- 28 Feb, 2018 29 commits
-
-
Ross Zwisler authored
commit d0f0931d upstream. When the pmd_devmap() checks were added by 5c7fb56e ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd") to add better support for DAX huge pages, they were all added to the end of if() statements after existing pmd_trans_huge() checks. So, things like: - if (pmd_trans_huge(*pmd)) + if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd)) When further checks were added after pmd_trans_unstable() checks by commit 7267ec00 ("mm: postpone page table allocation until we have page to map") they were also added at the end of the conditional: + if (pmd_trans_unstable(fe->pmd) || pmd_devmap(*fe->pmd)) This ordering is fine for pmd_trans_huge(), but doesn't work for pmd_trans_unstable(). This is because DAX huge pages trip the bad_pmd() check inside of pmd_none_or_trans_huge_or_clear_bad() (called by pmd_trans_unstable()), which prints out a warning and returns 1. So, we do end up doing the right thing, but only after spamming dmesg with suspicious looking messages: mm/pgtable-generic.c:39: bad pmd ffff8808daa49b88(84000001006000a5) Reorder these checks in a helper so that pmd_devmap() is checked first, avoiding the error messages, and add a comment explaining why the ordering is important. Fixes: commit 7267ec00 ("mm: postpone page table allocation until we have page to map") Link: http://lkml.kernel.org/r/20170522215749.23516-1-ross.zwisler@linux.intel.comSigned-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit 4b34968e upstream. The asymmetric key type allows an X.509 certificate to be added even if its signature's hash algorithm is not available in the crypto API. In that case 'payload.data[asym_auth]' will be NULL. But the key restriction code failed to check for this case before trying to use the signature, resulting in a NULL pointer dereference in key_or_keyring_common() or in restrict_link_by_signature(). Fix this by returning -ENOPKG when the signature is unsupported. Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled and keyctl has support for the 'restrict_keyring' command: keyctl new_session keyctl restrict_keyring @s asymmetric builtin_trusted openssl req -new -sha512 -x509 -batch -nodes -outform der \ | keyctl padd asymmetric desc @s Fixes: a511e1af ("KEYS: Move the point of trust determination to __key_link()") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Eric Biggers authored
When commit 4be5a281 ("binder: check for binder_thread allocation failure in binder_poll()") was applied to 4.4-stable and 4.9-stable it was forgotten to release the global binder lock in the new error path. The global binder lock wasn't removed until v4.14, by commit a60b890f ("binder: remove global binder lock"). Fix the new error path to release the lock. Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Kai-Heng Feng authored
commit 6e59de20 upstream. The affected system (0x0813) is pretty similar to another one (0x0812), it also needs to use ATPX power control. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit 458d876e upstream. We only support vga_switcheroo and runtime pm on PX/HG systems so forcing runpm to 1 doesn't do anything useful anyway. Only call vga_switcheroo_init_domain_pm_ops() for PX/HG so that the cleanup path is correct as well. This mirrors what radeon does as well. v2: rework the patch originally sent by Lukas (Alex) Acked-by:
Lukas Wunner <lukas@wunner.de> Reported-by:
-
Alex Deucher authored
commit 052c2990 upstream. Add quirks for handling PX/HG systems. In this case, add a quirk for a weston dGPU that only seems to properly power down using ATPX power control rather than HG (_PR3). v2: append a new weston XT Signed-off-by:
Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit f2e5262f upstream. Fixes stability issues. v2: clamp sclk to 600 Mhz Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370Acked-by:
-
Yoshihiro Shimoda authored
commit 17aa31f1 upstream. This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3 ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Jack Pham authored
