- 02 Oct, 2018 40 commits
-
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 8d5a803c upstream. With commit 044e6e3d: "ext4: don't update checksum of new initialized bitmaps" the buffer valid bit will get set without actually setting up the checksum for the allocation bitmap, since the checksum will get calculated once we actually allocate an inode or block. If we are doing this, then we need to (re-)check the verified bit after we take the block group lock. Otherwise, we could race with another process reading and verifying the bitmap, which would then complain about the checksum being invalid. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 362eca70 upstream. The inline data code was updating the raw inode directly; this is problematic since if metadata checksums are enabled, ext4_mark_inode_dirty() must be called to update the inode's checksum. In addition, the jbd2 layer requires that get_write_access() be called before the metadata buffer is modified. Fix both of these problems. https://bugzilla.kernel.org/show_bug.cgi?id=200443Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 01cfb793 upstream. Anatoly Trosinenko reports that a corrupted squashfs image can cause a kernel oops. It turns out that squashfs can end up being confused about negative fragment lengths. The regular squashfs_read_data() does check for negative lengths, but squashfs_read_metadata() did not, and the fragment size code just blindly trusted the on-disk value. Fix both the fragment parsing and the metadata reading code. Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 81e69df3 upstream. Fedora has integrated the jitter entropy daemon to work around slow boot problems, especially on VM's that don't support virtio-rng: https://bugzilla.redhat.com/show_bug.cgi?id=1572944 It's understandable why they did this, but the Jitter entropy daemon works fundamentally on the principle: "the CPU microarchitecture is **so** complicated and we can't figure it out, so it *must* be random". Yes, it uses statistical tests to "prove" it is secure, but AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with flying colors. So if RDRAND is available, mix it into entropy submitted from userspace. It can't hurt, and if you believe the NSA has backdoored RDRAND, then they probably have enough details about the Intel microarchitecture that they can reverse engineer how the Jitter entropy daemon affects the microarchitecture, and attack its output stream. And if RDRAND is in fact an honest DRNG, it will immeasurably improve on what the Jitter entropy daemon might produce. This also provides some protection against someone who is able to read or set the entropy seed file. Signed-off-by:
-
José Roberto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 4f212e40 ] To comply with eDP1.4a this bit should be set when enabling PSR2. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 90db5c82 ] The annotations there are wrong as warned: drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: warning: incorrect type in assignment (different base types) drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: expected unsigned short [unsigned] [short] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: got restricted __be16 [usertype] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Shivasharan S authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 3239b8cd ] Hardware could time out Fastpath IOs one second earlier than the timeout provided by the host. For non-RAID devices, driver provides timeout value based on OS provided timeout value. Under certain scenarios, if the OS provides a timeout value of 1 second, due to above behavior hardware will timeout immediately. Increase timeout value for non-RAID fastpath IOs by 1 second. Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Xose Vazquez Perez authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 37b37d26 ] SGI/TP9100 is not an RDAC array: ^^^ https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=blob;f=libmultipath/hwtable.c;h=88b4700beb1d8940008020fbe4c3cd97d62f4a56;hb=HEAD#l235 This partially reverts commit 35204772 ("[SCSI] scsi_dh_rdac : Consolidate rdac strings together") [mkp: fixed up the new entries to align with rest of struct] Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: DM ML <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
-
Suman Anna authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit b7e1e685 ] The OMAP3 ISP driver manages its MMU mappings through the IOMMU-aware ARM DMA backend. The current code creates a dma_iommu_mapping and attaches this to the ISP device, but never detaches the mapping in either the probe failure paths or the driver remove path resulting in an unbalanced mapping refcount and a memory leak. Fix this properly. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Suman Anna <s-anna@ti.com> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit ad2fdcdf ] In crypto_authenc_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tudor-Dan Ambarus authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 31545df3 ] In crypto_authenc_esn_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
-
Dominik Bozek authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 5d111f51 ] wait_for_connected() wait till a port change status to USB_PORT_STAT_CONNECTION, but this is not possible if the port is unpowered. The loop will only exit at timeout. Such case take place if an over-current incident happen while system is in S3. Then during resume wait_for_connected() will wait 2s, which may be noticeable by the user. Signed-off-by:
Dominik Bozek <dominikx.bozek@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by:
