- 30 Oct, 2014 27 commits
-
-
Andy Adamson authored
commit d1f456b0 upstream. Commit 2f60ea6b ("NFSv4: The NFSv4.0 client must send RENEW calls if it holds a delegation") set the NFS4_RENEW_TIMEOUT flag in nfs4_renew_state, and does not put an nfs41_proc_async_sequence call, the NFSv4.1 lease renewal heartbeat call, on the wire to renew the NFSv4.1 state if the flag was not set. The NFS4_RENEW_TIMEOUT flag is set when "now" is after the last renewal (cl_last_renewal) plus the lease time divided by 3. This is arbitrary and sometimes does the following: In normal operation, the only way a future state renewal call is put on the wire is via a call to nfs4_schedule_state_renewal, which schedules a nfs4_renew_state workqueue task. nfs4_renew_state determines if the NFS4_RENEW_TIMEOUT should be set, and the calls nfs41_proc_async_sequence, which only gets sent if the NFS4_RENEW_TIMEOUT flag is set. Then the nfs41_proc_async_sequence rpc_release function schedules another state remewal via nfs4_schedule_state_renewal. Without this change we can get into a state where an application stops accessing the NFSv4.1 share, state renewal calls stop due to the NFS4_RENEW_TIMEOUT flag _not_ being set. The only way to recover from this situation is with a clientid re-establishment, once the application resumes and the server has timed out the lease and so returns NFS4ERR_BAD_SESSION on the subsequent SEQUENCE operation. An example application: open, lock, write a file. sleep for 6 * lease (could be less) ulock, close. In the above example with NFSv4.1 delegations enabled, without this change, there are no OP_SEQUENCE state renewal calls during the sleep, and the clientid is recovered due to lease expiration on the close. This issue does not occur with NFSv4.1 delegations disabled, nor with NFSv4.0, with or without delegations enabled. Signed-off-by:
Andy Adamson <andros@netapp.com> Link: http://lkml.kernel.org/r/1411486536-23401-1-git-send-email-andros@netapp.com Fixes: 2f60ea6b (NFSv4: The NFSv4.0 client must send RENEW calls...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit df817ba3 upstream. The current open/lock state recovery unfortunately does not handle errors such as NFS4ERR_CONN_NOT_BOUND_TO_SESSION correctly. Instead of looping, just proceeds as if the state manager is finished recovering. This patch ensures that we loop back, handle higher priority errors and complete the open/lock state recovery. Signed-off-by:
-
Trond Myklebust authored
commit a4339b7b upstream. If a NFSv4.x server returns NFS4ERR_STALE_CLIENTID in response to a CREATE_SESSION or SETCLIENTID_CONFIRM in order to tell us that it rebooted a second time, then the client will currently take this to mean that it must declare all locks to be stale, and hence ineligible for reboot recovery. RFC3530 and RFC5661 both suggest that the client should instead rely on the server to respond to inelegible open share, lock and delegation reclaim requests with NFS4ERR_NO_GRACE in this situation. Signed-off-by:
-
Willy Tarreau authored
commit 72cf9012 upstream. This fix ensures that we never meet an integer overflow while adding 255 while parsing a variable length encoding. It works differently from commit 206a81c1 ("lzo: properly check for overruns") because instead of ensuring that we don't overrun the input, which is tricky to guarantee due to many assumptions in the code, it simply checks that the cumulated number of 255 read cannot overflow by bounding this number. The MAX_255_COUNT is the maximum number of times we can add 255 to a base count without overflowing an integer. The multiply will overflow when multiplying 255 by more than MAXINT/255. The sum will overflow earlier depending on the base count. Since the base count is taken from a u8 and a few bits, it is safe to assume that it will always be lower than or equal to 2*255, thus we can always prevent any overflow by accepting two less 255 steps. This patch also reduces the CPU overhead and actually increases performance by 1.1% compared to the initial code, while the previous fix costs 3.1% (measured on x86_64). The fix needs to be backported to all currently supported stable kernels. Reported-by:
Willem Pinckaers <willem@lekkertech.net> Cc: "Don A. Bailey" <donb@securitymouse.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Willy Tarreau authored
commit af958a38 upstream. This reverts commit 206a81c1 ("lzo: properly check for overruns"). As analysed by Willem Pinckaers, this fix is still incomplete on certain rare corner cases, and it is easier to restart from the original code. Reported-by:
-
Willy Tarreau authored
commit d98a0526 upstream. Add a complete description of the LZO format as processed by the decompressor. I have not found a public specification of this format hence this analysis, which will be used to better understand the code. Cc: Willem Pinckaers <willem@lekkertech.net> Cc: "Don A. Bailey" <donb@securitymouse.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit e4dc601b upstream. hwreg_present() and hwreg_write() temporarily change the VBR register to another vector table. This table contains a valid bus error handler only, all other entries point to arbitrary addresses. If an interrupt comes in while the temporary table is active, the processor will start executing at such an arbitrary address, and the kernel will crash. While most callers run early, before interrupts are enabled, or explicitly disable interrupts, Finn Thain pointed out that macsonic has one callsite that doesn't, causing intermittent boot crashes. There's another unsafe callsite in hilkbd. Fix this for good by disabling and restoring interrupts inside hwreg_present() and hwreg_write(). Explicitly disabling interrupts can be removed from the callsites later. Reported-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
K. Y. Srinivasan authored
commit 45d727ce upstream. Fix a bug in vmbus_open() and properly propagate the error. I would like to thank Dexuan Cui <decui@microsoft.com> for identifying the issue. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Tested-by:
Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 72c6b71c upstream. Eliminate the call to BUG_ON() by waiting for the host to respond. We are trying to reclaim the ownership of memory that was given to the host and so we will have to wait until the host responds. Signed-off-by:
-
K. Y. Srinivasan authored
commit 66be6530 upstream. Eliminate calls to BUG_ON() by properly handling errors. In cases where rollback is possible, we will return the appropriate error to have the calling code decide how to rollback state. In the case where we are transferring ownership of the guest physical pages to the host, we will wait for the host to respond. Signed-off-by:
-
K. Y. Srinivasan authored
commit fdeebcc6 upstream. Posting messages to the host can fail because of transient resource related failures. Correctly deal with these failures and increase the number of attempts to post the message before giving up. In this version of the patch, I have normalized the error code to Linux error code. Signed-off-by:
-
Kees Cook authored
commit 471b095d upstream. An empty firmware request name will trigger warnings when building device names. Make sure this is caught earlier and rejected. The warning was visible via the test_firmware.ko module interface: echo -ne "\x00" > /sys/devices/virtual/misc/test_firmware/trigger_request Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Tested-by:
-
Arun Easi authored
commit 75554b68 upstream. Signed-off-by:
Arun Easi <arun.easi@qlogic.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Chris J Arges authored
commit 4089b71c upstream. When using a virtual SCSI disk in a VMWare VM if blkdev_issue_zeroout is used data can be improperly zeroed out using the mptfusion driver. This patch disables write_same for this driver and the vmware subsystem_vendor which ensures that manual zeroing out is used instead. BugLink: http://bugs.launchpad.net/bugs/1371591Reported-by:
Bruce Lucas <bruce.lucas@mongodb.com> Tested-by:
Chris J Arges <chris.j.arges@canonical.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Mike Christie authored
commit a41a9ad3 upstream. Dan Carpenter found a issue where be2iscsi would copy the ip from userspace to the driver buffer before checking the len of the data being copied: http://marc.info/?l=linux-scsi&m=140982651504251&w=2 This patch just has us only copy what we the driver buffer can support. Tested-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Pankaj Dubey authored