commit 6cf439e0 upstream. During _ffs_func_bind(), the received descriptors are evaluated to prepare for binding with the gadget in order to allocate endpoints and optionally set up OS descriptors. However, the high- and super-speed descriptors are only parsed based on whether the gadget_is_dualspeed() and gadget_is_superspeed() calls are true, respectively. This is a problem in case a userspace program always provides all of the {full,high,super,OS} descriptors when configuring a function. Then, for example if a gadget device is not capable of SuperSpeed, the call to ffs_do_descs() for the SS descriptors is skipped, resulting in an incorrect offset calculation for the vla_ptr when moving on to the OS descriptors that follow. This causes ffs_do_os_descs() to fail as it is now looking at the SS descriptors' offset within the raw_descs buffer instead. _ffs_func_bind() should evaluate the descriptors unconditionally, so remove the checks for gadget speed. Fixes: f0175ab5 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Co-Developed-by:
Mayank Rana <mrana@codeaurora.org> Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
-
Bin Liu authored
commit 44eb5e12 upstream. This reverts commit dbac5d07. commit dbac5d07 ("usb: musb: host: don't start next rx urb if current one failed") along with commit b5801212 ("usb: musb: host: clear rxcsr error bit if set") try to solve the issue described in [1], but the latter alone is sufficient, and the former causes the issue as in [2], so now revert it. [1] https://marc.info/?l=linux-usb&m=146173995117456&w=2 [2] https://marc.info/?l=linux-usb&m=151689238420622&w=2 Cc: stable@vger.kernel.org # v4.7+ Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Karsten Koop authored
commit 52ad2bd8 upstream. This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by:
Karsten Koop <kkoop@ld-didactic.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Thinh Nguyen authored
commit 61800263 upstream. There are 2 control endpoint structures for DWC3. However, the driver only updates the OUT direction control endpoint structure during ConnectDone event. DWC3 driver needs to update the endpoint max packet size for control IN endpoint as well. If the max packet size is not properly set, then the driver will incorrectly calculate the data transfer size and fail to send ZLP for HS/FS 3-stage control read transfer. The fix is simply to update the max packet size for the ep0 IN direction during ConnectDone event. Cc: stable@vger.kernel.org Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 06998a75 upstream. Similar to commit e10aec65 ("drm/edid: Add 6 bpc quirk for display AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support 6bpc instead of 8 bpc. Hence, use 6 bpc quirk for this panel. Fixes: 196f954e ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"") BugLink: https://bugs.launchpad.net/bugs/1749420Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180218085359.7817-1-kai.heng.feng@canonical.comSigned-off-by:
-
Jack Stocker authored
commit 7a1646d9 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by:
Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Michael Weiser authored
commit 5ee39a71 upstream. aarch64 unhandled signal kernel messages are very verbose, suggesting them to be more of a debugging aid: sigsegv[33]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000046, in sigsegv[400000+71000] CPU: 1 PID: 33 Comm: sigsegv Tainted: G W 4.15.0-rc3+ #3 Hardware name: linux,dummy-virt (DT) pstate: 60000000 (nZCv daif -PAN -UAO) pc : 0x4003f4 lr : 0x4006bc sp : 0000fffffe94a060 x29: 0000fffffe94a070 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 00000000004001b0 x23: 0000000000486ac8 x22: 00000000004001c8 x21: 0000000000000000 x20: 0000000000400be8 x19: 0000000000400b30 x18: 0000000000484728 x17: 000000000865ffc8 x16: 000000000000270f x15: 00000000000000b0 x14: 0000000000000002 x13: 0000000000000001 x12: 0000000000000000 x11: 0000000000000000 x10: 0008000020008008 x9 : 000000000000000f x8 : ffffffffffffffff x7 : 0004000000000000 x6 : ffffffffffffffff x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000004003e4 x2 : 0000fffffe94a1e8 x1 : 000000000000000a x0 : 0000000000000000 Disable them by default, so they can be enabled using /proc/sys/debug/exception-trace. Cc: <stable@vger.kernel.org> Signed-off-by:
Michael Weiser <michael.weiser@gmx.de> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
AMAN DEEP authored
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() commit 46408ea5 upstream. There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Aman Deep <aman.deep@samsung.com> Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Shigeru Yoshida authored
