- 16 Dec, 2017 40 commits
-
-
Florian Westphal authored
[ Upstream commit 7b4fdf77 ] Andrey reports syzkaller splat caused by NF_CT_ASSERT(!ip_is_fragment(ip_hdr(skb))); in ipv4 nat. But this assertion (and the comment) are wrong, this function does see fragments when IP_NODEFRAG setsockopt is used. As conntrack doesn't track packets without complete l4 header, only the first fragment is tracked. Because applying nat to first packet but not the rest makes no sense this also turns off tracking of all fragments. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Thumshirn authored
[ Upstream commit 0bc31538 ] zram can handle at most SECTORS_PER_PAGE sectors in a bio's bvec. When using the NVMe over Fabrics loopback target which potentially sends a huge bulk of pages attached to the bio's bvec this results in a kernel panic because of array out of bounds accesses in zram_decompress_page(). Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Chris Brandt authored
[ Upstream commit 2501c1bb ] While modifying the driver to use the STOP interrupt, the completion of the intermediate transfers need to wake the driver back up in order to initiate the next transfer (restart condition). Otherwise you get never ending interrupts and only the first transfer sent. Fixes: 71ccea09 ("i2c: riic: correctly finish transfers") Reported-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Tested-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 07de4bc8 ] In a regular interrupt handler driver was finishing the crypt/decrypt request by calling complete on crypto request. This is disallowed since converting to skcipher in commit b286d8b1 ("crypto: skcipher - Add skcipher walk interface") and causes a warning: WARNING: CPU: 0 PID: 0 at crypto/skcipher.c:430 skcipher_walk_first+0x13c/0x14c The interrupt is marked shared but in fact there are no other users sharing it. Thus the simplest solution seems to be to just use a threaded interrupt handler, after converting it to oneshot. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 15e66807 ] Andrey reported the following kernel crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 14446 Comm: syz-executor6 Not tainted 4.10.0+ #82 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88001f311700 task.stack: ffff88001f6e8000 RIP: 0010:ip6mr_sk_done+0x15a/0x3d0 net/ipv6/ip6mr.c:1618 RSP: 0018:ffff88001f6ef418 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff10003edde8c RCX: ffffc900043ee000 RDX: 0000000000000004 RSI: ffffffff83e3b3f8 RDI: 0000000000000020 RBP: ffff88001f6ef508 R08: fffffbfff0dcc5d8 R09: 0000000000000000 R10: ffffffff86e62ec0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88001f6ef4e0 R15: ffff8800380a0040 FS: 00007f7a52cec700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000061c500 CR3: 000000001f1ae000 CR4: 00000000000006f0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: rawv6_close+0x4c/0x80 net/ipv6/raw.c:1217 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432 sock_release+0x8d/0x1e0 net/socket.c:597 __sock_create+0x39d/0x880 net/socket.c:1226 sock_create_kern+0x3f/0x50 net/socket.c:1243 inet_ctl_sock_create+0xbb/0x280 net/ipv4/af_inet.c:1526 icmpv6_sk_init+0x163/0x500 net/ipv6/icmp.c:954 ops_init+0x10a/0x550 net/core/net_namespace.c:115 setup_net+0x261/0x660 net/core/net_namespace.c:291 copy_net_ns+0x27e/0x540 net/core/net_namespace.c:396 9pnet_virtio: no channels available for device ./file1 create_new_namespaces+0x437/0x9b0 kernel/nsproxy.c:106 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205 SYSC_unshare kernel/fork.c:2281 [inline] SyS_unshare+0x64e/0x1000 kernel/fork.c:2231 entry_SYSCALL_64_fastpath+0x1f/0xc2 This is because net->ipv6.mr6_tables is not initialized at that point, ip6mr_rules_init() is not called yet, therefore on the error path when we iterator the list, we trigger this oops. Fix this by reordering ip6mr_rules_init() before icmpv6_sk_init(). Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit 78d55054 ] On failure to configure a VF MAC/VLAN filter we should not attempt to rollback filters that we failed to configure with -EEXIST. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit 22118d86 ] It is too late to check for the limit of the number of VF multicast addresses after they have already been copied to the req->multicast[] array, possibly overflowing it. Do the check before copying. Also fix the error path to not skip unlocking vf2pf_mutex. Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit 466e8bf1 ] It is possible to crash the kernel by accessing a PTP device while its associated bnx2x interface is down. Before the interface is brought up, the timecounter is not initialized, so accessing it results in NULL dereference. Fix it by checking if the interface is up. Use -ENETDOWN as the error code when the interface is down. -EFAULT in bnx2x_ptp_adjfreq() did not seem right. Tested using phc_ctl get/set/adj/freq commands. Signed-off-by:
-
Blomme, Maarten authored
[ Upstream commit 4342696d ] Signed-off-by:
Maarten Blomme <Maarten.Blomme@flir.com> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit ba4dd156 ] Currently we BUG() if we see an ESR_EL2.EC value we don't recognise. As configurable disables/enables are added to the architecture (controlled by RES1/RES0 bits respectively), with associated synchronous exceptions, it may be possible for a guest to trigger exceptions with classes that we don't recognise. While we can't service these exceptions in a manner useful to the guest, we can avoid bringing down the host. Per ARM DDI 0487A.k_iss10775, page D7-1937, EC values within the range 0x00 - 0x2c are reserved for future use with synchronous exceptions, and EC values within the range 0x2d - 0x3f may be used for either synchronous or asynchronous exceptions. The patch makes KVM handle any unknown EC by injecting an UNDEFINED exception into the guest, with a corresponding (ratelimited) warning in the host dmesg. We could later improve on this with with a new (opt-in) exit to the host userspace. Cc: Dave Martin <dave.martin@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit f050fe7a ] Currently we BUG() if we see a HSR.EC value we don't recognise. As configurable disables/enables are added to the architecture (controlled by RES1/RES0 bits respectively), with associated synchronous exceptions, it may be possible for a guest to trigger exceptions with classes that we don't recognise. While we can't service these exceptions in a manner useful to the guest, we can avoid bringing down the host. Per ARM DDI 0406C.c, all currently unallocated HSR EC encodings are reserved, and per ARM DDI 0487A.k_iss10775, page G6-4395, EC values within the range 0x00 - 0x2c are reserved for future use with synchronous exceptions, and EC values within the range 0x2d - 0x3f may be used for either synchronous or asynchronous exceptions. The patch makes KVM handle any unknown EC by injecting an UNDEFINED exception into the guest, with a corresponding (ratelimited) warning in the host dmesg. We could later improve on this with with a new (opt-in) exit to the host userspace. Cc: Dave Martin <dave.martin@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
-
Wanpeng Li authored
[ Upstream commit 2f707d97 ] Reported by syzkaller: WARNING: CPU: 1 PID: 27742 at arch/x86/kvm/vmx.c:11029 nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029 CPU: 1 PID: 27742 Comm: a.out Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029 vmx_leave_nested arch/x86/kvm/vmx.c:11136 [inline] vmx_set_msr+0x1565/0x1910 arch/x86/kvm/vmx.c:3324 kvm_set_msr+0xd4/0x170 arch/x86/kvm/x86.c:1099 do_set_msr+0x11e/0x190 arch/x86/kvm/x86.c:1128 __msr_io arch/x86/kvm/x86.c:2577 [inline] msr_io+0x24b/0x450 arch/x86/kvm/x86.c:2614 kvm_arch_vcpu_ioctl+0x35b/0x46a0 arch/x86/kvm/x86.c:3497 kvm_vcpu_ioctl+0x232/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2721 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x1bf/0x1790 fs/ioctl.c:683 SYSC_ioctl fs/ioctl.c:698 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:689 entry_SYSCALL_64_fastpath+0x1f/0xc2 The syzkaller folks reported a nested_run_pending warning during userspace clear VMX capability which is exposed to L1 before. The warning gets thrown while doing (*(uint32_t*)0x20aecfe8 = (uint32_t)0x1); (*(uint32_t*)0x20aecfec = (uint32_t)0x0); (*(uint32_t*)0x20aecff0 = (uint32_t)0x3a); (*(uint32_t*)0x20aecff4 = (uint32_t)0x0); (*(uint64_t*)0x20aecff8 = (uint64_t)0x0); r[29] = syscall(__NR_ioctl, r[4], 0x4008ae89ul, 0x20aecfe8ul, 0, 0, 0, 0, 0, 0); i.e. KVM_SET_MSR ioctl with struct kvm_msrs { .nmsrs = 1, .pad = 0, .entries = { {.index = MSR_IA32_FEATURE_CONTROL, .reserved = 0, .data = 0} } } The VMLANCH/VMRESUME emulation should be stopped since the CPU is going to reset here. This patch resets the nested_run_pending since the CPU is going to be reset hence there should be nothing pending. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Suggested-by:
Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Franck Demathieu authored
[ Upstream commit 4b9de5da ] The 'size' variable is unsigned according to the dt-bindings. As this variable is used as integer in other places, create a new variable that allows to fix the following sparse issue (-Wtypesign): drivers/irqchip/irq-crossbar.c:279:52: warning: incorrect type in argument 3 (different signedness) drivers/irqchip/irq-crossbar.c:279:52: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:279:52: got int *<noident> Signed-off-by:
Franck Demathieu <fdemathieu@gmail.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 5d181531 ] if REG_VPI fails, the driver was incorrectly issuing INIT_VFI (a SLI4 command) on a SLI3 adapter. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit 637fdbae ] If queue_delayed_work() gets called with NULL @wq, the kernel will oops asynchronuosly on timer expiration which isn't too helpful in tracking down the offender. This actually happened with smc. __queue_delayed_work() already does several input sanity checks synchronously. Add NULL @wq check. Reported-by:
Dave Jones <davej@codemonkey.org.uk> Link: http://lkml.kernel.org/r/20170227171439.jshx3qplflyrgcv7@codemonkey.org.ukSigned-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit 0580b762 ] ata_sff_qc_issue() expects upper layers to never issue commands on a command protocol that it doesn't implement. While the assumption holds fine with the usual IO path, nothing filters based on the command protocol in the passthrough path (which was added later), allowing the warning to be tripped with a passthrough command with the right (well, wrong) protocol. Failing with AC_ERR_SYSTEM is the right thing to do anyway. Remove the unnecessary WARN. Reported-by:
-
Jim Mattson authored
[ Upstream commit 587d7e72 ] VMCLEAR should silently ignore a failure to clear the launch state of the VMCS referenced by the operand. Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit b6e7aeea ] 'kbuf' is allocated just a few lines above using 'memdup_user()'. If the 'if (dev->buf)' test fails, this memory is never released. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
John Keeping authored
[ Upstream commit 38355b2a ] When binding a gadget to a device, "name" is stored in gi->udc_name, but this does not happen when unregistering and the string is leaked. Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
-
Daniel Drake authored
[ Upstream commit f2f10b7e ] Add support for media keys on the keyboard that comes with the Asus V221ID and ZN241IC All In One computers. The keys to support here are WLAN, BRIGHTNESSDOWN and BRIGHTNESSUP. This device is not visibly branded as Chicony, and the USB Vendor ID suggests that it is a JESS device. However this seems like the right place to put it: the usage codes are identical to the currently supported devices, and this driver already supports the ASUS AIO keyboard AK1D. Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Phil Reid authored
[ Upstream commit f759921c ] When a threaded irq handler is chained attached to one of the gpio pins when configure for level irq the altera_gpio_irq_leveL_high_handler does not mask the interrupt while being handled by the chained irq. This resulting in the threaded irq not getting enough cycles to complete quickly enough before the irq was disabled as faulty. handle_level_irq should be used in this situation instead of handle_simple_irq. In gpiochip_irqchip_add set default handler to handle_bad_irq as per Documentation/gpio/driver.txt. Then set the correct handler in the set_type callback. Signed-off-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit b92675d9 ] The device node returned by of_find_node_by_name() needs to be released after it is no longer needed to avoid a device node leak. