointer correctly, so there is no need to check NULL pointer before calling mempool_destroy(). Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Acked-by:
Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by:
-
Chengguang Xu authored
dma_pool_destroy() can handle NULL pointer correctly, so there is no need to check NULL pointer before calling dma_pool_destroy(). Signed-off-by:
-
James Smart authored
Update the driver version to 12.0.0.8 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
James Smart authored
Add trunking support to the driver. Trunking is found on more recent asics. In general, trunking appears as a single "port" to the driver and overall behavior doesn't differ. Link speed is reported as an aggregate value, while link speed control is done on a per-physical link basis with all links in the trunk symmetrical. Some commands returning port information are updated to additionally provide trunking information. And new ACQEs are generated to report physical link events relative to the trunk. This patch contains the following modifications: - Added link speed settings of 128GB and 256GB. - Added handling of trunk-related ACQEs, mainly logging and trapping of physical link statuses. - Added additional bsg interface to query trunk state by applications. - Augment link_state sysfs attribtute to display trunk link status Signed-off-by:
-
James Smart authored
The switches seem to respond faster to GID_PT vs GID_FT NameServer queries. Add support for GID_PT to be used over GID_FT to enable faster storage failover detection. Includes addition of new module parameter to select between GID_PT and GID_FT (GID_FT is default). Signed-off-by:
-
James Smart authored
An address change for a remote port cause PRLI for the wrong protocol to be sent. The node copy done in the discovery code skipped copying the fc4 protocols supported as well. Fix the copy logic for the address change. Beefed up log messages in this area as well. Signed-off-by:
-
James Smart authored
Testing a point-to-point topology and a case of re-FLOGI without intervening link bouncing, showed an odd interaction with firmware and a resulting scenario where the driver no longer probed after accepting the new FLOGI. Work around the firmware issue by issuing a link bounce if a FLOGI is received after the link is already up and FLOGI's accepted. While debugging the issue, realized that some debug traces should be clarified to help in the future. Signed-off-by:
-
James Smart authored
When LCB's are rejected, if beaconing was already in progress, the Reason Code Explanation was not being set. Should have been set to command in progress. Signed-off-by:
-
James Smart authored
On FCoE adapters, when running link bounce test in a loop, initiator failed to login with switch switch and required driver reload to recover. Switch reached a point where all subsequent FLOGIs would be LS_RJT'd. Further testing showed the condition to be related to not performing FCF discovery between FLOGI's. Fix by monitoring FLOGI failures and once a repeated error is seen repeat FCF discovery. Signed-off-by:
-
James Smart authored
This patch corrects two issues: - An oops would occur if reading based on a non-zero offset. Offset calculation was incorrect. - Updates to ras config (logging level) were ignored if change was made while fw logging was enabled. Revise to dynamically update. Signed-off-by:
-
James Smart authored
Currently, PLOGI failures are infinitely delayed/retried. There have been some fabric situations where the PLOGI's were to the nameserver and it stopped responding. The retries would never clear up. A better resolution in this situation is to retry a couple of times, then drop the link and reinit. This brings back connectivity to the nameserver. Signed-off-by:
-
James Smart authored
After a LOGO in response to an ABTS timeout, a PLOGI wasn't issued to re-establish the login. An nlp_type check in the LOGO completion handler failed to restart discovery for NVME targets. Revised the nlp_type check for NVME as well as SCSI. While reviewing the LOGO handling a few other issues were seen and were addressed: - Better lock synchronization around ndlp data types - When the ABTS times out, unregister the RPI before sending the LOGO so that all local exchange contexts are cleared and nothing received while awaiting LOGO/PLOGI handling will be accepted. - LOGO handling optimized to: Wait only R_A_TOV for a response. It doesn't need to be retried on timeout. If there wasn't a response, a PLOGI will be sent, thus an implicit logout applies as well when the other port sees it. If there is a response, any kind of response is considered "good" and the XRI quarantined for a exchange qualifier window. - PLOGI is issued as soon a LOGO state is resolved. Signed-off-by: -
James Smart authored
An error is an error - but not to the existing return value check. Revise check to handle any failure, not just EIO. Signed-off-by:
-
James Smart authored
Supported speeds is not updated when SFP is removed or replaced Supported speed is obtained from lmt field in READ_CONFIG mailbox response. Driver updates supported speeds only once from PCI probe path. After that it is never updated. So, supported speeds remains the same till reboot or driver reload. When SFP is removed or inserted, driver gets SLI-Port Event ACQE. If SFP is removed, lmt wil have value 0. If a different SFP is inserted, lmt will have value according to its supported speeds. So, afterr SLI-Port Event ACQE handling path, send READ_CONFIG mailbox and update supported speeds. If READ_CONFIG fails, set supported speeds to unknown and log. Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by:
