- 13 Dec, 2019 19 commits
-
-
Björn Töpel authored
In order to properly exercise the BPF dispatcher, this commit adds BPF dispatcher usage to BPF_TEST_RUN when executing XDP programs. Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191213175112.30208-5-bjorn.topel@gmail.com
-
Björn Töpel authored
This commit adds a BPF dispatcher for XDP. The dispatcher is updated from the XDP control-path, dev_xdp_install(), and used when an XDP program is run via bpf_prog_run_xdp(). Signed-off-by:
-
Björn Töpel authored
The BPF dispatcher is a multi-way branch code generator, mainly targeted for XDP programs. When an XDP program is executed via the bpf_prog_run_xdp(), it is invoked via an indirect call. The indirect call has a substantial performance impact, when retpolines are enabled. The dispatcher transform indirect calls to direct calls, and therefore avoids the retpoline. The dispatcher is generated using the BPF JIT, and relies on text poking provided by bpf_arch_text_poke(). The dispatcher hijacks a trampoline function it via the __fentry__ nop of the trampoline. One dispatcher instance currently supports up to 64 dispatch points. A user creates a dispatcher with its corresponding trampoline with the DEFINE_BPF_DISPATCHER macro. Signed-off-by:
-
Björn Töpel authored
Refactor the image allocation in the BPF trampoline code into a separate function, so it can be shared with the BPF dispatcher in upcoming commits. Signed-off-by:
-
Andrii Nakryiko authored
Fix up perf_buffer.c selftest to take into account offline/missing CPUs. Fixes: ee5cf82c ("selftests/bpf: test perf buffer API") Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
-
Andrii Nakryiko authored
It's quite common on some systems to have more CPUs enlisted as "possible", than there are (and could ever be) present/online CPUs. In such cases, perf_buffer creationg will fail due to inability to create perf event on missing CPU with error like this: libbpf: failed to open perf buffer event on cpu #16: No such device This patch fixes the logic of perf_buffer__new() to ignore CPUs that are missing or currently offline. In rare cases where user explicitly listed specific CPUs to connect to, behavior is unchanged: libbpf will try to open perf event buffer on specified CPU(s) anyways. Fixes: fb84b822 ("libbpf: add perf buffer API") Signed-off-by:
-
Andrii Nakryiko authored
Add a bunch of test validating CPU mask parsing logic and error handling. Signed-off-by:
-
Andrii Nakryiko authored
This logic is re-used for parsing a set of online CPUs. Having it as an isolated piece of code working with input string makes it conveninent to test this logic as well. While refactoring, also improve the robustness of original implementation. Signed-off-by:
-
Alexei Starovoitov authored
Jakub Sitnicki says: ==================== This change has been suggested by Martin Lau [0] during a review of a related patch set that extends reuseport tests [1]. Patches 1 & 2 address a warning due to unrecognized section name from libbpf when running reuseport tests. We don't want to carry this warning into test_progs. Patches 3-8 massage the reuseport tests to ease the switch to test_progs framework. The intention here is to show the work. Happy to squash these, if needed. Patches 9-10 do the actual move and conversion to test_progs. Output from a test_progs run after changes pasted below. Thanks, Jakub [0] https://lore.kernel.org/bpf/20191123110751.6729-1-jakub@cloudflare.com/T/#m607d822caeb1eb5db101172821a78cc3896ff1c3 [1] https://lore.kernel.org/bpf/20191123110751.6729-1-jakub@cloudflare.com/T/#m55881bae9fb6e34837d07a0c0a7ffbc138f8d06f ==================== Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Jakub Sitnicki authored
The tests were originally written in abort-on-error style. With the switch to test_progs we can no longer do that. So at the risk of not cleaning up some resource on failure, we now return to the caller on error. That said, failure inside one test should not affect others because we run setup/cleanup before/after every test. Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Jakub Sitnicki authored
Do a pure move the show the actual work needed to adapt the tests in subsequent patch at the cost of breaking test_progs build for the moment. Signed-off-by:
-
Jakub Sitnicki authored
Again, prepare for switching reuseport tests to test_progs framework. test_progs framework will print the subtest name for us if we set it. Signed-off-by:
-
Jakub Sitnicki authored
Prepare for switching reuseport tests to test_progs framework, where we don't have the luxury to terminate the process on failure. Modify setup helpers to signal failure via the return value with the help of a macro similar to the one currently in use by the tests. Signed-off-by:
-
Jakub Sitnicki authored
Prepare for switching reuseport tests to test_progs framework. Loop over the tests and perform setup/cleanup for each test separately, remembering that with test_progs we can select tests to run. Signed-off-by:
-
Jakub Sitnicki authored
Prepare for iterating over individual tests without introducing another nested loop in the main test function. Signed-off-by:
-
Jakub Sitnicki authored
Having string arrays to map socket family & type to a name prevents us from unrolling the test runner loop in the subsequent patch. Introduce helpers that do the same thing. Signed-off-by:
-
Jakub Sitnicki authored
Update the only function that is not using sa_family_t in this source file. Signed-off-by:
-
Jakub Sitnicki authored
Now that libbpf can recognize SK_REUSEPORT programs, we no longer have to pass a prog_type hint before loading the object file. Signed-off-by:
-
Jakub Sitnicki authored
Allow loading BPF object files that contain SK_REUSEPORT programs without having to manually set the program type before load if the the section name is set to "sk_reuseport". Makes user-space code needed to load SK_REUSEPORT BPF program more concise. Signed-off-by:
-
- 12 Dec, 2019 2 commits
-
-
Andrii Nakryiko authored
On ppc64le __u64 and __s64 are defined as long int and unsigned long int, respectively. This causes compiler to emit warning when %lld/%llu are used to printf 64-bit numbers. Fix this by casting to size_t/ssize_t with %zu and %zd format specifiers, respectively. v1->v2: - use size_t/ssize_t instead of custom typedefs (Martin). Fixes: 1f8e2bcb ("libbpf: Refactor relocation handling") Fixes: abd29c93 ("libbpf: allow specifying map definitions using BTF") Signed-off-by:
-
Daniel Borkmann authored
After Spectre 2 fix via 290af866 ("bpf: introduce BPF_JIT_ALWAYS_ON config") most major distros use BPF_JIT_ALWAYS_ON configuration these days which compiles out the BPF interpreter entirely and always enables the JIT. Also given recent fix in e1608f3f ("bpf: Avoid setting bpf insns pages read-only when prog is jited"), we additionally avoid fragmenting the direct map for the BPF insns pages sitting in the general data heap since they are not used during execution. Latter is only needed when run through the interpreter. Since both x86 and arm64 JITs have seen a lot of exposure over the years, are generally most up to date and maintained, there is more downside in !BPF_JIT_ALWAYS_ON configurations to have the interpreter enabled by default rather than the JIT. Add a ARCH_WANT_DEFAULT_BPF_JIT config which archs can use to set the bpf_jit_{enable,kallsyms} to 1. Back in the days the bpf_jit_kallsyms knob was set to 0 by default since major distros still had /proc/kallsyms addresses exposed to unprivileged user space which is not the case anymore. Hence both knobs are set via BPF_JIT_DEFAULT_ON which is set to 'y' in case of BPF_JIT_ALWAYS_ON or ARCH_WANT_DEFAULT_BPF_JIT. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Will Deacon <will@kernel.org> Acked-by:
-
- 11 Dec, 2019 13 commits
-
-
Daniel Borkmann authored
Allow for audit messages to be emitted upon BPF program load and unload for having a timeline of events. The load itself is in syscall context, so additional info about the process initiating the BPF prog creation can be logged and later directly correlated to the unload event. The only info really needed from BPF side is the globally unique prog ID where then audit user space tooling can query / dump all info needed about the specific BPF program right upon load event and enrich the record, thus these changes needed here can be kept small and non-intrusive to the core. Raw example output: # auditctl -D # auditctl -a always,exit -F arch=x86_64 -S bpf # ausearch --start recent -m 1334 ... ---- time->Wed Nov 27 16:04:13 2019 type=PROCTITLE msg=audit(1574867053.120:84664): proctitle="./bpf" type=SYSCALL msg=audit(1574867053.120:84664): arch=c000003e syscall=321 \ success=yes exit=3 a0=5 a1=7ffea484fbe0 a2=70 a3=0 items=0 ppid=7477 \ pid=12698 auid=1001 uid=1001 gid=1001 euid=1001 suid=1001 fsuid=1001 \ egid=1001 sgid=1001 fsgid=1001 tty=pts2 ses=4 comm="bpf" \ exe="/home/jolsa/auditd/audit-testsuite/tests/bpf/bpf" \ subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=UNKNOWN[1334] msg=audit(1574867053.120:84664): prog-id=76 op=LOAD ---- time->Wed Nov 27 16:04:13 2019 type=UNKNOWN[1334] msg=audit(1574867053.120:84665): prog-id=76 op=UNLOAD ... Signed-off-by:Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/bpf/20191206214934.11319-1-jolsa@kernel.org
-
Stanislav Fomichev authored
Switch existing pattern of "offsetof(..., member) + FIELD_SIZEOF(..., member)' to "offsetofend(..., member)" which does exactly what we need without all the copy-paste. Suggested-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
Andrii Nakryiko authored
New development cycles starts, bump to v0.0.7 proactively. Signed-off-by:
-
Russell King authored
Improve the prologue code sequence to be able to take advantage of 64-bit stores, changing the code from: push {r4, r5, r6, r7, r8, r9, fp, lr} mov fp, sp sub ip, sp, #80 ; 0x50 sub sp, sp, #600 ; 0x258 str ip, [fp, #-100] ; 0xffffff9c mov r6, #0 str r6, [fp, #-96] ; 0xffffffa0 mov r4, #0 mov r3, r4 mov r2, r0 str r4, [fp, #-104] ; 0xffffff98 str r4, [fp, #-108] ; 0xffffff94 to the tighter: push {r4, r5, r6, r7, r8, r9, fp, lr} mov fp, sp mov r3, #0 sub r2, sp, #80 ; 0x50 sub sp, sp, #600 ; 0x258 strd r2, [fp, #-100] ; 0xffffff9c mov r2, #0 strd r2, [fp, #-108] ; 0xffffff94 mov r2, r0 resulting in a saving of three instructions. Signed-off-by:Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Shahjada Abul Husain authored