commit 5336be84 upstream. If LOG_DEVICE is defined and map->dev is NULL it will lead to NULL pointer dereference. This patch fixes this issue by adding check for dev->NULL in all such places in regmap.c Signed-off-by:
Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Xiubo Li authored
commit 2c98e0c1 upstream. If 'map->dev' is NULL and there will lead dev_name() to be NULL pointer dereference. So before dev_name(), we need to have check of the map->dev pionter. We also should make sure that the 'name' pointer shouldn't be NULL for debugfs_create_dir(). So here using one default "dummy" debugfs name when the 'name' pointer and 'map->dev' are both NULL. Signed-off-by:
Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by:
-
Andy Shevchenko authored
commit fb57862e upstream. If the driver was compiled with DMA support, but DMA channels weren't acquired by some reason, mid_spi_dma_exit() will crash the kernel. Fixes: 7063c0d9 (spi/dw_spi: add DMA support) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
commit b41583e7 upstream. In case of 8 bit mode and DMA usage we end up with every second byte written as 0. We have to respect bits_per_word settings what this patch actually does. Signed-off-by:
-
Bryan O'Donoghue authored
commit ee1b5b16 upstream. Quark x1000 advertises PGE via the standard CPUID method PGE bits exist in Quark X1000's PTEs. In order to flush an individual PTE it is necessary to reload CR3 irrespective of the PTE.PGE bit. See Quark Core_DevMan_001.pdf section 6.4.11 This bug was fixed in Galileo kernels, unfixed vanilla kernels are expected to crash and burn on this platform. Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1411514784-14885-1-git-send-email-pure.logic@nexus-software.ieSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
David Matlack authored
commit 2ea75be3 upstream. vcpu ioctls can hang the calling thread if issued while a vcpu is running. However, invalid ioctls can happen when userspace tries to probe the kind of file descriptors (e.g. isatty() calls ioctl(TCGETS)); in that case, we know the ioctl is going to be rejected as invalid anyway and we can fail before trying to take the vcpu mutex. This patch does not change functionality, it just makes invalid ioctls fail faster. Signed-off-by:
David Matlack <dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Christian Borntraeger authored
commit f346026e upstream. We must not fallthrough if the conditions for external call are not met. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by:
-
David Matlack authored
commit 56f17dd3 upstream. The following events can lead to an incorrect KVM_EXIT_MMIO bubbling up to userspace: (1) Guest accesses gpa X without a memory slot. The gfn is cached in struct kvm_vcpu_arch (mmio_gfn). On Intel EPT-enabled hosts, KVM sets the SPTE write-execute-noread so that future accesses cause EPT_MISCONFIGs. (2) Host userspace creates a memory slot via KVM_SET_USER_MEMORY_REGION covering the page just accessed. (3) Guest attempts to read or write to gpa X again. On Intel, this generates an EPT_MISCONFIG. The memory slot generation number that was incremented in (2) would normally take care of this but we fast path mmio faults through quickly_check_mmio_pf(), which only checks the per-vcpu mmio cache. Since we hit the cache, KVM passes a KVM_EXIT_MMIO up to userspace. This patch fixes the issue by using the memslot generation number to validate the mmio cache. Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by:
-
Andy Lutomirski authored
commit a1480dcc upstream. Accessing do_remount_sb should require global CAP_SYS_ADMIN, but only one of the two call sites was appropriately protected. Fixes CVE-2014-7975. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Sage Weil authored
commit 42383020 upstream. We check whether transid is already committed via last_trans_committed and then search through trans_list for pending transactions. If last_trans_committed is updated by btrfs_commit_transaction after we check it (there is no locking), we will fail to find the committed transaction and return EINVAL to the caller. This has been observed occasionally by ceph-osd (which uses this ioctl heavily). Fix by rechecking whether the provided transid <= last_trans_committed after the search fails, and if so return 0. Signed-off-by:
Sage Weil <sage@redhat.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Josef Bacik authored
commit bbe90514 upstream. Marc Merlin sent me a broken fs image months ago where it would blow up in the upper->checked BUG_ON() in build_backref_tree. This is because we had a scenario like this block a -- level 4 (not shared) | block b -- level 3 (reloc block, shared) | block c -- level 2 (not shared) | block d -- level 1 (shared) | block e -- level 0 (shared) We go to build a backref tree for block e, we notice block d is shared and add it to the list of blocks to lookup it's backrefs for. Now when we loop around we will check edges for the block, so we will see we looked up block c last time. So we lookup block d and then see that the block that points to it is block c and we can just skip that edge since we've already been up this path. The problem is because we clear need_check when we see block d (as it is shared) we never add block b as needing to be checked. And because block c is in our path already we bail out before we walk up to block b and add it to the backref check list. To fix this we need to reset need_check if we trip over a block that doesn't need to be checked. This will make sure that any subsequent blocks in the path as we're walking up afterwards are added to the list to be processed. With this patch I can now mount Marc's fs image and it'll complete the balance without panicing. Thanks, Reported-by:
Marc MERLIN <marc@merlins.org> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Josef Bacik authored
commit 1d52c78a upstream. When doing log replay we may have to update inodes, which traditionally goes through our delayed inode stuff. This will try to move space over from the trans handle, but we don't reserve space in our trans handle on replay since we don't know how much we will need, so instead we try to flush. But because we have a trans handle open we won't flush anything, so if we are out of reserve space we will simply return ENOSPC. Since we know that if an operation made it into the log then we definitely had space before the box bought the farm then we don't need to worry about doing this space reservation. Use the fs_info->log_root_recovering flag to skip the delayed inode stuff and update the item directly. Thanks, Signed-off-by:
-
- 15 Oct, 2014 13 commits
-
-
Greg Kroah-Hartman authored
-
Andreas Bomholtz authored
commit dee80ad1 upstream. Added the Seluxit ApS USB Serial Dongle to cp210x driver. Signed-off-by:
Andreas Bomholtz <andreas@seluxit.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Joe Savage authored
commit bfc2d7df upstream. Added support for Ketra N1 wireless interface, which uses the Silicon Labs' CP2104 USB to UART bridge with customized PID 8946. Signed-off-by:
Joe Savage <joe.savage@goketra.com> Signed-off-by:
-
Lu Baolu authored
commit ddbe1fca upstream. This full-speed USB device generates spurious remote wakeup event as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result, Linux can't enter system suspend and S0ix power saving modes once this keyboard is used. This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk. With this quirk set, wakeup capability will be ignored during device configure. This patch could be back-ported to kernels as old as 2.6.39. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Gao feng authored
[ Upstream commit 33d99113 ] commit 25fb6ca4 "net IPv6 : Fix broken IPv6 routing table after loopback down-up" allocates addrconf router for ipv6 address when lo device up. but commit a881ae1f "ipv6:don't call addrconf_dst_alloc again when enable lo" breaks this behavior. Since the addrconf router is moved to the garbage list when lo device down, we should release this router and rellocate a new one for ipv6 address when lo device up. This patch solves bug 67951 on bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=67951 change from v1: use ip6_rt_put to repleace ip6_del_rt, thanks Hannes! change code style, suggested by Sergei. CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by:
Weilong Chen <chenweilong@huawei.com> Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Per Hurtig authored
[ Upstream commit bef1909e ] Fix to a problem observed when losing a FIN segment that does not contain data. In such situations, TLP is unable to recover from *any* tail loss and instead adds at least PTO ms to the retransmission process, i.e., RTO = RTO + PTO. Signed-off-by:
Per Hurtig <per.hurtig@kau.se> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Nandita Dukkipati <nanditad@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit bdf6fa52 ] Currently association restarts do not take into consideration the state of the socket. When a restart happens, the current assocation simply transitions into established state. This creates a condition where a remote system, through a the restart procedure, may create a local association that is no way reachable by user. The conditions to trigger this are as follows: 1) Remote does not acknoledge some data causing data to remain outstanding. 2) Local application calls close() on the socket. Since data is still outstanding, the association is placed in SHUTDOWN_PENDING state. However, the socket is closed. 3) The remote tries to create a new association, triggering a restart on the local system. The association moves from SHUTDOWN_PENDING to ESTABLISHED. At this point, it is no longer reachable by any socket on the local system. This patch addresses the above situation by moving the newly ESTABLISHED association into SHUTDOWN-SENT state and bundling a SHUTDOWN after the COOKIE-ACK chunk. This way, the restarted associate immidiately enters the shutdown procedure and forces the termination of the unreachable association. Reported-by:
David Laight <David.Laight@aculab.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 3be07244 ] In xmit path, we build a flowi6 which will be used for the output route lookup. We are sending a GRE packet, neither IPv4 nor IPv6 encapsulated packet, thus the protocol should be IPPROTO_GRE. Fixes: c12b395a ("gre: Support GRE over IPv6") Reported-by:
Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
KY Srinivasan authored
[ Upstream commit dedb845d ] After the packet is successfully sent, we should not touch the skb as it may have been freed. This patch is based on the work done by Long Li <longli@microsoft.com>. In this version of the patch I have fixed issues pointed out by David. David, please queue this up for stable. Signed-off-by:
Long Li <longli@microsoft.com> Tested-by:
-
Vlad Yasevich authored
[ Upstream commit 7d3083ee ] When receiving a vlan-tagged frame that still contains a vlan header, the length of the packet will be greater then MTU+ETH_HLEN since it will account of the extra vlan header. TG3 checks this for the case for 802.1Q, but not for 802.1ad. As a result, full sized 802.1ad frames get dropped by the card. Add a check for 802.1ad protocol when receving full sized frames. Suggested-by:
Prashant Sreedharan <prashant@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 476c1885 ] TG3 appears to have an issue performing TSO and checksum offloading correclty when the frame has been vlan encapsulated (non-accelrated). In these cases, tcp checksum is not correctly updated. This patch attempts to work around this issue. After the patch, 802.1ad vlans start working correctly over tg3 devices. CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit eed4d839 ] Use dst_entry held by sk_dst_get() to retrieve tunnel's PMTU. The dst_mtu(__sk_dst_get(tunnel->sock)) call was racy. __sk_dst_get() could return NULL if tunnel->sock->sk_dst_cache was reset just before the call, thus making dst_mtu() dereference a NULL pointer: [ 1937.661598] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 1937.664005] IP: [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp] [ 1937.664005] PGD daf0c067 PUD d9f93067 PMD 0 [ 1937.664005] Oops: 0000 [#1] SMP [ 1937.664005] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables udp_tunnel pppoe pppox ppp_generic slhc deflate ctr twofish_generic twofish_x86_64_3way xts lrw gf128mul