commit b2685bda upstream. Running io_watchdog_func() while ohci_urb_enqueue() is running can cause a race condition where ohci->prev_frame_no is corrupted and the watchdog can mis-detect following error: ohci-platform 664a0800.usb: frame counter not updating; disabled ohci-platform 664a0800.usb: HC died; cleaning up Specifically, following scenario causes a race condition: 1. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 2. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 3. ohci_urb_enqueue() sets ohci->prev_frame_no to a frame number read by ohci_frame_no(ohci) 4. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 5. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section 6. Later, ohci_urb_enqueue() is called 7. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 8. The timer scheduled on step 4 expires and io_watchdog_func() runs 9. io_watchdog_func() calls spin_lock_irqsave(&ohci->lock, flags) and waits on it because ohci_urb_enqueue() is already in the critical section on step 7 10. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 11. ohci_urb_enqueue() sets ohci->prev_frame_no to new frame number read by ohci_frame_no(ohci) because the frame number proceeded between step 3 and 6 12. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 13. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section, then wake up io_watchdog_func() which is waiting on step 9 14. io_watchdog_func() enters the critical section 15. io_watchdog_func() calls ohci_frame_no(ohci) and set frame_no variable to the frame number 16. io_watchdog_func() compares frame_no and ohci->prev_frame_no On step 16, because this calling of io_watchdog_func() is scheduled on step 4, the frame number set in ohci->prev_frame_no is expected to the number set on step 3. However, ohci->prev_frame_no is overwritten on step 11. Because step 16 is executed soon after step 11, the frame number might not proceed, so ohci->prev_frame_no must equals to frame_no. To address above scenario, this patch introduces a special sentinel value IO_WATCHDOG_OFF and set this value to ohci->prev_frame_no when the watchdog is not pending or running. When ohci_urb_enqueue() schedules the watchdog (step 4 and 12 above), it compares ohci->prev_frame_no to IO_WATCHDOG_OFF so that ohci->prev_frame_no is not overwritten while io_watchdog_func() is running. Signed-off-by:
Shigeru Yoshida <Shigeru.Yoshida@windriver.com> Signed-off-by:
Haiqing Bai <Haiqing.Bai@windriver.com> Acked-by:
-
Casey Leedom authored
commit 7dcf688d upstream. We've run into a problem where our device is attached to a Virtual Machine and the use of the new pci_set_vpd_size() API doesn't help. The VM kernel has been informed that the accesses are okay, but all of the actual VPD Capability Accesses are trapped down into the KVM Hypervisor where it goes ahead and imposes the silent denials. The right idea is to follow the kernel.org commit 1c7de2b4 ("PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)") which Alexey Kardashevskiy authored to establish a PCI Quirk for our T3-based adapters. This commit extends that PCI Quirk to cover Chelsio T4 devices and later. The advantage of this approach is that the VPD Size gets set early in the Base OS/Hypervisor Boot and doesn't require that the cxgb4 driver even be available in the Base OS/Hypervisor. Thus PF4 can be exported to a Virtual Machine and everything should work. Fixes: 67e65879 ("cxgb4: Set VPD size so we can read both VPD structures") Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Shanker Donthineni authored
commit 21ec30c0 upstream. A DMB instruction can be used to ensure the relative order of only memory accesses before and after the barrier. Since writes to system registers are not memory operations, barrier DMB is not sufficient for observability of memory accesses that occur before ICC_SGI1R_EL1 writes. A DSB instruction ensures that no instructions that appear in program order after the DSB instruction, can execute until the DSB instruction has completed. Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com>, Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Arnd Bergmann authored
