Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cdc_ncm disagrees with usbnet about how much framing overhead should
be counted in the tx_bytes statistics, and tries 'fix' this by
decrementing tx_bytes on the transmit path.  But statistics must never
be decremented except due to roll-over; this will thoroughly confuse
user-space.  Also, tx_bytes is only incremented by usbnet in the
completion path.

Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a
tx_bytes delta along with the tx_packets count.

Fixes: beeecd42 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>

Currently the usbnet core does not update the tx_packets statistic for
drivers with FLAG_MULTI_PACKET and there is no hook in the TX
completion path where they could do this.

cdc_ncm and dependent drivers are bumping tx_packets stat on the
transmit path while asix and sr9800 aren't updating it at all.

Add a packet count in struct skb_data so these drivers can fill it
in, initialise it to 1 for other drivers, and add the packet count
to the tx_packets statistic on completion.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes below warning by dynamically allocating memory

All warnings:

   drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c: In function
   'cctrl_tbl_show':
   >> drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:689:1: warning: the
   >> frame
   >> size of 1028 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A local route may have a lower hop_limit set than global routes do.

RFC 3756, Section 4.2.7, "Parameter Spoofing"

>   1.  The attacker includes a Current Hop Limit of one or another small
>       number which the attacker knows will cause legitimate packets to
>       be dropped before they reach their destination.

>   As an example, one possible approach to mitigate this threat is to
>   ignore very small hop limits.  The nodes could implement a
>   configurable minimum hop limit, and ignore attempts to set it below
>   said limit.
Signed-off-by: D.S. Ljungmark <ljungmark@modio.se>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ucc_geth was indicating link up after a port is administratively enabled even
when nothing is plugged in.  This causes user-space tools to see a spurious link
up the first time after boot.
Signed-off-by: Cliff Clark <cliff_clark@selinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
mlx4 driver RC fixes

Ido's patch should go to -stable of >= 3.14 too, the issue is older but it
hits us with VXLAN for which driver support dates there.

As for Jack's fix, for the time being, picking it to 4.0 is OK.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We occasionally see in procedure mlx4_GEN_EQE that the driver tries
to grab an uninitialized mutex.

This can occur in only one of two ways:
1. We are trying to generate an async event on an uninitialized slave.
2. We are trying to generate an async event on an illegal slave number
   ( < 0 or > persist->num_vfs) or an inactive slave.

To deal with #1: move the mutex initialization from specific slave init
sequence in procedure mlx_master_do_cmd to mlx4_multi_func_init() (so that
the mutex is always initialized for all slaves).

To deal with #2: check in procedure mlx4_GEN_EQE that the slave number
provided is in the proper range and that the slave is active.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Netdevice registration should be performed a the end of the driver
initialization flow. If we don't do that, after calling register_netdevice,
device callbacks may be issued by higher layers of the stack before
final configuration of the device is done.

For example (VXLAN configuration race), mlx4_SET_PORT_VXLAN was issued
after the register_netdev command. System network scripts may configure
the interface (UP) right after the registration, which also attach
unicast VXLAN steering rule, before mlx4_SET_PORT_VXLAN was called,
causing the firmware to fail the rule attachment.

Fixes: 837052d0 ("net/mlx4_en: Add netdev support for TCP/IP offloads of vxlan tunneling")
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2015-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

iwlwifi:

* avoid panic with lots of IBSS stations
* Fix dvm's behavior after suspend resume
* Allow to keep connection after CSA failure
* Remove a noisy by harmless WARN_ON
* New device IDs

rtlwifi:

* fix IOMMU mapping leak in AP mode

brcmfmac:

* disable MBSS feature for BCM43362 to get AP mode working again

ath9k:

* disable Transmit Power Control (TPC) again due to regressions

* fix beaconing issue with AP+STA setup
Signed-off-by: David S. Miller <davem@davemloft.net>

Master change notifications may occur other than when joining or
leaving a bridge, for example when being added to or removed from
a bond or Open vSwitch.

Previously in those cases rocker_port_bridge_leave() was called
which results in a null-pointer dereference as rocker_port->bridge_dev
is NULL because there is no bridge device.

This patch makes provision for doing nothing in such cases.

