- 07 Nov, 2020 26 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_usb.c:26: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; ' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Function parameter or member 'endpoint' not described in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Excess function parameter 'addr' description in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'ep_num' not described in 'rsi_rx_urb_submit' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'mem_flags' not described in 'rsi_rx_urb_submit' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-3-lee.jones@linaro.org
-
Markov Mikhail authored
rt2800 only gives you survey for current channel. Survey-based ACS algorithms are failing to perform their job when working with rt2800. Make rt2800 save survey for every channel visited and be able to give away that information. There is a bug registered https://dev.archive.openwrt.org/ticket/19081 and this patch solves the issue. Signed-off-by:
Markov Mikhail <markov.mikhail@itmh.ru> sgruszka: remove unused variable Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Sebastian Andrzej Siewior authored
halbtc_send_bt_mp_operation() uses in_interrupt() to determine if it is safe to invoke wait_for_completion(). The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Aside of that in_interrupt() is not correct as it does not catch preempt disabled regions which neither can sleep. halbtc_send_bt_mp_operation() is called from: rtl_watchdog_wq_callback() rtl_btc_periodical() halbtc_get() case BTC_GET_U4_BT_PATCH_VER: halbtc_get_bt_patch_version() which is preemtible context. rtl_c2h_content_parsing() btc_ops->btc_btinfo_notify() rtl_btc_btinfo_notify() exhalbtc_bt_info_notify() ex_btc8723b1ant_bt_info_notify() ex_btc8821a1ant_bt_info_notify() ex_btc8821a2ant_bt_info_notify() btcoexist->btc_set_bt_reg() halbtc_set_bt_reg() rtl_c2h_content_parsing() is in turn called from: rtl_c2hcmd_wq_callback() rtl_c2hcmd_launcher() which is preemptible context and from: _rtl_pci_rx_interrupt rtl_c2hcmd_enqueue() which is obviously not preemptible but limited to C2H_BT_MP commands which does invoke rtl_c2h_content_parsing(). Aside of that it can be reached from: halbtc_get() case BTC_GET_U4_SUPPORTED_FEATURE: halbtc_get_bt_coex_supported_feature() case BTC_GET_U4_BT_FORBIDDEN_SLOT_VAL: halbtc_get_bt_forbidden_slot_val() case BTC_GET_U4_BT_DEVICE_INFO: halbtc_get_bt_device_info() case BTC_GET_U4_SUPPORTED_VERSION: halbtc_get_bt_coex_supported_version() case BTC_GET_U4_SUPPORTED_FEATURE: halbtc_get_bt_coex_supported_feature() btcoexist->btc_get_bt_afh_map_from_bt() halbtc_get_bt_afh_map_from_bt() btcoexist->btc_get_ble_scan_para_from_bt() halbtc_get_ble_scan_para_from_bt() btcoexist->btc_get_ble_scan_type_from_bt() halbtc_get_ble_scan_type_from_bt() btcoexist->btc_get_ant_det_val_from_bt() halbtc_get_ant_det_val_from_bt() btcoexist->btc_get_bt_coex_supported_version() halbtc_get_bt_coex_supported_version() btcoexist->btc_get_bt_coex_supported_feature() halbtc_get_bt_coex_supported_feature() None of these have a caller. Welcome to the wonderful world of HALs and onion layers. Remove in_interrupt() check. Signed-off-by:Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by:
-
Sebastian Andrzej Siewior authored
is_any_client_connect_to_ap() is using in_interrupt() to determine whether it should acquire the lock prior accessing the list. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The function is called from: - halbtc_get() - halbtc_get() halbtc_get_wifi_link_status() - halbtc_display_dbg_msg() halbtc_display_wifi_status() halbtc_get_wifi_link_status() All top level callers are part of the btc_coexist callback inferface and are never invoked from a context which can hold the lock already. The contexts which hold the lock are either protecting list add/del operations or list walks which never call into any of the btc_coexist interfaces. In fact the conditional is outright dangerous because if this function would be invoked from a BH disabled context the check would avoid taking the lock while on another CPU the list could be manipulated under the lock. Remove the in_interrupt() check and always acquire the lock. To simplify the code further use list_empty() instead of walking the list and counting the entries just to check the count for > 0 at the end. Signed-off-by: -
Sebastian Andrzej Siewior authored
The usage of in_atomic() in driver code is deprecated as it can not always detect all states where it is not allowed to sleep. All callers are in premptible thread context and all functions invoke core functions which have checks for invalid calling contexts already. Signed-off-by:
-
Sebastian Andrzej Siewior authored
hostap_get_wireless_stats() is the iw_handler_if::get_wireless_stats() callback of this driver. This callback was not allowed to sleep until commit a160ee69 ("wext: let get_wireless_stats() sleep") in v2.6.32. Remove the therefore pointless in_atomic() check. Signed-off-by:
-
Sebastian Andrzej Siewior authored
issuecommand() is using in_atomic() to decide if it is safe to invoke schedule() while waiting for the command to be accepted. Usage of in_atomic() for this is only half correct as it can not detect all condition where it is not allowed to schedule(). Also Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. Add an may_sleep argument to issuecommand() indicating when it is save to sleep and change schedule() to cond_resched() because it's pointless to invoke schedule() if there is no request to reschedule. Pass the may_sleep condition through the various call chains leading to issuecommand(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
issuecommand() is using in_atomic() to decide if it is safe to invoke schedule() while waiting for the command to be accepted. Usage of in_atomic() for this is only half correct as it can not detect all condition where it is not allowed to schedule(). Also Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. Chasing the call chains leading up to issuecommand() is straight forward, but airo_link() and airo_get_stats() would require to pass the context through a quite large amount of functions. As this is ancient hardware, avoid the churn and enforce the invocation of those functions through the JOB machinery. Signed-off-by:
-
Sebastian Andrzej Siewior authored
airo_get_wireless_stats() is the iw_handler_if::get_wireless_stats() callback of this driver. This callback was not allowed to sleep until commit a160ee69 ("wext: let get_wireless_stats() sleep") in v2.6.32. airo still delegates the readout to a thread, which is not longer necessary. Invoke airo_read_wireless_stats() directly from the callback and remove the now unused JOB_WSTATS handling. Signed-off-by:
-
Sebastian Andrzej Siewior authored
The usage of in_irq()/in_interrupt() in drivers is phased out and the BUG_ON()'s based on those are not covering all contexts in which these functions cannot be called. Aside of that BUG_ON() should only be used as last resort, which is clearly not the case here. A broad variety of checks in the invoked functions (always enabled or debug option dependent) cover these conditions already, so the BUG_ON()'s do not really provide additional value. Just remove them. Signed-off-by:
-
Tokunori Ikegami authored
Buffalo WI-U3-866D is supported by the rtl8812au driver. Also RTL8812AU software supports the product RTL8192EU also. So add Buffalo WI-U3-866D with the RTL8192EU driver info. Signed-off-by:
Tokunori Ikegami <ikegami.t@gmail.com> Cc: linux-wireless@vger.kernel.org Signed-off-by:
-
Chin-Yen Lee authored
This patch checks the supported lps deep mode from firmware feature, and allows different firmware have different deep power mode. Original module parameter rtw_fw_lps_deep_mode is replaced with rtw_disable_lps_deep_mode for user to disable lps deep mode. Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
Tzu-En Huang <tehuang@realtek.com> Signed-off-by:
-
Chin-Yen Lee authored
Originally driver checks if firmware has left lps via reading the setting of REG_TCR register. But this way may fail when firmware is frequently changing power state. Therefore, firmware provides a safer option for driver. When firmware leaves lps successfully, it sends a C2H response to inform driver. Signed-off-by:
-
Chin-Yen Lee authored
Some functions need the support of firmware with special version. In order to get the feature of current firmware, we store the information in firmware header and parse after firmware is loaded. The current feature list in firmware header includes checking leave lps via C2H and supported lps deep mode. Signed-off-by:
-
Chin-Yen Lee authored
In current flow, driver issues power requests to firmware for entering or leaving deep power mode. But driver does not wait for an ack from firmware via reading CPWM register when driver requests to enter deep power mode. The behavior will lead to unsynchronized state between firmware and driver. Furthermore, consecutive same power requests may confuse firmware and leads to unexpected value of CPWM register. This patch ensures that the power request will wait for an ack from firmware and only send one power request each time. Signed-off-by:
-
Ching-Te Ku authored
BT firmware will report BLE-HID and BLE-RCU in different profile. We can distinguish the two profile from BT info now. Add the coexistence for BLE-HID coexistence, it can make BLE HID work more smoothly. BLE-HID need to Tx/Rx packet more frequently to respond user operation, but RCU doesn't. In the case of RCU coexistence, it will make Wi-Fi have a higher priority to earn more Wi-Fi throughput. If BLE-HID go for the same case, it will make user feel mouse is lagging. Desired BT firmware BT-COEX version: 0x1c Desired WL firmware version: 9.9 Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
WeitaoWangoc authored
