- 05 Oct, 2023 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from Bluetooth, netfilter, BPF and WiFi. I didn't collect precise data but feels like we've got a lot of 6.5 fixes here. WiFi fixes are most user-awaited. Current release - regressions: - Bluetooth: fix hci_link_tx_to RCU lock usage Current release - new code bugs: - bpf: mprog: fix maximum program check on mprog attachment - eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns() Previous releases - regressions: - ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling - vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it doesn't handle zero length like we expected - wifi: - cfg80211: fix cqm_config access race, fix crashes with brcmfmac - iwlwifi: mvm: handle PS changes in vif_cfg_changed - mac80211: fix mesh id corruption on 32 bit systems - mt76: mt76x02: fix MT76x0 external LNA gain handling - Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - l2tp: fix handling of transhdrlen in __ip{,6}_append_data() - dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent - eth: stmmac: fix the incorrect parameter after refactoring Previous releases - always broken: - net: replace calls to sock->ops->connect() with kernel_connect(), prevent address rewrite in kernel_bind(); otherwise BPF hooks may modify arguments, unexpectedly to the caller - tcp: fix delayed ACKs when reads and writes align with MSS - bpf: - verifier: unconditionally reset backtrack_state masks on global func exit - s390: let arch_prepare_bpf_trampoline return program size, fix struct_ops offsets - sockmap: fix accounting of available bytes in presence of PEEKs - sockmap: reject sk_msg egress redirects to non-TCP sockets - ipv4/fib: send netlink notify when delete source address routes - ethtool: plca: fix width of reads when parsing netlink commands - netfilter: nft_payload: rebuild vlan header on h_proto access - Bluetooth: hci_codec: fix leaking memory of local_codecs - eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids - eth: stmmac: - dwmac-stm32: fix resume on STM32 MCU - remove buggy and unneeded stmmac_poll_controller, depend on NAPI - ibmveth: always recompute TCP pseudo-header checksum, fix use of the driver with Open vSwitch - wifi: - rtw88: rtw8723d: fix MAC address offset in EEPROM - mt76: fix lock dependency problem for wed_lock - mwifiex: sanity check data reported by the device - iwlwifi: ensure ack flag is properly cleared - iwlwifi: mvm: fix a memory corruption due to bad pointer arithm - iwlwifi: mvm: fix incorrect usage of scan API Misc: - wifi: mac80211: work around Cisco AP 9115 VHT MPDU length" * tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) MAINTAINERS: update Matthieu's email address mptcp: userspace pm allow creating id 0 subflow mptcp: fix delegated action races net: stmmac: remove unneeded stmmac_poll_controller net: lan743x: also select PHYLIB net: ethernet: mediatek: disable irq before schedule napi net: mana: Fix oversized sge0 for GSO packets net: mana: Fix the tso_bytes calculation net: mana: Fix TX CQE error handling netlink: annotate data-races around sk->sk_err sctp: update hb timer immediately after users change hb_interval sctp: update transport state when processing a dupcook packet tcp: fix delayed ACKs for MSS boundary condition tcp: fix quick-ack counting to count actual ACKs of new data page_pool: fix documentation typos tipc: fix a potential deadlock on &tx->lock net: stmmac: dwmac-stm32: fix resume on STM32 MCU ipv4: Set offload_failed flag in fibmatch results netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs ... -
Linus Torvalds authored
Merge tag 'integrity-v6.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fixes from Mimi Zohar: "Two additional patches to fix the removal of the deprecated IMA_TRUSTED_KEYRING Kconfig" * tag 'integrity-v6.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: rework CONFIG_IMA dependency block ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/ledsLinus Torvalds authored
Pull LED fix from Lee Jones: "Just the one bug-fix: - Fix regression affecting LED_COLOR_ID_MULTI users" * tag 'leds-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD fixes from Lee Jones: "A couple of small fixes: - Potential build failure in CS42L43 - Device Tree bindings clean-up for a superseded patch" * tag 'mfd-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: dt-bindings: mfd: Revert "dt-bindings: mfd: maxim,max77693: Add USB connector" mfd: cs42l43: Fix MFD_CS42L43 dependency on REGMAP_IRQ
-
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfsLinus Torvalds authored