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 10e5778f ] After commit 0549bde0 ("of: fix of_node leak caused in of_find_node_opts_by_path"), the following error may be reported when running omap images. OF: ERROR: Bad of_node_put() on /ocp@68000000 CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14) [<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac) [<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c) [<c05af1b0>] (kobject_release) from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94) [<c0ad1aa4>] (of_find_node_by_name) from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c) [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from [<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274) [<c1215d5c>] (omap3xxx_hwmod_init) from [<c120faa8>] (omap3_init_early+0xa0/0x11c) [<c120faa8>] (omap3_init_early) from [<c120fb2c>] (omap3430_init_early+0x8/0x30) [<c120fb2c>] (omap3430_init_early) from [<c1204710>] (setup_arch+0xc04/0xc34) [<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c) [<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c) of_find_node_by_name() drops the reference to the passed device node. The commit referenced above exposes this problem. To fix the problem, use of_get_child_by_name() instead of of_find_node_by_name(); of_get_child_by_name() does not drop the reference count of passed device nodes. While semantically different, we only look for immediate children of the passed device node, so of_get_child_by_name() is a more appropriate function to use anyway. Release the reference to the device node obtained with of_get_child_by_name() after it is no longer needed to avoid another device node leak. While at it, clean up the code and change the return type of omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use and the return type of of_device_is_available(). Cc: Qi Hou <qi.hou@windriver.com> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
David Daney authored
[ Upstream commit ab426321 ] For powerpc the __jump_table section in modules is not aligned, this causes a WARN_ON() splat when loading a module containing a __jump_table. Strict alignment became necessary with commit 3821fd35 ("jump_label: Reduce the size of struct static_key"), currently in linux-next, which uses the two least significant bits of pointers to __jump_table elements. Fix by forcing __jump_table to 8, which is the same alignment used for this section in the kernel proper. Link: http://lkml.kernel.org/r/20170301220453.4756-1-david.daney@cavium.comReviewed-by:
Jason Baron <jbaron@akamai.com> Acked-by:
Jessica Yu <jeyu@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Sachin Sant authored
[ Upstream commit a6d8a215 ] Tests under alignment subdirectory are skipped when executed on previous generation hardware, but harness still marks them as failed. test: test_copy_unaligned tags: git_version:unknown [SKIP] Test skipped on line 26 skip: test_copy_unaligned selftests: copy_unaligned [FAIL] The MAGIC_SKIP_RETURN_VALUE value assigned to rc variable is retained till the program exit which causes the test to be marked as failed. This patch resets the value before returning to the main() routine. With this patch the test o/p is as follows: test: test_copy_unaligned tags: git_version:unknown [SKIP] Test skipped on line 26 skip: test_copy_unaligned selftests: copy_unaligned [PASS] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit bb1a2c26 ] Sergey reported a might sleep warning triggered from the hpet resume path. It's caused by the call to disable_irq() from interrupt disabled context. The problem with the low level resume code is that it is not accounted as a special system_state like we do during the boot process. Calling the same code during system boot would not trigger the warning. That's inconsistent at best. In this particular case it's trivial to replace the disable_irq() with disable_hardirq() because this particular code path is solely used from system resume and the involved hpet interrupts can never be force threaded. Reported-and-tested-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703012108460.3684@nanosSigned-off-by:
-
Ladislav Michl authored
[ Upstream commit 7807e086 ] gpmc_probe_onenand_child returns success even on gpmc_onenand_init failure. Fix that. Signed-off-by:
Ladislav Michl <ladis@linux-mips.org> Acked-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit e3dc847a ] In vti6_xmit(), the check for IPV6_MIN_MTU before we send a ICMPV6_PKT_TOOBIG message is missing. So we might report a PMTU below 1280. Fix this by adding the required check. Fixes: ccd740cb ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Sasha Levin authored
This reverts commit cabab3f9. Not needed for < 4.9. Signed-off-by:
-
Sasha Levin authored
This reverts commit dadab2d4. Not required on < 4.10. Signed-off-by:
-
Sasha Levin authored
This reverts commit 82f260d4. Not required on < 4.10. Signed-off-by:
-
Kirill A. Shutemov authored
commit c0c379e2 upstream. Dave noticed that after fixing MADV_DONTNEED vs numa balancing race the last pmdp_huge_get_and_clear_notify() user is gone. Let's drop the helper. Link: http://lkml.kernel.org/r/20170306112047.24809-1-kirill.shutemov@linux.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [jwang: adjust context for 4.4] Signed-off-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit ced10803 upstream. In case prot_numa, we are under down_read(mmap_sem). It's critical to not clear pmd intermittently to avoid race with MADV_DONTNEED which is also under down_read(mmap_sem): CPU0: CPU1: change_huge_pmd(prot_numa=1) pmdp_huge_get_and_clear_notify() madvise_dontneed() zap_pmd_range() pmd_trans_huge(*pmd) == 0 (without ptl) // skip the pmd set_pmd_at(); // pmd is re-established The race makes MADV_DONTNEED miss the huge pmd and don't clear it which may break userspace. Found by code analysis, never saw triggered. Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
commit 0a85e51d upstream. Patch series "thp: fix few MADV_DONTNEED races" For MADV_DONTNEED to work properly with huge pages, it's critical to not clear pmd intermittently unless you hold down_write(mmap_sem). Otherwise MADV_DONTNEED can miss the THP which can lead to userspace breakage. See example of such race in commit message of patch 2/4. All these races are found by code inspection. I haven't seen them triggered. I don't think it's worth to apply them to stable@. This patch (of 4): Restructure code in preparation for a fix. Link: http://lkml.kernel.org/r/20170302151034.27829-2-kirill.shutemov@linux.intel.comSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Stephen Hemminger authored
commit f1c635b4 upstream. Hyper-V host emulation of SCSI for virtual DVD device reports SCSI version 0 (UNKNOWN) but is still capable of supporting REPORTLUN. Without this patch, a GEN2 Linux guest on Hyper-V will not boot 4.11 successfully with virtual DVD ROM device. What happens is that the SCSI scan process falls back to doing sequential probing by INQUIRY. But the storvsc driver has a previous workaround that masks/blocks all errors reports from INQUIRY (or MODE_SENSE) commands. This workaround causes the scan to then populate a full set of bogus LUN's on the target and then sends kernel spinning off into a death spiral doing block reads on the non-existent LUNs. By setting the correct blacklist flags, the target with the DVD device is scanned with REPORTLUN and that works correctly. Patch needs to go in current 4.11, it is safe but not necessary in older kernels. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Russell King authored
commit 3aaf33be upstream. When qemu starts a kernel in a bare environment, the default SCR has the AW and FW bits clear, which means that the kernel can't modify the PSR A or PSR F bits, and means that FIQs and imprecise aborts are always masked. When running uboot under qemu, the AW and FW SCR bits are set, and the kernel functions normally - and this is how real hardware behaves. Fix this for qemu by ignoring the FIQ bit. Fixes: 8bafae20 ("ARM: BUG if jumping to usermode address in kernel mode") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Cc: Alex Shi <alex.shi@linaro.org> Signed-off-by:
-
Russell King authored