During realtek USB wireless NIC initialization, it's unexpected disconnection will cause urb sumbmit fail. On the one hand, _rtl_usb_cleanup_rx will be called to clean up rx stuff, especially for rtl_wq. On the other hand, disconnection will cause rtl_usb_disconnect and _rtl_usb_cleanup_rx to be called. So, rtl_wq will be flush/destroy twice, which will cause non-canonical address 0xdead000000000122 access and general protection fault. Fixed this issue by remove _rtl_usb_cleanup_rx when urb sumbmit fail. Signed-off-by:
WeitaoWangoc <WeitaoWang-oc@zhaoxin.com> Acked-by:
-
Remi Depommier authored
These full-mac chips use little-endian byte ordering. This patch adds a few missing conversions to/from little-endian so that the driver may be used with a big-endian host. Signed-off-by:
Remi Depommier <rde@setrix.com> Signed-off-by:
-
Arnd Bergmann authored
clang -Wextra warns about functions returning a 'const' integer: drivers/net/wireless/realtek/rtw88/rtw8822b.c:90:8: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers] static const u8 rtw8822b_get_swing_index(struct rtw_dev *rtwdev) Remove the extra qualifier here. Fixes: c97ee3e0 ("rtw88: add power tracking support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
There are thousands of warnings in a W=2 build from just one file: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.c:3788:15: warning: pointer targets in initialization of 'u8 *' {aka 'unsigned char *'} from 'char *' differ in signedness [-Wpointer-sign] Change the types to consistently use 'const char *' for the strings. Signed-off-by: -
Arnd Bergmann authored
gcc -Wextra complains about the function type cast: drivers/net/wireless/intersil/hostap/hostap_hw.c:3173:48: warning: cast between incompatible function types from ‘void (*)(struct tasklet_struct *)’ to ‘void (*)(long unsigned int)’ [-Wcast-function-type] Avoid this by just using the regular tasklet_setup() function instead of the incorrect homegrown version. Fixes: 7433c969 ("intersil: convert tasklets to use new tasklet_setup() API") Signed-off-by:
-
Tom Rix authored
A break is not needed if it is preceded by a return Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Marek Vasut authored
In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode, the association fails. The former is using wpa_supplicant during association, the later is set up using hostapd: iwl$ cat hostapd.conf interface=wlp1s0 ssid=test country_code=DE hw_mode=g channel=1 wpa=2 wpa_passphrase=test wpa_key_mgmt=WPA-PSK iwl$ hostapd -d hostapd.conf rsi$ wpa_supplicant -i wlan0 -c <(wpa_passphrase test test) The problem is that the TX EAPOL data descriptor RSI_DESC_REQUIRE_CFM_TO_HOST flag and extended descriptor EAPOL4_CONFIRM frame type are not set in case the AP is iwlwifi, because in that case the TX EAPOL packet is 2 bytes shorter. The downstream vendor driver has this change in place already [1], however there is no explanation for it, neither is there any commit history from which such explanation could be obtained. [1] https://github.com/SiliconLabs/RS911X-nLink-OSD/blob/master/rsi/rsi_91x_hal.c#L238Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
In order to enable -Wimplicit-fallthrough for Clang[1], replace the existing /* fall-through */ comments with the new pseudo-keyword macro fallthrough[2]. [1] https://git.kernel.org/linus/e2079e93f562c7f7a030eb7642017ee5eabaaa10 [2] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
In order to enable -Wimplicit-fallthrough for Clang[1], replace the existing /* fall through */ comments with the new pseudo-keyword macro fallthrough[2]. [1] https://git.kernel.org/linus/e2079e93f562c7f7a030eb7642017ee5eabaaa10 [2] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
Romain Perier <romain.perier@gmail.com> Signed-off-by:
Allen Pais <apais@linux.microsoft.com> Signed-off-by:
-
- 25 Oct, 2020 14 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by:Joe Perches <joe@perches.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Eric Biggers authored
Commit 453431a5 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Joe Perches authored
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "A single fix to compute the field offset of the SNOOPX bit in the data source bitmask of perf events correctly" * tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: correct SNOOPX field offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Thomas Gleixner: "Just a trivial fix for kernel-doc warnings" * tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/seqlocks: Fix kernel-doc warnings
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "Add support for stat of various special file types (WSL reparse points for char, block, fifo)" * tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number smb3: add some missing definitions from MS-FSCC smb3: remove two unused variables smb3: add support for stat of WSL reparse points for special file types
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
-