Pull overlayfs fixes from Amir Goldstein: - Fix for file reference leak regression - Fix for NULL pointer deref regression - Fixes for RCU-walk race regressions: Two of the fixes were taken from Al's RCU pathwalk race fixes series with his consent [1]. Note that unlike most of Al's series, these two patches are not about racing with ->kill_sb() and they are also very recent regressions from v6.5, so I think it's worth getting them into v6.5.y. There is also a fix for an RCU pathwalk race with ->kill_sb(), which may have been solved in vfs generic code as you suggested, but it also rids overlayfs from a nasty hack, so I think it's worth anyway. Link: https://lore.kernel.org/linux-fsdevel/20231003204749.GA800259@ZenIV/ [1] * tag 'ovl-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: fix NULL pointer defer when encoding non-decodable lower fid ovl: make use of ->layers safe in rcu pathwalk ovl: fetch inode once in ovl_dentry_revalidate_common() ovl: move freeing ovl_entry past rcu delay ovl: fix file reference leak when submitting aio
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes and maintainer email update for v6.6 Patch 1 addresses a race condition in MPTCP "delegated actions" infrastructure. Affects v5.19 and later. Patch 2 removes an unnecessary restriction that did not allow additional outgoing subflows using the local address of the initial MPTCP subflow. v5.16 and later. Patch 3 updates Matthieu's email address. ==================== Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-0-28de4ac663ae@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
Use my kernel.org account instead. The other one will bounce by the end of the year. Signed-off-by:
Matthieu Baerts <matttbe@kernel.org> Signed-off-by:
Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-3-28de4ac663ae@kernel.orgSigned-off-by:
-
Geliang Tang authored
This patch drops id 0 limitation in mptcp_nl_cmd_sf_create() to allow creating additional subflows with the local addr ID 0. There is no reason not to allow additional subflows from this local address: we should be able to create new subflows from the initial endpoint. This limitation was breaking fullmesh support from userspace. Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/391 Cc: stable@vger.kernel.org Suggested-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
-
Paolo Abeni authored
The delegated action infrastructure is prone to the following race: different CPUs can try to schedule different delegated actions on the same subflow at the same time. Each of them will check different bits via mptcp_subflow_delegate(), and will try to schedule the action on the related per-cpu napi instance. Depending on the timing, both can observe an empty delegated list node, causing the same entry to be added simultaneously on two different lists. The root cause is that the delegated actions infra does not provide a single synchronization point. Address the issue reserving an additional bit to mark the subflow as scheduled for delegation. Acquiring such bit guarantee the caller to own the delegated list node, and being able to safely schedule the subflow. Clear such bit only when the subflow scheduling is completed, ensuring proper barrier in place. Additionally swap the meaning of the delegated_action bitmask, to allow the usage of the existing helper to set multiple bit at once. Fixes: bcd97734 ("mptcp: use delegate action to schedule 3rd ack retrans") Cc: stable@vger.kernel.org Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Remi Pommarel authored
Using netconsole netpoll_poll_dev could be called from interrupt context, thus using disable_irq() would cause the following kernel warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/irq/manage.c:137 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0 CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117 Hardware name: aml (r1) (DT) Call trace: dump_backtrace+0x0/0x270 show_stack+0x14/0x20 dump_stack_lvl+0x8c/0xac dump_stack+0x18/0x30 ___might_sleep+0x150/0x194 __might_sleep+0x64/0xbc synchronize_irq+0x8c/0x150 disable_irq+0x2c/0x40 stmmac_poll_controller+0x140/0x1a0 netpoll_poll_dev+0x6c/0x220 netpoll_send_skb+0x308/0x390 netpoll_send_udp+0x418/0x760 write_msg+0x118/0x140 [netconsole] console_unlock+0x404/0x500 vprintk_emit+0x118/0x250 dev_vprintk_emit+0x19c/0x1cc dev_printk_emit+0x90/0xa8 __dev_printk+0x78/0x9c _dev_warn+0xa4/0xbc ath10k_warn+0xe8/0xf0 [ath10k_core] ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core] ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci] __napi_poll+0x58/0x1f4 net_rx_action+0x504/0x590 _stext+0x1b8/0x418 run_ksoftirqd+0x74/0xa4 smpboot_thread_fn+0x210/0x3c0 kthread+0x1fc/0x210 ret_from_fork+0x10/0x20 Since [0] .ndo_poll_controller is only needed if driver doesn't or partially use NAPI. Because stmmac does so, stmmac_poll_controller can be removed fixing the above warning. [0] commit ac3d9dd0 ("netpoll: make ndo_poll_controller() optional") Cc: <stable@vger.kernel.org> # 5.15.x Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers") Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1c156a6d8c9170bd6a17825f2277115525b4d50f.1696429960.git.repk@triplefau.ltSigned-off-by:
-
Randy Dunlap authored