commit 8bafae20 upstream. Detect if we are returning to usermode via the normal kernel exit paths but the saved PSR value indicates that we are in kernel mode. This could occur due to corrupted stack state, which has been observed with "ftracetest". This ensures that we catch the problem case before we get to user code. Signed-off-by:
-
Dave Martin authored
commit 071b6d4a upstream. Currently, loading of a task's fpsimd state into the CPU registers is skipped if that task's state is already present in the registers of that CPU. However, the code relies on the struct fpsimd_state * (and by extension struct task_struct *) to unambiguously identify a task. There is a particular case in which this doesn't work reliably: when a task exits, its task_struct may be recycled to describe a new task. Consider the following scenario: 1) Task P loads its fpsimd state onto cpu C. per_cpu(fpsimd_last_state, C) := P; P->thread.fpsimd_state.cpu := C; 2) Task X is scheduled onto C and loads its fpsimd state on C. per_cpu(fpsimd_last_state, C) := X; X->thread.fpsimd_state.cpu := C; 3) X exits, causing X's task_struct to be freed. 4) P forks a new child T, which obtains X's recycled task_struct. T == X. T->thread.fpsimd_state.cpu == C (inherited from P). 5) T is scheduled on C. T's fpsimd state is not loaded, because per_cpu(fpsimd_last_state, C) == T (== X) && T->thread.fpsimd_state.cpu == C. (This is the check performed by fpsimd_thread_switch().) So, T gets X's registers because the last registers loaded onto C were those of X, in (2). This patch fixes the problem by ensuring that the sched-in check fails in (5): fpsimd_flush_task_state(T) is called when T is forked, so that T->thread.fpsimd_state.cpu == C cannot be true. This relies on the fact that T is not schedulable until after copy_thread() completes. Once T's fpsimd state has been loaded on some CPU C there may still be other cpus D for which per_cpu(fpsimd_last_state, D) == &X->thread.fpsimd_state. But D is necessarily != C in this case, and the check in (5) must fail. An alternative fix would be to do refcounting on task_struct. This would result in each CPU holding a reference to the last task whose fpsimd state was loaded there. It's not clear whether this is preferable, and it involves higher overhead than the fix proposed in this patch. It would also move all the task_struct freeing work into the context switch critical section, or otherwise some deferred cleanup mechanism would need to be introduced, neither of which seems obviously justified. Fixes: 005f78cd ("arm64: defer reloading a task's FPSIMD state to userland resume") Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> [will: word-smithed the comment so it makes more sense] Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Andrew Honig authored
commit d59d51f0 upstream. This fixes CVE-2017-1000407. KVM allows guests to directly access I/O port 0x80 on Intel hosts. If the guest floods this port with writes it generates exceptions and instability in the host kernel, leading to a crash. With this change guest writes to port 0x80 on Intel will behave the same as they currently behave on AMD systems. Prevent the flooding by removing the code that sets port 0x80 as a passthrough port. This is essentially the same as upstream patch 99f85a28, except that patch was for AMD chipsets and this patch is for Intel. Signed-off-by:
Andrew Honig <ahonig@google.com> Signed-off-by:
-
Kristina Martsenko authored
commit 26aa7b3b upstream. VTTBR_BADDR_MASK is used to sanity check the size and alignment of the VTTBR address. It seems to currently be off by one, thereby only allowing up to 47-bit addresses (instead of 48-bit) and also insufficiently checking the alignment. This patch fixes it. As an example, with 4k pages, before this patch we have: PHYS_MASK_SHIFT = 48 VTTBR_X = 37 - 24 = 13 VTTBR_BADDR_SHIFT = 13 - 1 = 12 VTTBR_BADDR_MASK = ((1 << 35) - 1) << 12 = 0x00007ffffffff000 Which is wrong, because the mask doesn't allow bit 47 of the VTTBR address to be set, and only requires the address to be 12-bit (4k) aligned, while it actually needs to be 13-bit (8k) aligned because we concatenate two 4k tables. With this patch, the mask becomes 0x0000ffffffffe000, which is what we want. Fixes: 0369f6a3 ("arm64: KVM: EL2 register definitions") Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by:
-
