Guangbin Huang says:

====================
net: hns3: add support for PTP

This series adds PTP support for the HNS3 ethernet driver.

change log:
V1 -> V2:
1. use spinlock to prevent concurrency
2. add the handling when ptp_clock_register() returns NULL
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a debugfs interface for dumping ptp information, which
is helpful for debugging.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds PTP support for HNS3 ethernet driver.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: memory region rework, part 2

This is the second portion of a set of patches updating the IPA
memory region code.

In this portion (part 2), the focus is on adjusting the code so that
it no longer assumes the memory region descriptor array is indexed
by the region identifier.  This brings with it some related cleanup.

Three loops are changed so their loop index variable is an unsigned
rather than an enumerated type.

A set of functions is changed so a region identifier (rather than a
memory region descriptor pointer) is passed as argument, to simplify
their call sites.  This isn't entirely related or required, but I
think it improves the code.

A validation function for filter and route table memory regions is
changed to take memory region IDs, rather than determining which
region to validate based on a set of Boolean flags.

Finally, ipa_mem_find() is created to abstract getting a memory
descriptor based on its ID, and it is used everywhere rather than
indexing the array.  With that implemented, all of the memory
regions can be defined by arrays of entries defined without
providing index designators.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Finally the code handles the IPA memory region array in the
configuration data without assuming it is indexed by region ID.
Get rid of the array index designators where these arrays are
initialized.  As a result, there's no more need to define an
explicitly undefined memory region ID, so get rid of that.

Change ipa_mem_find() so it no longer assumes the ipa->mem[] array
is indexed by memory region ID.  Instead, have it search the array
for the entry having the requested memory ID, and return the address
of the descriptor if found.  Otherwise return NULL.

Stop allowing memory regions to be defined with zero size and zero
canary value.  Check for this condition in ipa_mem_valid_one().
As a result, it is not necessary to check for this case in
ipa_mem_config().

Finally, there is no need for IPA_MEM_UNDEFINED to be defined any
more, so get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a new function that abstracts finding information about a
region in IPA-local memory, given its memory region ID.  For now it
simply uses the region ID as an index into the IPA memory array.
If the region is not defined, ipa_mem_find() returns a null pointer.

Update all code that accesses the ipa->mem[] array directly to use
ipa_mem_find() instead.  The return value must be checked for null
when optional memory regions are sought.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stop passing most of the Boolean flags to ipa_table_valid_one(), and
just pass a memory region ID to it instead.  We still need to
indicate whether we're operating on a routing or filter table.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a memory region ID rather than the address of a memory region
descriptor to ipa_table_reset_add() to simplify callers.  Similarly,
pass memory region IDs to ipa_table_init_add().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a memory region ID rather than the address of a memory region
descriptor to ipa_mem_zero_region_add() to simplify callers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a memory region ID rather than the address of a memory region
descriptor to ipa_filter_reset_table(), to simplify callers.

We can eliminate the check for a zero region size in this function
because ipa_table_reset_add() checks that before adding anything to
the transaction.

Note that here and in subsequent commits there is no need to check
whether a memory region exists, because we will have already
verified that during initialization.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do some general cleanup in ipa_cmd_header_valid():
  - Delay assigning the mem variable until just before it's used.
  - Assign the maximum offset and size values together.
  - Improve comments explaining the single range of memory being
    made up of a modem portion and an AP portion.
  - Record the offset of the combined range in a local variable.
  - Do the initial size assignment right after assigning the offset.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change ipa_mem_valid() to iterate over the entries using a u32 index
variable rather than using a memory region ID.  Use the ID found
inside the memory descriptor rather than the loop index.

Change ipa_mem_size_valid() to iterate over the entries but without
assuming the array index is the memory region ID.  "Empty" entries
will have zero size; and we'll temporarily assume such entries have
zero offset as well (they all do, currently).

Similarly, don't assume the mem[] array is indexed by ID in
ipa_mem_config().  There, "empty" entries will have a zero canary
count, so no special assumptions are needed to handle them correctly.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow the device to be initialized at a later time if
it is not available at boot. The device will be allowed to probe but
will be given a "down" state. After completing device probe and
registering the net device, the driver will await an interrupt signal
from its partner device, indicating that it is ready for boot. The
driver will schedule a work event to perform the necessary procedure
and begin operation.
Co-developed-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Cristobal Forno <cforno12@linux.ibm.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vadym Kochan says:

====================
net: marvell: prestera: add LAG support

The following features are supported:

    - LAG basic operations
        - create/delete LAG
        - add/remove a member to LAG
        - enable/disable member in LAG
    - LAG Bridge support
    - LAG VLAN support
    - LAG FDB support

Limitations:

    - Only HASH lag tx type is supported
    - The Hash parameters are not configurable. They are applied
      during the LAG creation stage.
    - Enslaving a port to the LAG device that already has an
      upper device is not supported.