glue_helper twofish_x86_64 twofish_common blowfish_generic blowfish_x86_64 blowfish_common des_generic cbc xcbc rmd160 sha512_generic hmac crypto_null af_key xfrm_algo 8021q garp bridge stp llc tun atmtcp clip atm ext3 mbcache jbd iTCO_wdt coretemp kvm_intel iTCO_vendor_support kvm pcspkr evdev ehci_pci lpc_ich mfd_core i5400_edac edac_core i5k_amb shpchp button processor thermal_sys xfs crc32c_generic libcrc32c dm_mod usbhid sg hid sr_mod sd_mod cdrom crc_t10dif crct10dif_common ata_generic ahci ata_piix tg3 libahci libata uhci_hcd ptp ehci_hcd pps_core usbcore scsi_mod libphy usb_common [last unloaded: l2tp_core] [ 1937.664005] CPU: 0 PID: 10022 Comm: l2tpstress Tainted: G O 3.17.0-rc1 #1 [ 1937.664005] Hardware name: HP ProLiant DL160 G5, BIOS O12 08/22/2008 [ 1937.664005] task: ffff8800d8fda790 ti: ffff8800c43c4000 task.ti: ffff8800c43c4000 [ 1937.664005] RIP: 0010:[<ffffffffa049db88>] [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp] [ 1937.664005] RSP: 0018:ffff8800c43c7de8 EFLAGS: 00010282 [ 1937.664005] RAX: ffff8800da8a7240 RBX: ffff8800d8c64600 RCX: 000001c325a137b5 [ 1937.664005] RDX: 8c6318c6318c6320 RSI: 000000000000010c RDI: 0000000000000000 [ 1937.664005] RBP: ffff8800c43c7ea8 R08: 0000000000000000 R09: 0000000000000000 [ 1937.664005] R10: ffffffffa048e2c0 R11: ffff8800d8c64600 R12: ffff8800ca7a5000 [ 1937.664005] R13: ffff8800c439bf40 R14: 000000000000000c R15: 0000000000000009 [ 1937.664005] FS: 00007fd7f610f700(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 [ 1937.664005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1937.664005] CR2: 0000000000000020 CR3: 00000000d9d75000 CR4: 00000000000027e0 [ 1937.664005] Stack: [ 1937.664005] ffffffffa049da80 ffff8800d8fda790 000000000000005b ffff880000000009 [ 1937.664005] ffff8800daf3f200 0000000000000003 ffff8800c43c7e48 ffffffff81109b57 [ 1937.664005] ffffffff81109b0e ffffffff8114c566 0000000000000000 0000000000000000 [ 1937.664005] Call Trace: [ 1937.664005] [<ffffffffa049da80>] ? pppol2tp_connect+0x235/0x41e [l2tp_ppp] [ 1937.664005] [<ffffffff81109b57>] ? might_fault+0x9e/0xa5 [ 1937.664005] [<ffffffff81109b0e>] ? might_fault+0x55/0xa5 [ 1937.664005] [<ffffffff8114c566>] ? rcu_read_unlock+0x1c/0x26 [ 1937.664005] [<ffffffff81309196>] SYSC_connect+0x87/0xb1 [ 1937.664005] [<ffffffff813e56f7>] ? sysret_check+0x1b/0x56 [ 1937.664005] [<ffffffff8107590d>] ? trace_hardirqs_on_caller+0x145/0x1a1 [ 1937.664005] [<ffffffff81213dee>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1937.664005] [<ffffffff8114c262>] ? spin_lock+0x9/0xb [ 1937.664005] [<ffffffff813092b4>] SyS_connect+0x9/0xb [ 1937.664005] [<ffffffff813e56d2>] system_call_fastpath+0x16/0x1b [ 1937.664005] Code: 10 2a 84 81 e8 65 76 bd e0 65 ff 0c 25 10 bb 00 00 4d 85 ed 74 37 48 8b 85 60 ff ff ff 48 8b 80 88 01 00 00 48 8b b8 10 02 00 00 <48> 8b 47 20 ff 50 20 85 c0 74 0f 83 e8 28 89 83 10 01 00 00 89 [ 1937.664005] RIP [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp] [ 1937.664005] RSP <ffff8800c43c7de8> [ 1937.664005] CR2: 0000000000000020 [ 1939.559375] ---[ end trace 82d44500f28f8708 ]--- Fixes: f34c4a35 ("l2tp: take PMTU from tunnel UDP socket") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Acked-by:
-
Jiri Benc authored
[ Upstream commit 2ba5af42 ] When there are multiple vlan headers present in a received frame, the first one is put into vlan_tci and protocol is set to ETH_P_8021Q. Anything in the skb beyond the VLAN TPID may be still non-linear, including the inner TCI and ethertype. While ovs_flow_extract takes care of IP and IPv6 headers, it does nothing with ETH_P_8021Q. Later, if OVS_ACTION_ATTR_POP_VLAN is executed, __pop_vlan_tci pulls the next vlan header into vlan_tci. This leads to two things: 1. Part of the resulting ethernet header is in the non-linear part of the skb. When eth_type_trans is called later as the result of OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also, __pop_vlan_tci is in fact accessing random data when it reads past the TPID. 2. network_header points into the ethernet header instead of behind it. mac_len is set to a wrong value (10), too. Reported-by:
Yulong Pei <ypei@redhat.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