Since FIXED_PHY depends on PHYLIB, PHYLIB needs to be set to avoid a kconfig warning: WARNING: unmet direct dependencies detected for FIXED_PHY Depends on [n]: NETDEVICES [=y] && PHYLIB [=n] Selected by [y]: - LAN743X [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=y] Fixes: 73c4d1b3 ("net: lan743x: select FIXED_PHY") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202309261802.JPbRHwti-lkp@intel.com Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: UNGLinuxDriver@microchip.com Reviewed-by:
-
Christian Marangi authored
While searching for possible refactor of napi_schedule_prep and __napi_schedule it was notice that the mtk eth driver disable the interrupt for rx and tx AFTER napi is scheduled. While this is a very hard to repro case it might happen to have situation where the interrupt is disabled and never enabled again as the napi completes and the interrupt is enabled before. This is caused by the fact that a napi driven by interrupt expect a logic with: 1. interrupt received. napi prepared -> interrupt disabled -> napi scheduled 2. napi triggered. ring cleared -> interrupt enabled -> wait for new interrupt To prevent this case, disable the interrupt BEFORE the napi is scheduled. Fixes: 656e7052 ("net-next: mediatek: add support for MT7623 ethernet") Cc: stable@vger.kernel.org Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20231002140805.568-1-ansuelsmth@gmail.comSigned-off-by:
-
Paolo Abeni authored
Haiyang Zhang says: ==================== net: mana: Fix some TX processing bugs Fix TX processing bugs on error handling, tso_bytes calculation, and sge0 size. ==================== Link: https://lore.kernel.org/r/1696020147-14989-1-git-send-email-haiyangz@microsoft.comSigned-off-by:
-
Haiyang Zhang authored
Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove the subtraction from header size. Cc: stable@vger.kernel.org Fixes: bd7fc6e1 ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by:
-
Haiyang Zhang authored
For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging. Cc: stable@vger.kernel.org Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linuxLinus Torvalds authored
Pull rtla fixes from Daniel Bristot de Oliveira: "rtla (Real-Time Linux Analysis) tool fixes. Timerlat auto-analysis: - Timerlat is reporting thread interference time without thread noise events occurrence. It was caused because the thread interference variable was not reset after the analysis of a timerlat activation that did not hit the threshold. - The IRQ handler delay is estimated from the delta of the IRQ latency reported by timerlat, and the timestamp from IRQ handler start event. If the delta is near-zero, the drift from the external clock and the trace event and/or the overhead can cause the value to be negative. If the value is negative, print a zero-delay. - IRQ handlers happening after the timerlat thread event but before the stop tracing were being reported as IRQ that happened before the *current* IRQ occurrence. Ignore Previous IRQ noise in this condition because they are valid only for the *next* timerlat activation. Timerlat user-space: - Timerlat is stopping all user-space thread if a CPU becomes offline. Do not stop the entire tool if a CPU is/become offline, but only the thread of the unavailable CPU. Stop the tool only, if all threads leave because the CPUs become/are offline. man-pages: - Fix command line example in timerlat hist man page" * tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux: rtla: fix a example in rtla-timerlat-hist.rst rtla/timerlat: Do not stop user-space if a cpu is offline rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample rtla/timerlat_aa: Fix negative IRQ delay rtla/timerlat_aa: Zero thread sum after every sample analysis -
Eric Dumazet authored
syzbot caught another data-race in netlink when setting sk->sk_err. Annotate all of them for good measure. BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg write to 0xffff8881613bb220 of 4 bytes by task 28147 on cpu 0: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881613bb220 of 4 bytes by task 28146 on cpu 1: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0x00000016 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28146 Comm: syz-executor.0 Not tainted 6.6.0-rc3-syzkaller-00055-g9ed22ae6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
-
Xin Long authored
Currently, when hb_interval is changed by users, it won't take effect until the next expiry of hb timer. As the default value is 30s, users have to wait up to 30s to wait its hb_interval update to work. This becomes pretty bad in containers where a much smaller value is usually set on hb_interval. This patch improves it by resetting the hb timer immediately once the value of hb_interval is updated by users. Note that we don't address the already existing 'problem' when sending a heartbeat 'on demand' if one hb has just been sent(from the timer) mentioned in: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.htmlSigned-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