commit 85c615eb upstream. GCC-8 shows a warning for the x86 oprofile code that copies per-CPU data from CPU 0 to all other CPUs, which when building a non-SMP kernel turns into a memcpy() with identical source and destination pointers: arch/x86/oprofile/nmi_int.c: In function 'mux_clone': arch/x86/oprofile/nmi_int.c:285:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict] memcpy(per_cpu(cpu_msrs, cpu).multiplex, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ per_cpu(cpu_msrs, 0).multiplex, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(struct op_msr) * model->num_virt_counters); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/oprofile/nmi_int.c: In function 'nmi_setup': arch/x86/oprofile/nmi_int.c:466:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] arch/x86/oprofile/nmi_int.c:470:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] I have analyzed a number of such warnings now: some are valid and the GCC warning is welcome. Others turned out to be false-positives, and GCC was changed to not warn about those any more. This is a corner case that is a false-positive but the GCC developers feel it's better to keep warning about it. In this case, it seems best to work around it by telling GCC a little more clearly that this code path is never hit with an IS_ENABLED() configuration check. Cc:stable as we also want old kernels to build cleanly with GCC-8. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Sebor <msebor@gcc.gnu.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oprofile-list@lists.sf.net Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180220205826.2008875-1-arnd@arndb.de Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84095Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lars-Peter Clausen authored
commit f027e0b3 upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52f ("staging:iio: Add common ADIS library") Reported-by:
Robin Getz <Robin.Getz@analog.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Stefan Windfeldt-Prytz authored
commit 4cd140bd upstream. If no iio buffer has been set up and poll is called return 0. Without this check there will be a null pointer dereference when calling poll on a iio driver without an iio buffer. Cc: stable@vger.kernel.org Signed-off-by:
Stefan Windfeldt-Prytz <stefan.windfeldt@axis.com> Signed-off-by:
-
Leon Romanovsky authored
commit 3f802b16 upstream. The command number is not bounds checked against the command mask before it is shifted, resulting in an ubsan hit. This does not cause malfunction since the command number is eventually bounds checked, but we can make this ubsan clean by moving the bounds check to before the mask check. ================================================================================ UBSAN: Undefined behaviour in drivers/infiniband/core/uverbs_main.c:647:21 shift exponent 207 is too large for 64-bit type 'long long unsigned int' CPU: 0 PID: 446 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #61 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 __ubsan_handle_shift_out_of_bounds+0x293/0x2f7 ? debug_check_no_locks_freed+0x340/0x340 ? __ubsan_handle_load_invalid_value+0x19b/0x19b ? lock_acquire+0x440/0x440 ? lock_acquire+0x19d/0x440 ? __might_fault+0xf4/0x240 ? ib_uverbs_write+0x68d/0xe20 ib_uverbs_write+0x68d/0xe20 ? __lock_acquire+0xcf7/0x3940 ? uverbs_devnode+0x110/0x110 ? cyc2ns_read_end+0x10/0x10 ? sched_clock_cpu+0x18/0x200 ? sched_clock_cpu+0x18/0x200 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? __fget+0x35b/0x5d0 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x448e29 RSP: 002b:00007f033f567c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f033f5686bc RCX: 0000000000448e29 RDX: 0000000000000060 RSI: 0000000020001000 RDI: 0000000000000012 RBP: 000000000070bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000056a0 R14: 00000000006e8740 R15: 0000000000000000 ================================================================================ Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.5 Fixes: 2dbd5186 ("IB/core: IB/core: Allow legacy verbs through extended interfaces") Reported-by:
Noa Osherovich <noaos@mellanox.com> Reviewed-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Eric Biggers authored