-
Shivasharan S authored
The print related to number of VDs that a particular firmware supports is misleading in some cases. Even though supportMaxExtLDs is set, certain firmware profiles only supports upto 64VDs. Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
-
Shivasharan S authored
IOC INIT frame needs to be fired with a timeout of 180 seconds. Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
-
Shivasharan S authored
In megasas_init_adapter_fusion(), max_mfi_cmds is being calcuated as (MEGASAS_FUSION_INTERNAL_CMDS + MEGASAS_FUSION_IOCTL_CMDS). max_mfi_cmds can be used in megasas_configure_queue_sizes. Signed-off-by:
-
Shivasharan S authored
Rename the scratch pad registers to match firmware headers. No functional change. Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Shivasharan S authored
Optimization: No need to hold hba_lock in dpc context for reading atomic variable. Signed-off-by:
-
Shivasharan S authored
No functional change. Use local variables when accessing raid context in IO path. Improves code readability. Signed-off-by:
-
Shivasharan S authored
When driver fails to start the heartbeat timer, exit from FW init. Signed-off-by:
-
Shivasharan S authored
For SRIOV based adapters, driver should not set the STOP_ADP bit as part of kill adapter. Signed-off-by:
-
Shivasharan S authored
For Invader series, if FW supports more than 8 MSI-x vectors, driver needs to enable combined reply queue mode. For Ventura series, driver enables combined reply queue mode in case of more than 16 MSI-x vectors. Signed-off-by:
-
Shivasharan S authored
Module parameter description for rdpq_enable incorrectly lists the default as enabled. Also, provide range of valid values for resetwaittime in the description. Signed-off-by:
-
Shivasharan S authored
During init, if pci_alloc_irq_vectors() fails, the driver has not yet setup the IRQs. Fix the goto labels and error handling for this case. Signed-off-by:
-
Shivasharan S authored
Change copyright to Broadcom Inc. Also update any references to Avago with Broadcom. Update copyright duration wherever required. Signed-off-by:
-
Shivasharan S authored
For SAS3 and later controllers, FW sets the reset adapter bit indicating the driver to perform a controller reset. Driver needs to check if this bit is set before doing a reset. This reduces the driver probe failure time to 180seconds in case there is a faulty controller connected. Signed-off-by:
-
Shivasharan S authored
In megasas_transition_to_ready() driver waits 180seconds for controller to change FW state. Here we are calling msleep(1) in a loop for this. As explained in timers-howto.txt, msleep(1) will actually sleep longer than 1ms. If a faulty controller is connected, we will end up waiting for much more than 180 seconds causing unnecessary delays during load. Change the granularity of msleep() call from 1ms to 1000ms. Signed-off-by:
-
Shivasharan S authored
Latest firmware adds a mechanism to save firmware logs just before controller reset on pre-allocated internal controller DRAM. This feature is called snapdump which will help debugging firmware issues. This feature requires extra time and firmware reports these values through new driver interface. Before initiating an OCR, driver needs to inform FW to save a snapdump and then wait for a specified time for the snapdump to complete. Signed-off-by:
-
Shivasharan S authored
Currently driver checks for Firmware state change from ISR context, and only when there are interrupts tied with no I/O completions. We have seen multiple cases where doorbell interrupts sent by firmware to indicate FW state change are not processed by driver and it takes long time for driver to trigger OCR. And if there are no IOs running, since we only check the FW state as part of ISR code, fault goes undetected by driver and OCR will not be triggered. This patch introduces a separate workqueue that runs every one second to detect Firmware FAULT state and trigger reset immediately. As an additional gain, removing PCI reads from ISR to check FW state results in improved performance as well. Signed-off-by:
-
Suganath Prabu authored
Modify driver version to 27.100.00.00 (which is equivalent to PH8 OOB driver) Signed-off-by:
Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Suganath Prabu authored
Currently driver is modifying both current & NVRAM/persistent data in Manufacturing page11. Driver should change only current copy of Manufacturing page11. It should not modify the persistent data. So removed the section of code where driver is modifying the persistent data of Manufacturing page11. Signed-off-by:
-
Suganath Prabu authored
If EEDPTagMode field in manufacturing page11 is set then unset it. This is needed to fix a hardware bug only in SAS3/SAS2 cards. So, skipping EEDPTagMode changes in Manufacturing page11 for SAS 3.5 controllers. Signed-off-by:
-
Suganath Prabu authored
This is to fix SYNC CACHE and START STOP command failures with DID_NO_CONNECT during driver unload. In driver's IO submission patch (i.e. in driver's .queuecommand()) driver won't allow any SCSI commands to the IOC when ioc->remove_host flag is set and hence SYNC CACHE commands which are issued to the target drives (where write cache is enabled) during driver unload time is failed with DID_NO_CONNECT status. Now modified the driver to allow SYNC CACHE and START STOP commands to IOC, even when remove_host flag is set. Signed-off-by:
-