-
Xin Long authored
During the 4-way handshake, the transport's state is set to ACTIVE in sctp_process_init() when processing INIT_ACK chunk on client or COOKIE_ECHO chunk on server. In the collision scenario below: 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state, sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it creates a new association and sets its transport to ACTIVE then updates to the old association in sctp_assoc_update(). However, in sctp_assoc_update(), it will skip the transport update if it finds a transport with the same ipaddr already existing in the old asoc, and this causes the old asoc's transport state not to move to ACTIVE after the handshake. This means if DATA retransmission happens at this moment, it won't be able to enter PF state because of the check 'transport->state == SCTP_ACTIVE' in sctp_do_8_2_transport_strike(). This patch fixes it by updating the transport in sctp_assoc_update() with sctp_assoc_add_peer() where it updates the transport state if there is already a transport with the same ipaddr exists in the old asoc. Signed-off-by:
-
- 04 Oct, 2023 20 commits
-
-
Neal Cardwell authored
This commit fixes poor delayed ACK behavior that can cause poor TCP latency in a particular boundary condition: when an application makes a TCP socket write that is an exact multiple of the MSS size. The problem is that there is painful boundary discontinuity in the current delayed ACK behavior. With the current delayed ACK behavior, we have: (1) If an app reads data when > 1*MSS is unacknowledged, then tcp_cleanup_rbuf() ACKs immediately because of: tp->rcv_nxt - tp->rcv_wup > icsk->icsk_ack.rcv_mss || (2) If an app reads all received data, and the packets were < 1*MSS, and either (a) the app is not ping-pong or (b) we received two packets < 1*MSS, then tcp_cleanup_rbuf() ACKs immediately beecause of: ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED2) || ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED) && !inet_csk_in_pingpong_mode(sk))) && (3) *However*: if an app reads exactly 1*MSS of data, tcp_cleanup_rbuf() does not send an immediate ACK. This is true even if the app is not ping-pong and the 1*MSS of data had the PSH bit set, suggesting the sending application completed an application write. Thus if the app is not ping-pong, we have this painful case where >1*MSS gets an immediate ACK, and <1*MSS gets an immediate ACK, but a write whose last skb is an exact multiple of 1*MSS can get a 40ms delayed ACK. This means that any app that transfers data in one direction and takes care to align write size or packet size with MSS can suffer this problem. With receive zero copy making 4KB MSS values more common, it is becoming more common to have application writes naturally align with MSS, and more applications are likely to encounter this delayed ACK problem. The fix in this commit is to refine the delayed ACK heuristics with a simple check: immediately ACK a received 1*MSS skb with PSH bit set if the app reads all data. Why? If an skb has a len of exactly 1*MSS and has the PSH bit set then it is likely the end of an application write. So more data may not be arriving soon, and yet the data sender may be waiting for an ACK if cwnd-bound or using TX zero copy. Thus we set ICSK_ACK_PUSHED in this case so that tcp_cleanup_rbuf() will send an ACK immediately if the app reads all of the data and is not ping-pong. Note that this logic is also executed for the case where len > MSS, but in that case this logic does not matter (and does not hurt) because tcp_cleanup_rbuf() will always ACK immediately if the app reads data and there is more than an MSS of unACKed data. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Neal Cardwell <ncardwell@google.com> Reviewed-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
-
Neal Cardwell authored
This commit fixes quick-ack counting so that it only considers that a quick-ack has been provided if we are sending an ACK that newly acknowledges data. The code was erroneously using the number of data segments in outgoing skbs when deciding how many quick-ack credits to remove. This logic does not make sense, and could cause poor performance in request-response workloads, like RPC traffic, where requests or responses can be multi-segment skbs. When a TCP connection decides to send N quick-acks, that is to accelerate the cwnd growth of the congestion control module controlling the remote endpoint of the TCP connection. That quick-ack decision is purely about the incoming data and outgoing ACKs. It has nothing to do with the outgoing data or the size of outgoing data. And in particular, an ACK only serves the intended purpose of allowing the remote congestion control to grow the congestion window quickly if the ACK is ACKing or SACKing new data. The fix is simple: only count packets as serving the goal of the quickack mechanism if they are ACKing/SACKing new data. We can tell whether this is the case by checking inet_csk_ack_scheduled(), since we schedule an ACK exactly when we are ACKing/SACKing new data. Fixes: fc6415bc ("[TCP]: Fix quick-ack decrementing with TSO.") Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Florian Westphal says: ==================== netfilter patches for net First patch resolves a regression with vlan header matching, this was broken since 6.5 release. From myself. Second patch fixes an ancient problem with sctp connection tracking in case INIT_ACK packets are delayed. This comes with a selftest, both patches from Xin Long. Patch 4 extends the existing nftables audit selftest, from Phil Sutter. Patch 5, also from Phil, avoids a situation where nftables would emit an audit record twice. This was broken since 5.13 days. Patch 6, from myself, avoids spurious insertion failure if we encounter an overlapping but expired range during element insertion with the 'nft_set_rbtree' backend. This problem exists since 6.2. * tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs selftests: netfilter: Extend nft_audit.sh selftests: netfilter: test for sctp collision processing in nf_conntrack netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp netfilter: nft_payload: rebuild vlan header on h_proto access ==================== Link: https://lore.kernel.org/r/20231004141405.28749-1-fw@strlen.deSigned-off-by:
-
Randy Dunlap authored
Correct grammar for better readability. Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20231001003846.29541-1-rdunlap@infradead.orgSigned-off-by:
-
Chengfeng Ye authored
It seems that tipc_crypto_key_revoke() could be be invoked by wokequeue tipc_crypto_work_rx() under process context and timer/rx callback under softirq context, thus the lock acquisition on &tx->lock seems better use spin_lock_bh() to prevent possible deadlock. This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. tipc_crypto_work_rx() <workqueue> --> tipc_crypto_key_distr() --> tipc_bcast_xmit() --> tipc_bcbase_xmit() --> tipc_bearer_bc_xmit() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <timer interrupt> --> tipc_disc_timeout() --> tipc_bearer_xmit_skb() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <deadlock here> Signed-off-by:
Chengfeng Ye <dg573847474@gmail.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Link: https://lore.kernel.org/r/20230927181414.59928-1-dg573847474@gmail.comSigned-off-by:
-
Ben Wolsieffer authored
The STM32MP1 keeps clk_rx enabled during suspend, and therefore the driver does not enable the clock in stm32_dwmac_init() if the device was suspended. The problem is that this same code runs on STM32 MCUs, which do disable clk_rx during suspend, causing the clock to never be re-enabled on resume. This patch adds a variant flag to indicate that clk_rx remains enabled during suspend, and uses this to decide whether to enable the clock in stm32_dwmac_init() if the device was suspended. This approach fixes this specific bug with limited opportunity for unintended side-effects, but I have a follow up patch that will refactor the clock configuration and hopefully make it less error prone. Fixes: 6528e02c ("net: ethernet: stmmac: add adaptation for stm32mp157c.") Signed-off-by:
Ben Wolsieffer <ben.wolsieffer@hefring.com> Reviewed-by:
-
Benjamin Poirier authored
Due to a small omission, the offload_failed flag is missing from ipv4 fibmatch results. Make sure it is set correctly. The issue can be witnessed using the following commands: echo "1 1" > /sys/bus/netdevsim/new_device ip link add dummy1 up type dummy ip route add 192.0.2.0/24 dev dummy1 echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload ip route add 198.51.100.0/24 dev dummy1 ip route # 192.168.15.0/24 has rt_trap # 198.51.100.0/24 has rt_offload_failed ip route get 192.168.15.1 fibmatch # Result has rt_trap ip route get 198.51.100.1 fibmatch # Result differs from the route shown by `ip route`, it is missing # rt_offload_failed ip link del dev dummy1 echo 1 > /sys/bus/netdevsim/del_device Fixes: 36c5100e ("IPv4: Add "offload failed" indication to routes") Signed-off-by:
Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.comSigned-off-by:
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "One single fix to Makefile to fix the incorrect TARGET name for uevent test" * tag 'linux-kselftest-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Fix wrong TARGET in kselftest top level Makefile