Fixes: 6c707945 ("rocker: implement L2 bridge offloading")
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case we move the whole dev group to another netns,
we should call for_each_netdev_safe(), otherwise we get
a soft lockup:

 NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ip:798]
 irq event stamp: 255424
 hardirqs last  enabled at (255423): [<ffffffff81a2aa95>] restore_args+0x0/0x30
 hardirqs last disabled at (255424): [<ffffffff81a2ad5a>] apic_timer_interrupt+0x6a/0x80
 softirqs last  enabled at (255422): [<ffffffff81079ebc>] __do_softirq+0x2c1/0x3a9
 softirqs last disabled at (255417): [<ffffffff8107a190>] irq_exit+0x41/0x95
 CPU: 0 PID: 798 Comm: ip Not tainted 4.0.0-rc4+ #881
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 task: ffff8800d1b88000 ti: ffff880119530000 task.ti: ffff880119530000
 RIP: 0010:[<ffffffff810cad11>]  [<ffffffff810cad11>] debug_lockdep_rcu_enabled+0x28/0x30
 RSP: 0018:ffff880119533778  EFLAGS: 00000246
 RAX: ffff8800d1b88000 RBX: 0000000000000002 RCX: 0000000000000038
 RDX: 0000000000000000 RSI: ffff8800d1b888c8 RDI: ffff8800d1b888c8
 RBP: ffff880119533778 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 000000000000b5c2 R12: 0000000000000246
 R13: ffff880119533708 R14: 00000000001d5a40 R15: ffff88011a7d5a40
 FS:  00007fc01315f740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 00007f367a120988 CR3: 000000011849c000 CR4: 00000000000007f0
 Stack:
  ffff880119533798 ffffffff811ac868 ffffffff811ac831 ffffffff811ac828
  ffff8801195337c8 ffffffff811ac8c9 ffff8801195339b0 ffff8801197633e0
  0000000000000000 ffff8801195339b0 ffff8801195337d8 ffffffff811ad2d7
 Call Trace:
  [<ffffffff811ac868>] rcu_read_lock+0x37/0x6e
  [<ffffffff811ac831>] ? rcu_read_unlock+0x5f/0x5f
  [<ffffffff811ac828>] ? rcu_read_unlock+0x56/0x5f
  [<ffffffff811ac8c9>] __fget+0x2a/0x7a
  [<ffffffff811ad2d7>] fget+0x13/0x15
  [<ffffffff811be732>] proc_ns_fget+0xe/0x38
  [<ffffffff817c7714>] get_net_ns_by_fd+0x11/0x59
  [<ffffffff817df359>] rtnl_link_get_net+0x33/0x3e
  [<ffffffff817df3d7>] do_setlink+0x73/0x87b
  [<ffffffff810b28ce>] ? trace_hardirqs_off+0xd/0xf
  [<ffffffff81a2aa95>] ? retint_restore_args+0xe/0xe
  [<ffffffff817e0301>] rtnl_newlink+0x40c/0x699
  [<ffffffff817dffe0>] ? rtnl_newlink+0xeb/0x699
  [<ffffffff81a29246>] ? _raw_spin_unlock+0x28/0x33
  [<ffffffff8143ed1e>] ? security_capable+0x18/0x1a
  [<ffffffff8107da51>] ? ns_capable+0x4d/0x65
  [<ffffffff817de5ce>] rtnetlink_rcv_msg+0x181/0x194
  [<ffffffff817de407>] ? rtnl_lock+0x17/0x19
  [<ffffffff817de407>] ? rtnl_lock+0x17/0x19
  [<ffffffff817de44d>] ? __rtnl_unlock+0x17/0x17
  [<ffffffff818327c6>] netlink_rcv_skb+0x4d/0x93
  [<ffffffff817de42f>] rtnetlink_rcv+0x26/0x2d
  [<ffffffff81830f18>] netlink_unicast+0xcb/0x150
  [<ffffffff8183198e>] netlink_sendmsg+0x501/0x523
  [<ffffffff8115cba9>] ? might_fault+0x59/0xa9
  [<ffffffff817b5398>] ? copy_from_user+0x2a/0x2c
  [<ffffffff817b7b74>] sock_sendmsg+0x34/0x3c
  [<ffffffff817b7f6d>] ___sys_sendmsg+0x1b8/0x255
  [<ffffffff8115c5eb>] ? handle_pte_fault+0xbd5/0xd4a
  [<ffffffff8100a2b0>] ? native_sched_clock+0x35/0x37
  [<ffffffff8109e94b>] ? sched_clock_local+0x12/0x72
  [<ffffffff8109eb9c>] ? sched_clock_cpu+0x9e/0xb7
  [<ffffffff810cadbf>] ? rcu_read_lock_held+0x3b/0x3d
  [<ffffffff811ac1d8>] ? __fcheck_files+0x4c/0x58
  [<ffffffff811ac946>] ? __fget_light+0x2d/0x52
  [<ffffffff817b8adc>] __sys_sendmsg+0x42/0x60
  [<ffffffff817b8b0c>] SyS_sendmsg+0x12/0x1c
  [<ffffffff81a29e32>] system_call_fastpath+0x12/0x17

