- 16 Jan, 2019 16 commits
-
-
Dmitry Osipenko authored
Make all messages to start with a lower case and don't unnecessarily go over 80 chars in the code. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
Memory Controller driver never shared IRQ with any other driver and very unlikely that it will. Hence there is no need to request IRQ sharing and the corresponding flag can be dropped safely. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
Tegra20 doesn't have SMMU. Move out checking of the SMMU presence from the SMMU driver into the Memory Controller driver. This change makes code consistent in regards to how GART/SMMU presence checking is performed. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
The device-tree binding has been changed. There is no separate GART device anymore, it is squashed into the Memory Controller. Integrate GART module with the MC in a way it is done for the SMMU on Tegra30+. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
There is no need for inserting of memory barriers to access registers of Memory Controller. Hence use the relaxed versions of the accessors. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
There is no need to match device with the DT node since it was already matched, use of_device_get_match_data() helper to get the match-data. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
With the device tree binding changes, now Memory Controller has access to GART registers. Hence it is now possible to read client ID on GART page fault to get information about what memory client causes the fault. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
The tegra20-mc device-tree binding has been changed, GART has been squashed into Memory Controller and now the clock property is mandatory for Tegra20, the DT compatible has been changed as well. Adapt driver to the DT changes. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
This fixes irrelevant "tegra-mc 7000f000.memory-controller: no memory timings for RAM code 0 registered" warning message during of kernels boot-up on Tegra20. Fixes: a8d502fd ("memory: tegra: Squash tegra20-mc into common tegra-mc driver") Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
Device tree binding of Memory Controller has been changed: GART has been squashed into the MC, there are a new mandatory clock and #iommu-cells properties, the compatible has been changed to 'tegra20-mc-gart'. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
Splitting GART and Memory Controller wasn't a good decision that was made back in the day. Given that the GART driver wasn't ever been used by anything in the kernel, we decided that it will be better to correct the mistakes of the past and merge two bindings into a single one. As a result there is a DT ABI change for the Memory Controller that allows not to break newer kernels using older DT and not to break older kernels using newer DT, that is done by changing the 'compatible' of the node to 'tegra20-mc-gart' and adding a new-required clock property. The new clock property also puts the tegra20-mc binding in line with the bindings of the later Tegra generations. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
Currently GART writes one page entry at a time. More optimal would be to aggregate the writes and flush BUS buffer in the end, this gives map/unmap 10-40% performance boost (depending on size of mapping) in comparison to flushing after each page entry update. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
Introduce iotlb_sync_map() callback that is invoked in the end of iommu_map(). This new callback allows IOMMU drivers to avoid syncing after mapping of each contiguous chunk and sync only when the whole mapping is completed, optimizing performance of the mapping operation. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
GART can't handle all devices, hence ignore devices that aren't related to GART. IOMMU phandle must be explicitly assign to devices in the device tree. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
Properly clean up allocated resources on the drivers probe failure and remove unneeded checks. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Dmitry Osipenko authored
Remove unneeded headers inclusion and sort the headers in alphabet order. Remove pr_fmt macro since there is no pr_*() in the code and it doesn't affect dev_*() functions. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
- 13 Jan, 2019 17 commits
-
-
Linus Torvalds authored
-
Jonathan Neuschäfer authored
UNAME26 is a mechanism to report Linux's version as 2.6.x, for compatibility with old/broken software. Due to the way it is implemented, it would have to be updated after 5.0, to keep the resulting versions unique. Linus Torvalds argued: "Do we actually need this? I'd rather let it bitrot, and just let it return random versions. It will just start again at 2.4.60, won't it? Anybody who uses UNAME26 for a 5.x kernel might as well think it's still 4.x. The user space is so old that it can't possibly care about differences between 4.x and 5.x, can it? The only thing that matters is that it shows "2.4.<largeenough>", which it will do regardless" Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A bigger batch than I anticipated this week, for two reasons: - Some fallout on Davinci from board file -> DTB conversion, that also includes a few longer-standing fixes (i.e. not recent regressions). - drivers/reset material that has been in linux-next for a while, but didn't get sent to us until now for a variety of reasons (maintainer out sick, holidays, etc). There's a functional dependency in there such that one platform (Altera's SoCFPGA) won't boot without one of the patches; instead of reverting the patch that got merged, I looked at this set and decided it was small enough that I'll pick it up anyway. If you disagree I can revisit with a smaller set. That being said, there's also a handful of the usual stuff: - Fix for a crash on Armada 7K/8K when the kernel touches PSCI-reserved memory - Fix for PCIe reset on Macchiatobin (Armada 8K development board, what this email is sent from in fact :) - Enable a few new-merged modules for Amlogic in arm64 defconfig - Error path fixes on Integrator - Build fix for Renesas and Qualcomm - Initialization fix for Renesas RZ/G2E .. plus a few more fixlets" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: integrator: impd1: use struct_size() in devm_kzalloc() qcom-scm: Include <linux/err.h> header gpio: pl061: handle failed allocations ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area ARM: dts: da850-lcdk: Correct