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Quite a collection of fixes this time, really too many to list individually. Many stack fixes, even rfkill (found by simulation and the new eevdf scheduler)! Also a bigger maintainers file cleanup, to remove old and redundant information. * tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits) wifi: iwlwifi: mvm: Fix incorrect usage of scan API wifi: mac80211: Create resources for disabled links wifi: cfg80211: avoid leaking stack data into trace wifi: mac80211: allow transmitting EAPOL frames with tainted key wifi: mac80211: work around Cisco AP 9115 VHT MPDU length wifi: cfg80211: Fix 6GHz scan configuration wifi: mac80211: fix potential key leak wifi: mac80211: fix potential key use-after-free wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling wifi: brcmfmac: Replace 1-element arrays with flexible arrays wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM rfkill: sync before userspace visibility/changes wifi: mac80211: fix mesh id corruption on 32 bit systems wifi: cfg80211: add missing kernel-doc for cqm_rssi_work wifi: cfg80211: fix cqm_config access race wifi: iwlwifi: mvm: Fix a memory corruption issue wifi: iwlwifi: Ensure ack flag is properly cleared. wifi: iwlwifi: dbg_ini: fix structure packing iwlwifi: mvm: handle PS changes in vif_cfg_changed ... ==================== Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.netSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-10-02 We've added 11 non-merge commits during the last 12 day(s) which contain a total of 12 files changed, 176 insertions(+), 41 deletions(-). The main changes are: 1) Fix BPF verifier to reset backtrack_state masks on global function exit as otherwise subsequent precision tracking would reuse them, from Andrii Nakryiko. 2) Several sockmap fixes for available bytes accounting, from John Fastabend. 3) Reject sk_msg egress redirects to non-TCP sockets given this is only supported for TCP sockets today, from Jakub Sitnicki. 4) Fix a syzkaller splat in bpf_mprog when hitting maximum program limits with BPF_F_BEFORE directive, from Daniel Borkmann and Nikolay Aleksandrov. 5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust size_index for selecting a bpf_mem_cache, from Hou Tao. 6) Fix arch_prepare_bpf_trampoline return code for s390 JIT, from Song Liu. 7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off, from Leon Hwang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Use kmalloc_size_roundup() to adjust size_index selftest/bpf: Add various selftests for program limits bpf, mprog: Fix maximum program check on mprog attachment bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets bpf, sockmap: Add tests for MSG_F_PEEK bpf, sockmap: Do not inc copied_seq when PEEK flag set bpf: tcp_read_skb needs to pop skb regardless of seq bpf: unconditionally reset backtrack_state masks on global func exit bpf: Fix tr dereferencing selftests/bpf: Check bpf_cubic_acked() is called via struct_ops s390/bpf: Let arch_prepare_bpf_trampoline return program size ==================== Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.netSigned-off-by:
-
Florian Westphal authored
nft_rbtree_gc_elem() walks back and removes the end interval element that comes before the expired element. There is a small chance that we've cached this element as 'rbe_ge'. If this happens, we hold and test a pointer that has been queued for freeing. It also causes spurious insertion failures: $ cat test-testcases-sets-0044interval_overlap_0.1/testout.log Error: Could not process rule: File exists add element t s { 0 - 2 } ^^^^^^ Failed to insert 0 - 2 given: table ip t { set s { type inet_service flags interval,timeout timeout 2s gc-interval 2s } } The set (rbtree) is empty. The 'failure' doesn't happen on next attempt. Reason is that when we try to insert, the tree may hold an expired element that collides with the range we're adding. While we do evict/erase this element, we can trip over this check: if (rbe_ge && nft_rbtree_interval_end(rbe_ge) && nft_rbtree_interval_end(new)) return -ENOTEMPTY; rbe_ge was erased by the synchronous gc, we should not have done this check. Next attempt won't find it, so retry results in successful insertion. Restart in-kernel to avoid such spurious errors. Such restart are rare, unless userspace intentionally adds very large numbers of elements with very short timeouts while setting a huge gc interval. Even in this case, this cannot loop forever, on each retry an existing element has been removed. As the caller is holding the transaction mutex, its impossible for a second entity to add more expiring elements to the tree. After this it also becomes feasible to remove the async gc worker and perform all garbage collection from the commit path. Fixes: c9e6978e ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by:Florian Westphal <fw@strlen.de>
-
Phil Sutter authored
When adding/updating an object, the transaction handler emits suitable audit log entries already, the one in nft_obj_notify() is redundant. To fix that (and retain the audit logging from objects' 'update' callback), Introduce an "audit log free" variant for internal use. Fixes: c520292f ("audit: log nftables configuration change events once per table") Signed-off-by:
Phil Sutter <phil@nwl.cc> Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> (Audit) Signed-off-by:
-
Phil Sutter authored
Add tests for sets and elements and deletion of all kinds. Also reorder rule reset tests: By moving the bulk rule add command up, the two 'reset rules' tests become identical. While at it, fix for a failing bulk rule add test's error status getting lost due to its use in a pipe. Avoid this by using a temporary file. Headings in diff output for failing tests contain no useful data, strip them. Signed-off-by:
-
Xin Long authored
This patch adds a test case to reproduce the SCTP DATA chunk retransmission timeout issue caused by the improper SCTP collision processing in netfilter nf_conntrack_proto_sctp. In this test, client sends a INIT chunk, but the INIT_ACK replied from server is delayed until the server sends a INIT chunk to start a new connection from its side. After the connection is complete from server side, the delayed INIT_ACK arrives in nf_conntrack_proto_sctp. The delayed INIT_ACK should be dropped in nf_conntrack_proto_sctp instead of updating the vtag with the out-of-date init_tag, otherwise, the vtag in DATA chunks later sent by client don't match the vtag in the conntrack entry and the DATA chunks get dropped. Signed-off-by:
-
Xin Long authored
In Scenario A and B below, as the delayed INIT_ACK always changes the peer vtag, SCTP ct with the incorrect vtag may cause packet loss. Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK 192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151] 192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] * 192.168.1.2 > 192.168.1.1: [COOKIE ECHO] 192.168.1.1 > 192.168.1.2: [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: [COOKIE ACK] Scenario B: INIT_ACK is delayed until the peer completes its own handshake 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] * This patch fixes it as below: In SCTP_CID_INIT processing: - clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir]. (Scenario E) - set ct->proto.sctp.init[dir]. In SCTP_CID_INIT_ACK processing: - drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C) - drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A) In SCTP_CID_COOKIE_ACK processing: - clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir]. (Scenario D) Also, it's important to allow the ct state to move forward with cookie_echo and cookie_ack from the opposite dir for the collision scenarios. There are also other Scenarios where it should allow the packet through, addressed by the processing above: Scenario C: new CT is created by INIT_ACK. Scenario D: start INIT on the existing ESTABLISHED ct. Scenario E: start INIT after the old collision on the existing ESTABLISHED ct. 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] (both side are stopped, then start new connection again in hours) 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742] Fixes: 9fb9cbb1 ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: -
Florian Westphal authored
nft can perform merging of adjacent payload requests. This means that: ether saddr 00:11 ... ether type 8021ad ... is a single payload expression, for 8 bytes, starting at the ethernet source offset. Check that offset+length is fully within the source/destination mac addersses. This bug prevents 'ether type' from matching the correct h_proto in case vlan tag got stripped. Fixes: de6843be ("netfilter: nft_payload: rebuild vlan header when needed") Reported-by:
David Ward <david.ward@ll.mit.edu> Signed-off-by:
-
David Wilder authored
In some OVS environments the TCP pseudo header checksum may need to be recomputed. Currently this is only done when the interface instance is configured for "Trunk Mode". We found the issue also occurs in some Kubernetes environments, these environments do not use "Trunk Mode", therefor the condition is removed. Performance tests with this change show only a fractional decrease in throughput (< 0.2%). Fixes: 7525de25 ("ibmveth: Set CHECKSUM_PARTIAL if NULL TCP CSUM.") Signed-off-by:
David Wilder <dwilder@us.ibm.com> Reviewed-by:
Nick Child <nnac123@linux.ibm.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The k3_udma_glue_tx_get_irq() function currently returns negative error codes on error, zero on error and positive values for success. This complicates life for the callers who need to propagate the error code. Also GCC will not warn about unsigned comparisons when you check: if (unsigned_irq <= 0) All the callers have been fixed now but let's just make this easy going forward. Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Acked-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Dan Carpenter authored
The "tx_chn->irq" variable is unsigned so the error checking does not work correctly. Fixes: 128d5874 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by:
-
Dan Carpenter authored
This accidentally returns success, but it should return a negative error code. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
-