Fixes: e7ed828f ("netlink: support setting devgroup parameters")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On s390x, gcc 4.8 compiles this part of tcp_v6_early_demux()

        struct dst_entry *dst = sk->sk_rx_dst;

        if (dst)
                dst = dst_check(dst, inet6_sk(sk)->rx_dst_cookie);

to code reading sk->sk_rx_dst twice, once for the test and once for
the argument of ip6_dst_check() (dst_check() is inline). This allows
ip6_dst_check() to be called with null first argument, causing a crash.

Protect sk->sk_rx_dst access by READ_ONCE() both in IPv4 and IPv6
TCP early demux code.

Fixes: 41063e9d ("ipv4: Early TCP socket demux.")
Fixes: c7109986 ("ipv6: Early TCP socket demux")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Statistics' state-machine in bnx2x driver must be synced with various driver
flows, but its current locking scheme manages to be wasteful [using 2 locks +
additional local variable] and prone to race-conditions at the same time,
as the state-machine and 'action' are being accessed under different locks.

In addition, current 'safe exec' isn't in fact safe, since the only guarantee
it gives is that DMA transactions are over, but ramrods might still be running.

This patch cleans up said logic, leaving us with a single lock for the entire
flow and removing the possible races.

Changes from v2:
	- Switched into mutex locking from semaphore locking.
	- Release locks on error flows.

Changes from v1:
	Failure to acquire lock fails flow instead of printing a warning and
	allowing access to the critical section.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.0-20150322' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2015-03-22

this is a pull-request of 7 patches for net/master.

Ahmed S. Darwish fixes another two problems in the kvaser_usb driver. A patch
by Colin Ian King for the gs_usb driver adds a missing check for kzalloc
allocation failures. Two patches by Stephane Grosjean for the peak_usb driver
add missing support for ISO / non-ISO mode switching. Andri Yngvason
contributes a patch to fix the state handling in the flexcan driver. The last
patch by Andreas Werner for the flexcan driver add missing EPROBE_DEFER
handling for the transceiver regulator.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Validate iov ranges before feeding them into iov_iter_init(), from
    Al Viro.

 2) We changed copy_from_msghdr_from_user() to zero out the msg_namelen
    is a NULL pointer is given for the msg_name.  Do the same in the
    compat code too.  From Catalin Marinas.

 3) Fix partially initialized tuples in netfilter conntrack helper, from
    Ian Wilson.

 4) Missing continue; statement in nft_hash walker can lead to crashes,
    from Herbert Xu.

 5) tproxy_tg6_check looks for IP6T_INV_PROTO in ->flags instead of
    ->invflags, fix from Pablo Neira Ayuso.

 6) Incorrect memory account of TCP FINs can result in negative socket
    memory accounting values.  Fix from Josh Hunt.

 7) Don't allow virtual functions to enable VLAN promiscuous mode in
    be2net driver, from Vasundhara Volam.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: nft_compat: set IP6T_F_PROTO flag if protocol is set
  cx82310_eth: wait for firmware to become ready
  net: validate the range we feed to iov_iter_init() in sys_sendto/sys_recvfrom
  net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour
  be2net: use PCI MMIO read instead of config read for errors
  be2net: restrict MODIFY_EQ_DELAY cmd to a max of 8 EQs
  be2net: Prevent VFs from enabling VLAN promiscuous mode
  tcp: fix tcp fin memory accounting
  ipv6: fix backtracking for throw routes
  net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}
  ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in udp6_ufo_fragment
  netfilter: xt_TPROXY: fix invflags check in tproxy_tg6_check()
  netfilter: restore rule tracing via nfnetlink_log
  netfilter: nf_tables: allow to change chain policy without hook if it exists
  netfilter: Fix potential crash in nft_hash walker
  netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()

Pull sparc fixes from David Miller:
 "Some perf bug fixes from David Ahern, and the fix for that nasty
  memmove() bug"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix several bugs in memmove().
  sparc: Touch NMI watchdog when walking cpus and calling printk
  sparc: perf: Add support M7 processor
  sparc: perf: Make counting mode actually work
  sparc: perf: Remove redundant perf_pmu_{en|dis}able calls

Firstly, handle zero length calls properly.  Believe it or not there
are a few of these happening during early boot.