commit 971b42c0 upstream. When pkcs7_verify_sig_chain() is building the certificate chain for a SignerInfo using the certificates in the PKCS#7 message, it is passing the wrong arguments to public_key_verify_signature(). Consequently, when the next certificate is supposed to be used to verify the previous certificate, the next certificate is actually used to verify itself. An attacker can use this bug to create a bogus certificate chain that has no cryptographic relationship between the beginning and end. Fortunately I couldn't quite find a way to use this to bypass the overall signature verification, though it comes very close. Here's the reasoning: due to the bug, every certificate in the chain beyond the first actually has to be self-signed (where "self-signed" here refers to the actual key and signature; an attacker might still manipulate the certificate fields such that the self_signed flag doesn't actually get set, and thus the chain doesn't end immediately). But to pass trust validation (pkcs7_validate_trust()), either the SignerInfo or one of the certificates has to actually be signed by a trusted key. Since only self-signed certificates can be added to the chain, the only way for an attacker to introduce a trusted signature is to include a self-signed trusted certificate. But, when pkcs7_validate_trust_one() reaches that certificate, instead of trying to verify the signature on that certificate, it will actually look up the corresponding trusted key, which will succeed, and then try to verify the *previous* certificate, which will fail. Thus, disaster is narrowly averted (as far as I could tell). Fixes: 6c2dc5ae ("X.509: Extract signature digest and make self-signed cert checks earlier") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by:
-
Eric Biggers authored
commit 437499ee upstream. The X.509 parser mishandles the case where the certificate's signature's hash algorithm is not available in the crypto API. In this case, x509_get_sig_params() doesn't allocate the cert->sig->digest buffer; this part seems to be intentional. However, public_key_verify_signature() is still called via x509_check_for_self_signed(), which triggers the 'BUG_ON(!sig->digest)'. Fix this by making public_key_verify_signature() return -ENOPKG if the hash buffer has not been allocated. Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled: openssl req -new -sha512 -x509 -batch -nodes -outform der \ | keyctl padd asymmetric desc @s Fixes: 6c2dc5ae ("X.509: Extract signature digest and make self-signed cert checks earlier") Reported-by:
Paolo Valente <paolo.valente@linaro.org> Cc: Paolo Valente <paolo.valente@linaro.org> Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by:
-
Arnd Bergmann authored
commit bee92d06 upstream. gcc-8 warns about some obviously incorrect code: net/mac80211/cfg.c: In function 'cfg80211_beacon_dup': net/mac80211/cfg.c:2896:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] From the context, I conclude that we want to copy from beacon into new_beacon, as we do in the rest of the function. Cc: stable@vger.kernel.org Fixes: 73da7d5b ("mac80211: add channel switch command and beacon callbacks") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Tyrel Datwyler authored
commit c3981365 upstream. The fcp_rsp_info structure as defined in the FC spec has an initial 3 bytes reserved field. The ibmvfc driver mistakenly defined this field as 4 bytes resulting in the rsp_code field being defined in what should be the start of the second reserved field and thus always being reported as zero by the driver. Ideally, we should wire ibmvfc up with libfc for the sake of code deduplication, and ease of maintaining standardized structures in a single place. However, for now simply fixup the definition in ibmvfc for backporting to distros on older kernels. Wiring up with libfc will be done in a followup patch. Cc: <stable@vger.kernel.org> Reported-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Max Filippov authored
commit 6ac5a11d upstream. Xtensa memory initialization code frees high memory pages without checking whether they are in the reserved memory regions or not. That results in invalid value of totalram_pages and duplicate page usage by CMA and highmem. It produces a bunch of BUGs at startup looking like this: BUG: Bad page state in process swapper pfn:70800 page:be60c000 count:0 mapcount:-127 mapping: (null) index:0x1 flags: 0x80000000() raw: 80000000 00000000 00000001 ffffff80 00000000 be60c014 be60c014 0000000a page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G B 4.16.0-rc1-00015-g7928b2cb-dirty #23 Stack: bd839d33 00000000 00000018 ba97b64c a106578c bd839d70 be60c000 00000000 a1378054 bd86a000 00000003 ba97b64c a1066166 bd839da0 be60c000 ffe00000 a1066b58 bd839dc0 be504000 00000000 000002f4 bd838000 00000000 0000001e Call Trace: [<a1065734>] bad_page+0xac/0xd0 [<a106578c>] free_pages_check_bad+0x34/0x4c [<a1066166>] __free_pages_ok+0xae/0x14c [<a1066b58>] __free_pages+0x30/0x64 [<a1365de5>] init_cma_reserved_pageblock+0x35/0x44 [<a13682dc>] cma_init_reserved_areas+0xf4/0x148 [<a10034b8>] do_one_initcall+0x80/0xf8 [<a1361c16>] kernel_init_freeable+0xda/0x13c [<a125b59d>] kernel_init+0x9/0xd0 [<a1004304>] ret_from_kernel_thread+0xc/0x18 Only free high memory pages that are not reserved. Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Paolo Abeni authored