the sound card name ARM: dts: da850-lcdk: Correct the audio codec regulators ARM: dts: da850-evm: Correct the sound card name ARM: dts: da850-evm: Correct the audio codec regulators ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries ARM: davinci: dm355-evm: fix label names in GPIO lookup entries ARM: davinci: da850-evm: fix label names in GPIO lookup entries ARM: davinci: da830-evm: fix label names in GPIO lookup entries arm64: defconfig: enable modules for amlogic s400 sound card reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - two regression fixes in clone/dedupe ioctls, the generic check callback needs to lock extents properly and wait for io to avoid problems with writeback and relocation - fix deadlock when using free space tree due to block group creation - a recently added check refuses a valid fileystem with seeding device, make that work again with a quickfix, proper solution needs more intrusive changes * tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Use real device structure to verify dev extent Btrfs: fix deadlock when using free space tree due to block group creation Btrfs: fix race between reflink/dedupe and relocation Btrfs: fix race between cloning range ending at eof and writeback
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here is one small sysfs change, and a documentation update for 5.0-rc2 The sysfs change moves from using BUG_ON to WARN_ON, as discussed in an email thread on lkml while trying to track down another driver bug. sysfs should not be crashing and preventing people from seeing where they went wrong. Now it properly recovers and warns the developer. The documentation update removes the use of BUS_ATTR() as the kernel is moving away from this to use the specific BUS_ATTR_RW() and friends instead. There are pending patches in all of the different subsystems to remove the last users of this macro, but for now, don't advertise it should be used anymore to keep new ones from being introduced. Both have been in linux-next with no reported issues" * tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: driver core: remove use of BUS_ATTR sysfs: convert BUG_ON to WARN_ON
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for some reported issues. One reverts a patch that was made to the rtl8723bs driver that turned out to not be needed at all as it was a bug in clang. The others fix up some reported issues in the rtl8188eu driver and update the MAINTAINERS file to point to Larry for this driver so he can get the bug reports easier. All have been in linux-next with no reported issues" * tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "staging: rtl8723bs: Mark ACPI table declaration as used" staging: rtl8188eu: Fix module loading from tasklet for WEP encryption staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption MAINTAINERS: Add entry for staging driver r8188eu
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported issues. The first is a simple serial driver fix for a regression that showed up in 5.0-rc1. The second one resolves a number of reported issues with the recent tty locking fixes that went into 5.0-rc1. Lots of people have tested the second one and say it resolves their issues. Both have been in linux-next with no reported issues" * tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Don't hold ldisc lock in tty_reopen() if ldisc present serial: lantiq: Do not swap register read/writes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB driver fixes and quirk updates for 5.0-rc2. The majority here are some quirks for some storage devices to get them to work properly. There's also a fix here to resolve the reported issues with some audio devices that say they are UAC3 compliant, but really are not. And a fix up for the MAINTAINERS file to remove a dead url. All have been in linux-next with no reported issues" * tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: storage: Remove outdated URL from MAINTAINERS USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB usbcore: Select only first configuration for non-UAC3 compliant devices USB: storage: add quirk for SMI SM3350 USB: storage: don't insert sane sense for SPC3+ when bad sense specified usb: cdc-acm: send ZLP for Telit 3G Intel based modems
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches fix an important set of crediting (flow control) problems, and also two problems in cifs_writepages, ddressing some large i/o and also compounding issues" * tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number CIFS: Fix error paths in writeback code CIFS: Move credit processing to mid callbacks for SMB3 CIFS: Fix credits calculation for cancelled requests cifs: Fix potential OOB access of lock element array cifs: Limit memory used by lock request calls to a page cifs: move large array from stack to heap CIFS: Do not hide EINTR after sending network packets CIFS: Fix credit computation for compounded requests CIFS: Do not set credits to 1 if the server didn't grant anything CIFS: Fix adjustment of credits for MTU requests cifs: Fix a tiny potential memory leak cifs: Fix a debug message
-
git://git.pengutronix.de/git/pza/linuxOlof Johansson authored
Late reset controller changes for v5.0 This adds missing deassert functionality to the ARC HSDK reset driver, fixes some indentation and grammar issues in the kernel docs, adds a helper to count the number of resets on a device for the non-DT case as well, adds an early reset driver for SoCFPGA and simple reset driver support for Stratix10, and generalizes the uniphier USB3 glue layer reset to also cover AHCI. * tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux: reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding reset: socfpga: add an early reset driver for SoCFPGA reset: fix null pointer dereference on dev by dev_name reset: Add reset_control_get_count() reset: Improve reset controller kernel docs ARC: HSDK: improve reset driver Signed-off-by:
Olof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu fixes for 5.0 They are all device tree fixes which also worth being in stable: - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing this area and crashing while doing it. - Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based) - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based) * tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes Fixes for the Integrator: - Handle failed allocations in the IM/PC bus attachment. - Use struct_size() for allocation. * tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: integrator: impd1: use struct_size() in devm_kzalloc() gpio: pl061: handle failed allocations Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic DT fixes for v5.0-rc - arm64: defconfig: enable modules for amlogic s400 sound card * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: defconfig: enable modules for amlogic s400 sound card Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Qualcomm Driver Fixes for 5.0-rc1 * Add required includes into qcom_scm.h * tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: qcom-scm: Include <linux/err.h> header Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes This pull request fixes some more regressions on legacy DaVinci board support due to GPIO driver clean-up introduced in v4.20 kernel. These are marked for stable. Also has fixes for some long standing Audio issues on DA850 boards. * tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Correct the sound card name ARM: dts: da850-lcdk: Correct the audio codec regulators ARM: dts: da850-evm: Correct the sound card name ARM: dts: da850-evm: Correct the audio codec regulators ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries ARM: davinci: dm355-evm: fix label names in GPIO lookup entries ARM: davinci: da850-evm: fix label names in GPIO lookup entries ARM: davinci: da830-evm: fix label names in GPIO lookup entries Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v5.0 Renesas SoCs: * Fix build regressions caused by move of Kconfig symbols RZ/G2E (r8a774c0) SoC: * Correct initialization order of 3DG-{A,B} in SYSC driver * tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B} ARM: shmobile: fix build regressions Signed-off-by:
Olof Johansson <olof@lixom.net>
-
John Hubbard authored
Commit 49e54187 ("ata: libahci_platform: comply to PHY framework") uses the PHY_MODE_SATA, but that enum had not yet been added. This caused a build failure for me, with today's linux.git. Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding in the Marvell Berlin SATA PHY driver. Fix the build by: 1) Renaming Marvell's defined value to a more scoped name, in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA. 2) Adding the missing enum, which was going to be added anyway as part of [1]. [1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com Fixes: 49e54187 ("ata: libahci_platform: comply to PHY framework") Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Acked-by:
Jens Axboe <axboe@kernel.dk> Acked-by:
Olof Johansson <olof@lixom.net> Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 12 Jan, 2019 4 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph, with little fixes all over the map - Loop caching fix for offset/bs change (Jaegeuk Kim) - Block documentation tweaks (Jeff, Jon, Weiping, John) - null_blk zoned tweak (John) - ahch mvebu suspend/resume support. Should have gone into the merge window, but there was some confusion on which tree had it. (Miquel) * tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits) ata: ahci: mvebu: request PHY suspend/resume for Armada 3700 ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs ata: ahci: mvebu: remove stale comment ata: libahci_platform: comply to PHY framework loop: drop caches if offset or block_size are changed block: fix kerneldoc comment for blk_attempt_plug_merge() nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps block: doc: add slice_idle_us to bfq documentation block: clarify documentation for blk_{start|finish}_plug ...
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "Minor fixes for new code, corner cases, and documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed Documentation/virtual/kvm: Update URL for AMD SEV API specification KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range() kvm: sev: Fail KVM_SEV_INIT if already initialized KVM: validate userspace input in kvm_clear_dirty_log_protect() KVM: x86: Fix bit shifting in update_intel_pt_cfg
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull more drm fixes from Daniel Vetter: "Dave sends out his pull, everybody remembers holidays are over :-) Since Dave's already in weekend mode and it was quite a few patches I figured better to apply all the pulls and forward them to you. Hence here 2nd part of bugfixes for -rc2. nouveau: - backlight fix - falcon register access fix - fan fix. i915: - Disable PSR for Apple panels - Broxton ERR_PTR error state fix - Kabylake VECS workaround fix - Unwind failure on pinning the gen7 ppgtt - GVT workload request allocation fix core: - Fix fb-helper to work correctly with SDL 1.2 bugs - Fix lockdep warning in the atomic ioctl and setproperty" * tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/falcon: avoid touching registers if engine is off drm/nouveau: Don't disable polling in fallback mode drm/nouveau: register backlight on pascal and newer drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR drm/i915: init per-engine WAs for all engines drm/i915: Unwind failure on pinning the gen7 ppgtt drm/i915: Skip the ERR_PTR error state drm/i915: Disable PSR in Apple panels gpu/drm: Fix lock held when returning to user space. drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2 drm/i915/gvt: Fix workload request allocation before request add
-
- 11 Jan, 2019 3 commits
-
-
Miquel Raynal authored
A feature has been added in the libahci driver: the possibility to set a new flag in hpriv->flags to let the core handle PHY suspend/resume automatically. Make use of this feature to make suspend to RAM work with SATA drives on A3700. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Miquel Raynal authored
A3700 comphy initialization is done in the firmware (TF-A). Looking at the SATA PHY initialization routine, there is a comment about "vendor specific" registers. Two registers are mentioned. They are not initialized there in the firmware because they are AHCI related, while the firmware at this location does only PHY configuration. The solution to avoid doing such initialization is relying on U-Boot. While this work at boot time, U-Boot is definitely not going to run during a resume after suspending to RAM. Two possible solutions were considered: * Fixing the firmware. * Fixing the kernel driver. The first solution would take ages to propagate, while the second solution is easy to implement as the driver as been a little bit reworked to prepare for such platform configuration. Hence, this patch adds an Armada 3700 configuration function to set these two registers both at boot time (in the probe) and after a suspend (in the resume path). Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Miquel Raynal authored
At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-