Next, we can't just drop to a memcpy() call in the forward copy case
where dst <= src.  The reason is that the cache initializing stores
used in the Niagara memcpy() implementations can end up clearing out
cache lines before we've sourced their original contents completely.

For example, considering NG4memcpy, the main unrolled loop begins like
this:

     load   src + 0x00
     load   src + 0x08
     load   src + 0x10
     load   src + 0x18
     load   src + 0x20
     store  dst + 0x00

Assume dst is 64 byte aligned and let's say that dst is src - 8 for
this memcpy() call.  That store at the end there is the one to the
first line in the cache line, thus clearing the whole line, which thus
clobbers "src + 0x28" before it even gets loaded.

To avoid this, just fall through to a simple copy only mildly
optimized for the case where src and dst are 8 byte aligned and the
length is a multiple of 8 as well.  We could get fancy and call
GENmemcpy() but this is good enough for how this thing is actually
used.
Reported-by: David Ahern <david.ahern@oracle.com>
Reported-by: Bob Picco <bpicco@meloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'iwlwifi-for-kalle-2014-03-22' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes

* avoid panic with lots of IBSS stations
* Fix dvm's behavior after suspend resume
* Allow to keep connection after CSA failure
* Remove a noisy by harmless WARN_ON
* New device IDs

Pull bugfix for md from Neil Brown:
 "One fix for md in 4.0-rc4

  Regression in recent patch causes crash on error path"

* tag 'md/4.0-rc4-fix' of git://neil.brown.name/md:
  md: fix problems with freeing private data after ->run failure.

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Fix missing initialization of tuple structure in nfnetlink_cthelper
   to avoid mismatches when looking up to attach userspace helpers to
   flows, from Ian Wilson.

2) Fix potential crash in nft_hash when we hit -EAGAIN in
   nft_hash_walk(), from Herbert Xu.

3) We don't need to indicate the hook information to update the
   basechain default policy in nf_tables.

4) Restore tracing over nfnetlink_log due to recent rework to
   accomodate logging infrastructure into nf_tables.

5) Fix wrong IP6T_INV_PROTO check in xt_TPROXY.

6) Set IP6T_F_PROTO flag in nft_compat so we can use SYNPROXY6 and
   REJECT6 from xt over nftables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull driver core fixes from Greg KH:
 "Here are two bugfixes for things reported.  One regression in kernfs,
  and another issue fixed in the LZ4 code that was fixed in the
  "upstream" codebase that solves a reported kernel crash

  Both have been in linux-next for a while"

* tag 'driver-core-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  LZ4 : fix the data abort issue
  kernfs: handle poll correctly on 'direct_read' files.

Pull char/misc fixes from Greg KH:
 "Here are three fixes for 4.0-rc5 that revert 3 PCMCIA patches that
  were merged in 4.0-rc1 that cause regressions.  So let's revert them
  for now and they will be reworked and resent sometime in the future.

  All have been tested in linux-next for a while"

* tag 'char-misc-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "pcmcia: add a new resource manager for non ISA systems"
  Revert "pcmcia: fix incorrect bracketing on a test"
  Revert "pcmcia: add missing include for new pci resource handler"

Pull staging driver fixes from Greg KH:
 "Here are four small staging driver fixes, all for the vt6656 and
  vt6655 drivers, that resolve some reported issues with them.

  All of these patches have been in linux next for a while"

* tag 'staging-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  vt6655: Fix late setting of byRFType.
  vt6655: RFbSetPower fix missing rate RATE_12M
  staging: vt6656: vnt_rf_setpower: fix missing rate RATE_12M
  staging: vt6655: vnt_tx_packet fix dma_idx selection.

Pull tty/serial driver fix from Greg KH:
 "Here's a single 8250 serial driver that fixes a reported deadlock with
  the serial console and the tty driver.