-
Michal Simek authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit ece97f3a ] simpleImage generation was broken for some time. This patch is fixing steps how simpleImage.*.ub file is generated. Steps are objdump of vmlinux and create .ub. Also make sure that there is striped elf version with .strip suffix. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Ondrej Mosnáček authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 23bcc480 ] Current implementation of auditing by executable name only implements the 'equal' operator. This patch extends it to also support the 'not equal' operator. See: https://github.com/linux-audit/audit-kernel/issues/53Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Siva Rebbagondla authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 78e45071 ] While performing cleanup, driver is messing with card->ocr value by not masking rocr against ocr_avail. Below panic is observed with some of the SDIO host controllers due to this. Issue is resolved by reverting incorrect modifications to vdd. [ 927.423821] mmc1: Invalid vdd 0x1f [ 927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic [ 927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000-caracalla #1 [ 927.424075] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018 [ 927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci] [ 927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS: 00010282 [ 927.424107] Call Trace: [ 927.424118] sdhci_set_power+0x5a/0x60 [sdhci] [ 927.424125] sdhci_set_ios+0x360/0x3b0 [sdhci] [ 927.424133] mmc_set_initial_state+0x92/0x120 [ 927.424137] mmc_power_up.part.34+0x33/0x1d0 [ 927.424141] mmc_power_up+0x17/0x20 [ 927.424147] mmc_sdio_runtime_resume+0x2d/0x50 [ 927.424151] mmc_runtime_resume+0x17/0x20 [ 927.424156] __rpm_callback+0xc4/0x200 [ 927.424161] ? idr_alloc_cyclic+0x57/0xd0 [ 927.424165] ? mmc_runtime_suspend+0x20/0x20 [ 927.424169] rpm_callback+0x24/0x80 [ 927.424172] ? mmc_runtime_suspend+0x20/0x20 [ 927.424176] rpm_resume+0x4b3/0x6c0 [ 927.424181] __pm_runtime_resume+0x4e/0x80 [ 927.424188] driver_probe_device+0x41/0x490 [ 927.424192] __driver_attach+0xdf/0xf0 [ 927.424196] ? driver_probe_device+0x490/0x490 [ 927.424201] bus_for_each_dev+0x6c/0xc0 [ 927.424205] driver_attach+0x1e/0x20 [ 927.424209] bus_add_driver+0x1f4/0x270 [ 927.424217] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424221] driver_register+0x60/0xe0 [ 927.424227] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424231] sdio_register_driver+0x20/0x30 [ 927.424237] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Chris Novakovic authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 300eec7c ] ic_nameservers, which stores the list of name servers discovered by ipconfig, is initialised (i.e. has all of its elements set to NONE, or 0xffffffff) by ic_nameservers_predef() in the following scenarios: - before the "ip=" and "nfsaddrs=" kernel command line parameters are parsed (in ip_auto_config_setup()); - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in order to clear any values that may have been set after parsing "ip=" or "nfsaddrs=" and are no longer needed. This means that ic_nameservers_predef() is not called when neither "ip=" nor "nfsaddrs=" is specified on the kernel command line. In this scenario, every element in ic_nameservers remains set to 0x00000000, which is indistinguishable from ANY and causes pnp_seq_show() to write the following (bogus) information to /proc/net/pnp: #MANUAL nameserver 0.0.0.0 nameserver 0.0.0.0 nameserver 0.0.0.0 This is potentially problematic for systems that blindly link /etc/resolv.conf to /proc/net/pnp. Ensure that ic_nameservers is also initialised when neither "ip=" nor "nfsaddrs=" are specified by calling ic_nameservers_predef() in ip_auto_config(), but only when ip_auto_config_setup() was not called earlier. This causes the following to be written to /proc/net/pnp, and is consistent with what gets written when ipconfig is configured manually but no name servers are specified on the kernel command line: #MANUAL Signed-off-by:
Chris Novakovic <chris@chrisn.me.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luc Van Oostenryck authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 2ea00909 ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it. Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid(). Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.comSigned-off-by:
-
Dmitry Osipenko authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 1c74d5c0 ] Currently we are enabling handling of interrupts specific to Tegra124+ which happen to overlap with previous generations. Let's specify interrupts mask per SoC generation for consistency and in a preparation of squashing of Tegra20 driver into the common one that will enable handling of GART faults which may be undesirable by newer generations. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dmitry Osipenko authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit bf3fbdfb ] The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the mask to the interrupt status and don't handle interrupts that MC driver haven't asked for. Kernel would disable spurious MC IRQ and report the error. This would happen only in a case of a very severe bug. Signed-off-by:
-
Takashi Sakamoto authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 8e142e9e ] DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but tlv.h is not included. This causes build failure when local macro is defined by comment-out. This commit fixes the bug. At the same time, the alias macro is replaced with a destination macro added at a commit 46e860f7 ("ALSA: rename TLV-related macros so that they're friendly to user applications") Reported-by:
Connor McAdams <conmanx360@gmail.com> Fixes: 44f0c978 ('ALSA: hda/ca0132: Add tuning controls') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Satendra Singh Thakur authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit fc2a69f3 ] In the func drm_atomic_set_crtc_for_plane, with the current code, if crtc of the plane_state and crtc passed as argument to the func are same, entire func will executed in vein. It will get state of crtc and clear and set the bits in plane_mask. All these steps are not required for same old crtc. Ideally, we should do nothing in this case, this patch handles the same, and causes the program to return without doing anything in such scenario. Signed-off-by:
Satendra Singh Thakur <satendra.t@samsung.com> Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit e1b7f11b ] Those are all false-positives that appear with smatch when building for arm: drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 Get rid of them by adding explicit forced casts. Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit ab7f5bf0 ] Comments in the verifier refer to free_bpf_prog_info() which seems to have never existed in tree. Replace it with free_used_maps(). Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 8bfc218d ] Add missing clearing of the previous value when setting rising temperature threshold. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 27e833da ] If we had more than 32 megaraid cards then it would cause memory corruption. That's not likely, of course, but it's handy to enforce it and make the static checker happy. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 9899e4d3 ] In tw_chrdev_ioctl(), the length of the data buffer is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'data_buffer_length'. Then a security check is performed on it to make sure that the length is not more than 'TW_MAX_IOCTL_SECTORS * 512'. Otherwise, an error code -EINVAL is returned. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer length between the two copies. This way, the user can bypass the security check and inject invalid data buffer length. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in tw_chrdev_open() to avoid the above issues. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit c9318a3e ] In twa_chrdev_ioctl(), the ioctl driver command is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'driver_command'. Then a security check is performed on the data buffer size indicated by 'driver_command', which is 'driver_command.buffer_length'. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer size between the two copies. This way, the user can bypass the security check and inject invalid data buffer size. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in twa_chrdev_open()t o avoid the above issues. Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 3c0a83b1 ] The s390 CPU measurement facility sampling mode supports basic entries and diagnostic entries. Each entry has a valid bit to indicate the status of the entry as valid or invalid. This bit is bit 31 in the diagnostic entry, but the bit mask definition refers to bit 30. Fix this by making the reserved field one bit larger. Fixes: 7e75fc3f ("s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function") Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 77715b7d ] The CPU Measurement sampling facility creates a trailer entry for each Sample-Data-Block of stored samples. The trailer entry contains the sizes (in bytes) of the stored sampling types: - basic-sampling data entry size - diagnostic-sampling data entry size Both sizes are 2 bytes long. This patch changes the trailer entry definition to reflect this. Fixes: fcc77f50 ("s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks") Signed-off-by:
-
Sean Lanigan authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 9c4a121e ] Add support for the BCM43364 chipset via an SDIO interface, as used in e.g. the Murata 1FX module. The BCM43364 uses the same firmware as the BCM43430 (which is already included), the only difference is the omission of Bluetooth. However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place triggers the brcmfmac driver to load, and then correctly use the firmware file 'brcmfmac43430-sdio.bin'. Signed-off-by:
Sean Lanigan <sean@lano.id.au> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Jane Wan authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit a75bbe71 ] Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page read is not valid, the host should read redundant parameter page copies. Fix FSL NAND driver to read the two redundant copies which are mandatory in the specification. Signed-off-by:
Jane Wan <Jane.Wan@nokia.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Brad Love authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 0cc4655c ] This issue was reported by a user who downloaded a corrupt saa7164 firmware, then went looking for a valid xc5000 firmware to fix the error displayed...but the device in question has no xc5000, thus after much effort, the wild goose chase eventually led to a support call. The xc5000 has nothing to do with saa7164 (as far as I can tell), so replace the string with saa7164 as well as give a meaningful hint on the firmware mismatch. Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Damien Le Moal authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 804689ad ] For failed commands with valid sense data (e.g. NCQ commands), scsi_check_sense() is used in ata_analyze_tf() to determine if the command can be retried. In such case, rely on this decision and ignore the command error mask based decision done in ata_worth_retry(). This fixes useless retries of commands such as unaligned writes on zoned disks (TYPE_ZAC). Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Wei Yongjun authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 43d0d3c5 ] Add the missing clk_disable_unprepare() before return from jpu_open() in the software reset error handling case. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Marc Zyngier authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 8a22a3e1 ] Inclusion of include/dma-iommu.h when CONFIG_IOMMU_DMA is not selected results in the following splat: In file included from drivers/irqchip/irq-gic-v3-mbi.c:20:0: ./include/linux/dma-iommu.h:95:69: error: unknown type name ‘dma_addr_t’ static inline int iommu_get_msi_cookie(struct iommu_domain *domain, dma_addr_t base) ^~~~~~~~~~ ./include/linux/dma-iommu.h:108:74: warning: ‘struct list_head’ declared inside parameter list will not be visible outside of this definition or declaration static inline void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list) ^~~~~~~~~ scripts/Makefile.build:312: recipe for target 'drivers/irqchip/irq-gic-v3-mbi.o' failed Fix it by including linux/types.h. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20180508121438.11301-5-marc.zyngier@arm.comSigned-off-by:
-
DaeRyong Jeong authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit b6da31b2 ] Unlike normal serials, in pty layer, there is no guarantee that multiple threads don't insert input characters at the same time. If it is happened, tty_insert_flip_string_fixed_flag can be executed concurrently. This can lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag. Call sequences are as follows. CPU0 CPU1 n_tty_ioctl_helper n_tty_ioctl_helper __start_tty tty_send_xchar tty_wakeup pty_write n_hdlc_tty_wakeup tty_insert_flip_string n_hdlc_send_frames tty_insert_flip_string_fixed_flag pty_write tty_insert_flip_string tty_insert_flip_string_fixed_flag To fix the race, acquire port->lock in pty_write() before it inserts input characters to tty buffer. It prevents multiple threads from inserting input characters concurrently. The crash log is as follows: BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/ 0x130 drivers/tty/tty_buffer.c:316 at addr ffff880114fcc121 Write of size 1792 by task syz-executor0/30017 CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140 ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0 ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xb3/0x110 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 print_address_description mm/kasan/report.c:194 [inline] kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283 kasan_report+0x36/0x40 mm/kasan/report.c:303 check_memory_region_inline mm/kasan/kasan.c:292 [inline] check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299 memcpy+0x37/0x50 mm/kasan/kasan.c:335 tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316 tty_insert_flip_string include/linux/tty_flip.h:35 [inline] pty_write+0x7f/0xc0 drivers/tty/pty.c:115 n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419 n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496 tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601 __start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018 __start_tty+0x34/0x40 drivers/tty/tty_io.c:1013 n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138 n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794 tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679 SYSC_ioctl fs/ioctl.c:694 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 entry_SYSCALL_64_fastpath+0x1f/0xbd Signed-off-by:
DaeRyong Jeong <threeearcat@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit b3a81b6c ] On many Chromebooks touch devices are multi-sourced; the components are electrically compatible and one can be freely swapped for another without changing the OS image or firmware. To avoid bunch of scary messages when device is not actually present in the system let's try testing basic communication with it and if there is no response terminate probe early with -ENXIO. Signed-off-by:
Dmitry Torokhov <dtor@chromium.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jonathan Neuschäfer authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 9dcb3df4 ] The interrupt controller inside the Wii's Hollywood chip is connected to two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with their own interrupt status and mask registers. When booting the Wii with mini[1], interrupts from the SD card controller (IRQ 7) are handled by the ARM, because mini provides SD access over IPC. Linux however can't currently use or disable this IPC service, so both sides try to handle IRQ 7 without coordination. Let's instead make sure that all interrupts that are unmasked on the PPC side are masked on the ARM side; this will also make sure that Linux can properly talk to the SD card controller (and potentially other devices). If access to a device through IPC is desired in the future, interrupts from that device should not be handled by Linux directly. [1]: https://github.com/lewurm/miniSigned-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Luc Van Oostenryck authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 7a47f20e ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Terry Junge authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 37e376df ] Add a mapping for Push-To-Talk joystick trigger button. Tested on ChromeBox/ChromeBook with various Plantronics devices. Signed-off-by:
Terry Junge <terry.junge@plantronics.com> Signed-off-by:
-