Changes extracted from:

    https://lkml.org/lkml/2021/2/3/877

and marked with "v2".

v2:

    There are 2 additional preparation patches which simplifies the
    netdev topology handling.

    1) Initialize 'lag' with NULL in prestera_lag_create()             [suggested by Vladimir Oltean]

    2) Use -ENOSPC in prestera_lag_port_add() if max lag               [suggested by Vladimir Oltean]
       numbers were reached.

    3) Do not propagate netdev events to prestera_switchdev            [suggested by Vladimir Oltean]
       but call bridge specific funcs. It simplifies the code.

    4) Check on info->link_up in prestera_netdev_port_lower_event()    [suggested by Vladimir Oltean]

    5) Return -EOPNOTSUPP in prestera_netdev_port_event() in case      [suggested by Vladimir Oltean]
       LAG hashing mode is not supported.

    6) Do not pass "lower" netdev to bridge join/leave functions.      [suggested by Vladimir Oltean]
       It is not need as offloading settings applied on particular
       physical port. It requires to do extra upper dev lookup
       in case port is in the LAG which is in the bridge on vlans add/del.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The following features are supported:

    - LAG basic operations
        - create/delete LAG
        - add/remove a member to LAG
        - enable/disable member in LAG
    - LAG Bridge support
    - LAG VLAN support
    - LAG FDB support

Limitations:

    - Only HASH lag tx type is supported
    - The Hash parameters are not configurable. They are applied
      during the LAG creation stage.
    - Enslaving a port to the LAG device that already has an
      upper device is not supported.
Co-developed-by: Andrii Savka <andrii.savka@plvision.eu>
Signed-off-by: Andrii Savka <andrii.savka@plvision.eu>
Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu>
Co-developed-by: Vadym Kochan <vkochan@marvell.com>
Signed-off-by: Vadym Kochan <vkochan@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace prestera_bridge_port_event(...) by
prestera_bridge_port_join(...) and prestera_bridge_port_leave().

It simplifies the code by reading netdev event specific handling only
once in prestera_main.c
Signed-off-by: Vadym Kochan <vkochan@marvell.com>
CC: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move handling of PRECHANGEUPPER event from prestera_switchdev to
prestera_main which is responsible for basic netdev events handling
and routing them to related module.
Signed-off-by: Vadym Kochan <vkochan@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The platform_get_irq() prints error message telling that interrupt is
missing,hence there is no need to duplicated that message in the
drivers.
Signed-off-by: Tan Zhongjun <tanzhongjun@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add description for `tfrc_invert_loss_event_rate` to fix the W=1 warnings:

 net/dccp/ccids/lib/tfrc_equation.c:695: warning: Function parameter or
  member 'loss_event_rate' not described in 'tfrc_invert_loss_event_rate'
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use devm_platform_get_and_ioremap_resource() to simplify
code and avoid a null-ptr-deref by checking 'res' in it.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 5a558611 ("net: stmmac: support FPE link partner
hand-shaking procedure") introduced the following coverity warning:

  "Parse warning (PW.MIXED_ENUM_TYPE)"
  "1. mixed_enum_type: enumerated type mixed with another type"

This is due to both "lo_state" and "lp_sate" which their datatype are
enum stmmac_fpe_state type, and being assigned with "FPE_EVENT_UNKNOWN"
which is a macro-defined of 0. Fixed this by assigned both these
variables with the correct enum value.

Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Peng Li says:

====================
net: ixp4xx_hss: clean up some code style issues

This patchset clean up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Braces {} should be used on all arms of this statement.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Networking block comments don't use an empty /* line,
use /* Comment...

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

This patch fixes the comments style issues.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the chackpatch.pl,
space prohibited after that open parenthesis '('.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add space required before the open parenthesis '('.
Add space required after that close brace '}'.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the checkpatch error as "foo* bar" and should be "foo *bar",
and "(foo*)" should be "(foo *)".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a spelling mistake.
Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the use of copular verb.
Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the use of indefinite article.
Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>