  It's been in linux-next for a while now"

* tag 'tty-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Fix deadlock in LCR workaround

Pull USB / PHY driver fixes from Greg KH:
 "Here's a number of USB and PHY driver fixes for 4.0-rc5.

  The largest thing here is a revert of a gadget function driver patch
  that removes 500 lines of code.  Other than that, it's a number of
  reported bugs fixes and new quirk/id entries.

  All have been in linux-next for a while"

* tag 'usb-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: common: otg-fsm: only signal connect after switching to peripheral
  uas: Add US_FL_NO_ATA_1X for Initio Corporation controllers / devices
  USB: ehci-atmel: rework clk handling
  MAINTAINERS: add entry for USB OTG FSM
  usb: chipidea: otg: add a_alt_hnp_support response for B device
  phy: omap-usb2: Fix missing clk_prepare call when using old dt name
  phy: ti/omap: Fix modalias
  phy: core: Fixup return value of phy_exit when !pm_runtime_enabled
  phy: miphy28lp: Convert to devm_kcalloc and fix wrong sizof
  phy: miphy365x: Convert to devm_kcalloc and fix wrong sizeof
  phy: twl4030-usb: Remove redundant assignment for twl->linkstat
  phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0]
  phy: Find the right match in devm_phy_destroy()
  phy: rockchip-usb: Fixup rockchip_usb_phy_power_on failure path
  phy: ti-pipe3: Simplify ti_pipe3_dpll_wait_lock implementation
  phy: samsung-usb2: Remove NULL terminating entry from phys array
  phy: hix5hd2-sata: Check return value of platform_get_resource
  phy: exynos-dp-video: Kill exynos_dp_video_phy_pwr_isol function
  Revert "usb: gadget: zero: Add support for interrupt EP"
  Revert "xhci: Clear the host side toggle manually when endpoint is 'soft reset'"
  ...

ip6tables extensions check for this flag to restrict match/target to a
given protocol. Without this flag set, SYNPROXY6 returns an error.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Patrick McHardy <kaber@trash.net>

Return EPROBE_DEFER if Regulator returns EPROBE_DEFER

If the Flexcan driver is built into kernel and a regulator is used to
enable the CAN transceiver, the Flexcan driver may not use the regulator.

When initializing the Flexcan device with a regulator defined in the device
tree, but not initialized, the regulator subsystem returns EPROBE_DEFER, hence
the Flexcan init fails.

The solution for this is to return EPROBE_DEFER if regulator is not initialized
and wait until the regulator is initialized.
Signed-off-by: Andreas Werner <kernel@andy89.org>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Making sure that the bus-off state gets passed to can_change_state().
Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The PCAN USB (pro) FD adapters with firmware versions > 2.x support the
switching between ISO (default) and non-ISO conform bitstreams on the CAN bus.
The setting for the 2.x firmware adapters can be modified with the 'ip' tool
from the iproute2 package (option: fd-non-iso [on|off]).
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The PUCAN_CMD_RX_FRAME_(ENABLE|DISABLE) command has extended its purpose
and was therefore renamed to PUCAN_CMD_SET_(EN|DIS)_OPTION.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

smatch detected the following issue:
drivers/net/can/usb/gs_usb.c:904 gs_usb_probe() error:
   potential null dereference 'dev'.  (kzalloc returns null)

Add a check for null return from kzalloc and return -ENOMEM
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

USB endpoint's wMaxPacketSize field is an le16 entity. Use
appropriate le16_to_cpu macros to maintain endian independence.
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Current driver code arbitrarily assumes a max outstanding tx
value of 16 parallel transmissions. Meanwhile, the device
firmware provides its actual maximum inside its reply to the
CMD_GET_SOFTWARE_INFO message.

Under heavy tx traffic, if the interleaved transmissions count
increases above the limit reported by firmware, the firmware
breaks up badly, reports a massive list of internal errors, and
the candump traces hardly matches the actual frames sent and
received.

On the other hand, in certain models, the firmware can support
up to 48 tx URBs instead of just 16, increasing the driver
throughput by two-fold and reducing the possibility of -ENOBUFs.

Thus dynamically set the driver's max tx URBs value according
to firmware replies.
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Transmission of an AP beacon does not call the TX interrupt service routine,
which usually does the cleanup. Instead, cleanup is handled in a tasklet
completion routine. Unfortunately, this routine has a serious bug in that it does
not release the DMA mapping before it frees the skb, thus one IOMMU mapping is
leaked for each beacon. The test system failed with no free IOMMU mapping slots
approximately one hour after hostapd was used to start an AP.