commit 01ea306f upstream. The Syzbot reported a possible deadlock in the netfilter area caused by rtnl lock, xt lock and socket lock being acquired with a different order on different code paths, leading to the following backtrace: Reviewed-by:
Xin Long <lucien.xin@gmail.com> ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #301 Not tainted ------------------------------------------------------ syzkaller233489/4179 is trying to acquire lock: (rtnl_mutex){+.+.}, at: [<0000000048e996fd>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 but task is already holding lock: (&xt[i].mutex){+.+.}, at: [<00000000328553a2>] xt_find_table_lock+0x3e/0x3e0 net/netfilter/x_tables.c:1041 which lock already depends on the new lock. === Since commit 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope"), we already acquire the socket lock in the innermost scope, where needed. In such commit I forgot to remove the outer-most socket lock from the getsockopt() path, this commit addresses the issues dropping it now. v1 -> v2: fix bad subj, added relavant 'fixes' tag Fixes: 22265a5c ("netfilter: xt_TEE: resolve oif using netdevice notifiers") Fixes: 202f59af ("netfilter: ipt_CLUSTERIP: do not hold dev") Fixes: 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope") Reported-by: syzbot+ddde1c7b7ff7442d7f2d@syzkaller.appspotmail.com Suggested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Tested-by:
Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by:
-
- 25 Feb, 2018 11 commits
-
-
Greg Kroah-Hartman authored
-
Kamil Konieczny authored
commit c927b080 upstream. In AES-ECB mode crypt is done with key only, so any use of IV can cause kernel Oops. Use IV only in AES-CBC and AES-CTR. Signed-off-by:
Kamil Konieczny <k.konieczny@partner.samsung.com> Reported-by:
Anand Moon <linux.amoon@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Tested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jan Dakinevich authored
commit bcdde302 upstream - Expose all invalidation types to the L1 - Reject invvpid instruction, if L1 passed zero vpid value to single context invalidations Signed-off-by:
Jan Dakinevich <jan.dakinevich@gmail.com> Tested-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> [jwang: port to 4.4] Signed-off-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
-
Jan Dakinevich authored
commit 63f3ac48 upstream - Remove VMX_EPT_EXTENT_INDIVIDUAL_ADDR, since there is no such type of EPT invalidation - Add missing VPID types names Signed-off-by:
-
Wanpeng Li authored
commit 9a6e7c39 upstream. qemu-system-x86-8600 [004] d..1 7205.687530: kvm_entry: vcpu 2 qemu-system-x86-8600 [004] .... 7205.687532: kvm_exit: reason EXCEPTION_NMI rip 0xffffffffa921297d info ffffeb2c0e44e018 80000b0e qemu-system-x86-8600 [004] .... 7205.687532: kvm_page_fault: address ffffeb2c0e44e018 error_code 0 qemu-system-x86-8600 [004] .... 7205.687620: kvm_try_async_get_page: gva = 0xffffeb2c0e44e018, gfn = 0x427e4e qemu-system-x86-8600 [004] .N.. 7205.687628: kvm_async_pf_not_present: token 0x8b002 gva 0xffffeb2c0e44e018 kworker/4:2-7814 [004] .... 7205.687655: kvm_async_pf_completed: gva 0xffffeb2c0e44e018 address 0x7fcc30c4e000 qemu-system-x86-8600 [004] .... 7205.687703: kvm_async_pf_ready: token 0x8b002 gva 0xffffeb2c0e44e018 qemu-system-x86-8600 [004] d..1 7205.687711: kvm_entry: vcpu 2 After running some memory intensive workload in guest, I catch the kworker which completes the GUP too quickly, and queues an "Page Ready" #PF exception after the "Page not Present" exception before the next vmentry as the above trace which will result in #DF injected to guest. This patch fixes it by clearing the queue for "Page not Present" if "Page Ready" occurs before the next vmentry since the GUP has already got the required page and shadow page table has already been fixed by "Page Ready" handler. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Fixes: 7c90705b ("KVM: Inject asynchronous page fault into a PV guest if page is swapped out.") [Changed indentation and added clearing of injected. - Radim] Signed-off-by:
-
Borislav Petkov authored
commit dac6ca24 upstream. With CONFIG_DEBUG_PREEMPT enabled, I get: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2+ #2 Call Trace: dump_stack check_preemption_disabled debug_smp_processor_id save_microcode_in_initrd_amd ? microcode_init save_microcode_in_initrd ... because, well, it says it above, we're using smp_processor_id() in preemptible code. But passing the CPU number is not really needed. It is only used to determine whether we're on the BSP, and, if so, to save the microcode patch for early loading. [ We don't absolutely need to do it on the BSP but we do that customarily there. ] Instead, convert that function parameter to a boolean which denotes whether the patch should be saved or not, thereby avoiding the use of smp_processor_id() in preemptible code. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170528200414.31305-1-bp@alien8.deSigned-off-by:
-
Arnd Bergmann authored
On linux-4.4 and linux-4.9 we get a warning about an array that is never initialized when CONFIG_REGULATOR is disabled: drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_probe': drivers/usb/phy/phy-msm-usb.c:1911:14: error: 'regs[0].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized] motg->vddcx = regs[0].consumer; ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~ drivers/usb/phy/phy-msm-usb.c:1912:14: error: 'regs[1].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized] motg->v3p3 = regs[1].consumer; ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~ drivers/usb/phy/phy-msm-usb.c:1913:14: error: 'regs[2].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized] motg->v1p8 = regs[2].consumer; This adds a Kconfig dependency for it. In newer kernels, the driver no longer exists, so this is only needed for stable kernels. Signed-off-by:
-
Arnd Bergmann authored
commit 12f043ff upstream. With 4 levels of 16KB pages, we get this warning about the fact that we are copying a whole page into an array that is declared as having only two pointers for the top level of the page table: arch/arm64/mm/mmu.c: In function 'paging_init': arch/arm64/mm/mmu.c:528:2: error: 'memcpy' writing 16384 bytes into a region of size 16 overflows the destination [-Werror=stringop-overflow=] This is harmless since we actually reserve a whole page in the definition of the array that comes from, and just the extern declaration is short. The pgdir is initialized to zero either way, so copying the actual entries here seems like the best solution. Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Arnd Bergmann authored
GCC correctly points out an uninitialized variable use when CONFIG_PCI is disabled. drivers/idle/i7300_idle.c: In function 'i7300_idle_notifier': include/asm-generic/bug.h:119:5: error: 'got_ctl' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (unlikely(__ret_warn_once && !__warned)) { \ ^ drivers/idle/i7300_idle.c:415:5: note: 'got_ctl' was declared here u8 got_ctl; ^~~~~~~ The driver no longer exists in later kernels, so this patch only appplies to linux-4.9.y and earlier. Signed-off-by: -
Arnd Bergmann authored
When CONFIG_MTD_CFI is disabled, we get a warning for this spi driver: include/linux/mtd/cfi.h:76:2: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp] The problem here is a layering violation that was fixed in mainline kernels with a larger rework in commit 054e532f ("spi: bcm-qspi: Remove hardcoded settings and spi-nor.h dependency"). We can't really backport that to stable kernels, so this just adds a Kconfig dependency to make it either build cleanly or force it to be disabled. Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_ELF_CORE is disabled, we get a harmless warning in the compat version of binfmt_elf: fs/compat_binfmt_elf.c:58:13: error: 'cputime_to_compat_timeval' defined but not used [-Werror=unused-function] This was addressed in mainline Linux as part of a larger rework with commit cd19c364 ("fs/binfmt: Convert obsolete cputime type to nsecs"). For 4.9 and earlier, this just shuts up the warning by adding an #ifdef around the function definition. Signed-off-by:
-