T6 has a separate region known as high priority filter region that allows classifying packets going through ULD path. So, query firmware for HPFILTER resources and enable the high priority offload filter support when it is available. Signed-off-by:
Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chen Wandun authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/freescale/enetc/enetc_qos.c: In function enetc_setup_tc_cbs: drivers/net/ethernet/freescale/enetc/enetc_qos.c:195:6: warning: variable tc_max_sized_frame set but not used [-Wunused-but-set-variable] Fixes: c431047c ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by:
Chen Wandun <chenwandun@huawei.com> Signed-off-by:
-
Jakub Kicinski authored
Device stats are currently hard coded in the PCI BAR0 layout. Add a ability to read them from the TLV area instead. Names for the stats are maintained by the driver, and their meaning documented. This allows us to more easily add and remove device stats. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Kuniyuki Iwashima authored
When a TCP socket is created, sk->sk_state is initialized twice as TCP_CLOSE in sock_init_data() and tcp_init_sock(). The tcp_init_sock() is always called after the sock_init_data(), so it is not necessary to update sk->sk_state in the tcp_init_sock(). Before v2.1.8, the code of the two functions was in the inet_create(). In the patch of v2.1.8, the tcp_v4/v6_init_sock() were added and the code of initialization of sk->state was duplicated. Signed-off-by:
Kuniyuki Iwashima <kuni1840@gmail.com> Signed-off-by:
-
Michael Walle authored
Provide a software TX timestamp and add it to the ethtool query interface. skb_tx_timestamp() is also needed if one would like to use PHY timestamping. Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: introduce variable window congestion control We improve thoughput greatly by introducing a variety of the Reno congestion control algorithm at the link level. ==================== Signed-off-by: -
Jon Maloy authored
We introduce a simple variable window congestion control for links. The algorithm is inspired by the Reno algorithm, covering both 'slow start', 'congestion avoidance', and 'fast recovery' modes. - We introduce hard lower and upper window limits per link, still different and configurable per bearer type. - We introduce a 'slow start theshold' variable, initially set to the maximum window size. - We let a link start at the minimum congestion window, i.e. in slow start mode, and then let is grow rapidly (+1 per rceived ACK) until it reaches the slow start threshold and enters congestion avoidance mode. - In congestion avoidance mode we increment the congestion window for each window-size number of acked packets, up to a possible maximum equal to the configured maximum window. - For each non-duplicate NACK received, we drop back to fast recovery mode, by setting the both the slow start threshold to and the congestion window to (current_congestion_window / 2). - If the timeout handler finds that the transmit queue has not moved since the previous timeout, it drops the link back to slow start and forces a probe containing the last sent sequence number to the sent to the peer, so that this can discover the stale situation. This change does in reality have effect only on unicast ethernet transport, as we have seen that there is no room whatsoever for increasing the window max size for the UDP bearer. For now, we also choose to keep the limits for the broadcast link unchanged and equal. This algorithm seems to give a 50-100% throughput improvement for messages larger than MTU. Suggested-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Maloy authored
When we increase the link tranmsit window we often observe the following scenario: 1) A STATE message bypasses a sequence of traffic packets and arrives far ahead of those to the receiver. STATE messages contain a 'peers_nxt_snt' field to indicate which was the last packet sent from the peer. This mechanism is intended as a last resort for the receiver to detect missing packets, e.g., during very low traffic when there is no packet flow to help early loss detection. 3) The receiving link compares the 'peer_nxt_snt' field to its own 'rcv_nxt', finds that there is a gap, and immediately sends a NACK message back to the peer. 4) When this NACKs arrives at the sender, all the requested retransmissions are performed, since it is a first-time request. Just like in the scenario described in the previous commit this leads to many redundant retransmissions, with decreased throughput as a consequence. We fix this by adding two more conditions before we send a NACK in this sitution. First, the deferred queue must be empty, so we cannot assume that the potential packet loss has already been detected by other means. Second, we check the 'peers_snd_nxt' field only in probe/ probe_reply messages, thus turning this into a true mechanism of last resort as it was really meant to be. Acked-by:
-
Jon Maloy authored
When we increase the link send window we sometimes observe the following scenario: 1) A packet #N arrives out of order far ahead of a sequence of older packets which are still under way. The packet is added to the deferred queue. 2) The missing packets arrive in sequence, and for each 16th of them an ACK is sent back to the receiver, as it should be. 3) When building those ACK messages, it is checked if there is a gap between the link's 'rcv_nxt' and the first packet in the deferred queue. This is always the case until packet number #N-1 arrives, and a 'gap' indicator is added, effectively turning them into NACK messages. 4) When those NACKs arrive at the sender, all the requested retransmissions are done, since it is a first-time request. This sometimes leads to a huge amount of redundant retransmissions, causing a drop in max throughput. This problem gets worse when we in a later commit introduce variable window congestion control, since it drops the link back to 'fast recovery' much more often than necessary. We now fix this by not sending any 'gap' indicator in regular ACK messages. We already have a mechanism for sending explicit NACKs in place, and this is sufficient to keep up the packet flow. Acked-by:
-
- 10 Dec, 2019 6 commits
-
-
Nathan Chancellor authored
Clang warns: ../drivers/net/ppp/ppp_async.c:877:6: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] ap->rpkt = skb; ^ ../drivers/net/ppp/ppp_async.c:875:5: note: previous statement is here if (!skb) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Clean up this entire block's indentation so that it is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 6722e78c ("[PPP]: handle misaligned accesses") Link: https://github.com/ClangBuiltLinux/linux/issues/800Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns: ../drivers/net/ethernet/smsc/smc911x.c:939:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (!lp->ctl_rfduplx) ^ ../drivers/net/ethernet/smsc/smc911x.c:936:2: note: previous statement is here if (lp->ctl_rspeed != 100) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 0a0c72c9 ("[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips") Link: https://github.com/ClangBuiltLinux/linux/issues/796Signed-off-by: -
Nathan Chancellor authored
Clang warns: ../drivers/net/ethernet/dec/tulip/uli526x.c:1812:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] switch (mode) { ^ ../drivers/net/ethernet/dec/tulip/uli526x.c:1809:2: note: previous statement is here if (cr6set) ^ 1 warning generated. ../drivers/net/ethernet/dec/tulip/dmfe.c:2217:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] switch(mode) { ^ ../drivers/net/ethernet/dec/tulip/dmfe.c:2214:2: note: previous statement is here if (cr6set) ^ 1 warning generated. This warning occurs because there is a space before the tab on these lines. Remove them so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. While we are here, adjust the default block in dmfe_init_module to have a proper break between the label and assignment and add a space between the switch and opening parentheses to avoid a checkpatch warning. Fixes: e1c3e501 ("[PATCH] initialisation cleanup for ULI526x-net-driver") Link: https://github.com/ClangBuiltLinux/linux/issues/795Signed-off-by: -
David S. Miller authored
Dan Murphy says: ==================== Fix Tx/Rx FIFO depth for DP83867 The DP83867 supports both the RGMII and SGMII modes. The Tx and Rx FIFO depths are configurable in these modes but may not applicable for both modes. When the device is configured for RGMII mode the Tx FIFO depth is applicable and for SGMII mode both Tx and Rx FIFO depth settings are applicable. When the driver was originally written only the RGMII device was available and there were no standard fifo-depth DT properties. The patchset converts the special ti,fifo-depth property to the standard tx-fifo-depth property while still allowing the ti,fifo-depth property to be set as to maintain backward compatibility. In addition to this change the rx-fifo-depth property support was added and only written when the device is configured for SGMII mode. ==================== Signed-off-by: -
Dan Murphy authored
This code changes the TI specific ti,fifo-depth to the common tx-fifo-depth property. The tx depth is applicable for both RGMII and SGMII modes of operation. rx-fifo-depth was added as well but this is only applicable for SGMII mode. So in summary if RGMII mode write tx fifo depth only if SGMII mode write both rx and tx fifo depths If the property is not populated in the device tree then set the value to the default values. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Reported-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Dan Murphy authored
Convert the ti,fifo-depth from a TI specific property to the common tx-fifo-depth property. Also add support for the rx-fifo-depth. These are optional properties for this device and if these are not available then the fifo depths are set to device default values. Signed-off-by:
-