This issue was reported and tested at https://github.com/lwfinger/rtlwifi_new/issues/30.
Reported-and-tested-by: Kevin Mullican <kevin@mullican.com>
Cc: Kevin Mullican <kevin@mullican.com>
Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>  [3.18+]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

When the device is powered up, some (older) firmware versions fail to work
properly if we send commands before the boot is complete (everything is OK
when the device is hot-plugged). The firmware indicates its ready status by
putting the link up.
Newer firmwares delay the first command so they don't suffer from this problem.
They also report the link being always up.

Wait for firmware to become ready (link up) before sending any commands and/or
data.

This also allows lowering CMD_TIMEOUT value to a reasonable time.

Tested with 4.1.0.9 (old) and 4.1.0.30 (new) firmware versions.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull slave dmaengine fixes from Vinod Koul:
 "Four fixes for dw, pl08x, imx-sdma and at_hdmac driver.  Nothing
  unusual here, simple fixes to these drivers"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: pl08x: Define capabilities for generic capabilities reporting
  dmaengine: dw: append MODULE_ALIAS for platform driver
  dmaengine: imx-sdma: switch to dynamic context mode after script loaded
  dmaengine: at_hdmac: Fix calculation of the residual bytes

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are fixes for recent regressions (PCI/ACPI resources and at91
  RTC locking), a stable-candidate powercap RAPL driver fix and two ARM
  cpuidle fixes (one stable-candidate too).

  Specifics:

   - Revert a recent PCI commit related to IRQ resources management that
     introduced a regression for drivers attempting to bind to devices
     whose previous drivers did not balance pci_enable_device() and
     pci_disable_device() as expected (Rafael J Wysocki).

   - Fix a deadlock in at91_rtc_interrupt() introduced by a typo in a
     recent commit related to wakeup interrupt handling (Dan Carpenter).

   - Allow the power capping RAPL (Running-Average Power Limit) driver
     to use different energy units for domains within one CPU package
     which is necessary to handle Intel Haswell EP processors correctly
     (Jacob Pan).

   - Improve the cpuidle mvebu driver's handling of Armada XP SoCs by
     updating the target residency and exit latency numbers for those
     chips (Sebastien Rannou).

   - Prevent the cpuidle mvebu driver from calling cpu_pm_enter() twice
     in a row before cpu_pm_exit() is called on the same CPU which
     breaks the core's assumptions regarding the usage of those
     functions (Gregory Clement)"

* tag 'pm+acpi-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "x86/PCI: Refine the way to release PCI IRQ resources"
  rtc: at91rm9200: double locking bug in at91_rtc_interrupt()
  powercap / RAPL: handle domains with different energy units
  cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs
  cpuidle: mvebu: Fix the CPU PM notifier usage

Pull drm updates from Dave Airlie:
 "A bunch of fixes across drivers:

  radeon:
     disable two ended allocation for now, it breaks some stuff

  amdkfd:
     misc fixes

  nouveau:
     fix irq loop problem, add basic support for GM206 (new hw)

  i915:
     fix some WARNs people were seeing

  exynos:
     fix some iommu interactions causing boot failures"

* git://people.freedesktop.org/~airlied/linux:
  drm/radeon: drop ttm two ended allocation
  drm/exynos: fix the initialization order in FIMD
  drm/exynos: fix typo config name correctly.
  drm/exynos: Check for NULL dereference of crtc
  drm/exynos: IS_ERR() vs NULL bug
  drm/exynos: remove unused files
  drm/i915: Make sure the primary plane is enabled before reading out the fb state
  drm/nouveau/bios: fix i2c table parsing for dcb 4.1
  drm/nouveau/device/gm100: Basic GM206 bring up (as copy of GM204)
  drm/nouveau/device: post write to NV_PMC_BOOT_1 when flipping endian switch
  drm/nouveau/gr/gf100: fix some accidental or'ing of buffer addresses
  drm/nouveau/fifo/nv04: remove the loop from the interrupt handler
  drm/radeon: Changing number of compute pipe lines
  drm/amdkfd: Fix SDMA queue init. in non-HWS mode
  drm/amdkfd: destroy mqd when destroying kernel queue
  drm/i915: Ensure plane->state->fb stays in sync with plane->fb